v51VarCfgExtDchTs
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.18
Object
column
r/w
Integer32
This object is applicable only if v51VarCfgExtDch=yes(3). It indicates the TS on the non-V5 ML on which the External D channel TS is defined (and is transferred via Bypass between the V5 ML and the non-V5 ML.) For V5.1: 0=notApplicable For V5.2: 0=None, 32=notApplicable.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.6.2.2.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- v51VarCfgEntry
- Table
- v51VarCfgTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Enumerated Values
2 | no |
3 | yes |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| v51VarCfgIndex This attribute indicates the Idx of the Cnfg being accessed.
255 = TmpCnfg.
1 = Current Cnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.1 |
| v51VarCfgPTypeCch For V5.1 - This object indicates which TS will be used for P-Type C channel.
notApplicable (1),
ts15 (2),
ts16 (3),
ts31 (4)
For V5.2 - this obje… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.10 |
| v51VarCfgConSlt The Slot containing the IO port this TS is connected to.
For V5.2 this object is notApplicable. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.11 |
| v51VarCfgConPrt The IO Port this TS is connected to.
Valid values: exPrt1 (1)..exPrt12 (12), inPrt1(101)..inPrt4(104).
100=noConnect
For V5.2 this object is notApplicable=255. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.12 |
| v51VarCfgIoState The State of the IO port this TS is connected to.
This object is not applicable for v51VarCfgIndex=255=TmpCnfg.
normal(2) - will be used for operating normally (operate)
localBloc… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.13 |
| v51VarCfgBlock This object indicates if this TS will be Blocked or not and how:
block - done locally
blockRequest - according to external request of the telephone exchange. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.14 |
| v51VarCfgExtDch For V5.1: This object indicates if this TS is an ISDN D channel that
comes via Bypass from a non-V5.1 ML.
For V5.2: this object will be notApplicable (not supported). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.15 |
| v51VarCfgExtDchSlot This object is applicable only if v51VarCfgExtDch=yes(3).
It indicates the Slot of the non-V5.1 ML on which the External D channel
TS is defined (and is transferred via Bypass bet… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.16 |
| v51VarCfgExtDchPort This object is applicable only if v51VarCfgExtDch=yes(3).
It indicates the Port on the Slot of 'v51VarCfgExtDchSlot' of the
non-V5.1 ML on which the External D channel TS is defi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.17 |
| v51VarCfgExtDchCmpr For V5.1 - this object is applicable only if v51VarCfgExtDch=yes(3).
It indicates if this ISDN D channel TS is Compressed or not. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.19 |
| v51VarCfgSltIdx Slot Index.
For V5.2, this index will be the Slot of the V5.2 Master ML. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.2 |
| v51VarCfgExtDchRate For V5.1 - this object is applicable only if v51VarCfgExtDch=yes(3).
It indicates the Rate of the ISDN D channel. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.20 |
| v51VarCfgExtDchStartBit For V5.1 - this object is applicable only if v51VarCfgExtDch=yes(3).
It indicates the Start Bit of the ISDN D channel on the TS of
the non-V5.1 ML on which it is defined.
Val… | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.21 |
| v51VarCfgSTypeCch This object is supported only by V5.2. It indicates the Logical
C Channel S Type (0..65535).
65536=not applicable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.22 |
| v51VarCfgStatus This object is supported only by V5.2.
It enables to create new entries and delete existing entries
from the table. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.23 |
| v51VarCfgV52MasterTsa This object is supported only by V5.2.
This will be the V5.2 Master, Switch Allocated Location. It is
a concatenation of SS:PP:TS of the V5.2 Master.
It indicates which is the… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.24 |
| v51VarCfgPrtIdx This attribute indicates a unique port number of the ML having
V5 interface.
Valid values: exPrt1 (1)..exPrt4 (4), inPrt1(101)..inPrt4(104)
notApplicable(255) - for V5.2 only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.3 |
| v51VarCfgIdx Variant Id.
Valid values:
- for Current Cnfg: 0..127
- for Tmp Cnfg: until MP R9 : 255 only.
from MP R10: 0..127. | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.4 |
| v51VarCfgTsIdx For V5.1: Time Slot index (1..31).
For V5.2: Running Index (1..1320) for Address Table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.5 |
| v51VarCfgTsType Time Slot Type. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.6 |
| v51VarCfgPrtId This object indicates the IO Port Id this TS is connected to.
For V5.2, the Port Id is a concatenation of SS:PP:TS of the port
connected to V5.2 Master.
SS=IO Slot (1..12)
PP=Por… | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.7 |
| v51VarCfgEfL3Addr This object indicates the Address of the IO port this TS is connected to.
The IO port is identified according to its Address:
- for ISDN ports: EF Address. Valid values: 0..8175
… | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.8 |
| v51VarCfgFTypeCch For V5.1 - this object indicates which TS will be used for F-Type C channel.
notApplicable (1),
ts15 (2),
ts16 (3),
ts31 (4)
For V5.2 - this obje… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.6.2.2.1.9 |