pktSwchHdlcCtsStatus
RAD-MIB ·
.1.3.6.1.4.1.164.8.5.2.1.19
Object
column
Enumeration
The CTS status.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.8.5.2.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pktSwchHdlcAEntry
- Table
- pktSwchHdlcATable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | no-Detect |
3 | linkFailure-Detect |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktSwchHdlcLinkNumberA The link number with which this entry is associated. This value corresponds to
pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtoc… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.5.2.1.1 |
| pktSwchHdlcDestDlciA The local DLCI which is used for HDLC encapsulation over Frame Relay. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.5.2.1.10 |
| pktSwchHdlcDestPortA The local port that is used for HDCL encapsulation over Frame Relay. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.5.2.1.11 |
| pktSwchHdlcProtocolA The HDLC protocol type. | column | Enumeration | .1.3.6.1.4.1.164.8.5.2.1.12 |
| pktSwchHdlcFlowContOptionsA This specifies the type of flow control of the HDLC link. The value is a sum of values
(powers of two), where each value in the sum represents an option. The values that may
be … | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.13 |
| pktSwchHdlcBufferFlowControlA The number of buffers that will be allocated for the HDLC link. | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.14 |
| pktSwchHdlcInternalClockA The baud rate of the internal clock. | column | Enumeration | .1.3.6.1.4.1.164.8.5.2.1.15 |
| pktSwchHdlcNrzModeA The data encoding format.
The value is a sum of values (powers of two), where each
value in the sum represents an option.
The values that may be included in the sum and their
mean… | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.16 |
| pktSwchHdlcConnStatus The status of the Hdlc session. | column | Enumeration | .1.3.6.1.4.1.164.8.5.2.1.17 |
| pktSwchHdlcSpecialStatus The status of the Hdlc link. | column | Enumeration | .1.3.6.1.4.1.164.8.5.2.1.18 |
| pktSwchHdlcDestAddrA The destination address. It defines the X.25 address on the remote device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.8.5.2.1.2 |
| pktSwchHdlcRunningX25Lcn The format of the string is ifIndex:LCN | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.8.5.2.1.20 |
| pktSwchHdlcRunningDlci The format of the string is ifIndex:DLCI | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.8.5.2.1.21 |
| pktSwchHdlcMaxBuffToNet The maximum number of buffers above which Flow Control is enabled | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.5.2.1.22 |
| pktSwchHdlcBuffToNet The number of buffers waiting for transmission. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.8.5.2.1.23 |
| pktSwchHdlcDestSubAddrA The destination subaddress. It defines the synchronous link subaddress on the remote
device. | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.3 |
| pktSwchHdlcRedialTimeoutA The time interval in seconds between two consecutive connect operations retries. | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.4 |
| pktSwchHdlcRedialRetriesA This defines how many times the call operation is repeated if the call request has failed. | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.5 |
| pktSwchHdlcInactivityA The amount of time in minutes of inactivity that will cause the
session to disconnect. | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.6 |
| pktSwchHdlcX25FacilitiesA This specifies the X.25 facilities. The value is a sum of values (powers of two), where each
value in the sum represents an option. The values that may be included in the sum an… | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.7 |
| pktSwchHdlcLocalSubaddr1A The first local subaddress. | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.8 |
| pktSwchHdlcLocalSubaddr2A The secondary local subaddress. | column | Integer32 | .1.3.6.1.4.1.164.8.5.2.1.9 |