modemMaskTraps

RAD-MIB · .1.3.6.1.4.1.164.3.4.3.1.1.1.13

Object

column r/w SNMPv2-SMIInteger32

The value determines the modem traps the agent should mask 
and not send to the management console. 
The value is a sum of 2**n, where n is a bit assigned to a 
certain trap. For bit assignment see modem's specification.
Value of '0', means that no trap should be masked.

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.3.4.3.1.1.1.13
Type: column
Access: readwrite
Status: current
Parent: modemParamEntry
Table: modemParamTable
Siblings: 35

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Object Constraints

range: 0-1

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
modemIdx For LRS: A unique number to identify a modem in the Hub or its far-end modem. For DXC: This will be the ifIndex of the External Port of D8SL card, that works with this modem/prod…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.4.3.1.1.1.1`
modemHubId 4 Hex characters, identifying the Hub. The last two characters (least significant) will be displayed on the Hub's CL card by a 7 segment display. This object is applicable only …	column	OctetString	`.1.3.6.1.4.1.164.3.4.3.1.1.1.10`
modemIpAddress For LRS: The IP address of the LRS-12 agent . If the modem is NOT an LRS-12 card, the variable will be 0.0.0.0. For DXC and MP: the IP Address of the Far-End unit.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.164.3.4.3.1.1.1.11`
modemPsType The type of PS, for a stand-alone modem. notApplicable - for LRS-12 or Rack 214 card.	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.12`
modemActiveAlarms Status of the Alarms for each modem. Each bit represents an alarm. For bit location of each Alarm in the Octet String see modem's specification. A bit is '1' if the alarm is…	column	OctetString	`.1.3.6.1.4.1.164.3.4.3.1.1.1.14`
modemAlrClear Setting this attribute to on, clears all the active (On) alarms of the modem. Upon completion, the value will automatically change to off(2).	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.15`
modemAlrBufClear Setting this attribute to on, clears all the alarms in the buffer alarm of the modem. Upon completion, the value will automatically change to off(2).	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.16`
modemMaskSignaling Mask of Signals per modem. When a signal is masked, the agent will not send the modemSignalingChange TRAP, upon change of this signal's value and it will not enter the History…	column	OctetString	`.1.3.6.1.4.1.164.3.4.3.1.1.1.17`
modemPanelType The panel type of the modem. This parameter is applicable only for Far-End modems that are stand-alone or cards of another LRS-12. It enables displaying the correct panel of the…	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.18`
modemIType Is the modem Intelligent (ASMi-xx) ; or not - (ASM-xx). This object is used only for the Far-End modem (with the relevant modemIdx). notApplicable - for ASMi-32, ASMi-50 no - mo…	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.19`
modemType Modem type. xxxxxx - Stand-Alone modem. xxxxxxc - Modem on a Card within a Hub having an Agent. xxxxxxr - Modem on a Card within a Hub having no Agent. xxxxxxcd - Modem on a Doub…	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.2`
modemRcvPower The Rx Level of the modem, in dBm. Valid values: -99 .. 0. 255=not applicable.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.4.3.1.1.1.20`
modemSwVersion SW version of the modem, multiplied by 100. Example: 115 means SW ver: 1.15 0 = notApplicable.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.4.3.1.1.1.21`
modemLed LEDs status on the card . Each led will be represented by 4 bits where the first 2 bits (left) will specify the Status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and the next two bits …	column	OctetString	`.1.3.6.1.4.1.164.3.4.3.1.1.1.22`
modemRemoteType Remote modem card type. Not applicable to near - end modems. For LRS-52, sa(3)=saMaster.	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.23`
modemConfigPhantom Enables to supply electric power to remote devices (SA modem, repeaters), through the current module. off - remote devices will not get PS through the current modem. on - remot…	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.24`
modemRemoteTestEnable This parameter identifies if the remote Modem allowed to operates tests. For Near-End modems this parameter will be ON.	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.25`
modemSwVerString Display String of the modem SW version. Format: X. Y Z P 0..9 0..99 A,B,E 0..99 (Z+P are optional.) A=alpha, B=beta, E=end of development. Ex…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.164.3.4.3.1.1.1.26`
modemRemoteIdx 0 = notApplicable. For LRS: The Remote modem index. Applicable only for modemRemoteType=double(5) or quad(7). For DXC, LRS-52 and MP: - if Remote unit is an LRS Quad card:…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.4.3.1.1.1.27`
modemHwVerString Display String of the modem HW version.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.164.3.4.3.1.1.1.28`
modemResetStatistics In the on state all statistics counters (including E1 counters) are zeroed. Upon completion, the value will automatically change to off(2). notApplicable - for modems with no s…	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.29`
modemConfigMode The mode identifies if the Modem operates as the Master unit or as the Slave unit. For modems having a jumper for this function, this object will be RO. This object can be …	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.3`
modemMaxRate Maximum rate supported by the modem	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.30`
modemBoxMaterial Shape (picture) of modem box is related to box material. Applicable for ASMi52 SA	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.31`
modemLowSpeed This parameter enables working at low rates, when working with a serial interface (V.35,X.21) modem opposite to a E1/T1 interface modem.	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.32`
modemDevicePorts The value indicates the existence of optional ports (which are not Line or DTE). The value is a sum of 2**n, where n is a bit assigned to a certain port. For bit assignment see …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.4.3.1.1.1.33`
modemUserName This object allows the user to configure a name for the selected modem.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.164.3.4.3.1.1.1.34`
modemRowValidity This parameter defines whether this row is valid or not. It is an optional parameter.	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.35`
modemTftpCmd This parameter defines the TFTP Command. After performing the command, the Agent will automatically set this variable to noOp(1).	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.36`
modemModeTemporary This object specifies if the Modem operates as modemConfigMode value (Master/Slave) temporarily or permanently. This object can be Set only when: - modemConfigMode=maste…	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.4`
modemNoOfDte Number of DTE ports in the modem.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.4.3.1.1.1.5`
modemWire Modem wiring.	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.6`
modemMngLink Communication status between the pair of modems.	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.7`
modemReset When this object is set to the value of hwReset(3), the module performs HW Reset. When this object is set to the value of configReset(4), the modem performs Configuration Res…	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.8`
modemSlot A unique number to identify the slot position of the modem (card)in its Hub. notApplicable - for a stand-alone modem or Rack 214 card. io13..io15 - are for DXC u…	column	Enumeration	`.1.3.6.1.4.1.164.3.4.3.1.1.1.9`