prtExPVc4TransportProtocol

RAD-MIB · .1.3.6.1.4.1.164.3.2.3.2.9.1.1.42

Object

column r/w Enumeration

Transport Protocol.
ptp = point to point.
aal2oMpls = AAL2 over MPLS.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.2.3.2.9.1.1.42
Type: column
Access: readwrite
Status: current
Parent: prtExPVc4CnfgEntry
Table: prtExPVc4CnfgTable
Siblings: 51

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	notApplicable
`2`	asmi31
`3`	asmi31s2

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtExPVc4CnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.1`
prtExPVc4Tc Time interval for CIR control, in seconds. The value will be the same for all cards' ports.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.10`
prtExPVc4Oos Handling type, when connection is lost.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.11`
prtExPVc4EchoCanceler Echo canceler activation.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.12`
prtExPVc4VarDelay Maximum variant delay of the FR network, in msec.	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.13`
prtExPVc4CongLevel This object indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The resolution of the paramet…	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.14`
prtExPVc4Wire This object indicates the wiring of the E&M port. It is applicable only for E&M card type.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.15`
prtExPVc4ExtensionType This object indicates the type of extension relevant for this port. ipForceConnect (6) is used for automatic connection or automatic dialing when the phone is off h…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.16`
prtExPVc4ExtensionNumber This is the extension number of this port. This field is relevant only when the extension type is voice switching and is read only if the port is member of a hunt group.	column	OctetString	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.17`
prtExPVc4OutPulsing This field indicates whether to outpulse the received digits. It is notApplicable(1) when the extension type is forceConnect(2).	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.18`
prtExPVc4HuntGroupMb This object indicates if this port belongs to an hunt group.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.19`
prtExPVc4SltIdx This attribute indicates a unique slot position where the card is inserted.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.2`
prtExPVc4HuntGroupIdx If it belongs to an hunt group, this fields indicates the index of the relevant hunt group. 0 = notApplicable	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.20`
prtExPVc4AutoFaxMode This object indicates if the system will switch automatically to FAX mode when detecting FAX activity. Default=Yes.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.21`
prtExPVc4FaxRate FAX initial rate. Default=9600 bps.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.22`
prtExPVc4SeizeAck This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook signal it will transmit…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.23`
prtExPVc4SignalingProtocol The signaling protocol that will be used between the PABX & the voice port. Delay Start Protocol: the line is seized by sending an Off hook signal and after a delay…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.24`
prtExPVc4DelayStart This parameter is used only for Delay Protocol. This is the time that the calling party will wait after sending an Off hook signal and before sending DTMF digits to the called par…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.25`
prtExPVc4WinkMinDuration This parameter is used only for Wink Protocol. Min Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in intervals of 10 msec.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.26`
prtExPVc4WinkMaxDuration This parameter is used only for Wink Protocol. Max Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in intervals of 10 msec.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.27`
prtExPVc4GenerateTone This parameter indicates whether the device (MX or MPH) should generate dial tones for the channel. If the value is yes (3), it generates dial tones. If the value is no (2), the …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.28`
prtExPVc4CodingLaw This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for T1 links. …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.29`
prtExPVc4PrtIdx This object indicates the port number in the selected card (slot).	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.3`
prtExPVc4GenerateRingBack Determines whether the Ring Back tone is generated locally or from the remote end. The default is - NO (Meaning coming from the remote end). Yes means that the Ring Back T…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.30`
prtExPVc4ChannelId Channel Identifier. According to FRF11 each voice port that works as force connect should add a CH Id after the DLCI in the frame header. Default : 1 …	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.31`
prtExPVc4PortConnection Port connection determines whether the port is connected to a PABX (Trunk) or to Telephone set (Line) . It determines whether to send certain messages to the port o…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.32`
prtExPVc4CoderAndRate Coder and Rate for the Voice Compression. In MPH: Relevant for MVC-8 card only.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.33`
prtExPVc4DestinationNum The destination phone number: 0 to 22 digits. Applicable for Auto Dial - ipForceConnect(6), Permanent Dial and Auto Accept Extension Types. Default: Null Str…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.34`
prtExPVc4DtmfRelay When DTMF RELAY is disabled, the DTMF digits (dialed by the user) are transmitted as compressed voice and in the remote unit are decompressed. When DTMF RELAY is en…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.35`
prtExPVc4DiscOnSilence No. of silenced seconds after which the call will be disconected. A value of 0 means that there will be no disconnect when there is silence. Possible values: 0 - 900 sec.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.36`
prtExPVc4DynamicJitter The MVC8 uses two mechanisms to overcome the network delay. The first one is a static jitter buffer which holds a constant buffer of up to 300 Msec and can be controled by the JIT…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.37`
prtExPVc4EandMType This is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.38`
prtExPVc4Rate This is the Rate of the port in TS units. It is used by VF-30 card family. 0 = NA = port is not intended to be connected; therefore, no Rate.	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.39`
prtExPVc4PrtType This object indicates the type of the selected port. In Mx 30/300 phase 4: s0 & u are for Voice over ISDN. In MX 30/300 phase 5: sQsig & uQsig are used for Voice over ISDN with Qs…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.4`
prtExPVc4FrameSize Defines the maximum size in Bytes of the multiplexed frame. In some cases this must be limited to avoid IP fragmentation, which makes the multiplexing useless, and can also decrea…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.40`
prtExPVc4MultiplexInterval Defines the maximum amout of time (msec.) between multiplexed frames that are sent. For Vmux-400/420 devices: It defines the Payload Packetizing Interval. …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.41`
prtExPVc4MultiFreqRelay This object enables/disables Multi Frequency Signaling Detection.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.43`
prtExPVc4MinPulseWidth Defines the minimum Pulse Width in msec. Valid values: 45-100 msec. notApplicable=0.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.44`
prtExPVc4MinPowerLevel Defines the minimum Power Level in dBm. Valid values: -1..-35 dBm.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.45`
prtExPVc4SuperTandem The Super Tandem feature provides end to end compression over multiple hops, solving the double compression problem detected in Voice compressing systems. The Super Tandem, when…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.46`
prtExPVc4DestIp This object defines the destination IP Address.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.47`
prtExPVc4DestBundle This object defines the destination Bundle at the far-end device.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.48`
prtExPVc4SrcIpAddress This object defines the Source IP Address.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.49`
prtExPVc4Connect This attribute indicates whether the port should be considered in any of the mux algorithms.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.5`
prtExPVc4SrcIpMask This object defines the Source IP Mask.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.50`
prtExPVc4DefaultGateway This object defines the Default Gateway for this interface.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.51`
prtExPVc4SigPacketInterval Defines the Signaling Packetizing Interval, which is the maximum time interval, measured in msec (milliseconds), between multiplexed signaling frames.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.52`
prtExPVc4IfType This attribute indicates the interface type of the port. eAndM4wires and eAndM2wires - are valid only for E&M port type eAndM4wires - means 2/4 …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.6`
prtExPVc4TxGain Transmission gain in dB.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.7`
prtExPVc4RxGain Reception gain in dBm.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.8`
prtExPVc4MaxRate Voice rate.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.9.1.1.9`