pktSwchChannelOptionsS

RAD-MIB · .1.3.6.1.4.1.164.8.2.2.1.1.16
MIB view Table view

Object

column r/w Integer32 
This controls the use of gneral non-correlated channel options.
The value is a sum of values (powers of two), where each value in
the sum represents an option.
The values that may be included in the sum and their meanings are:
	0   No options
	1   HW signal is checked
	2   Auto call after clear
	4   Auto call after <CR>
	8   DCD is ON, only in DATA TRANSFER mode
	16  Charging Info Facility
	32  Auto call if HW signal is set
                     64  Accept calls even  if HW signal is  is OFF
                    128 A transparent channel.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.8.2.2.1.1.16
Type
column
Access
readwrite
Status
current
Parent
pktSwchChannelSEntry
Table
pktSwchChannelSTable
Siblings
19

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pktSwchChannelIfIndexS
This is used as the index for the channel table.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.1.1.1
pktSwchChannelAutocallIntervalS
The interval in seconds between consecutive autocall retries.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.10
pktSwchChannelCallAliasS
The alias to be sent after the call is set up. A value of zero indicates that alias sending is disabled. The aliases are configured on the Alias Table.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.11
pktSwchChannelSubAddress1S
The first subaddress for the channel.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.12
pktSwchChannelSubAddress2S
The second subaddress for the channel.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.13
pktSwchChannelNUISEntry
The number corresponding to the NUI information to be sent. This number is the same as the pktSwchNuiGroupId.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.14
pktSwchChannelClearTimerS
Time limitation for an open session. A value of zero indicates that the Clear timer is not used.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.15
pktSwchChannelClear
The Clearing Channel operation disconnects all sessions
columnEnumeration.1.3.6.1.4.1.164.8.2.2.1.1.17
pktSwchChannelCopyTo
The destination channel number, to which the Copy is performed.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.1.1.18
pktSwchChannelCopyToWMask
The destination channel number, to which the Copy with Mask is performed.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.8.2.2.1.1.19
pktSwchChannelNumberS
The number by which a channel is identified.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.2
pktSwchChannelCopyMask
The selected configuration parameters to be copied from the source channel to the target channels. The value is a sum of values (powers of two), where each value in the sum repres…
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.20
pktSwchChannelProfileS
The profile that the channel uses for command mode operations.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.3
pktSwchChannelOutCallProfileS
The number of the profile that will be used during an outgoing call on the channel.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.4
pktSwchChannelInCallProfileS
The number of the profile that will be used during an incoming call on the channel.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.5
pktSwchChannelRemoteProfileS
The number of the profile that will be downloaded to the remote PAD at the beginning of a new call.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.6
pktSwchChannelAutocallIdS
Selects the mnemonic (call ID) to be used as the first alternative. A value of zero indicates that the autocall function is disabled.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.7
pktSwchChannelAlterAutocallIdS
Selects the alternate mnemonic for the autocall function. A value of zero indicates that the alternate destination is not used.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.8
pktSwchChannelAutocallRetriesS
The number of autocall retries if the autocall setup request is rejected with a busy cause.
columnInteger32.1.3.6.1.4.1.164.8.2.2.1.1.9