pktSwchAsyncRunProBreak

RAD-MIB · .1.3.6.1.4.1.164.8.2.6.1.9

Object

column Integer32

The value is a sum of values (powers of two), where each value in the sum represents
a PAD operation on receipt of the break signal from the DTE.
The values that may be included in the sum and their meanings are:
0   Nothing
1   Send interrupt packet to network
2   Send RESET packet to network
4   Send and 'indication of break' message
8   Escape from data transfer mode
16 Discard output data waiting to be sent to the DTE .

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.8.2.6.1.9
Type: column
Access: readonly
Status: current
Parent: pktSwchAsyncRunProEntry
Table: pktSwchAsyncRunProTable
Siblings: 23

Syntax

Integer32

Values & Constraints

Enumerated Values

`1`	unknown
`2`	x25
`3`	fr
`4`	isdn

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pktSwchAsyncRunProIfIndex An index for the table.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.8.2.6.1.1`
pktSwchAsyncRunProDiscOut This parameter instructs the PAD whether to forward the user sequences included in data packets to the local DTE or discard them. The options are (1) discard output or (2) norma…	column	Enumeration	`.1.3.6.1.4.1.164.8.2.6.1.10`
pktSwchAsyncRunProCRPPadding This parameter specifies the number of padding characters to be added after a carriage return character is transmitted to the local DTE.	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.11`
pktSwchAsyncRunProLineFold This parameter specifies the maximum number of characters to be inserted before the format effector. If the value is zero, there is no insertion of a format effector (line foldin…	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.12`
pktSwchAsyncRunProSpeed This parameter determines the rate of data transmission to and from the DTE.	column	Enumeration	`.1.3.6.1.4.1.164.8.2.6.1.13`
pktSwchAsyncRunProPadFlowCont This determines whether or not the terminal can exercise flow control over the PAD. The options are either 'device can exercise flow control' or 'device cannot exercise flow contr…	column	Enumeration	`.1.3.6.1.4.1.164.8.2.6.1.14`
pktSwchAsyncRunProLineFeedInsert This parameter indicates when there is a line feed insertion after CR. The options are (1) Insert line feed after transmission of CR to the DTE, (2) Insert line feed after receip…	column	Enumeration	`.1.3.6.1.4.1.164.8.2.6.1.15`
pktSwchAsyncRunProLineFeedPad This parameter specifies the number of padding characters to be added after a line feed.	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.16`
pktSwchAsyncRunProEditing This parameter specifies the editing capabilities available in the data transfer mode. Editing is always possible when the PAD is in the command mode. The options are (1) Comman…	column	Enumeration	`.1.3.6.1.4.1.164.8.2.6.1.17`
pktSwchAsyncRunProCharDel This parameter specifies the character delete, which is one character from IA5. The default selection is 127 (character DEL).	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.18`
pktSwchAsyncRunProLineDel This parameter specifies the line delete, which is one character from IA5. The default selection is 24 (character CAN).	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.19`
pktSwchAsyncRunProChannelNumber The channel to which this entry applies. This value is the same as the pktSwchChannelNumber.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.8.2.6.1.2`
pktSwchAsyncRunProLineDisp This entry specifies the line display character, which is one character from IA5. The default selection is 18 (character DC2).	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.20`
pktSwchAsyncRunProEditServSig This entry specifies the editing PAD service signals. The integer values have the following meanings: (0) No editing PAD service signals (1) Ed…	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.21`
pktSwchAsyncRunProEchomask The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) included in the echo mask. The characters in the ec…	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.22`
pktSwchAsyncRunProParTreat This entry controls the generation of parity bits in the data sent to the local DTE and the checking of the parity bit when generated by the local DTE. The options are (1) parity…	column	Enumeration	`.1.3.6.1.4.1.164.8.2.6.1.23`
pktSwchAsyncRunProPageWait This entry specifies the number of line feed characters counted by the PAD before the page wait condition is entered. If the value is zero, page wait is disabled.	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.24`
pktSwchAsyncRunProRecallChar The character specified by this entry is used to escape from the data transfer mode and enter the PAD command mode. The integer values have the following meanings: (0) …	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.3`
pktSwchAsyncRunProEcho This determines if an echo of the input characters is retured to the DTE. The options are either 'echo enabled' or 'no echo'.	column	Enumeration	`.1.3.6.1.4.1.164.8.2.6.1.4`
pktSwchAsyncRunProDataForwChar The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) used as a data forwarding character. The data forwa…	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.5`
pktSwchAsyncRunProIdleTimer Packets will be forwarded when the idle timer expires. The idle time interval is specified as a multiple of 50 milliseconds. The multiple is given by the parameter value. For e…	column	Integer32	`.1.3.6.1.4.1.164.8.2.6.1.6`
pktSwchAsyncRunProDevFlowCont This parameter determines whether or not the PAD uses software flow control for the attached device. The options are either (1) PAD uses flow control during data transfer mode, …	column	Enumeration	`.1.3.6.1.4.1.164.8.2.6.1.7`
pktSwchAsyncRunProServSig This parameter is used to instruct the PAD whether to transfer PAD service signals and the PAD prompt to the local DTE in standard format. The options are (1) PAD service signals…	column	Enumeration	`.1.3.6.1.4.1.164.8.2.6.1.8`