atmCbrCnfgService
RAD-MIB ·
.1.3.6.1.4.1.164.12.4.3.3.1.1.15
Object
column
r/w
Enumeration
Define if DSx service is structured or unstructured.
A structured(3) interface is some nx64Kbps. (n x DS0 = n Time Slots)
An unstructured (2) interface is full DSx, x >0.
(1.544Mbps, 2.048Mbps, 6.312Mbps, 44.736 Mbps, or 34.368 Mbps.)
This objects selects the connection type also
for AAL1 Stream for Data port.
The available selections depend on the data rate
selected.
For the 64 kbps rate:
STRUCTURED WITH POINTER = structure(4)
Use of the structured service as defined in ATMF AF-VTOA-0078.000.
STRUCTURED WITHOUT POINTER : same as above, but without
using a pointer (the resulting cell structure is similar
to that of the unstructured service cells).
Default: STRUCTURED WITH POINTER
structuredControlSignalsTransport -Pointer is used to
transfer Data Control Signals through ATM network.
For other rates:
STRUCTURED : Use of structured service as defined in ATMF AF-VTOA-0078.000.
UNSTRUCTURED : Use of unstructured service as defined in
ATMF document AF-VTOA-0078.000.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.4.3.3.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmCbrCnfgEntry
- Table
- atmCbrCnfgTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmCbrCnfgAtmIfIndex The ifIndex associated to the ATM interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.1 |
| atmCbrCnfgRxBytesPerCell number of bytes to be receive in order per cell to low the delay. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.10 |
| atmCbrCnfgTxTimeSlots This value indicates the time-slots used by this connection for receiving.
It uses 32 bits for E1 and low 24 bits for T1.
each bit represents a time slot for receiving :
time-slot… | column | TimeSlots | .1.3.6.1.4.1.164.12.4.3.3.1.1.11 |
| atmCbrCnfgTxBytesPerCell number of bytes to be transmit in order per cell to low the delay. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.12 |
| atmCbrCnfgParity Controls the use of pointer parity when using
the STRUCTURED or STRUCTURED WITH POINTER connection type.
as defined by atmCbrCnfgService.
ON - Pointer parity bit generat… | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.13 |
| atmCbrCnfgRowStatus This object is used to create a new row or
modify or delete an existing row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.12.4.3.3.1.1.14 |
| atmCbrCnfgAtmVpi The Vpi number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.2 |
| atmCbrCnfgAtmVci The Vci number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.3 |
| atmCbrCnfgCbrIfIndex The ifIndex associated to the logical interface of DS0s bundle
or to ifIndex of one of the data ports. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.4 |
| atmCbrCnfgAdminStatus The requested status of the connection. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.5 |
| atmCbrCnfgOperStatus The real operational status of the connection. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.6 |
| atmCbrCnfgLastChange The value of sysUpTime at the time the ATM to CBR
connection entered its mandatory operational state.
If the mandatory state was entered prior to the last
re-initialization of the… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.164.12.4.3.3.1.1.7 |
| atmCbrCnfgAAL1Signalling Not in use. Must be always 'off'. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.8 |
| atmCbrCnfgRxTimeSlots This value indicates the time-slots used by this connection for receiving.
It uses 32 bits for E1 and low 24 bits for T1.
each bit represents a time slot for receiving :
time-slot… | column | TimeSlots | .1.3.6.1.4.1.164.12.4.3.3.1.1.9 |