mdlRRMngAutoDis
RAD-MIB ·
.1.3.6.1.4.1.164.1.2.3.1.1.7
Object
column
obsolete
Enumeration
Attribute describing the setup of the MNG switch on the TL- Active cards. Value ON indicates the ability of activating the auto-disable mechanism of the card via management command. Value OFF indicates that the activation of the auto-disable mechanism of the card is according to the switch setting.In this case the mdlRRAutodisable will not be available for write operation. Applicable to Token Ring cards only. Replaced by mdlRRMngState.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.1.2.3.1.1.7- Type
- column
- Access
- readonly
- Status
- obsolete
- Parent
- mdlRREntry
- Table
- mdlRRTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | off |
3 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdlRRid Unique number to identify the module. It indicates the slot
number the module is inserted in. | column | Integer32 | .1.3.6.1.4.1.164.1.2.3.1.1.1 |
| mdlRRMngState This entry indicates the setting of the module's switches. ENABLE means that the module
can accept management commands. | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.10 |
| mdlRRType Indicates the type of the module installed in the specified slot number. | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.11 |
| mdlRRHwVer ASCII string for description and display of the module's hardware version,
as it is known by the module's software. A manager can record his own
hardware upgrade. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.1.2.3.1.1.12 |
| mdlRRSwVer ASCII string for description and display of the module's
software version. A value of NOT APPLICABLE will be recorded
for a module having no independent processor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.1.2.3.1.1.13 |
| mdlRRSpecific Object identifier of entity containing additional information
regarding this instance. This entry is module type specific. | column | ObjectIdentifier | .1.3.6.1.4.1.164.1.2.3.1.1.14 |
| mdlRRTLRstatus This entry specifies the status of the setup on the TL-2/Exx
modules. When the value is ON, lobe one is the only active lobe. This entry
will have the value UNKNOWN for all other… | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.2 |
| mdlRRtermination Attribute describing the termination state as set by the switches on the
lobe modules | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.3 |
| mdlRRReset When this object is set to the value of ON(3),
the module performs software reset. Upon completion, a trap will
be issued to the management station and the value
will be set to … | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.4 |
| mdlRRLed This entry specifies the LEDs status in the module . Each led will be represented by 4 bits
where the first 2 bits will specify the status (NA, OFF, ON, BLINK), and the next two… | column | OctetString | .1.3.6.1.4.1.164.1.2.3.1.1.5 |
| mdlRRSpeed Attribute describing the bandwidth of the media as set by the module switches. | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.6 |
| mdlRRAutodisable This attribute can be set by the manager if the value of mdlRRMngAutoDis is ON. It
controls the behavior of the Active cards regarding the Auto-disable mechanism. All
ports wil… | column | Enumeration | .1.3.6.1.4.1.164.1.2.3.1.1.8 |
| mdlRRConfigMsg Full configuration message coded in internal RAD application format.
This entry describes module' configuration. | column | OctetString | .1.3.6.1.4.1.164.1.2.3.1.1.9 |