modmPrtLineRAP
RAD-MIB ·
.1.3.6.1.4.1.164.3.4.4.5.1.1.8
Object
column
r/w
Enumeration
Rate Adapting Protocol. privateV110Enable (4)= private but enables return to v110.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.4.4.5.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- modmPrtLineEntry
- Table
- modmPrtLineTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | internal |
3 | external |
4 | lbt |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| modmPrtLineIndex The Line port index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.4.4.5.1.1.1 |
| modmPrtLineCdSense Carrier Detect Sense - Detection Sensitivity of Carrier Wave.
high - high sensitivity
low - low sensitivity. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.10 |
| modmPrtLineAIS AIS enable/disable.
notApplicable - for modems that do not support this feature. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.11 |
| modmPrtLineCoding Line Coding. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.12 |
| modmPrtLineLength This attribute is the line length mask parameter used only
for T1/DSU interfaces.
len400p533ft=length range: 400ft to 533ft. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.13 |
| modmPrtLineClkSrcPort Clock Source Port.
This parameter is relevant for external clock source. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.14 |
| modmPrtLineDteClkConfig Indicates the clock source of the modems, which were not selected to supply
the external clock. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.15 |
| modmPrtLineMaskAlr This parameter determine whether masking or not the alarms for this line. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.16 |
| modmPrtLineClkSrc The clock source of the Line port.
(5),(6) - applicable only for ASMi-24 and ASMi-50.
(7),(8) - System level Clock Source. Applicable to CQ modems. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.2 |
| modmPrtLineTxLevel Transmit level in dBm.
pxx = positive xx = +xx
nxx = negative xx = -xx | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.3 |
| modmPrtLineRxLevel Rx Sensitivity in dBm.
pxx = positive xx = +xx
nxx = negative xx = -xx. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.4 |
| modmPrtLineOutImp Output impedance in Ohm. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.5 |
| modmPrtLineInImp Input impedance in Ohm. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.6 |
| modmPrtLineCarrCntrl Carrier control. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.7 |
| modmPrtLineWaveLength Wave Length of the optical Line.
notApplicable - when the modem Line is not optical.
The units are nano-meters [nm]. | column | Enumeration | .1.3.6.1.4.1.164.3.4.4.5.1.1.9 |