prtExVc2RemType

RAD-MIB · .1.3.6.1.4.1.164.3.2.3.2.5.1.26

Object

column r/w Enumeration

Remote Type.
Applicable for VC-6A/4LB card &
for IPMUX-1E Far End Type - E1,T1(T1-ESF) or T1-D4 .

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.2.3.2.5.1.26
Type: column
Access: readwrite
Status: current
Parent: prtVc2CnfgEntry
Table: prtVc2CnfgTable
Siblings: 39

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtVc2CnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.5.1.1`
prtExVc2Oos This object is equal for all the ports in the specific card because of HW limitations	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.10`
prtExVc2LinkTo deprecated This attribute indicates the slot of the ML card to which the VC card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.11`
prtExVc2OperMode This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.12`
prtExVc2SigProfile This object indicates the Signaling Profile of the port. notApplicable - for VC-2 family and when prtExVc2Sig=noSignaling(1) p1 = profile 1 p2 = profile 2 p3 = pro…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.13`
prtExVc2CallEnable This object indicates the Enabled Call direction. notApplicable - for all cards except VC-2/R2. both - incoming + outgoing.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.14`
prtExVc2R2Delay This object indicates the R2 Delay. notApplicable - for all cards except VC-2/R2.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.15`
prtExVc2CasStd This object indicates the CAS (Channel Associated Signaling) Standard. notApplicable - for all cards except VC-2/R2.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.16`
prtExVc2EchoCanceler Echo canceler activation. notApplicable - for VC-2 and VC-6 cards.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.17`
prtExVc2IfType Interface Type.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.18`
prtExVc2Encoding Voice Encoding Mode. linear - is relevant only for the ports of VC-16A card.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.19`
prtVc2SltIdx This attribute indicates a unique slot position where the card is inserted. For Stand Alone products like WR: notApplicable (255)	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.2`
prtExVc2TxBitCode - - - For MP & FCD - - - This object represents 4 parameters, by 2 Octets : Tx D Bit Code-MSB nibble, Tx C Bit Code- nibble, Tx B Bit Code- nibble, Tx A Bit C…	column	OctetString	`.1.3.6.1.4.1.164.3.2.3.2.5.1.20`
prtExVc2RxBitOutput - - - For MP (VC-Q card only) & FCD - - - This object represents 3 parameters by 2 Octets: Spare -MSB nibble, always=0 hex E Lead Output - nibble, Reverse Polar…	column	OctetString	`.1.3.6.1.4.1.164.3.2.3.2.5.1.21`
prtExVc2MeterRate This entry is applicable only for VC-6A/FXO, VC-6A/FXS, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS. Meter Rate means rate of Call Meter in Public Phones, in KHz units. For some c…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.22`
prtExVc2IfSignaling This entry is applicable only for VC-6A, VC-6AG, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS cards. Interface Analog Signaling. Must be the same for all card's ports. loopStart - …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.23`
prtExVc2SeizeAck This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook signal it will transmit…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.24`
prtExVc2EandMType This is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.25`
prtExVc2ConvTime Conversation Time in minutes. Applicable for VC-6A/4LB card.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.27`
prtExVc2SigFeedback Signaling Feedback. Applicable for VC-8/FXO and VC-16/FXO cards.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.28`
prtExVc2EchoCancelerModule This parameter indicates whether Echo canceler module exists for this port.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.29`
prtVc2PrtIdx A unique identifier of the port, within the card. For MP-2100/2200 card ports, Web Ranger and FCD-IP Voice ports the values will be: exPrt1 (1) exPrt2 (2) exPrt3 (…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.5.1.3`
prtExVc2ReversePolarity This object Enables/Disables Reverse Polarity for this port.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.30`
prtExVc2RingerFrequency This object selects the Ringer Frequency (Hz) for this port.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.31`
prtExVc2SigService Signaling Service. advanced - is relevant only for ports of VC-8, VC-16 FXS cards. It is used for Signaling Services of V5.1 or R2.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.32`
prtExVc2CallerIdEnable This object Enables/Disables Receiving the Caller Id number from the remote side, for this port/channel.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.33`
prtExVc2CompressMethod This object is applicable only when prtExVc2Encoding=adpcm. It defines which method is used for Compression. g726 - for 4 bits (the standard method). g726 - for 3 bits. It is espe…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.34`
prtExVc2ObMode This object defines the Net operation mode of the Omni-Bus card's port. pointToPoint - only 2 end-point ports talk; like any other voice card omniBus - many talk and listen. …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.35`
prtExVc2VAD This object defines whether Voice Activation Detector (VAD) will be On or Off. off - will be usually selected when a Modem is connected to the port; not a phone. not…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.36`
prtExVc2NoiseLevelForVAD This object defines the Level of Noise on the line, the Voice Activation Detector (VAD) will have to deal with. notApplicable - when prtExVc2VAD=off.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.37`
prtExVc2WesternSigMode This object defines the Western Signaling Mode. detector - detects signal and passes it as is. generator - generates the signal. notApplicable - when Western HW is not installed.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.38`
prtExVc2BusProtectionPoint This object defines if the port is Bus Protection Point or not. notApplicable - when prtExVc2DspMode=pointToPoint. When we have a chain of devices where the edge devices ports are…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.39`
prtExVc2Connect This attribute indicates whether the port should be considered in any of the mux algorithms.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.4`
prtExVc2ImpedanceStandard This object defines the Standard used for Impedance. -G.712 - 600 Ohm - used in USA and other countries. -Q552/ETSI - used in some countries in Europe -Q522/Italy - used in Italy.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.40`
prtExVc2TransGain Transmit gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be in 0.5dBm steps.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.5.1.5`
prtExVc2ReceiveGain Receive gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be in 0.5dBm steps.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.2.3.2.5.1.6`
prtExVc2Wire For some cards, this object is equal for all the ports in the specific card because of HW limitations. For FXO & FXS this parameter is not applicable.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.7`
prtExVc2CodingLaw This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for T1 links. …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.8`
prtExVc2Sig This attribute indicates the method for decoding/encoding the signaling information(on/off hook). noSignaling (1) - not using signaling (only voice). robbedBitMultiFrame(2)…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.5.1.9`