pktSwchFrCircuitIsdnRoutIdA

RAD-MIB · .1.3.6.1.4.1.164.8.8.6.1.26
MIB view Table view

Object

column Integer32 
ISDN destination. ID in the ISDN routing table containing
the outgoing ISDN address for this DLCI.
              
Default value: 0 for no ISDN routing ID.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.8.8.6.1.26
Type
column
Access
readonly
Status
current
Parent
pktSwchFrCircuitAEntry
Table
pktSwchFrCircuitATable
Siblings
25

Syntax

Integer32

Values & Constraints

Enumerated Values
2off
3on

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pktSwchFrCircuitIfIndexA
This is the ifIndex of the circuit, according to RFC 1573.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.8.6.1.1
pktSwchFrCircuitRxCommittedA
The Rx committed rate in bytes per interval.
columnInteger32.1.3.6.1.4.1.164.8.8.6.1.10
pktSwchFrCircuitRxExcessA
The Rx excess in bytes per interval.
columnInteger32.1.3.6.1.4.1.164.8.8.6.1.11
pktSwchFrCircuitFunnelIdA
The funnel ID.
columnInteger32.1.3.6.1.4.1.164.8.8.6.1.12
pktSwchFrCircuitFunnelStat
The funnel status.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.164.8.8.6.1.13
pktSwchFrCircuitTxCongDiscards
The number of frames discarded because of Tx congestion.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.8.6.1.14
pktSwchFrCircuitDeTxFrames
The number of DE Tx frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.8.6.1.15
pktSwchFrCircuitDeRxFrames
The number of DE Rx frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.8.6.1.16
pktSwchFrCircuitFecnTxFrames
The number of FECN Tx frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.8.6.1.17
pktSwchFrCircuitBecnTxFrames
The number of BECN Tx frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.8.6.1.18
pktSwchFrCircuitCommRateViolTxFrames
The number of Tx committed rate violations in number of frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.8.6.1.19
pktSwchFrCircuitIndexA
This Index is the DLCI of the circuit.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.8.6.1.2
pktSwchFrCircuitCommRateViolRxFrames
The number of Rx committed rate violations in number of frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.8.6.1.20
pktSwchFrCircuitExcessRateViolTxFrames
The number of Tx excess rate violations in number of frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.8.6.1.21
pktSwchFrCircuitExcessRateViolRxFrames
The number of Rx excess rate violations in number of frames.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.164.8.8.6.1.22
pktSwchFrCircuitState
Indicates whether the particular virtual cir- cuit is new or not.
columnEnumeration.1.3.6.1.4.1.164.8.8.6.1.23
pktSwchFrCircuitExtendedDlciA
The no. of the DLCI represented in 23 bits.
columnInteger32.1.3.6.1.4.1.164.8.8.6.1.24
pktSwchFrCircuitTxPriorityA
DLCI TX Priority level. The levels are defined in the pktSwchTxPriorityTable
columnInteger32.1.3.6.1.4.1.164.8.8.6.1.25
pktSwchFrCircuitDestProtA
The protocol encapsulation, if any, on this DLCI. The MPE protocol is a proprietary RAD protocol that enables a generic HDLC device to have multiple connections over X.25 or Frame…
columnEnumeration.1.3.6.1.4.1.164.8.8.6.1.3
pktSwchFrCircuitDestIdA
If the DLCI destination protocol is none or async, this field has a value of an existing DLCI or async channel, respectively. Otherwise, a value of zero is used.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.164.8.8.6.1.4
pktSwchFrCircuitBackIdA
The backup DLCI which is used when the current DLCI goes inactive. The destination protocol and destination id are the same as in the current DLCI
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.164.8.8.6.1.5
pktSwchFrCircuitTxCirIntervalA
The Tx CIR interval in 1/10 seconds.
columnInteger32.1.3.6.1.4.1.164.8.8.6.1.6
pktSwchFrCircuitTxCommittedA
The Tx committed rate in bytes per interval.
columnInteger32.1.3.6.1.4.1.164.8.8.6.1.7
pktSwchFrCircuitTxExcessA
The Tx excess in bytes per interval.
columnInteger32.1.3.6.1.4.1.164.8.8.6.1.8
pktSwchFrCircuitRxCirIntervalA
The Rx CIR interval in 1/10 seconds.
columnInteger32.1.3.6.1.4.1.164.8.8.6.1.9