prtMl4SignalingMode
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.12
Object
column
r/w
Enumeration
Refers to the signaling mode of the port (or framer module).
notApplicable(1)- means that no framer is needed for this port (no signaling),
or that this object is not relevant.
cas(2) means Channel Associated Signaling. Used for E1 Links.
ccs(3) is the Common Channel Signaling (the signaling is not within
the channels time slot - a TS for signaling is used).
robbedBit(4) is a method implementing 7 bits for the voice and 1 bit
dedicated for signaling. Used for T1 Links.
other (5)- Signaling generally exists though not specifically according
to one of the values listed ; this port uses a framer in this case.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.19.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtMl4CnfgEntry
- Table
- prtMl4CnfgTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | auto |
2 | dclA |
3 | dclB |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtMl4CnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. The write operation is valid only
to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.1 |
| prtMl4IpAddress IP Address of the port. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.10 |
| prtMl4IpMask IP subnet mask of the port. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.11 |
| prtMl4EchoCanceler Echo canceler activation. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.13 |
| prtMl4OosErrorSource OOS (Out-of-Service) Error Source.
This object is applicable for T1 ports only. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.14 |
| prtMl4OosEntryThreshold This object defines the number of Errors per Second that determine the
minimum unacceptable noise level. This value will be the Entry Threshold
to the OOS (Out-of-Service) state.… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.15 |
| prtMl4OosExitThreshold This object defines the number of consecutive Error-Free-Seconds before
going from OOS state to Normal state. This value will be the Exit Threshold
from the OOS (Out-of-Service) s… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.16 |
| prtMl4LogicalLinkId This object defines for a V5.2 Master ML the Logical Link Id.
Valid values are: 0..256.
NA=257. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.17 |
| prtMl4DedicatedTs A unique number to identify Dedicated TS of the E1 port (V5.2).
It is applicable only when prtMl4Service=v52Slave and
prtExPh1MlInbandMng selected is dedicatedTs, dedicatedPpp or… | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.18 |
| prtMl4RemCrc This object indicates whether the E1 of the Remote device
connected to this E1 port, will have CRC-4 or not. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.19 |
| prtMl4SltIdx This attribute indicates a unique slot position where
the module is inserted. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.2 |
| prtMl4CrossConnectLevel This object indicates whether the cross connect is
on DS1 or DS0 (time-slots) level.
When cross connect level is ds1, Destination Slot
is indicated by prtGenCnfgLinkToSlot,
De… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.20 |
| prtMl4PppEchoFailDetection This object indicates whether the PPP Echo is taken into account
for its Fail Detection.
This object is relevant when Inband Mng between devices is Dedicated TS PPP.
Default=Dis… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.21 |
| prtMl4EcanCasControl This object enables/disables ECAN (Echo Canceller) control activation/deactivation
sent via the A, B, C, D multiframe signaling BITs. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.22 |
| prtMl4PrtIdx This attribute indicates a unique port number. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.3 |
| prtMl4SigProfile This object indicates the Signaling Profile of the port.
none - when the Frame is G732N (no MF) or Unframed.
p1 = profile 1
p2 = profile 2
p3 = profile 3
p4 = profile 4
p5 = … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.4 |
| prtMl4CGA This object selects the method used to signal the CGA state
to the other end, through the main link.
'none' - non-transparent mode. When one of the links
(main) will be… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.5 |
| prtMl4Oos 'idle' = '0' = on-hook, idle state
'busy' = '1' = off-hook, busy state
'forcedIdle' = SP = both A and B signaling bits are forced
to '0' during out-of-service perio… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.6 |
| prtMl4VoiceOos Voice Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0. | column | OctetString | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.7 |
| prtMl4DataOos Data Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0. | column | OctetString | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.8 |
| prtMl4Service Link Service.
leasedLine - usual TDM interface.
v51 - V5.1 interface.
v52Master - V5.2 Link to Local Exchange.
v52Slave - a ML that is transferred to the v52Master. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.19.1.1.9 |