atmCbrCnfgRxTimeSlots
RAD-MIB ·
.1.3.6.1.4.1.164.12.4.3.3.1.1.9
Object
column
r/w
TimeSlots
This value indicates the time-slots used by this connection for receiving. It uses 32 bits for E1 and low 24 bits for T1. each bit represents a time slot for receiving : time-slot 0 = bit 0 (LSB - most right bit in last byte), ... ... time-slot 31 = bit 31 (MSB - most left bit in first byte ). value '0' indicate unused time-slot and value '1' indicates used time-slot. On set-request the user indicates the time-slot he needs for requested ATM-Vcc by putting '1' to the right bits. note : time-slots '0' and '16' are used for signalling in E1 interface. Currently not in use. Must be '0'.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.4.3.3.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmCbrCnfgEntry
- Table
- atmCbrCnfgTable
- Siblings
- 14
Syntax
TimeSlots
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmCbrCnfgAtmIfIndex The ifIndex associated to the ATM interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.1 |
| atmCbrCnfgRxBytesPerCell number of bytes to be receive in order per cell to low the delay. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.10 |
| atmCbrCnfgTxTimeSlots This value indicates the time-slots used by this connection for receiving.
It uses 32 bits for E1 and low 24 bits for T1.
each bit represents a time slot for receiving :
time-slot… | column | TimeSlots | .1.3.6.1.4.1.164.12.4.3.3.1.1.11 |
| atmCbrCnfgTxBytesPerCell number of bytes to be transmit in order per cell to low the delay. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.12 |
| atmCbrCnfgParity Controls the use of pointer parity when using
the STRUCTURED or STRUCTURED WITH POINTER connection type.
as defined by atmCbrCnfgService.
ON - Pointer parity bit generat… | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.13 |
| atmCbrCnfgRowStatus This object is used to create a new row or
modify or delete an existing row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.12.4.3.3.1.1.14 |
| atmCbrCnfgService Define if DSx service is structured or unstructured.
A structured(3) interface is some nx64Kbps. (n x DS0 = n Time Slots)
An unstructured (2) interface is full DSx, x >0.
(1.544… | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.15 |
| atmCbrCnfgAtmVpi The Vpi number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.2 |
| atmCbrCnfgAtmVci The Vci number of the ATM end point. | column | Integer32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.3 |
| atmCbrCnfgCbrIfIndex The ifIndex associated to the logical interface of DS0s bundle
or to ifIndex of one of the data ports. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.4.3.3.1.1.4 |
| atmCbrCnfgAdminStatus The requested status of the connection. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.5 |
| atmCbrCnfgOperStatus The real operational status of the connection. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.6 |
| atmCbrCnfgLastChange The value of sysUpTime at the time the ATM to CBR
connection entered its mandatory operational state.
If the mandatory state was entered prior to the last
re-initialization of the… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.164.12.4.3.3.1.1.7 |
| atmCbrCnfgAAL1Signalling Not in use. Must be always 'off'. | column | Enumeration | .1.3.6.1.4.1.164.12.4.3.3.1.1.8 |