pwGenOamType

RAD-MIB · .1.3.6.1.4.1.164.14.1.1.1.1.6
MIB view Table view

Object

column r/w Enumeration 
This objects defines the failure detection mechanism used 
on this PW.
BFD - Bidirectional Forwarding Detection
notApplicable(1) value will be used when
pwGenOamMode is notApplicable.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.14.1.1.1.1.6
Type
column
Access
readwrite
Status
current
Parent
pwGenEntry
Table
pwGenTable
Siblings
18

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pwIdx
Index of this table. The value for this object is equal to the value of pwIndex from the pwTable of PW-STD-MIB
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.14.1.1.1.1.1
pwGenIpNextHop
This object defines local Next Hop IP Address for this PW. 0.0.0.0 - means - not applicable. This object is applicable only when pwGenNextHopType=ipV4
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.164.14.1.1.1.1.10
pwGenMacNextHop
This object defines local Next Hop MAC Address for this PW. 0:0:0:0:0:0 - means - not applicable. This object is applicable only when pwGenNextHopType=bridgePort
columnMacAddress.1.3.6.1.4.1.164.14.1.1.1.1.11
pwGenEnableVlanTag
This object enables or diables a VLAN tag on every transmitted paket via this PW connection
columnEnumeration.1.3.6.1.4.1.164.14.1.1.1.1.12
pwGenVlanId
This object indicates the VLAN ID tag attached to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enabled (3).
columnUnsigned32.1.3.6.1.4.1.164.14.1.1.1.1.13
pwGenVlanPriority
This object indicates the VLAN priority assigned to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enabled (3)
columnUnsigned32.1.3.6.1.4.1.164.14.1.1.1.1.14
pwGenIpTos
This object indicates TOS field value for pw having pwPsnType= ip (3)
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.14.1.1.1.1.15
pwGenSourceUdpPort
This object indicates source UDP port (1...65535) value for pw having pwPsnType= ip (3)
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.14.1.1.1.1.16
pwGenSubType
This object indicates the PW Sub Type (i.e. Sub Type of 'pwType' from 'pwTable'). For ACE-3000 devices: It is applicable only when pwType = basicCesPsn(21).
columnEnumeration.1.3.6.1.4.1.164.14.1.1.1.1.17
pwGenSourceIpAddress
Source IP Address per PW
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.164.14.1.1.1.1.18
pwGenSourceIpMask
Source IP Mask per PW
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.164.14.1.1.1.1.19
pwGenPeerIdx
This object indicates the Index of the Peer (as it is defined in the Peer Table), which terminated this PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.14.1.1.1.1.2
pwGenAttachmentCircuit
This is a unique index within the ifTable. It represents the attached circuit interface (e.g ATM VC, HDLC) attached to this PW connection (from service initiator side). …
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.164.14.1.1.1.1.3
pwGenOutgoingInterface
This is a unique index within the ifTable. It represents the outgoing interface (towards the PSN ) attached to this PW connection. This object is applicable onl…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.164.14.1.1.1.1.4
pwGenOamMode
This objects defines whether OAM will be enabled on this PW. notApplicable(1) value will be used when PW type does not support OAM.
columnEnumeration.1.3.6.1.4.1.164.14.1.1.1.1.5
pwGenSequenceNumberField
This object defines whether processing of Sequence Number field (ATM cell encapsulation) will be done by device, on this PW.
columnEnumeration.1.3.6.1.4.1.164.14.1.1.1.1.7
pwGenNextHopType
Indicates address type of the Next Hop. Not applicable for device with router.
columnEnumeration.1.3.6.1.4.1.164.14.1.1.1.1.8
pwGenNextHop
Not applicable (=0) when pwMplsEgressTunnelNextHopType=notApplicable. When applicable, represents ATM VC, Bridge Port, according to pwMplsEgressTunnelNextHopType.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.14.1.1.1.1.9