pktSwchAsyncRunProEditServSig
RAD-MIB ·
.1.3.6.1.4.1.164.8.2.6.1.21
Object
column
Integer32
This entry specifies the editing PAD service signals. The integer values have the following meanings: (0) No editing PAD service signals (1) Editing PAD service signals for printing terminals (2) Editing PAD service signals for display terminals (3) to (126) Editing PAD service signals using the desired character from IA5.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.2.6.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pktSwchAsyncRunProEntry
- Table
- pktSwchAsyncRunProTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchAsyncRunProIfIndex An index for the table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.6.1.1 |
| pktSwchAsyncRunProDiscOut This parameter instructs the PAD whether to forward the user sequences included in
data packets to the local DTE or discard them. The options are (1) discard output or
(2) norma… | column | Enumeration | .1.3.6.1.4.1.164.8.2.6.1.10 |
| pktSwchAsyncRunProCRPPadding This parameter specifies the number of padding characters to be added after a carriage
return character is transmitted to the local DTE. | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.11 |
| pktSwchAsyncRunProLineFold This parameter specifies the maximum number of characters to be inserted before the
format effector. If the value is zero, there is no insertion of a format effector (line foldin… | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.12 |
| pktSwchAsyncRunProSpeed This parameter determines the rate of data transmission to and from the DTE. | column | Enumeration | .1.3.6.1.4.1.164.8.2.6.1.13 |
| pktSwchAsyncRunProPadFlowCont This determines whether or not the terminal can exercise flow control over the PAD.
The options are either 'device can exercise flow control' or 'device cannot exercise flow
contr… | column | Enumeration | .1.3.6.1.4.1.164.8.2.6.1.14 |
| pktSwchAsyncRunProLineFeedInsert This parameter indicates when there is a line feed insertion after CR. The options are
(1) Insert line feed after transmission of CR to the DTE, (2) Insert line feed after receip… | column | Enumeration | .1.3.6.1.4.1.164.8.2.6.1.15 |
| pktSwchAsyncRunProLineFeedPad This parameter specifies the number of padding characters to be added after a line
feed. | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.16 |
| pktSwchAsyncRunProEditing This parameter specifies the editing capabilities available in the data transfer mode.
Editing is always possible when the PAD is in the command mode. The options are
(1) Comman… | column | Enumeration | .1.3.6.1.4.1.164.8.2.6.1.17 |
| pktSwchAsyncRunProCharDel This parameter specifies the character delete, which is one character from IA5. The default
selection is 127 (character DEL). | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.18 |
| pktSwchAsyncRunProLineDel This parameter specifies the line delete, which is one character from IA5. The default
selection is 24 (character CAN). | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.19 |
| pktSwchAsyncRunProChannelNumber The channel to which this entry applies. This value is the same as the pktSwchChannelNumber. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.2.6.1.2 |
| pktSwchAsyncRunProLineDisp This entry specifies the line display character, which is one character
from IA5. The default selection is 18 (character DC2). | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.20 |
| pktSwchAsyncRunProEchomask The value is a sum of values (powers of two), where each value in the sum represents
a character (or characters) that is (are) included in the echo mask. The characters in the
ec… | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.22 |
| pktSwchAsyncRunProParTreat This entry controls the generation of parity bits in the data sent to the local DTE and the
checking of the parity bit when generated by the local DTE. The options are (1) parity… | column | Enumeration | .1.3.6.1.4.1.164.8.2.6.1.23 |
| pktSwchAsyncRunProPageWait This entry specifies the number of line feed characters counted by the PAD before the
page wait condition is entered. If the value is zero, page wait is disabled. | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.24 |
| pktSwchAsyncRunProRecallChar The character specified by this entry is used to escape from the data transfer
mode and enter the PAD command mode. The integer values have the following meanings:
(0) … | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.3 |
| pktSwchAsyncRunProEcho This determines if an echo of the input characters is retured to the DTE.
The options are either 'echo enabled' or 'no echo'. | column | Enumeration | .1.3.6.1.4.1.164.8.2.6.1.4 |
| pktSwchAsyncRunProDataForwChar The value is a sum of values (powers of two), where each value in the sum represents
a character (or characters) that is (are) used as a data forwarding character. The data
forwa… | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.5 |
| pktSwchAsyncRunProIdleTimer Packets will be forwarded when the idle timer expires. The idle time interval is specified
as a multiple of 50 milliseconds. The multiple is given by the parameter value. For e… | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.6 |
| pktSwchAsyncRunProDevFlowCont This parameter determines whether or not the PAD uses software flow control for the
attached device. The options are either (1) PAD uses flow control during data transfer
mode, … | column | Enumeration | .1.3.6.1.4.1.164.8.2.6.1.7 |
| pktSwchAsyncRunProServSig This parameter is used to instruct the PAD whether to transfer PAD service signals and
the PAD prompt to the local DTE in standard format. The options are (1) PAD service
signals… | column | Enumeration | .1.3.6.1.4.1.164.8.2.6.1.8 |
| pktSwchAsyncRunProBreak The value is a sum of values (powers of two), where each value in the sum represents
a PAD operation on receipt of the break signal from the DTE.
The values that may be included i… | column | Integer32 | .1.3.6.1.4.1.164.8.2.6.1.9 |