prtSonetVcRxSignalLabel
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.2
Object
column
OctetString
Signal Label received from network.
For VC-3:
The SONET standard defines the C2 byte as
the path signal label. The purpose of this byte is to
communicate the payload type being encapsulated by the
SONET Framing OverHead. It allows a single interface to
transport multiple payload types simultaneously.
For VC-12, VT-1.5:
VT path overhead V5 byte allocates bits 5-7 for
VT Path Signal Label, to indicate the content of the VT SPE.
000 - Unequipped
001 - Equipped - non specific payload
010 - Asynchronous Mapping
011 - Bit Synchronous Mapping (no longer used)
100 - Byte Synchronous Mapping (TU11 or TU12)
101 - Extended Signal Label for Virtual
Concatenation Applications (FCD-155 Default)
110 - Test Signal (0.181) (ITU)
111 - VC AIS (ITU)
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtSonetVcStatEntry
- Table
- prtSonetVcStatTable
- Siblings
- 13
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtSonetVcRxJPathTrace Jy Path Trace value received from network.
y=1, 2:
J1 - for VC-4 layer
J2 - for VC-12 layer. | column | OctetString | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.1 |
| prtSonetVcLoopStatus This variable indicates Loop Status. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.10 |
| prtSonetVcLcasTxStateMachineStatus LCAS State machine status. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.11 |
| prtSonetVcLcasRxStateMachineStatus LCAS State machine status. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.12 |
| prtSonetVcMFLengthErrorCounter Counts the multi-frames that had wrong length (shorter or longer) | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.13 |
| prtSonetVcCntrlPktCRCErrorCounter Counts Number of Control Packet CRC errors | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.14 |
| prtSonetVcLcasSourceState Fixed - This is an indication that this end
uses fixed bandwidth (non-LCAS mode)
Add - This member is about to be added to the group
Norm - Norma… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.3 |
| prtSonetVcLcasSinkState Fixed - This is an indication that this end
uses fixed bandwidth (non-LCAS mode)
Add - This member is about to be added to the group
Norm - Norma… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.4 |
| prtSonetVcStatus This variable indicates the Status of the interface.
It contains failure state information.
The variable is a bit map represented as a sum, therefore, it
can represent multipl… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.5 |
| prtSonetVcRxSeqNumber This variable indeticates the LCAS Rx
sequence number of this VC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.6 |
| prtSonetVcTxSeqNumber This variable indicates the LCAS Tx sequence number of this VC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.7 |
| prtSonetVcMfiDiffDelay This variable indicates time difference (based on MFI field) from the
fastest channel (on which it will be 0), in miliSeconds units | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.8 |
| prtSonetVcLoMF This variable indicates loss of Multiframe defect. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.9 |