prtExHsfClkPolarity
RAD-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.6.1.12
Object
column
r/w
Enumeration
This object indicates the clock polarity. For FCD-M this object will be applicable only for the fixed HS port (the fixed port on the device).
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.6.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtHsfCnfgEntry
- Table
- prtHsfCnfgTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtHsfCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relate to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.6.1.1 |
| prtExHsfOperMode This object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx)
unidirectRx = unidirectional Rx.
broadcast = Tx upon request.
bidirBcastRing = Bidirectional … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.10 |
| prtExHsfInbandLoopback This object indicates if Inband Loopback from the Network
should be enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.11 |
| prtExHsfControlSignal This object indicates the Control Signal according to G.797 ITU-T standard.
For FCD-M this object will be applicable for the fixed HS port
(the fixed port on the device) and HS-Q/… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.13 |
| prtExHsfBcastRingSrcPort This object is applicable only when prtExHsfOperMode=
bidirBcastRing. In this case, the values mean:
- none - this port will be connected to ML in TSA as usual.
- exPrt1.. exPrtX… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.14 |
| prtHsfSltIdx This attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.2 |
| prtHsfPrtIdx This attribute indicates a unique external port index.
Hs2 has only two ports (exPrt1,exPrt2).
Hs3 has three ports (exPrt1,exPrt2,exPrt3).
Hsq and hsqN has four ports.
Hs6 has si… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.3 |
| prtExHsfConnect This attribute indicates whether the port should be
considered in any of the mux algorithms. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.4 |
| prtExHsfRate This attribute indicates the port speed. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.5 |
| prtExHsfClkMode This attribute indicates a unique port operation clock mode. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.6 |
| prtExHsfCts This attribute indicates a unique CTS control line
operation mode. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.7 |
| prtExHsfFifoSize Size in bits. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.8 |
| prtExHsfLinkTo deprecated This attribute indicates a slot of Main Link module, that the
port is linked to. This object is the same for all the
ports in the specific card because of HW limitations.
STATUS … | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.6.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtExPVc4CnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.1 |
| prtExPVc4SltIdx This attribute indicates a unique slot position where
the card is inserted. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.2 |
| prtExPVc4PrtIdx This object indicates the port number in the selected card
(slot). | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.9.1.1.3 |