sysCClkStationIf
RAD-MIB ·
.1.3.6.1.4.1.164.3.3.1.6.1.1.7
Object
column
r/w
Enumeration
This entry indicates the electrical interface connected to the station clock, when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.3.1.6.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sysCClkSrcEntry
- Table
- sysCClkSrcTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysCClkCnfgIdx This attribute indicates the Idx of the Cnfg being
accessed ; Idx of 255 relates to the TmpCnfg.
It can be also a combination of the configuration number and the
Card/Port/Other… | column | Integer32 | .1.3.6.1.4.1.164.3.3.1.6.1.1.1 |
| sysCClkSsmBased This parameter indicates whether clock source
will be selected based on receive clock quality,
indicated in S1 byte inside SONET/SDH overhead,
(encoded as SSM - Synchronization… | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.1.1.10 |
| sysCClkSSubsystemSlot This entry indicates the Slot from which the S Subsytem Source
will be taken.
The value will be applicable only when the sysCClkSrcMode is
'sSubsystem'. | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.1.1.11 |
| sysCClkRecoveredID This entry indicates the Recovered Clock ID.
The value will be applicable only when sysCClkSrcMode is 'recovered'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.3.1.6.1.1.12 |
| sysCClkSrcIdx An index in the table. There are only two entries in the
table.
master - refers Master clock parameters
fallback - refers Fallback clock parameters | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.1.1.2 |
| sysCClkSrcMode This entry indicates the source the nodal timing is
locked to.
none - is an invalid option for Master clock.
internal - is an invalid option for Fallback clock .
station - i… | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.1.1.3 |
| sysCClkSrcPrt This entry is valid only when working in rxClk mode
(for IPmux1000 this entry will be valid whe working in LBT mode).
For ACE2002 in case of invalid entry the retur… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.1.6.1.1.4 |
| sysCClkStationFreq This entry indicates the frequency of the station clock
when the source is 'station'.
The value will be applicable only when the sysCClkSrcMode is
'station'. | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.1.1.5 |
| sysCClkRevertiveTimeout The time in seconds in which the system will monitor the higher
level clock source, before decision to revert to that clock.
In case the time is zero, revertive mode will be disab… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.1.6.1.1.6 |
| sysCClkStationCableMode This parameter indicates whether both Station clocks get their
clock from the same source (Y Cable)or each one get its clock independently.
The value will be applicable only whe… | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.1.1.8 |
| sysCClkStationOutState This parameter indicates whether station clock can
send its clock to another device.
The value will be applicable only when the sysCClkSrcMode is 'station'. | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.1.1.9 |