prtVc2CnfgIdx

RAD-MIB · .1.3.6.1.4.1.164.3.2.3.2.5.1.1

Object

column Integer32

This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx  255 relates to the TmpCnfg

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.2.3.2.5.1.1
Type: column
Access: readonly
Status: current
Parent: prtVc2CnfgEntry
Table: prtVc2CnfgTable
Siblings: 39

Syntax

Integer32

Values & Constraints

Enumerated Values

`1`	r1x56eq56Kbps
`2`	r1x64eq64Kbps
`3`	r2x56eq112Kbps
`4`	r2x64eq128Kbps
`5`	r3x56eq168Kbps
`6`	r3x64eq192Kbps
`7`	r4x56eq224Kbps
`8`	r4x64eq256Kbps
`9`	r5x56eq280Kbps
`10`	r5x64eq320Kbps
`11`	r6x56eq336Kbps
`12`	r6x64eq384Kbps
`13`	r7x56eq392Kbps
`14`	r7x64eq448Kbps
`15`	r8x56eq448Kbps
`16`	r8x64eq512Kbps
`17`	r9x56eq504Kbps
`18`	r9x64eq576Kbps
`19`	r10x56eq560Kbps
`20`	r10x64eq640Kbps
`21`	r11x56eq616Kbps
`22`	r11x64eq704Kbps
`23`	r12x56eq672Kbps
`24`	r12x64eq768Kbps
`25`	r13x56eq728Kbps
`26`	r13x64eq832Kbps
`27`	r14x56eq784Kbps
`28`	r14x64eq896Kbps
`29`	r15x56eq840Kbps
`30`	r15x64eq960Kbps
`31`	r16x56eq896Kbps
`32`	r16x64eq1024Kbps
`33`	r17x56eq952Kbps
`34`	r17x64eq1088Kbps
`35`	r18x56eq1008Kbps
`36`	r18x64eq1152Kbps
`37`	r19x56eq1064Kbps
`38`	r19x64eq1216Kbps
`39`	r20x56eq1120Kbps
`40`	r20x64eq1280Kbps
`41`	r21x56eq1176Kbps
`42`	r21x64eq1344Kbps
`43`	r22x56eq1232Kbps
`44`	r22x64eq1408Kbps
`45`	r23x56eq1288Kbps
`46`	r23x64eq1472Kbps
`47`	r24x56eq1344Kbps
`48`	r24x64eq1536Kbps
`49`	r25x56eq1400Kbps
`50`	r25x64eq1600Kbps
`51`	r26x56eq1456Kbps
`52`	r26x64eq1664Kbps
`53`	r27x56eq1512Kbps
`54`	r27x64eq1728Kbps
`55`	r28x56eq1568Kbps
`56`	r28x64eq1792Kbps
`57`	r29x56eq1624Kbps
`58`	r29x64eq1856Kbps
`59`	r30x56eq1680Kbps
`60`	r30x64eq1920Kbps
`61`	r31x56eq1736Kbps
`62`	r31x64eq1984Kbps
`63`	r32Kbps

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtExVc2Oos This object is equal for all the ports in the specific card because of HW limitations	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.10`
prtExVc2LinkTo deprecated This attribute indicates the slot of the ML card to which the VC card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.11`
prtExVc2OperMode This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.12`
prtExVc2SigProfile This object indicates the Signaling Profile of the port. notApplicable - for VC-2 family and when prtExVc2Sig=noSignaling(1) p1 = profile 1 p2 = profile 2 p3 = pro…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.13`
prtExVc2CallEnable This object indicates the Enabled Call direction. notApplicable - for all cards except VC-2/R2. both - incoming + outgoing.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.14`
prtExVc2R2Delay This object indicates the R2 Delay. notApplicable - for all cards except VC-2/R2.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.15`
prtExVc2CasStd This object indicates the CAS (Channel Associated Signaling) Standard. notApplicable - for all cards except VC-2/R2.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.16`
prtExVc2EchoCanceler Echo canceler activation. notApplicable - for VC-2 and VC-6 cards.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.17`
prtExVc2IfType Interface Type.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.18`
prtExVc2Encoding Voice Encoding Mode. linear - is relevant only for the ports of VC-16A card.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.19`
prtVc2SltIdx This attribute indicates a unique slot position where the card is inserted. For Stand Alone products like WR: notApplicable (255)	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.2`
prtExVc2TxBitCode - - - For MP & FCD - - - This object represents 4 parameters, by 2 Octets : Tx D Bit Code-MSB nibble, Tx C Bit Code- nibble, Tx B Bit Code- nibble, Tx A Bit C…	column	OctetString	`.1.3.6.1.4.1.164.3.2.3.2.5.1.20`
prtExVc2RxBitOutput - - - For MP (VC-Q card only) & FCD - - - This object represents 3 parameters by 2 Octets: Spare -MSB nibble, always=0 hex E Lead Output - nibble, Reverse Polar…	column	OctetString	`.1.3.6.1.4.1.164.3.2.3.2.5.1.21`
prtExVc2MeterRate This entry is applicable only for VC-6A/FXO, VC-6A/FXS, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS. Meter Rate means rate of Call Meter in Public Phones, in KHz units. For some c…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.22`
prtExVc2IfSignaling This entry is applicable only for VC-6A, VC-6AG, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS cards. Interface Analog Signaling. Must be the same for all card's ports. loopStart - …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.23`
prtExVc2SeizeAck This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook signal it will transmit…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.24`
prtExVc2EandMType This is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.25`
prtExVc2RemType Remote Type. Applicable for VC-6A/4LB card & for IPMUX-1E Far End Type - E1,T1(T1-ESF) or T1-D4 .	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.26`
prtExVc2ConvTime Conversation Time in minutes. Applicable for VC-6A/4LB card.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.27`
prtExVc2SigFeedback Signaling Feedback. Applicable for VC-8/FXO and VC-16/FXO cards.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.28`
prtExVc2EchoCancelerModule This parameter indicates whether Echo canceler module exists for this port.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.29`
prtVc2PrtIdx A unique identifier of the port, within the card. For MP-2100/2200 card ports, Web Ranger and FCD-IP Voice ports the values will be: exPrt1 (1) exPrt2 (2) exPrt3 (…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.5.1.3`
prtExVc2ReversePolarity This object Enables/Disables Reverse Polarity for this port.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.30`
prtExVc2RingerFrequency This object selects the Ringer Frequency (Hz) for this port.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.31`
prtExVc2SigService Signaling Service. advanced - is relevant only for ports of VC-8, VC-16 FXS cards. It is used for Signaling Services of V5.1 or R2.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.32`
prtExVc2CallerIdEnable This object Enables/Disables Receiving the Caller Id number from the remote side, for this port/channel.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.33`
prtExVc2CompressMethod This object is applicable only when prtExVc2Encoding=adpcm. It defines which method is used for Compression. g726 - for 4 bits (the standard method). g726 - for 3 bits. It is espe…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.34`
prtExVc2ObMode This object defines the Net operation mode of the Omni-Bus card's port. pointToPoint - only 2 end-point ports talk; like any other voice card omniBus - many talk and listen. …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.35`
prtExVc2VAD This object defines whether Voice Activation Detector (VAD) will be On or Off. off - will be usually selected when a Modem is connected to the port; not a phone. not…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.36`
prtExVc2NoiseLevelForVAD This object defines the Level of Noise on the line, the Voice Activation Detector (VAD) will have to deal with. notApplicable - when prtExVc2VAD=off.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.37`
prtExVc2WesternSigMode This object defines the Western Signaling Mode. detector - detects signal and passes it as is. generator - generates the signal. notApplicable - when Western HW is not installed.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.38`
prtExVc2BusProtectionPoint This object defines if the port is Bus Protection Point or not. notApplicable - when prtExVc2DspMode=pointToPoint. When we have a chain of devices where the edge devices ports are…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.39`
prtExVc2Connect This attribute indicates whether the port should be considered in any of the mux algorithms.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.4`
prtExVc2ImpedanceStandard This object defines the Standard used for Impedance. -G.712 - 600 Ohm - used in USA and other countries. -Q552/ETSI - used in some countries in Europe -Q522/Italy - used in Italy.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.40`
prtExVc2TransGain Transmit gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be in 0.5dBm steps.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.5.1.5`
prtExVc2ReceiveGain Receive gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be in 0.5dBm steps.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.5.1.6`
prtExVc2Wire For some cards, this object is equal for all the ports in the specific card because of HW limitations. For FXO & FXS this parameter is not applicable.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.7`
prtExVc2CodingLaw This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for T1 links. …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.8`
prtExVc2Sig This attribute indicates the method for decoding/encoding the signaling information(on/off hook). noSignaling (1) - not using signaling (only voice). robbedBitMultiFrame(2)…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.9`