pktSwchHdlcNrzModeS
RAD-MIB ·
.1.3.6.1.4.1.164.8.5.1.1.16
Object
column
r/w
Integer32
The data encoding format. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 NRZ 1 NRZI 2 Transmit Idles between frames and control the RTS pin 4 Normal Operation (DCD, CTS lines under automatic control) XX Any combination of the values specified above.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.5.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pktSwchHdlcSEntry
- Table
- pktSwchHdlcSTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Enumerated Values
2 | no-Detect |
3 | linkFailure-Detect |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchHdlcLinkNumberS The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceNumber. There is an entry for
each link for which the pktSwchPhyInterfaceProtoc… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.5.1.1.1 |
| pktSwchHdlcDestDlciS The local DLCI which is used for HDLC encapsulation over Frame Relay.
Range: 16...991 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.5.1.1.10 |
| pktSwchHdlcDestPortS The local port that is used for HDLC encapsulation over Frame Relay.
Range: 1...12 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.5.1.1.11 |
| pktSwchHdlcProtocolS The HDLC protocol type. | column | Enumeration | .1.3.6.1.4.1.164.8.5.1.1.12 |
| pktSwchHdlcFlowContOptionsS This specifies the type of flow control of the HDLC link. The value
is a sum of values (powers of two), where each value in the sum
represents an option. The values that may be … | column | Integer32 | .1.3.6.1.4.1.164.8.5.1.1.13 |
| pktSwchHdlcBufferFlowControlS The number of buffers that will be allocated for the HDLC link. Default value is 10 | column | Integer32 | .1.3.6.1.4.1.164.8.5.1.1.14 |
| pktSwchHdlcInternalClockS The baud rate of the internal clock. | column | Enumeration | .1.3.6.1.4.1.164.8.5.1.1.15 |
| pktSwchHdlcDestAddrS The destination address. It defines the X.25 address on the remote
device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.8.5.1.1.2 |
| pktSwchHdlcDestSubAddrS The destination subaddress. It defines the synchronous link subaddress
on the remote device. | column | Integer32 | .1.3.6.1.4.1.164.8.5.1.1.3 |
| pktSwchHdlcRedialTimeoutS The time interval in seconds between two consecutive connect
operations retries. | column | Integer32 | .1.3.6.1.4.1.164.8.5.1.1.4 |
| pktSwchHdlcRedialRetriesS This defines how many times the call operation is repeated if the
call request has failed. | column | Integer32 | .1.3.6.1.4.1.164.8.5.1.1.5 |
| pktSwchHdlcInactivityS The amount of time in minutes of inactivity that will cause the
session to disconnect. | column | Integer32 | .1.3.6.1.4.1.164.8.5.1.1.6 |
| pktSwchHdlcX25FacilitiesS This specifies the X.25 facilities. The value is a sum of values
(powers of two), where each value in the sum represents an option.
The values that may be included in the sum and… | column | Integer32 | .1.3.6.1.4.1.164.8.5.1.1.7 |
| pktSwchHdlcLocalSubaddr1S The first local subaddress. | column | Integer32 | .1.3.6.1.4.1.164.8.5.1.1.8 |
| pktSwchHdlcLocalSubaddr2S The secondary local subaddress. | column | Integer32 | .1.3.6.1.4.1.164.8.5.1.1.9 |