prtGenCnfgBusConnection
RAD-MIB ·
.1.3.6.1.4.1.164.3.1.4.2.3.1.7
Object
column
r/w
Enumeration
This object indicates the support of the card regarding Bus Connection. Same value for all ports of the card. partial = 2 Buses (AB) full = 4 Buses (ABCD) partial CD = 2 Buses CD Actually the support depends on the card's HW. But, since CL has to assign data on Buses even when the card is not installed, this object has to be configured. If the actual card installed will not match the value configured, an Alarm will be issued.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.1.4.2.3.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtGenCnfgEntry
- Table
- prtGenCnfgTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notApplicable |
2 | unBlock |
3 | block |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtGenCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.
The write operation is valid only to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.1.4.2.3.1.1 |
| prtGenCnfgProtectionMode This object indicates the Protection Mode of the port.
notApplicable- when Bus Protection Point=No.
For VC-4/Omni card this object is supported RO. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.10 |
| prtGenCnfgConnect This object indicates whether the port should be considered in
any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.11 |
| prtGenCnfgSignalingType This object selects the Type of Signaling used by the port. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.12 |
| prtGenCnfgSltIdx This attribute indicates a unique slot position where
the card is inserted. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.2 |
| prtGenCnfgPrtIdx This attribute indicates a unique external or internal port number.
For MP:
exPrt1 (1) .. exPrt16 (16) ,
notApplicable(100),
inPrt1 (101) .. inPrt84 (184) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.4.2.3.1.3 |
| prtGenCnfgLinkToSlot This attribute indicates the slot of the ML card to which
the IO port is mapped. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.4 |
| prtGenCnfgLinkToPort This attribute indicates the port in the prtGenCnfgLinkToSlot of
the ML card to which the IO port is mapped.
For MP:
exPrt1 (1) ,
exPrt2 (2) ,
exPrt3 (3) ,
exPrt4 (4) … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.4.2.3.1.5 |
| prtGenCnfgPortId IO Port Id for V5.1 use.
This object is applicable only for part of the PSTN and ISDN IO ports.
Generally, 0 is a valid value.
Nevertheless, for ports that do not support t… | column | Integer32 | .1.3.6.1.4.1.164.3.1.4.2.3.1.6 |
| prtGenCnfgInbandMng This object indicates whether Inband Management is used over the
link. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.8 |
| prtGenCnfgInbandMngRoutProt This object indicates the Inband Mng Routing Protocol of
the port. | column | Enumeration | .1.3.6.1.4.1.164.3.1.4.2.3.1.9 |