prtRRFlipAutoDisable
RAD-MIB ·
.1.3.6.1.4.1.164.1.2.4.1.1.9
Object
column
r/w
Enumeration
Attribute describing the control on the flipping mechanism of a lobe . Value ON indicates the ability of the lobe to auto disable itself when flipping occur. Value OFF indicates that the auto disable mechanism should not be activated and the lobe should stay in a flipping state. This attribute applies on selected lobes (tl-2/f, or tl-2/fsat)
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.1.2.4.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtRREntry
- Table
- prtRRTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtRRmdlID A unique identifier of the module,(slot no.),this port is attached to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.2.4.1.1.1 |
| prtRRSecurityMask2 Mask of the allowed MAC address that can be connected through
this port. The security of the individual port overwrites the
security of the segment where the port belongs to | column | MacAddress | .1.3.6.1.4.1.164.1.2.4.1.1.10 |
| prtRRSecurityPattern2 A six-octet(48 bit) pattern: where the masked bits of prtRRSecurityMask2
should match the MAC address. | column | MacAddress | .1.3.6.1.4.1.164.1.2.4.1.1.11 |
| prtRRMode Indicates the port status of rr-sat card after the communication
is broken. When configured to smart-port, the port disables itself
when there is no management communication with … | column | Enumeration | .1.3.6.1.4.1.164.1.2.4.1.1.12 |
| prtRRAttachment Indicates the type of the port attachment. Smart attachment types
are applicable for rr-sat card only | column | Enumeration | .1.3.6.1.4.1.164.1.2.4.1.1.13 |
| prtRRID A unique identifier of the port within its module. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.1.2.4.1.1.2 |
| prtRRSecurityState This entry indicates whether a security check can be performed on
the specific port. This value is directly related to the
presence of an inband module in the segment where the p… | column | Enumeration | .1.3.6.1.4.1.164.1.2.4.1.1.3 |
| prtRRSecurityEnable This value indicates whether a security check should be performed.
Setting this value to ON(3) will activate the security mechanism
if and only if, the value of prtRRSecurityStat… | column | Enumeration | .1.3.6.1.4.1.164.1.2.4.1.1.4 |
| prtRRSecurityMask Mask of the allowed MAC address that can be connected through
this port. The security of the individual port overwrites the
security of the segment where the port belongs to | column | MacAddress | .1.3.6.1.4.1.164.1.2.4.1.1.5 |
| prtRRSecurityPattern A six-octet(48 bit) pattern, where the masked bits of prtRRSecurityMask
should match the MAC address. | column | MacAddress | .1.3.6.1.4.1.164.1.2.4.1.1.6 |
| prtRRJitterAttenEnable The value of this attribute determines activation of the
jitters Attenuation mechanism of repeater's port . | column | Enumeration | .1.3.6.1.4.1.164.1.2.4.1.1.7 |
| prtRRConfigMsg Full configuration message coded in internal RAD application format.
This entry describes port' configuration. | column | OctetString | .1.3.6.1.4.1.164.1.2.4.1.1.8 |