mdlConfigSource
RAD-MIB ·
.1.3.6.1.4.1.164.3.4.2.1.1.1.9
Object
column
r/w
Enumeration
This object is applicable only for slots containing IMOD cards, when mdlSConfigMismatch=on/on1/on2. nearEnd - Near End - 1 modem has the correct configuration farEnd - Far End - 1 has the correct configuration nearEnd - Near End - 2 has the correct configuration farEnd - Far End - 2 has the correct configuration.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.4.2.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mdlParamEntry
- Table
- mdlParamTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | off |
3 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdlSIdx A unique number to identify a slot position in the modems
Hub. | column | Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.1 |
| mdlConfigGround Enables to connect or disconnect an IMOD card to the
ground.
disconnect - not connected to ground.
connect - connected to ground.
notApplicable - for other cards. | column | Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.10 |
| mdlCapabilities Indicates the optional capabilities that are implemented by this module
and are manageable through this MIB.
For each capability 1 BIT is allocated in each Octet starting fro… | column | OctetString | .1.3.6.1.4.1.164.3.4.2.1.1.1.11 |
| mdlClockSource The Clock Source of the Card.
Applicable for ASMi-52 modems only.
internal - means that the card uses its own Internal Clock
external - means that the card uses the Clock receive… | column | Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.12 |
| mdlSNoOfModems Number of modems on this card.
255 = notApplicable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.4.2.1.1.1.2 |
| mdlCardType Card's type. | column | Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.3 |
| mdlSPanelType LRS-12 Card connectors' panel type.
fx - IMOD panels
psxxx - PS panels
fxCm2 - CM-2 panels. | column | Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.4 |
| mdlSLed LEDs status on the card . Each led will be represented by 4
bits where the first 2 bits (left) will specify the Status :
(00=NA, 01=OFF, 10=ON, 11=BLINK),
and the next two bits … | column | OctetString | .1.3.6.1.4.1.164.3.4.2.1.1.1.5 |
| mdlSActiveAlarms This object is applicable only for PS and CL cards.
It gives the status of the Alarms for each Slot. Each bit
represents an alarm in the slot. For bit location of each
Alarm in … | column | OctetString | .1.3.6.1.4.1.164.3.4.2.1.1.1.6 |
| mdlAlrClear Setting this attribute to on, clears all the active (On)
alarms of the Slot. Upon completion, the value will
automatically change to off(2). | column | Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.7 |
| mdlSConfigMismatch This object is applicable only for slots containing
IMOD cards.
ON - when CM-2 realizes that the configuration of the
Near-End modem1 is different from that of its Far-End … | column | Enumeration | .1.3.6.1.4.1.164.3.4.2.1.1.1.8 |