alarmForwardingGroupConditions
RAD-MIB ·
.1.3.6.1.4.1.164.6.2.50.1.5
Object
This parameter is applicable when there is a group of interfaces in which a fault may occur, and one interface to which alarm is propagated (forwarded). 0 = All - Forwarding will take place only when all interfaces of the same group are faulty. 1 = Single - Forwarding will take place when at least one (single) interface of the same group (any of them) is faulty. n - forwarding will take place only when n (n < all) interfaces of the same group fail.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.6.2.50.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alarmForwardingEntry
- Table
- alarmForwardingTable
- Siblings
- 10
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmForwardingFailPort An Index of the port on which a fail occurs. | column | Integer32 | .1.3.6.1.4.1.164.6.2.50.1.1 |
| alarmForwardingDirection This parameter determines the Direction of the Alarm Forwarding.
unidirectional - alarmForwardingFailPort affects the
alarmForwardingToPort.
bidirectional - alar… | column | Enumeration | .1.3.6.1.4.1.164.6.2.50.1.10 |
| alarmForwardingAction Bit map representing the action to be performed when alarm forwarding will take place.
bit 0 - No Action.
'1' value - device should NOT perform any action, though other b… | column | Bits | .1.3.6.1.4.1.164.6.2.50.1.11 |
| alarmForwardingToPort An Index of the port that will be affected
upon the failure of the alarmForwardingFailPort. | column | Integer32 | .1.3.6.1.4.1.164.6.2.50.1.2 |
| alarmForwardingRowStatus Creation/ Deletion of rows in the table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.2.50.1.3 |
| alarmForwardingRecoveryTime This parameter defines the maximum time (sec)
the affected port will hold the down state. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.50.1.4 |
| alarmForwardingCause Bit map representing the cause upon which alarm forwarding will take place.
bit 0 - LOSS (LINE DOWN)
bit 1 - AIS
bit 2 - RDI
bit 3 - PROTOCOL DOWN.
bit 4 - OAM Signaling… | column | Bits | .1.3.6.1.4.1.164.6.2.50.1.6 |
| alarmForwardingRecoveryMode This parameter determines the Recovery Mode.
manual - The user should stop the alarm forwarding
by using the alarmForwardingRecoveryCommand.
automatic - Alarm forwarding will be… | column | Enumeration | .1.3.6.1.4.1.164.6.2.50.1.7 |
| alarmForwardingRecoveryCommand This parameter is a command. It is applicable when
alarmForwardingRecoveryMode = manual.
on - Will stop alarm forwarding.
After setting to 'On', the agent will set this paramete… | column | Enumeration | .1.3.6.1.4.1.164.6.2.50.1.8 |
| alarmForwardingDelay This parameter determines the period of time (in seconds) the
alarm of the alarmForwardingFailPort should exist before
starting alarm forwarding. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.50.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| lagCnfgIdx This object indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. | column | Unsigned32 | .1.3.6.1.4.1.164.6.2.54.1.1.1 |
| lagIdx This object indicates LAG unique index. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.54.1.1.2 |