pktSwchSnaPUX25QllcCallUserDataFacilitiesA
RAD-MIB ·
.1.3.6.1.4.1.164.8.11.9.1.12
Object
column
OctetString
The X.25 facilities and Call User Data which the SPS uses on
outgoing calls. AutoCall only.
Up to 60 Hexa-Decimal digits.
Each pair of digits represents a BYTE.
BYTE-0 BYTE-1 BYTE-2 ... BYTE-29 (30 Bytes maximum)
BYTE-0 for X.25 Facilities. BYTE-1 to BYTE-29 for Call User Data.
Facilities (BYTE-0) format: PW (Hexa-Decimal), where:
X.25 L3 Packet Size Negotiation : [P=1 YES] [P=0 NO].
X.25 L3 Packet Window Negotiation : [W=1 YES] [W=0 NO].
Legal Values for Facilities BYTE-0 : 10, 01, 11, 00 (Hex).
ATTENTION: a. Total number of digits in this field must be EVEN.
b. To clear this field, enter blanks or 00.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.11.9.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pktSwchSnaPUX25QllcEntryA
- Table
- pktSwchSnaPUX25QllcTableA
- Siblings
- 11
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchSnaPUX25QllcNumberA This parameter defines an identifier associated with the PU Entry
X25\QLLC side, which is unique within the SPS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.9.1.1 |
| pktSwchSnaPUX25QllcAutoCallA This parameter indicates whether the SPS automatically initiates
an X.25 call request or not. | column | Enumeration | .1.3.6.1.4.1.164.8.11.9.1.10 |
| pktSwchSnaPUX25QllcCalledAddressA The destination x.25 DTE address to which the SPS calls. Used
with AutoCall only. | column | OctetString | .1.3.6.1.4.1.164.8.11.9.1.11 |
| pktSwchSnaPUX25QllcSideA Is there side A or B of the PU connection | column | Enumeration | .1.3.6.1.4.1.164.8.11.9.1.2 |
| pktSwchSnaPUX25QllcIdBlkA Part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idblk is required for secondary PU with Local XID
handling. Up to 3 Hexadecimal digits, format:… | column | OctetString | .1.3.6.1.4.1.164.8.11.9.1.3 |
| pktSwchSnaPUX25QllcIdNumA Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The Idnum is required for secondary PU with Local XID
handling. Up to 5 Hexadecimal digits, … | column | OctetString | .1.3.6.1.4.1.164.8.11.9.1.4 |
| pktSwchSnaPUX25QllcXIDInitA This parameter is not applicable for PU with Local XID handling.
Legal values:
1 - Do not initiate an XID message.
2 - Initiate an XID message to QLLC. | column | Enumeration | .1.3.6.1.4.1.164.8.11.9.1.5 |
| pktSwchSnaPUX25QllcMaxPiuSizeA Maximum Path Information Size | column | Integer32 | .1.3.6.1.4.1.164.8.11.9.1.6 |
| pktSwchSnaPUX25QllcStationAddressA QLLC PU Link Station Address. Range: 0x01-0xFE.
This parameter is applicable only for PU with End-to-End XID handling,
Support for NON-Activation XID. | column | OctetString | .1.3.6.1.4.1.164.8.11.9.1.7 |
| pktSwchSnaPUX25QllcInPasswordA A field matched with the call user data in call request packets for
purposes of security and correlation. | column | OctetString | .1.3.6.1.4.1.164.8.11.9.1.8 |
| pktSwchSnaPUX25QllcSubAddressA The X.25 Sub-address associated with the PU Entry for routing
incoming call indications. Range: 0-99. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.9.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchSnaPULlc2FrNumberA Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.12.1.1 |
| pktSwchSnaPULlc2FrSideA Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not. | column | Enumeration | .1.3.6.1.4.1.164.8.11.12.1.2 |