pktSwchFrCircuitDestIdS
RAD-MIB ·
.1.3.6.1.4.1.164.8.8.5.1.4
Object
If the DLCI destination protocol is none or async, this field has a value of an existing DLCI or async channel, respectively. Otherwise, a value of zero is used.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.8.5.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pktSwchFrCircuitSEntry
- Table
- pktSwchFrCircuitSTable
- Siblings
- 15
Values & Constraints
Object Constraints
range: 0-65000
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchFrCircuitIfIndexS This is the ifIndex of the circuit, according to RFC 1573. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.8.5.1.1 |
| pktSwchFrCircuitRxCommittedS The Rx committed rate in bytes per interval. | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.10 |
| pktSwchFrCircuitRxExcessS The Rx excess in bytes per interval. | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.11 |
| pktSwchFrCircuitFunnelIdS The funnel ID. | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.12 |
| pktSwchFrCircuitStatusS The status of the circuit row in the Table. | column | Enumeration | .1.3.6.1.4.1.164.8.8.5.1.13 |
| pktSwchFrCircuitExtendedDlciS The no. of the DLCI represented in 23 bits. | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.14 |
| pktSwchFrCircuitTxPriorityS DLCI TX Priority level. The levels are defined in the
pktSwchTxPriorityTable | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.15 |
| pktSwchFrCircuitIsdnRoutIdS ISDN destination. ID in the ISDN routing table containing
the outgoing ISDN address for this DLCI.
Default value: 0 for no ISDN routing ID. | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.16 |
| pktSwchFrCircuitIndexS This Index is the DLCI of the circuit. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.8.5.1.2 |
| pktSwchFrCircuitDestProtS The protocol encapsulation, if any, on this DLCI.
The MPE protocol is a proprietary RAD protocol that enables
a generic HDLC device to have multiple connections over X.25
or Frame… | column | Enumeration | .1.3.6.1.4.1.164.8.8.5.1.3 |
| pktSwchFrCircuitBackIdS The backup DLCI which is used when the current DLCI goes inactive.
The destination protocol and destination id are the same as in the
current DLCI | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.8.8.5.1.5 |
| pktSwchFrCircuitTxCirIntervalS The Tx CIR interval in 1/10 seconds. | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.6 |
| pktSwchFrCircuitTxCommittedS The Tx committed rate in bytes per interval. | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.7 |
| pktSwchFrCircuitTxExcessS The Tx excess in bytes per interval. | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.8 |
| pktSwchFrCircuitRxCirIntervalS The Rx CIR interval in 1/10 seconds. | column | Integer32 | .1.3.6.1.4.1.164.8.8.5.1.9 |