pktSwchPhyInterfaceProtocolS – RAD-MIB

Object

column r/w Enumeration

The protocol to be used on this link.
              
Note for PPP:
PPP protocol is allowed to be applied on Sync Links (1-3)
as well as Async channels (1-24).
In order to eliminate ambiguity in the IP destination where
a destination of P1 can be used for example for async channel 1
and Sync Link 1, it was decided NOT TO ALLOW configuring PPP on both
Sync Link no. 1 and async channel 1. Same for Link 2 and
Link 3.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.8.3.1.2
Type: column
Access: readwrite
Status: current
Parent: pktSwchPhyInterfaceEntry
Table: pktSwchPhyInterfaceTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	cug
`2`	cugOa
`3`	cugIa
`4`	cugOaIa
`5`	noPref
`255`	noCug

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pktSwchPhyInterfaceIfIndex The ifIndex identified with this link.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.8.3.1.1`
pktSwchPhyInterfaceTestCmd START/STOP a test on the current interface. The available tests are: v54Local - Local Analog Loopback (AL), L3 according to ITU-T standard. v54Remote - Remote Digital Loopback(…	column	Enumeration	`.1.3.6.1.4.1.164.8.3.1.10`
pktSwchPhyInterfaceTestTransmittedFrames No. of frames which were transmitted from this interface during the TEST.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.164.8.3.1.11`
pktSwchPhyInterfaceTestReceivedFrames No. of frames which were received on this interface during the TEST.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.164.8.3.1.12`
pktSwchPhyInterfaceTestLostFrames Percentage of the frames which were lost during the TEST.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.8.3.1.13`
pktSwchPhyInterfaceProtocolA The protocol currently used on this link.	column	Enumeration	`.1.3.6.1.4.1.164.8.3.1.3`
pktSwchPhyInterfaceCopyTo The destination interface number, to which the Copy is performed.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.8.3.1.4`
pktSwchPhyInterfaceChanged Indicates if the current running protocol is different than the defined protocol	column	Enumeration	`.1.3.6.1.4.1.164.8.3.1.5`
pktSwchPhyInterfaceRxBuffInPool The free data buffers in the Rx pool per interface	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.8.3.1.6`
pktSwchPhyInterfaceConnector The connector type of the interface	column	Enumeration	`.1.3.6.1.4.1.164.8.3.1.7`
pktSwchPhyInterfaceNeighborIp The Ip address of the device on the other side of the link.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.164.8.3.1.8`
pktSwchPhyInterfaceProtocolStatus The status of the Interface Protocol row in the Table.	column	Enumeration	`.1.3.6.1.4.1.164.8.3.1.9`