hdlcFlowControl
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.5.1.1.7
Object
column
r/w
Enumeration
Enable/Disable the CTS/RTS flow control signals.
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hdlcProtocol The HDLC protocol type
V35 - HDLC encapsulated over V35
X21 - HDLC encapsulated over X21
RS530 - HDLC encapsulated over RS530
cisco - Compatible to Cisco HDLC format.
lapd … | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.5.1.1.1 |
| hdlcLOF Total number of seconds the port is in Loss Of Frame state. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.3.1.6.5.1.1.10 |
| hdlcRxClockPolarity normal - The received data is sampled at the middle of bit time
inverse - The received data is sampled at the end of the bit time
(high data rate/long cable). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.5.1.1.11 |
| hdlcRateCompatibility This parameter defines whether limit the port HDLC rate according to the Far-End device.
For exaple: limit the HDLC rate from 4000 PPS and 3000 PPS. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.5.1.1.12 |
| hdlcRateResolution The baud rate of the internal clock. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.5.1.1.2 |
| hdlcTxClockSource The baud rate of the internal clock. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.5.1.1.3 |
| hdlcTerminalMode . | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.5.1.1.4 |
| hdlcLoopbackState internal - All data coming from the
network port is looped back
external - All data comming from the line is
looped back. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.5.1.1.5 |
| hdlcTxClockPolarity normal - The transmitted data is sampled at the middle of bit time
inverse - The transmitted data is sampled at the end of the bit time
(high data rate/long cable). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.5.1.1.6 |
| hdlcLineRate The rate values for HDLC are n*56/64Kbps, where 1<=n<=32, 64, 128
and the following values: 1544, 3088, 6176.
The rate values for HSSI is nMbps, where 1<=n<=52. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.5.1.1.8 |
| hdlcRxClockMode . | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.5.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| v51VarCfgIndex This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg.
1 = Current Cnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.1 |
| v51VarCfgSltIdx Slot Index.
For V5.2, this index will be the Slot of the V5.2 Master ML. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.2 |
| v51VarCfgPrtIdx This attribute indicates a unique port number of the ML having
V5 interface.
Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104)
notApplicable(255) - for V5.2 only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.3 |
| v51VarCfgIdx Variant Id.
Valid values:
- for Current Cnfg: 0..127
- for Tmp Cnfg: until MP R9 : 255 only.
from MP R10: 0..127. | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.4 |
| v51VarCfgTsIdx For V5.1: Time Slot index (1..31).
For V5.2: Running Index (1..1320) for Address Table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.5 |