prtIsdnFilter
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.8
Object
column
r/w
Enumeration
This attribute allows the user to configure the port: answerAll(2): accept all incoming calls, rejectAll(3): reject all incoming calls, selective(4): accept or reject according directory table. callBack (5): In this mode the ISDN Ch will reject incoming calls and will initiate call back to the rejected phone number.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.16.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtIsdnCnfgEntry
- Table
- prtIsdnCnfgTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtIsdnCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.1 |
| prtIsdnNumOfAbstractTerm An object for KM2100/4 agents.
255=Not Applicable
When ISDN Standard = ETSI or NTT (European) the value should be 255 (NotApplicable)
else If ML speed is 64Kbps value should… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.10 |
| prtIsdnSwitchMode For KM2100.
auto - The call is initiated automatically by one of the IO cards connected
to KML.10(ISDN card) having ISDN Switch Mode.
manual - The call is initiated by … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.11 |
| prtIsdnAbSide This parameter indicates the QSIG side in layer 3.
This definition is from the QSIG Standard. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.12 |
| prtIsdnQsigRole This parameter indicates the QSIG side in layer 1 & 2. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.13 |
| prtIsdnInterface It indicates the interface type:
lt = line termination
nt = network termination
te = terminal equipment. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.14 |
| prtIsdnCallMode This object indicates the acceptance of incoming calls.
Initiate - Callout
Listen - Callin. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.15 |
| prtIsdnCallBackTimeout This object is applicable only if 'prtIsdnFilter' is 'CallBack'
and determines how long to wait from receiving the incoming call
until initiating the call back call.
The vaules ra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.16 |
| prtIsdnSltIdx This attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid
For KM2100/4 Valid entries are 'kmxMlA '… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.2 |
| prtIsdnPrtIdx This attribute indicates a unique port number.
For MAXcess the values will be:
exPrt1(1),
exPrt2(2),
exPrt3(3),
exPrt4(4),
For KM-2100 the port index is calculated as… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.3 |
| prtIsdnConnect This attribute indicates if the port is connected. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.4 |
| prtIsdnSignalingProtocol This attribute fixes which signaling protocol
is used at this port (D-Channel).
It is equivalent to isdnSignalingProtocol
in the isdn MIB. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.5 |
| prtIsdnBasicRateLineTopology This attribute is relevant for ISDN BRI only.
It is equivalent to isdnBasicRateLineTopology
in the isdn MIB. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.6 |
| prtIsdnMode This attribute allows the user to configure the port as
leased(2) in case of connection to a TDM network. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.7 |
| prtIsdnSimultaneousCall In case of simultaneous call (local,remote and remote,local):
accept(2): accept the incoming call,
reject(3): reject the incoming call. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.16.1.1.9 |