sysGenResetBypassEnable
RAD-MIB ·
.1.3.6.1.4.1.164.3.6.1.1.1.1.10
Object
column
r/w
Enumeration
Enable/Disable Reset Bypass operation when a KDI card exists and one of its links failed. notApplicable - when no KDI card exists in the Hub.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.6.1.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sysGenKmuxEntry
- Table
- sysGenKmuxTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysGenConfigIdx This object indicates the Configuration number (1..255)
referred.
Value of 255 specifies the TmpCnfg (Scratch).
The write operation in this Table is valid only to the
TmpCnfg e… | column | Integer32 | .1.3.6.1.4.1.164.3.6.1.1.1.1.1 |
| sysGenRebuildFrame How to rebuild frame (when a CH is connected/disconnected):
automatically - immediately, by automatic frame allocation (by Kmux)
manually - manually configured frame allocation (b… | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.11 |
| sysGenFlipIntegration The parameter is relevant only for KM-2100 and only when
sysGenMlMode=redundancy, switchBackup, or priorityBumping. | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.2 |
| sysGenMlMode The Main Link operation mode. Determines how many links are
used (one/two) and how they are used. | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.3 |
| sysGenFaType Frame Allocation type:
auto - automatic frame allocation (by Kmux)
manual - manually configured frame allocation (by user). | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.4 |
| sysGenLinkRecovery The parameter determines the Link Recovery mode.
The parameter is relevant only when the sysGenMlMode is either
switchBackup or priorityBumping. | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.5 |
| sysGenLinkSourceClock The source clock for the links. The parameter is relevant
only for KM-2100 having a KDI or KDI/CH cards. ML-A or ML-B
are selectable only when sysGenMlMode=dual or priorityBumpi… | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.6 |
| sysGenMngBwA The required management rate for ML-A, in bps. It is very important when a remote
unit is managed.
The selected value must be < ML-A Rate value.
0 = None or not applicable
800 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.6.1.1.1.1.7 |
| sysGenMngBwB The required management rate for ML-B, in bps. It is very important when a remote
unit is managed.
The selected value must be < ML-B Rate value.
0 = None or not applicable
800 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.6.1.1.1.1.8 |
| sysGenAutoDialSlot This object indicates the IO-SLOTs that can be used to initiate Automatic
DialUp.
This field will be applicable when KML.10 is a ML and its
prtIsdnSwitchMode=auto.
Each IO Slot i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.6.1.1.1.1.9 |