sysGenConfigIdx
RAD-MIB ·
.1.3.6.1.4.1.164.3.6.1.1.1.1.1
Object
column
Integer32
This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). The write operation in this Table is valid only to the TmpCnfg entry.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.6.1.1.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sysGenKmuxEntry
- Table
- sysGenKmuxTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | idleBusy |
3 | forcedIdle |
4 | busyIdle |
5 | forcedBusy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysGenResetBypassEnable Enable/Disable Reset Bypass operation when a KDI card exists
and one of its links failed.
notApplicable - when no KDI card exists in the Hub. | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.10 |
| sysGenRebuildFrame How to rebuild frame (when a CH is connected/disconnected):
automatically - immediately, by automatic frame allocation (by Kmux)
manually - manually configured frame allocation (b… | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.11 |
| sysGenFlipIntegration The parameter is relevant only for KM-2100 and only when
sysGenMlMode=redundancy, switchBackup, or priorityBumping. | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.2 |
| sysGenMlMode The Main Link operation mode. Determines how many links are
used (one/two) and how they are used. | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.3 |
| sysGenFaType Frame Allocation type:
auto - automatic frame allocation (by Kmux)
manual - manually configured frame allocation (by user). | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.4 |
| sysGenLinkRecovery The parameter determines the Link Recovery mode.
The parameter is relevant only when the sysGenMlMode is either
switchBackup or priorityBumping. | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.5 |
| sysGenLinkSourceClock The source clock for the links. The parameter is relevant
only for KM-2100 having a KDI or KDI/CH cards. ML-A or ML-B
are selectable only when sysGenMlMode=dual or priorityBumpi… | column | Enumeration | .1.3.6.1.4.1.164.3.6.1.1.1.1.6 |
| sysGenMngBwA The required management rate for ML-A, in bps. It is very important when a remote
unit is managed.
The selected value must be < ML-A Rate value.
0 = None or not applicable
800 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.6.1.1.1.1.7 |
| sysGenMngBwB The required management rate for ML-B, in bps. It is very important when a remote
unit is managed.
The selected value must be < ML-B Rate value.
0 = None or not applicable
800 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.6.1.1.1.1.8 |
| sysGenAutoDialSlot This object indicates the IO-SLOTs that can be used to initiate Automatic
DialUp.
This field will be applicable when KML.10 is a ML and its
prtIsdnSwitchMode=auto.
Each IO Slot i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.6.1.1.1.1.9 |