mdlCInterfaces
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.3.2.1.1.9
Object
column
OctetString
Octet string which indicates 'present' interfaces in card.
Each '0' bit stands for non-present interface.
Each '1' bit stands for present interface.
For ASMi54C card of LRS-102 and MP-4100 notPresent interfaces may be:
- SHDSL Line ID with no wire pairs assigned to it (does not exist in ifTable)
- PCS without SHDSL Line binded to it, (exist in ifTable, with
ifOperStatus= notPresent)
- External DS1 when its LIU is used by an Internal DS1 of the same card
- Internal DS1 when single bearer is not TDM.
In each octet, MS bit represents port 1
and LS bit represents port 8
MSB LSB
1 0 0 0 1 0 0 0 -- Example: Port # 1 and 5 are present.
Port 1 2 3 4 5 6 7 8
1st Octet (MSB octet) represents SDHSL Lines
2nd Octet represents PCS
3rd Octet represents External DS1
4th Octet represents Internal DS1
5th and 6th Octets are reserved for future Internal DS1.
For OP-108/106 cards of LRS-102 and MP-4100 notPresent interfaces may be:
- External DS1 when its 'associated' Int-DS1 port is connected to another card
- Internal DS1 when its 'associated' Ext-DS1 port is connected to another card
(Both may be 'present' when inter-connected).
1st Octet represents External DS1
2nd Octet represents Internal DS1
Bit representation, same as for ASMi-54C card.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.3.2.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mdlCPrgEntry
- Table
- mdlCPrgTable
- Siblings
- 8
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdlCCnfgIdx This attribute indicates the Idx of the Cnfg(1..100) being
referred.
Value 255 specifies the TmpCnfg | column | Integer32 | .1.3.6.1.4.1.164.3.1.3.2.1.1.1 |
| mdlCSltIdx This attribute indicates a unique number of the slot
position where the card is inserted.
In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16)
are not valid. | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.2.1.1.2 |
| mdlCPrgCardType This attribute indicates the type of card assigned to the
specific slot in the common configuration.
This object is identical in all the configurations (1..100).
Only the TmpCnf(2… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.2.1.1.3 |
| mdlCNoOfExternPrt Number of external ports in the programmed card of the
specific slot position | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.3.2.1.1.4 |
| mdlCNoOfInternPrt Number of internal ports in the programmed card of the
specific slot position. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.3.2.1.1.5 |
| mdlCWorkMode Working mode of the card.
The user may configure the card to work in a stand alone mode or integrated
with the device.
Example for use in MHS-IP cards:
… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.2.1.1.6 |
| mdlCDhcpClientEnable Enable/Disable the feature of DHCP Client for the selected card. | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.2.1.1.7 |
| mdlCRdnExists This object indicates whether any port of the programmed card is
configured to be part of a Redundancy/APS pair.
If at least one port of the programmed card is configured to be
pa… | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.2.1.1.8 |