pktSwchSnaPULlc2FrXIDIdBlkA
RAD-MIB ·
.1.3.6.1.4.1.164.8.11.12.1.7
Object
column
OctetString
Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDBLK is required for PU with Local XID handling or PU with End-to-End XID handling, NO Support for NON-Activation XID. Up to 3 Hexadecimal digits, format: 0X XX.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.11.12.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pktSwchSnaPULlc2FrEntryA
- Table
- pktSwchSnaPULlc2FrTableA
- Siblings
- 15
Syntax
OctetString
Values & Constraints
Enumerated Values
3 | bridging |
4 | ip |
7 | ip-and-bridging |
8 | llc |
11 | llc-and-bridging |
12 | ip-and-llc |
15 | all |
255 | none |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchSnaPULlc2FrNumberA Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.12.1.1 |
| pktSwchSnaPULlc2FrTxWindowA The LLC2 Link Window Size. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.12.1.10 |
| pktSwchSnaPULlc2FrLinkA The SPS Frame Relay Link Number which this LLC2 Protocol Interface is associated with. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.12.1.11 |
| pktSwchSnaPULlc2FrDLCIA The SPS Frame Relay DLCI Number which this LLC2 Protocol Interface is associated with. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.12.1.12 |
| pktSwchSnaPULlc2FrXIDInitiationA This parameter is not applicable for PU with Local XID handling.
Legal values:
1 - Do not initiate an XID message.
2 - Initiate an XID message to LLC2. | column | Enumeration | .1.3.6.1.4.1.164.8.11.12.1.13 |
| pktSwchSnaPULlc2FrN2CountA N2 Count | column | Integer32 | .1.3.6.1.4.1.164.8.11.12.1.14 |
| pktSwchSnaPULlc2FrT1TimerA T1 Timer in 1/10 of a second. | column | Integer32 | .1.3.6.1.4.1.164.8.11.12.1.15 |
| pktSwchSnaPULlc2FrTiTimerA TI Timer in seconds | column | Integer32 | .1.3.6.1.4.1.164.8.11.12.1.16 |
| pktSwchSnaPULlc2FrSideA Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not. | column | Enumeration | .1.3.6.1.4.1.164.8.11.12.1.2 |
| pktSwchSnaPULlc2FrEncapsTypeA Indicates if the LLC2/RFC1490 Protocol Interface uses the BNN, BAN
or TREN method of Frame Encapsulation. | column | Enumeration | .1.3.6.1.4.1.164.8.11.12.1.3 |
| pktSwchSnaPULlc2FrDestMACA The LLC2 Destination MAC Address. | column | OctetString | .1.3.6.1.4.1.164.8.11.12.1.4 |
| pktSwchSnaPULlc2FrSrcSAPA The LLC2 Source SAP Address. | column | OctetString | .1.3.6.1.4.1.164.8.11.12.1.5 |
| pktSwchSnaPULlc2FrDestSAPA The LLC2 Destination SAP. | column | OctetString | .1.3.6.1.4.1.164.8.11.12.1.6 |
| pktSwchSnaPULlc2FrXIDIdNumA Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The IDNUM is required for PU with Local XID handling
or PU with End-to-End XID handling, NO S… | column | OctetString | .1.3.6.1.4.1.164.8.11.12.1.8 |
| pktSwchSnaPULlc2FrMaxPiuSizeA Maximum Path Information Size | column | Integer32 | .1.3.6.1.4.1.164.8.11.12.1.9 |