prtInPh1MlFrWindowSize
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.16
Object
column
r/w
Integer32
This object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR and FR+ protocols AND only when prtInPh1MlFrMngProt is NOT (notApplicable or none). 0=notApplicable.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.2.3.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtInPh1MlCnfgEntry
- Table
- prtInPh1MlCnfgTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtInPh1MlCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.1 |
| prtInPh1MlTc This attribute indicates the Tc parameter which is the time
period of the sliding window in which the Bc/Be are tested.
The value of this parameter is identical for all the ports … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.10 |
| prtInPh1MlFlowControl This attribute indicates the required flow control betweeen
the port and the remote equipment. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.11 |
| prtInPh1MlSegment This object is the Segmentation in Bytes.
In protocol FR+, ISDN internals, MX 30/300 the segmentation is:
50 (2) ,158 (3) ,266 (4) ,376 (5), 484 (6)
… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.12 |
| prtInPh1MlFrMngProt This object indicates the Frame-Relay management protocol.
ansiT1 = ANSI T1.617 Annex D (this is the default value).
This parameter is applicable only for FR and FR+ protocols.
Wh… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.13 |
| prtInPh1MlEnqPeriod This object is the Status Enquiry Period, in seconds.
It determines the frequency of the Status Enquiry message
as sent by the FR user side.
At the FR network side, it determines … | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.14 |
| prtInPh1MlFullRptPeriod This object is the Full Report Frequency.
It determines the number of the Status Enquiry messages
sent by the FR user side, before a Full Report Request is
sent.
The units are : S… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.15 |
| prtInPh1MlErrorsThreshold This object is the Max Errors.
It determines the number of Status Enquiry Errors that
occured within the FR sliding window, before this port is
considered DOWN (threshold).
This p… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.17 |
| prtInPh1MlMaxIdleTime Move to higher prioritized connected link after this period of
seconds of silence on the current link.
0=Never. Never move to higher prioritized connected link.
UNIT is seconds… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.18 |
| prtInPh1MlBearerCh Defines which B (bearer) channels are used for transferring ISDN data.
Default value is: none (255).
anyChannel (2) is skipped because it is not in use here. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.19 |
| prtInPh1MlSltType This attribute indicates a unique slot position where
the card is inserted.
For ISDN BRI port of MX300/30:
io1(5) = isdn1(5) and io2(6) = isdn2(6)
In the ?004 Unit the entries i… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.2 |
| prtInPh1MlAssociatedExCh This object indicates the external port associated to this internal
port. At present, it is used by the Hybrid (mp2100h), MHS-4 cards which
can have up to 64 dynamic internal port… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.20 |
| prtInPh1MlClockEncoding This object is the Encoding type of the Line.
This parameter is applicable only for FR and FR+ protocols. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.21 |
| prtInPh1MlMinSeparators Minimum number of bytes separating between two adjacent frames (HDLC item).
0 = notApplicable | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.22 |
| prtInPh1MlCcittCrc This object indicates how many Bits are used for CRC (HDLC item). | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.23 |
| prtInPh1MlFrameSeparator This object indicates what should be transferred on the line when there
are no frames to pass (HDLC item).
idles: mean that FF will pass on the line
flags: mean that 7E will pass … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.24 |
| prtInPh1MlPrtIdx This attribute indicates a unique port number.
MPH.1/E1 and MPH.1/T1 cards have three internal interfaces.
MX3000 modules may have up to 50 internal ports. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.3 |
| prtInPh1MlConnect This attribute indicates whether the port should be
considered in any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.4 |
| prtInPh1MlRate This attribute indicates the port speed. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.5 |
| prtInPh1MlProtocol This attribute indicates the applied protocol. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.6 |
| prtInPh1MlConnectionTyp This attribute indicates the link connection type.
It is required for three reasons:
FR/CR Inband management operation (LMI,CLMM...).
CIR check.
NMS network management.
… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.7 |
| prtInPh1MlCongResponse This attribute indicates how to handle the congestion indication
to/from the mux internal connection side (for example
transmit/receive becn to/from the network).
no -… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.8 |
| prtInPh1MlCongLevel This attribute indicates the level of delayed data in
precents of the total available dynamic memory,
for which the port will start to operate .
The resolution of the parameter is… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.2.3.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtExPhPlCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.1 |
| prtExPhPlSltIdx This attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.2 |
| prtExPhPlPrtIdx This attribute indicates a unique port number.
In case of PH.1 card, only exPrt(1) is valid. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.3.1.1.3 |