pktSwchSnaPULlc2FrEncapsTypeS
RAD-MIB ·
.1.3.6.1.4.1.164.8.11.11.1.3
Object
column
r/w
Enumeration
Indicates if the LLC2/RFC1490 Protocol Interface uses the BNN, BAN or TREN method of Frame Encapsulation.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.11.11.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pktSwchSnaPULlc2FrEntryS
- Table
- pktSwchSnaPULlc2FrTableS
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchSnaPULlc2FrNumberS Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.11.1.1 |
| pktSwchSnaPULlc2FrTxWindowS The LLC2 Link Window Size. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.11.1.10 |
| pktSwchSnaPULlc2FrLinkS The SPS Frame Relay Link Number which this LLC2 Protocol Interface is associated with. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.11.1.11 |
| pktSwchSnaPULlc2FrDLCIS The SPS Frame Relay DLCI Number which this LLC2 Protocol Interface is associated with. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.11.11.1.12 |
| pktSwchSnaPULlc2FrXIDInitiationS This parameter is not applicable for PU with Local XID handling.
Legal values:
1 - Do not initiate an XID message.
2 - Initiate an XID message to LLC2. | column | Enumeration | .1.3.6.1.4.1.164.8.11.11.1.13 |
| pktSwchSnaPULlc2FrN2CountS N2 Count | column | Integer32 | .1.3.6.1.4.1.164.8.11.11.1.14 |
| pktSwchSnaPULlc2FrT1TimerS T1 Timer in 1/10 of a second. | column | Integer32 | .1.3.6.1.4.1.164.8.11.11.1.15 |
| pktSwchSnaPULlc2FrTiTimerS TI Timer in seconds | column | Integer32 | .1.3.6.1.4.1.164.8.11.11.1.16 |
| pktSwchSnaPULlc2FrEntryStatusS The status of this PU Llc2 table entry.
In order to save this entry, set status to valid.
An underCreation value is set by the Agent when this entry is updated. | column | Enumeration | .1.3.6.1.4.1.164.8.11.11.1.17 |
| pktSwchSnaPULlc2FrSideS Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not. | column | Enumeration | .1.3.6.1.4.1.164.8.11.11.1.2 |
| pktSwchSnaPULlc2FrDestMACS The LLC2 Destination MAC Address. | column | OctetString | .1.3.6.1.4.1.164.8.11.11.1.4 |
| pktSwchSnaPULlc2FrSrcSAPS The LLC2 Source SAP Address. 2 Hex digits | column | OctetString | .1.3.6.1.4.1.164.8.11.11.1.5 |
| pktSwchSnaPULlc2FrDestSAPS The LLC2 Destination SAP. | column | OctetString | .1.3.6.1.4.1.164.8.11.11.1.6 |
| pktSwchSnaPULlc2FrXIDIdBlkS Part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The IDBLK is required for PU with Local XID handling
or PU with End-to-End XID handling, NO Support … | column | OctetString | .1.3.6.1.4.1.164.8.11.11.1.7 |
| pktSwchSnaPULlc2FrXIDIdNumS Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The IDNUM is required for PU with Local XID handling
or PU with End-to-End XID handling, NO S… | column | OctetString | .1.3.6.1.4.1.164.8.11.11.1.8 |
| pktSwchSnaPULlc2FrMaxPiuSizeS Maximum Path Information Size | column | Integer32 | .1.3.6.1.4.1.164.8.11.11.1.9 |