agnCBuMlOamTimeoutCycles
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.2.2.12.1.7
Object
No. of cycles the Link will send OAM packets without receiving a response from the remote Link before switching to the Backup Link.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.2.2.12.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agnCBuMlEntry
- Table
- agnCBuMlTable
- Siblings
- 8
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agnCBuMlCnfgIdx This object indicates the Index of the Configuration database (1..255) being
accessed. Index of 255 relates to the Temporary Configuration. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.2.12.1.1 |
| agnCBuMlRole The Role of the Link. Primary Link is the Link that should usually work.
If the Primary Link fails, the data will go through the Secondary Link.
If both Primary and Secondary Link… | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.2.12.1.2 |
| agnCBuMlType The Type of the Link.
For E1/T1 the Link can be Link A - e1T1a or Link B - e1T1b.
For ETH-NET, eth (5) can be used.
For ETH-NET/USER ethNetUser (6) can be used. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.2.12.1.3 |
| agnCBuMlDefaultGateway Default Gateway's IP Address. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.3.1.2.2.12.1.4 |
| agnCBuMlSubnetMask The Link subnet mask. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.3.1.2.2.12.1.5 |
| agnCBuMlOamFrequency Time in sec. between 2 OAM packets. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.2.12.1.6 |
| agnCBuMlWaitToRestore This object defines traffic recovery time (in milliseconds)
of the link after its recovery.
This object is applicable only when Recovery Mode is revertive. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.2.2.12.1.8 |
| agnCBuMlBfdSessionNum This object defines the BFD (Bidirectional Forwarding Detection) session number of the link.
When no session exists or when N/A, the value will be 0. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.2.2.12.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| agnXCmprTypIdx This attribute indicates the Type of the Compressed being
referred.
One of the types is V5.1 Variant data. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.3.7.1.1 |
| agnXCmprVersion This attribute indicates the version of the internal format of
the Compressed data. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.3.7.1.2 |
| agnXCmprIdx3 3rd index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant, this attribute indicates the configuration
to which the Compressed information… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.3.7.1.3 |
| agnXCmprIdx4 4th index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant,this attribute indicates a unique number of
the slot position where the card i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.3.7.1.4 |
| agnXCmprIdx5 5th index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant,this attribute indicates a unique identifier
of the port the compressed infor… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.3.7.1.5 |
| agnXCmprIdx6 6th index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant,this attribute indicates the Variant index.
Valid values are: 0..127, 255 (= t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.3.7.1.6 |
| agnXCmprIdx7 7th index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant,this attribute is not needed. Therefore, its
value will be always 255=notAppli… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.3.7.1.7 |