prtBertPattern

RAD-MIB · .1.3.6.1.4.1.164.3.3.3.1.5.1.2

Object

column r/w Enumeration

This object indicates the pattern of the BERT.
p2Exxm1 = 2Exx-1.
pxx     = pattern xx.
This object is the same for all configurations.
notApplicable - when this object is not supported.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.3.3.1.5.1.2
Type: column
Access: readwrite
Status: current
Parent: prtBertEntry
Table: prtBertTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`3`	clA
`4`	clB
`5`	io1
`6`	io2
`7`	io3
`8`	io4
`9`	io5
`10`	io6
`11`	io7
`12`	io8
`13`	io9
`14`	io10
`15`	io11
`16`	io12
`17`	io13
`18`	io14
`19`	io15
`103`	kmxMlA
`104`	kmxMlB
`106`	kmxOpt
`107`	kmxIO1
`108`	kmxIO2
`109`	kmxIO3
`110`	kmxIO4
`111`	kmxIO5
`112`	kmxIO6
`113`	kmxIO7
`114`	kmxIO8
`115`	kmxIO9
`116`	kmxIO10
`117`	kmxIO11
`118`	kmxIO12
`255`	standAlone

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtBertPrtIdx This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, insi…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.3.1.5.1.1`
prtBertClearCounters Setting this object to ON, will enforce a clear operation of some BERT Counters. Upon completion, the value will automatically change to off(2).	column	Enumeration	`.1.3.6.1.4.1.164.3.3.3.1.5.1.10`
prtBertSyncStatus Sync Status while BERT runs.	column	Enumeration	`.1.3.6.1.4.1.164.3.3.3.1.5.1.11`
prtBertTs This object indicates on which TSs of the selected port, BERT should be applied. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be u…	column	OctetString	`.1.3.6.1.4.1.164.3.3.3.1.5.1.12`
prtBertResult This object indicates Result of BERT for the selected port (number of error bits divided to the total number of data bits.) Applicable only if BERT is running on this port …	column	OctetString	`.1.3.6.1.4.1.164.3.3.3.1.5.1.13`
prtBertTxBits How many data bits were transmitted since BERT started to run, or since last counter clear (prtBertClearCounters set to on).	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.3.1.5.1.14`
prtBertRxBits How many data bits were Received since BERT started to run, or since last counter clear (prtBertClearCounters set to on).	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.3.1.5.1.15`
prtBertTxErrorBits Number of injected error bits since BERT started to run, or since last counter clear (prtBertClearCounters set to on).	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.3.1.5.1.16`
prtBertInjectRate This object indicates the error rate injection of the BERT. r10Emx = 10E-x This object is the same for all configurations. single - single error injection. notApplicable - when th…	column	Enumeration	`.1.3.6.1.4.1.164.3.3.3.1.5.1.3`
prtBertInjectErrRateCmd This object controls activation/deactivation of the Error Rate Injection during BERT.	column	Enumeration	`.1.3.6.1.4.1.164.3.3.3.1.5.1.4`
prtBertInjectSingleErrCmd This object enables to initiate a Single Error Injection during BERT (on). Upon completion, the value will automatically change to off(2).	column	Enumeration	`.1.3.6.1.4.1.164.3.3.3.1.5.1.5`
prtBertRunTime This object indicates how much time (seconds) passed since BERT started to run.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.3.1.5.1.6`
prtBertESs How many Errored Seconds were detected since BERT started to run. Counter for Kmux and MP.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.3.1.5.1.7`
prtBertSyncLoss How many times Sync Loss was detected since BERT started to run. For some products: number of seconds in which Sync Loss occured since BERT started to run. See product specificat…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.3.1.5.1.8`
prtBertErrorBits How many Error Bits were detected since BERT started to run.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.3.1.5.1.9`