ip2IfStatRxSignaling
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.7.7.1.7
Object
column
SNMPv2-SMICounter32
Number of signaling frames that were received.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.7.7.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ip2IfStatEntry
- Table
- ip2IfStatTable
- Siblings
- 35
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ip2IfStatChIndex The channel index, which is actualy the bundle ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.1 |
| ip2IfStatTxSignaling Number of signaling frames that were transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.10 |
| ip2IfStatTxVoice Number of voice frames that were transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.11 |
| ip2IfStatTxHdlc Number of HDLC frames that were transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.12 |
| ip2IfStatRdnFlip Number of redundancy flips occured.
This parameter counts only flips from this bundle to the other bundle
in the redundancy couple. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.13 |
| ip2IfFarEndTdmStatus This variable indicates the Status of the Far-End TDM Line.
It contains failure state information.
The variable is a bit map represented as a sum, therefore, it
can represent … | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.14 |
| ip2IfStatPsnTxFrames Number of frames that were transmitted to PSN. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.15 |
| ip2IfStatPsnRxFrames Number of frames that were recieved from PSN. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.16 |
| ip2IfStatMinJittBufLevel The Minimum jitter buffer level (in msec). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.17 |
| ip2IfStatMaxJittBufLevel The Maximum jitter buffer level (in msec). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.18 |
| ip2IfStatRecommendedJittBufSize The Recommended jitter buffer Size (in msec).
0= not applicable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.19 |
| ip2IfStatSeqErrors Number of events that the sequence number of an incoming Frame
causes a transition from the 'sync' state to
the 'out of sequence' state. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.2 |
| ip2IfStatPsnSeqErrors Number of times that the sequence number of an incoming Frame
indicates Loss of Frame or Out of order occured in PSN. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.20 |
| ip2IfStatPsnReorderFrames Number of times that Frames had been reordered in PSN. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.21 |
| ip2IfStatMinRoundTripDelay The minimum Round Trip delay (in msec).
0= not applicable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.22 |
| ip2IfStatMaxRoundTripDelay The maximum Round Trip delay (in msec).
0= not applicable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.23 |
| ip2IfStatAvrRoundTripDelay The avarage Round Trip delay (in msec).
0= not applicable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.24 |
| ip2IfStatFrameTrackDupDrop The number of packets dropped due to being duplicated.
(duplicated packet means a packet that has the same sequential
number as a packet being received previously). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.25 |
| ip2IfStatFrameTrackMissing The number of packets that are missing.
(Missing packet means an expected packet- according to the current sequential
number - that was not received). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.26 |
| ip2IfStatFrameTrackLongSerMiss The longest series of consecutive missing sequential numbers.
Missing sequential numbers represent missing packets that was
expected to be received successively. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.27 |
| ip2IfStatTxMeasuredSilence This object shows the percentage of Silence that was measured by the device
for the current bundle in the transmitted payload.
Relevant values: 0..100, 255.
Default value is 50.
0… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.28 |
| ip2IfStatRxMeasuredSilence This object shows the percentage of Silence that was measured by the device
for the current bundle in the received payload.
Relevant values: 0..100, 255.
Default value is 50.
0 me… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.29 |
| ip2IfStatBufUnderflows Number of events that the buffer underflows. This records the count of the
number of events the Receive (Eth to TDM) buffer underflows. In the
case of a continuous underflow cause… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.3 |
| ip2IfStatHdlcCrcErr This counter indicates the number of received HDLC frames
with CRC errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.30 |
| ip2IfStatHdlcAlignErr This counter indicates the number of received HDLC frames
with alignment errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.31 |
| ip2IfStatHdlcOversize This counter indicates the number of received HDLC frames
longer than 1470. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.32 |
| ip2IfStatHdlcUndersize This counter indicates the number of received HDLC frames
shorter than 4. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.33 |
| ip2IfStatHdlcAbort This counter indicates the number of received HDLC frames
with abort indication. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.34 |
| ip2IfStatRxCorrectFrames Number of received correct frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.35 |
| ip2IfStatHdlcErroredFrames Number of received errored HDLC frames. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.36 |
| ip2IfStatBufOverflows Number of events that the buffer overflows. This records the count of the
number of events the Receive (Eth to TDM) buffer overflows. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.4 |
| ip2IfStatTxOnTimeInterval Number of frames that were transmitted due to time interval elapse.
The user can choose to Tx the Frame when it reaches the Max size
or when the packetizing time interval elapses.… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.5 |
| ip2IfStatTxOnMaxSize Number of frames that were transmitted due to reaching max.
frame size. The user can choose to Tx the Frame when it reaches the
Max size or when the packetizing time interval elap… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.6 |
| ip2IfStatRxVoice Number of voice frames that were received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.8 |
| ip2IfStatRxHdlc Number of HDLC frames that were received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.7.7.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| ip2IfChannelIndex The channel index, which is actualy the bundle ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.7.1.1.1 |
| ip2IfIntervalStatIndex The Interval index, which is actualy the Interval number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.7.11.1.1 |