agnDlciRoutingProtocol

RAD-MIB · .1.3.6.1.4.1.164.3.1.2.8.1.1.16
MIB view Table view

Object

column r/w Enumeration 
This object is relevant only when one side of the DLCI is a CL-NMS interface.
It defines which Routing Protocol will be used for management via CL-NMS port.
notApplicable will be used for all slots but CL.
rip is a proprietary rip protocol.
              
Default=rip.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.3.1.2.8.1.1.16
Type
column
Access
readwrite
Status
current
Parent
agnDlciEntry
Table
agnDlciTable
Siblings
16

Syntax

Enumeration

Values & Constraints

Enumerated Values
1notApplicable
2legacy
3r2Cas

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agnDlciCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
columnInteger32.1.3.6.1.4.1.164.3.1.2.8.1.1.1
agnDlciRxBc
This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line.
columnEnumeration.1.3.6.1.4.1.164.3.1.2.8.1.1.10
agnDlciRxBe
This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line.
columnEnumeration.1.3.6.1.4.1.164.3.1.2.8.1.1.11
agnDlciPriority
This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 7 is the highest priority.
columnInteger32.1.3.6.1.4.1.164.3.1.2.8.1.1.12
agnDlciStatus
This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected
columnEnumeration.1.3.6.1.4.1.164.3.1.2.8.1.1.13
agnDlciSpoofing
This object refers to sending of RIP messages: - yes : RIP messages will be sent ONLY if there is a change in the Net. - no : RIP messages will be always sent. This objec…
columnEnumeration.1.3.6.1.4.1.164.3.1.2.8.1.1.14
agnDlciFunnelEnable
This object selects Funnel activation: - disabled: Funnel operation will be disabled. The agnDlciTxBe and agnDlciTxBc values are not used for funnel…
columnEnumeration.1.3.6.1.4.1.164.3.1.2.8.1.1.15
agnDlciRowStatus
This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1). For destroying a row, …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.164.3.1.2.8.1.1.17
agnDlciLSltIdx
This attribute indicates a unique slot position where the card is inserted. This is the Source Slot of the DLCI. vs=Voice Switching In the ?004 Unit the entries io6(10)..io1…
columnEnumeration.1.3.6.1.4.1.164.3.1.2.8.1.1.2
agnDlciLPrtIdx
This attribute indicates a unique external or internal port number, including linkSelector or encapsulator. This is the Source Port of the DLCI. 100=noConnect (for voice swit…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.2.8.1.1.3
agnDlciLIdx
This attribute indicates a unique index for each possible used DLCI(16..991). This is the Source Side of the DLCI. 0=notApplicable (for voice switching) LIdx is defined according …
columnInteger32.1.3.6.1.4.1.164.3.1.2.8.1.1.4
agnDlciHSltIdx
This attribute indicates a unique slot position In the Mux where the DLCI is routed to - Destination Slot. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1(5) and io2(6) =…
columnEnumeration.1.3.6.1.4.1.164.3.1.2.8.1.1.5
agnDlciHPrtIdx
This attribute indicates a unique port number where the DLCI is routed to - Destination Port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.2.8.1.1.6
agnDlciHIdx
This attribute indicates a unique internal connection DLCI number where the Source DLCI is routed to - the Destination Side of the DLCI.
columnInteger32.1.3.6.1.4.1.164.3.1.2.8.1.1.7
agnDlciTxBc
This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line.
columnEnumeration.1.3.6.1.4.1.164.3.1.2.8.1.1.8
agnDlciTxBe
This attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line.
columnEnumeration.1.3.6.1.4.1.164.3.1.2.8.1.1.9