systemVoiceDtmfRelayMethod
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.2.12.1.1.10
Object
column
r/w
Enumeration
This object indicates the DTMF Relay Method
that is used to transmit DTMF tones.
rfc2833(1) - inband DTMF relay according to RFC-2833.
sipInfo(2) - out of band DTMF relay using SIP INFO method.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.2.12.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- systemVoiceEntry
- Table
- systemVoiceTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| systemVoiceConfIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed - Active or Temporary Configurations.
Idx 255 relates to the temporary TmpCnfg.
All configurations can be rea… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.12.1.1.1 |
| systemVoiceDtmfRelayRxPayloadType This object indicates the Rx Payload Type
for DTMF relay RTP packets.
It is relevant only when DTMF Relay Method is RFC-2833. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.2.12.1.1.11 |
| systemVoiceDtmfRelayPayloadTypeNeg This object indicates whether Payload Type Negotiation is used
(according to RFC-2833) or not.
It is relevant only when DTMF Relay Method is RFC-2833. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.12.1.1.12 |
| systemVoiceDtmfRelayTxPayloadType This object indicates the Tx Payload Type
for DTMF relay RTP packets.
It is relevant only when the Payload Type Negotiation is disabled. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.2.12.1.1.13 |
| systemVoiceNationalTone Tone Characteristics (Amplitude, Frequency, delays etc.).
These characteristics are defined according to the country. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.12.1.1.2 |
| systemVoicePacketRate This object indicates the G.729 and G.711 Coders
transmitted Packet Rate in milliseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.2.12.1.1.3 |
| systemVoiceFaxSupport This object allows the user to Disable/Enable Fax support. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.12.1.1.4 |
| systemVoiceFaxRate This object indicates the Fax Rate limit.
It is irrelevant when Fax support is NA or disabled. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.12.1.1.5 |
| systemVoiceModemSupport This object allows the user to Disable/Enable Modem support. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.12.1.1.6 |
| systemVoiceCoderAndRate This object indicates the Coder and Rate for the Voice Compression. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.12.1.1.7 |
| systemVoiceEchoCanceler This object indicates the Echo Canceler activation. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.12.1.1.8 |
| systemVoiceTxGain This object indicates the Transmit Gain (volume) in dB. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.12.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdlCmprTypIdx This attribute indicates the Type of the Compressed being
referred. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.3.3.1.1.1 |
| mdlCmprCnfgIdx This attribute indicates the configuration to which the
Compressed information is related. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.3.3.1.1.2 |
| mdlCmprVersion This attribute indicates the version of the internal format
of the Compressed data | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.3.3.1.1.3 |
| mdlCmprSltIdx This attribute indicates a unique number of the slot
position where the card is inserted.
In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16)
are not valid. | column | Enumeration | .1.3.6.1.4.1.164.3.1.3.3.1.1.4 |