prtSonetVcLoopStatus
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.10
Object
column
Enumeration
This variable indicates Loop Status.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.2.4.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtSonetVcStatEntry
- Table
- prtSonetVcStatTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtSonetVcRxJPathTrace Jy Path Trace value received from network.
y=1, 2:
J1 - for VC-4 layer
J2 - for VC-12 layer. | column | OctetString | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.1 |
| prtSonetVcLcasTxStateMachineStatus LCAS State machine status. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.11 |
| prtSonetVcLcasRxStateMachineStatus LCAS State machine status. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.12 |
| prtSonetVcMFLengthErrorCounter Counts the multi-frames that had wrong length (shorter or longer) | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.13 |
| prtSonetVcCntrlPktCRCErrorCounter Counts Number of Control Packet CRC errors | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.14 |
| prtSonetVcRxSignalLabel Signal Label received from network.
For VC-3:
The SONET standard defines the C2 byte as
the path signal label. The purpose of this byte is to
communicate the payload type being e… | column | OctetString | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.2 |
| prtSonetVcLcasSourceState Fixed - This is an indication that this end
uses fixed bandwidth (non-LCAS mode)
Add - This member is about to be added to the group
Norm - Norma… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.3 |
| prtSonetVcLcasSinkState Fixed - This is an indication that this end
uses fixed bandwidth (non-LCAS mode)
Add - This member is about to be added to the group
Norm - Norma… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.4 |
| prtSonetVcStatus This variable indicates the Status of the interface.
It contains failure state information.
The variable is a bit map represented as a sum, therefore, it
can represent multipl… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.5 |
| prtSonetVcRxSeqNumber This variable indeticates the LCAS Rx
sequence number of this VC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.6 |
| prtSonetVcTxSeqNumber This variable indicates the LCAS Tx sequence number of this VC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.7 |
| prtSonetVcMfiDiffDelay This variable indicates time difference (based on MFI field) from the
fastest channel (on which it will be 0), in miliSeconds units | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.8 |
| prtSonetVcLoMF This variable indicates loss of Multiframe defect. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.4.1.1.9 |