sysCIntTsAllocMode
RAD-MIB ·
.1.3.6.1.4.1.164.3.3.1.6.2.1.6
Object
column
r/w
Enumeration
This object enables user to select the mode of Internal TS
Allocation.
static - user has to select for each Dynamic card port, the
Maximum TSs expected to be connected (including future
growth). This number will be allocated to the ports,
so that if number of connected TSs will grow within
the limits of this Maximum TS limit, no disruption
of data flow will occur for other ports.
dynamic- TS allocation is done dynamically according to the
connected TSs. No future reservations are done. This mode
may cause data disruption on other ports/slots if user
will want to change the number of connected TSs for a
Dynamic card port.
staticOneToOne - user has to select for each Dynamic card port, the
Maximum TSs expected to be connected (including future
growth). In addition, the TSs themselves cannot be higher
than this defined Maximum (e.g if Maximum TSs=5 user cannot
selects TSs higher than 5). This mode ensures that if number
of TSs grow within the limits of this Maximum TS limit, no
disruption of data flow will occur for other ports AND for
the selected port itself.
Default=static(2).
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.3.1.6.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sysCnfgEntry
- Table
- sysCnfgTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | off |
3 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysCnfgIdx This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.
For Gmux2000 the range limitation (1..255) was discarded
since the Id… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.1.6.2.1.1 |
| sysCBuRecMode Recovery Mode. This object determines if after recovery
of the Primary Link (used in Vmux) it will become on-line again or not:
auto - automatic. In this case, the failed Link wil… | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.2.1.10 |
| sysCMatrixMode Indicates the TS Matrix Mode:
bidirectional - TS Assignment Matrix is symmetric.
unidirectional - TS Assignment Matrix can be asymmetric.
notApplicable - for agents that do no… | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.2.1.2 |
| sysCIsdnFormat ISDN format. This parameter controls the operation mode of
the ISDN ports.
te - ISDN timing is derived from the signal received
from the equipment it is connected to.
nt - ti… | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.2.1.3 |
| sysCRoutingOnEth Mng Routing Protocol on the online CL Ethernet port,
or on device Ethernet port dedicated for mangement. | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.2.1.4 |
| sysCAutoConfigEnable This object enables user to enable/disable activating
the Auto Configuration. When Auto Configuration is activated,
the device learns its configuration Automatically from the Net … | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.2.1.5 |
| sysCBuPrimaryPort This object enables the user to configure a Backup mechanism.
If a backup mechanism exists, it is possible to configure the primary port.
The traffic will flow via the primary por… | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.2.1.7 |
| sysCEnableLanOverTdm This object enables/disables transferring traffic from the LAN port
to the TDM port. It is possible to enable only part of the traffic on the
TDM port for security reasons or in o… | column | Enumeration | .1.3.6.1.4.1.164.3.3.1.6.2.1.8 |
| sysCSs7FisuSuppression SS7 Suppresion is used for SS7 Spoofing.
The SS7 spoofing terminates the keep alive messages from the local VMUX
without sending them over the network, thus improving the bandwidt… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.1.6.2.1.9 |