atmSuPortDataRate
RAD-MIB ·
.1.3.6.1.4.1.164.12.4.2.1.1.2
Object
column
r/w
Enumeration
This attribute indicates the operation rate of the port. AmcdT1 / Ace-20T allowes rates up to 1536KBps ( options 1-12 ), while AmcdE1 / Ace-20E allowes all options.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.4.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmSuPortDataCnfgEntry
- Table
- atmSuPortDataCnfgTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmSuPortDataApplication This attribute indicates the protocol application which runs
above the physical port. | column | Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.1 |
| atmSuPortDataInterfaceType Physical layer interface type. (Configureable or Non-Configureable) | column | Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.10 |
| atmSuPortDataClkPolarity This object indicates the clock polarity.
For LA-110/140 this object will be applicable only for
X.21/V.35/data port | column | Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.11 |
| atmSuPortDataCtsStatus CTS status - the signal state received from ATM network
(for the local DTE usage).
LA110 receiving RTS down from remote DTE device
via ATM network, will change CTS signal stat… | column | Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.12 |
| atmSuPortDataRtsStatus RTS status - the signal state received from local DTE
(to be forwarded to ATM network).
LA110 receiving RTS down from the local DTE device
will transmit all '1' to ATM (in… | column | Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.13 |
| atmSuPortDataDCD This attribute indicates if the bits CtsCd( Clear-to-send Carry-detect)
are being checked. In AMCD CTS is also checked.
off - ignore DCD signal
on - obey DCD signal | column | Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.3 |
| atmSuPortDataMode deprecated This attribute indicates the port mode of sampling data physical. | column | Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.4 |
| atmSuPortDataCRC This attribute indicates the type of CRC checking
on receiving/transmiting frames. | column | Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.5 |
| atmSuPortDataClock This attribute indicates the clock using for synchronization
for the data port. | column | Enumeration | .1.3.6.1.4.1.164.12.4.2.1.1.6 |
| atmSuPortDataMaxNoOfConns this object indicates the maximum number of cross-connect
connections allowed beetween the ATM port and the Data Port
identified by IfIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.2.1.1.7 |
| atmSuPortDataConfNoOfConns this object indicates the configured number of cross-connect
connections exist beetween the ATM port and the Data Port
identified by IfIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.2.1.1.8 |
| atmSuPortDataIdleCode This attribute is applicable only for application aal1Stream.
It indicates the value to be transmitted whenever the port is idle. | column | Integer32 | .1.3.6.1.4.1.164.12.4.2.1.1.9 |