sysCRdnLosOrLofTime

RAD-MIB · .1.3.6.1.4.1.164.3.3.1.6.3.1.14

Object

column r/w SNMPv2-SMIInteger32

This parameter determines how much time to wait before switching,
after LOF or LOS are detected on the TDM Line.
For Ipmux time is counted in msec.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.3.1.6.3.1.14
Type: column
Access: readwrite
Status: current
Parent: sysCRdnEntry
Table: sysCRdnTable
Siblings: 22

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Enumerated Values

`1`	psA
`2`	psB
`3`	clA
`4`	clB
`5`	io1
`6`	io2
`7`	io3
`8`	io4
`9`	io5
`10`	io6
`11`	io7
`12`	io8
`13`	io9
`14`	io10
`15`	io11
`16`	io12
`17`	io13
`18`	io14
`19`	io15
`20`	psC
`101`	kmxPsA
`102`	kmxPsB
`103`	kmxMlA
`104`	kmxMlB
`105`	kmxCl
`106`	kmxOpt
`107`	kmxIO1
`108`	kmxIO2
`109`	kmxIO3
`110`	kmxIO4
`111`	kmxIO5
`112`	kmxIO6
`113`	kmxIO7
`114`	kmxIO8
`115`	kmxIO9
`116`	kmxIO10
`117`	kmxIO11
`118`	kmxIO12

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
sysCRdnCnfgIdx This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.1`
sysCRdnRowStatus This parameter allows NMS to create/delete entries of this table. The possible supported RowStatus values are active (1) and destroy (6). For Vmux-2100 the supporte…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.164.3.3.1.6.3.1.10`
sysCRdnOnline Status - who is the Online (current) Redundancy Slot/Port. This object shows only the Online Slot/Port regarding the Redundancy. mdlSActivity or prtGenActiveStatus of the same S…	column	Enumeration	`.1.3.6.1.4.1.164.3.3.1.6.3.1.11`
sysCRdnSwitchingMode This object defines which Self Healing Ring (SHR) SDH ring is used: Uni Directional or BiDirectional. The type of the ring is defined according to the direction of traffic flow u…	column	Enumeration	`.1.3.6.1.4.1.164.3.3.1.6.3.1.12`
sysCRdnFlipUponEvent This object allows user to define if Flip to the other port will be performed (or not), for certain possible events. Each event is represented by a bit. The value of the object is…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.13`
sysCRdnEventsTimeWindow This parameter determines the time window in which to count events to trigger protection switching. For Ipmux time is counted in seconds.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.15`
sysCRdnSequenceNumberThreshold This parameter determines the number of Sequence Number errors that should occur in the time window in order to cause switching.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.16`
sysCRdnBufferErrorsThreshold This parameter determines the number of Buffer undeflow/ overflow events occured in the time window that cause switching.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.17`
sysCRdnBuffUnderrunTime This parameter determines how much time to wait before switching, after jitter buffer underrun. Switching occurs if no frame arrives within that time. For Ipmux time is counted …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.18`
sysCRdnPrimePriority The Primary port priority. In ETX2xx/2xxA: When selecting sysCRdnMode = manual (10), this parameter determines the forced active port: low - means that the sec…	column	Enumeration	`.1.3.6.1.4.1.164.3.3.1.6.3.1.19`
sysCRdnPrimeSlot The slot number of the Primary card of Redundancy. The Primary card should be the card that user wishes to be the online card (usually the more important one). For some Redundancy…	column	Enumeration	`.1.3.6.1.4.1.164.3.3.1.6.3.1.2`
sysCRdnSecPriority The Secondary port priority.	column	Enumeration	`.1.3.6.1.4.1.164.3.3.1.6.3.1.20`
sysCRdnWTR Redundancy Wait to Restore (sec). Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of sysCRdnRecTime must be 65535.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.21`
sysCRdnName A textual name for the redundancy group.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.164.3.3.1.6.3.1.22`
sysCRdnTxDownDurationUponFlip This object defines the duration (in seconds) the active port transmission is shut down after flip occurs. The transmission is shut down and then opened again (after the durati…	column	Unsigned32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.23`
sysCRdnPrimePort The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.3`
sysCRdnSecSlot The slot number of the Secondary card of Redundancy matching the Primary slot.	column	Enumeration	`.1.3.6.1.4.1.164.3.3.1.6.3.1.4`
sysCRdnSecPort The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.5`
sysCRdnMode Redundancy Mode. DXC supports: yCable(3), singleSlotProtection(6) and dualCableParallelTx(4) MP supports: yCable(3), dualCableParallelTx(4), onePlusOne(7) and oneToOne(8). …	column	Enumeration	`.1.3.6.1.4.1.164.3.3.1.6.3.1.6`
sysCRdnRecMode Recovery Mode. This object determines if after recovery of the failed Primary card/port it will become on-line again or not: auto - automatic . In this case, the failed card/port …	column	Enumeration	`.1.3.6.1.4.1.164.3.3.1.6.3.1.7`
sysCRdnRecTime Redundancy Recovery Time (sec). After switching to the current online card, the next switch can be performed only after a minimum time, indicated by this object. Valid Value…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.1.6.3.1.8`
sysCRdnHwSwFlip HW or SW decision for Redundancy Flip. This object is applicable only for sysCRdnMode=singleSlotProtection. HW - decision is by I/O card SW - decision is by CL SW.	column	Enumeration	`.1.3.6.1.4.1.164.3.3.1.6.3.1.9`