pktSwchPppChanFlowCtlDuration

RAD-MIB · .1.3.6.1.4.1.164.8.15.2.1.2

MIB view Table view

Object

column r/w Integer32

Hardware Flow Control Duration.
1..254 - Duration (in 50ms intervals).
         when timer expires, flow control stops.
     0 - No Hardware flow control.
   255 - Continuous Flow Control.
Default value: 0.
For Sync Links, return 0.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.8.15.2.1.2
Type: column
Access: readwrite
Status: current
Parent: pktSwchPppChanEntry
Table: pktSwchPppChanTable
Siblings: 14

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pktSwchPppChanSpeed The port's speed in bits per second. For Async channels: Default value: 14 . For Sync Links: Use not_applicable(255) The Sync Links have an internal clock with different values.	column	Enumeration	`.1.3.6.1.4.1.164.8.15.2.1.1`
pktSwchPppChanInternalClock The internal clock rate of the MLPPP Link. Default value: 9. For Async channels: return 255.	column	Enumeration	`.1.3.6.1.4.1.164.8.15.2.1.10`
pktSwchPppChanBundle Bundle Number. It is possible to attach a few channels/links to a bundle. If the User enters a non existing bundle number, the PS will create a new bundle with this number. The bu…	column	Integer32	`.1.3.6.1.4.1.164.8.15.2.1.11`
pktSwchpPppChanIsdnRoutId ISDN destination. ID (1..200) in the ISDN routing table containing the outgoing ISDN address for this channel/link. For no destination: 0 Default value: 0	column	Integer32	`.1.3.6.1.4.1.164.8.15.2.1.12`
pktSwchpPppChanLastEvent Status showing the last PPP event which occured on the line described in an ascii string. Examples: 1. Received Configuration Request. 2. Sent Protocol Reject. 3. Error: Can Not C…	column	OctetString	`.1.3.6.1.4.1.164.8.15.2.1.13`
pktSwchpPppChanModemInitString This string is needed by the modem in order to be initiated, before dialing.	column	OctetString	`.1.3.6.1.4.1.164.8.15.2.1.14`
pktSwchpPppChanModemDialString This string enables the modem to open a new call.	column	OctetString	`.1.3.6.1.4.1.164.8.15.2.1.15`
pktSwchPppChanStopBits This entry indicates the number of stop bits per character. The options are either (1) one stop bit, (2) two stop bits, or (3) 1.5 stop bits. For Sync Links: notApplicable(255).	column	Enumeration	`.1.3.6.1.4.1.164.8.15.2.1.3`
pktSwchPppChanBitPerChar The number of data bits per character supported by the ppp link. Legal values for Async channels: 5..8 . For Sync Links: 0	column	Integer32	`.1.3.6.1.4.1.164.8.15.2.1.4`
pktSwchPppChanParity This entry selects the type of parity to be checked or generated. The options are (1) space parity, (2) mark parity, (3) even parity, (4) odd parity, or (255) no parity. For Sync …	column	Enumeration	`.1.3.6.1.4.1.164.8.15.2.1.5`
pktSwchPppChanNegotiationTrigger The trigger which is used in order to start the Negotiation. The HW signals which are used are: DCD (Data Carrier Detect) - issued by DCE DSR (Data Set Ready) - issued by D…	column	Enumeration	`.1.3.6.1.4.1.164.8.15.2.1.6`
pktSwchPppChanMRU Maximum Receive Unit. Size of the packet which is negotiated with the connected device. Default value: 1500 .	column	Integer32	`.1.3.6.1.4.1.164.8.15.2.1.7`
pktSwchPppChanACCM Async Control Character Map - The ACCM value serves as a mask for the first 32 characters in the ASCII table. Control characters may cause problems when they are tr…	column	OctetString	`.1.3.6.1.4.1.164.8.15.2.1.8`
pktSwchPppChanAuthentication Port Authentication Type. 1 - No Authentication: User side Only. 2 - Configuration of the Host side. PAP (Password Authentication Protocol) or CHAP (Challenge Handshake Au…	column	Enumeration	`.1.3.6.1.4.1.164.8.15.2.1.9`

Indexes