pwGenOutgoingInterface
RAD-MIB ·
.1.3.6.1.4.1.164.14.1.1.1.1.4
Object
This is a unique index within the ifTable. It represents
the outgoing interface (towards the PSN ) attached to
this PW connection.
This object is applicable only for MPLS peer, for device
without router, when Next Hop is not defined.
A value of zero indicates an interface index that has yet
to be determined, or it is not applicable.
Once set, if the outgoing interface is (for some reason) later
removed, the agent should DELETE the associated PW rows.
If the agent does not delete the rows,
the agent MUST set this object to zero.
This object is applicable only for devices that allow
manual configuration of outgoing interface.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.14.1.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pwGenEntry
- Table
- pwGenTable
- Siblings
- 18
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | disable |
3 | enable |
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwIdx Index of this table.
The value for this object is equal to the value
of pwIndex from the pwTable of PW-STD-MIB | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.14.1.1.1.1.1 |
| pwGenIpNextHop This object defines local Next Hop IP Address for this PW.
0.0.0.0 - means - not applicable.
This object is applicable only when pwGenNextHopType=ipV4 | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.14.1.1.1.1.10 |
| pwGenMacNextHop This object defines local Next Hop MAC Address for this PW.
0:0:0:0:0:0 - means - not applicable.
This object is applicable only when pwGenNextHopType=bridgePort | column | MacAddress | .1.3.6.1.4.1.164.14.1.1.1.1.11 |
| pwGenEnableVlanTag This object enables or diables a VLAN tag on
every transmitted paket via this PW connection | column | Enumeration | .1.3.6.1.4.1.164.14.1.1.1.1.12 |
| pwGenVlanId This object indicates the VLAN ID tag attached
to every transmitted packet via this PW connection.
This entry is applicable only if pwGenEnableVlanTag=enabled (3). | column | Unsigned32 | .1.3.6.1.4.1.164.14.1.1.1.1.13 |
| pwGenVlanPriority This object indicates the VLAN priority assigned
to every transmitted packet via this PW connection.
This entry is applicable only if pwGenEnableVlanTag=enabled (3) | column | Unsigned32 | .1.3.6.1.4.1.164.14.1.1.1.1.14 |
| pwGenIpTos This object indicates TOS field value
for pw having pwPsnType= ip (3) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.14.1.1.1.1.15 |
| pwGenSourceUdpPort This object indicates source UDP port (1...65535) value
for pw having pwPsnType= ip (3) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.14.1.1.1.1.16 |
| pwGenSubType This object indicates the PW Sub Type
(i.e. Sub Type of 'pwType' from 'pwTable').
For ACE-3000 devices:
It is applicable only when pwType = basicCesPsn(21). | column | Enumeration | .1.3.6.1.4.1.164.14.1.1.1.1.17 |
| pwGenSourceIpAddress Source IP Address per PW | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.14.1.1.1.1.18 |
| pwGenSourceIpMask Source IP Mask per PW | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.164.14.1.1.1.1.19 |
| pwGenPeerIdx This object indicates the Index of the Peer
(as it is defined in the Peer Table), which terminated this PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.14.1.1.1.1.2 |
| pwGenAttachmentCircuit This is a unique index within the ifTable. It represents
the attached circuit interface (e.g ATM VC, HDLC) attached to
this PW connection (from service initiator side).
… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.14.1.1.1.1.3 |
| pwGenOamMode This objects defines whether OAM will be enabled on this PW.
notApplicable(1) value will be used when
PW type does not support OAM. | column | Enumeration | .1.3.6.1.4.1.164.14.1.1.1.1.5 |
| pwGenOamType This objects defines the failure detection mechanism used
on this PW.
BFD - Bidirectional Forwarding Detection
notApplicable(1) value will be used when
pwGenOamMode is notApplica… | column | Enumeration | .1.3.6.1.4.1.164.14.1.1.1.1.6 |
| pwGenSequenceNumberField This object defines whether processing of Sequence Number field
(ATM cell encapsulation) will be done by device, on this PW. | column | Enumeration | .1.3.6.1.4.1.164.14.1.1.1.1.7 |
| pwGenNextHopType Indicates address type of the Next Hop.
Not applicable for device with router. | column | Enumeration | .1.3.6.1.4.1.164.14.1.1.1.1.8 |
| pwGenNextHop Not applicable (=0) when pwMplsEgressTunnelNextHopType=notApplicable.
When applicable, represents ATM VC, Bridge Port,
according to pwMplsEgressTunnelNextHopType. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.14.1.1.1.1.9 |