prtGsmConfigIdx2
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.2
Object
column
SNMPv2-SMIUnsigned32
The second index of the table.
This object might represent the port index
and for some devices might be the ifIndex.
For System level or when NA, value = 1.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.14.1.1.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- prtGsmConfigEntry
- Table
- prtGsmConfigTable
- Siblings
- 17
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | fail |
3 | ok |
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtGsmConfigIdx1 The first index of the table.
This object might represent the Configuration Index (1..100) being accessed,
where Index=255 relates to the TmpCnfg.
For devices with … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.1 |
| prtGsmConfigUnkTrauFrameSuppression This object enables/disables suppression of unknown TRAU frames. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.10 |
| prtGsmConfigUnkTrauFrameOptimization This object enables/disables optimization of unknown TRAU frames. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.11 |
| prtGsmConfigSilenceSuppressionRatio The Silence Suppression Ratio, measured in percentages (1%).
0 = No Suppression.
In case comfort noise is rapidly changed,
it may cause the silence to be heard like… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.12 |
| prtGsmConfigStatus This object enables the user to create/delete entries in this table.
Its usage for values (1)..(6) should be identical to RowStatus SYNTAX.
notApplicable(255) - sho… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.13 |
| prtGsmConfigUpstreamOptimization This object represents the Optimization Mode
at the Upstream direction (BTS -> BSC). | column | Bits | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.14 |
| prtGsmConfigDownstreamOptimization This object represents the Optimization Mode
at the Downstream direction (BSC -> BTS). | column | Bits | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.15 |
| prtGsmConfigByteReversal This object defines whether BTS/BSC reverses the bytes or not. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.16 |
| prtGsmConfigTxJitter The Transmit Jitter size (in msec), towards the BTS/BSC | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.17 |
| prtGsmConfigSpdThreshold The SPD (Smart Packet Drop) Threshold.
SPD mechanism decides which frames to drop
according to the voice energy of the frame.
A frame should be dropp… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.18 |
| prtGsmConfigIfType The GSM Interface Type. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.3 |
| prtGsmConfigUplinkTxDirection The Tx Direction toward the network. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.4 |
| prtGsmConfigSubChRate The Sub Channel Rate. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.5 |
| prtGsmConfigClockTracking The Clock Tracking.
This object is relevant only when Egress Uplink is LAN and
the device (e.g. Vmux) on the BSC side is Rx Clock and
the device (e.g. Vmux) on the BTS side is Int… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.6 |
| prtGsmConfigTrauIdleFrame The TRAU frame to be used between calls. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.7 |
| prtGsmConfigDownlinkTrauSilenceFrame The TRAU frame to be used in the downlink direction
for silence/missing data. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.8 |
| prtGsmConfigGprsFrame The GPRS Frame Type. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.14.1.1.1.9 |