prtPhMlClockMode
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.7
Object
column
r/w
Enumeration
Clock mode.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.2.5.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtPhMlCnfgEntry
- Table
- prtPhMlCnfgTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | idles |
3 | flags |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtPhMlCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.1 |
| prtPhMlSyncRestore Sync Restoration time, in seconds.
notApplicable=0. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.10 |
| prtPhMlBus The TDM BUS this port is linked to. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.11 |
| prtPhMlMfSyncSlot This attribute indicates whether the sync is synchronized
according to a certain card and the slot of this card.
This operation is required in order to bypass signaling of
PCM voi… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.12 |
| prtPhMlClockSource The Clock Source: TC (Tx Clock) or RC (Rx Clock) signals. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.13 |
| prtPhMlErrCorrection This object indicates if Error Correction mechanism should be applied or not.
It will be applicable only if the interface HW includes the Error Correction
chip. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.14 |
| prtPhMlCorrectionMode This object is applicable only when prtPhMlErrCorrection=yes.
random - enables to correct up to 3 random errors in an 23 bit frame
built from 12 data bits and 11 appended… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.15 |
| prtPhMlControlSignals This object shows whether the Port will ignore or implement the control signals
like DCD, CTS, DTR. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.16 |
| prtPhMlInterfaceType The SW Configurable Interface Type. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.17 |
| prtPhMlClockPolarity This object indicates the clock polarity. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.18 |
| prtPhMlSltIdx This attribute indicates a unique slot position where
the module is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
For the Vmux2100 Main … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.2 |
| prtPhMlPrtIdx This attribute indicates a unique port number.
ML-20 cards have just one external interface. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.3 |
| prtPhMlConnect This attribute indicates whether the port should be considered
in any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.4 |
| prtPhMlRate This attribute indicates the configured port speed.
auto - rate is adapted automatically to the attached modem rate. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.5 |
| prtPhMlCAS This attribute indicates whether Channel Associated
Signaling (CAS) is used. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.6 |
| prtPhMlSatBuffer Satellite Buffer (+/- 256). | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.8 |
| prtPhMlDialProcess Dial Process. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.2.5.1.9 |