PowerNet-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
369
Rows
369
Columns
2,817
.1.3.6.1.4.1.318.1.1.1.2.2.12
·
1 row entry
·
3 columns
A list of battery table entries. The number of battery frames present in UPS.
Information applicable to
each of the Battery frames.
each of the Battery frames.
Indexes
upsAdvBatteryActualVoltageTableIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsAdvBatteryActualVoltageTableIndex
mandatory
The Battery Frame identifier. Battery Frame index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.2.12.1.1 |
||||
|
upsAdvBatteryActualVoltagePolarity
mandatory
The selected Battery Voltage Polarity.
0 indicates positive polarity. 1 indicates negative polarity. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.2.12.1.2 |
||||
|
upsAdvBatteryFrameActualVoltage
mandatory
The actual battery bus voltage in Volts.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.2.12.1.3 |
.1.3.6.1.4.1.318.1.1.1.2.2.13
·
1 row entry
·
3 columns
A list of Battery Frame table entries. The number of entries is given by the value of Number of Battery Frames.
An entry containing information applicable to a
particular Battery Frame.
particular Battery Frame.
Indexes
upsAdvTotalDCCurrentTableIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsAdvTotalDCCurrentTableIndex
mandatory
The Battery Frame identifier. Total DC Current
Table Index. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.2.13.1.1 |
||||
|
upsAdvTotalDCCurrentPolarity
mandatory
The selected Battery Current Polarity.
0 indicates positive polarity. 1 indicates negative polarity. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.2.13.1.2 |
||||
|
upsAdvTotalFrameDCCurrent
mandatory
The Total DC Current of battery in Amperes.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.2.13.1.3 |
.1.3.6.1.4.1.318.1.1.1.2.2.14
·
1 row entry
·
4 columns
A list of Battery Frame table entries. The number of entries is given by number of Battery frames present.
An entry containing information applicable to a
particular battery frame.
particular battery frame.
Indexes
upsAdvBatteryCurrentTableIndex upsAdvBatteryCurrentIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsAdvBatteryCurrentTableIndex
mandatory
The Battery Frame identifier. Battery Current
Table Index. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.2.14.1.1 |
||||
|
upsAdvBatteryCurrentIndex
mandatory
The battery frame identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.2.14.1.2 |
||||
|
upsAdvBatteryCurrentPolarity
mandatory
The selected Battery current polarity.
0 indicates positive polarity. 1 indicates negative polarity |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.2.14.1.3 |
||||
|
upsAdvBatteryFrameCurrent
mandatory
The Battery current measured in Amperes
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.2.14.1.4 |
.1.3.6.1.4.1.318.1.1.1.2.3.7
·
1 row entry
·
3 columns
A list of Battery frame table entries. The number of entries is given by the number of Battery frames.
An entry containing information applicable to a
particular battery frame.
particular battery frame.
Indexes
upsHighPrecBatteryActualVoltageTableIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsHighPrecBatteryActualVoltageTableIndex
mandatory
The Battery Frame identifier. High Precision
Actual Voltage Table Index. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.7.1.1 |
||||
|
upsHighPrecBatteryActualVoltagePolarity
mandatory
The selected Battery Voltage polarity.
0 indicates positive polarity. 1 indicates negative polarity. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.3.7.1.2 |
||||
|
upsHighPrecBatteryVoltage
mandatory
The actual battery bus voltage expressed as tenths of Volts.
If not supported, return -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.7.1.3 |
.1.3.6.1.4.1.318.1.1.1.2.3.8
·
1 row entry
·
3 columns
A list of Battery Frame table entries. The number of entries is given by the number of battery frames.
An entry containing information applicable to a
particular battery frame.
particular battery frame.
Indexes
upsHighPrecTotalDCCurrentTableIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsHighPrecTotalDCCurrentTableIndex
mandatory
The Battery Frame identifier.
High precision Total DC Current index. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.8.1.1 |
||||
|
upsHighPrecTotalDCCurrentPolarity
mandatory
The selected Battery Current polarity.
0 indicates positive polarity. 1 indicates negative polarity. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.3.8.1.2 |
||||
|
upsHighPrecTotalDCFrameCurrent
mandatory
The total DC current in tenths of Amperes.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.8.1.3 |
.1.3.6.1.4.1.318.1.1.1.2.3.9
·
1 row entry
·
4 columns
A list of Battery Frame table entries. The number of entries is given by the number of battery frames.
An entry containing information applicable to a
particular battery frame.
particular battery frame.
Indexes
upsHighPrecBatteryCurrentTableIndex upsHighPrecBatteryCurrentIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsHighPrecBatteryCurrentTableIndex
mandatory
The Battery frame identifier.
Battery Frame index. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.9.1.1 |
||||
|
upsHighPrecBatteryCurrentIndex
mandatory
The Battery frame identifier.
Battery Index for each frame. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.9.1.2 |
||||
|
upsHighPrecBatteryCurrentPolarity
mandatory
The selected Battery Current polarity.
0 indicates positive polarity. 1 indicates negative polarity. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.3.9.1.3 |
||||
|
upsHighPrecBatteryFrameCurrent
mandatory
The Battery current in tenths of Amperes.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.9.1.4 |
.1.3.6.1.4.1.318.1.1.1.2.3.10.2
·
1 row entry
·
10 columns
A list of Battery Pack table entries. The number of entries is given by number of Battery Packs present.
An entry containing information applicable to a
particular battery pack.
particular battery pack.
Indexes
upsHighPrecBatteryPackIndex upsHighPrecBatteryCartridgeIndex
| Column | Syntax | OID |
|---|---|---|
|
upsHighPrecBatteryPackIndex
mandatory
The battery pack identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.1 |
|
upsHighPrecBatteryCartridgeIndex
mandatory
The battery cartridge identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.2 |
|
upsHighPrecBatteryPackFirmwareRevision
mandatory
The battery pack firmware revision.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.3 |
|
upsHighPrecBatteryPackSerialNumber
mandatory
The battery pack serial number.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.4 |
|
upsHighPrecBatteryPackTemperature
mandatory
The battery pack temperature measured in 10ths of degree Celcius
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.5 |
|
upsHighPrecBatteryPackStatus
mandatory
The battery status for the pack only.
bit 0 Disconnected bit 1 Overvoltage bit 2 NeedsReplacement bit 3 OvertemperatureCritical bit 4 Charger bit 5 TemperatureSensor bit 6 BusSoftStart bit 7 OvertemperatureWarning bit 8… |
OctetString | .1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.6 |
|
upsHighPrecBatteryPackCartridgeHealth
mandatory
The battery cartridge health.
bit 0 Battery lifetime okay bit 1 Battery lifetime near end, order replacement cartridge bit 2 Battery lifetime exceeded, replace battery bit 3 Battery lifetime near end acknowledged, order… |
OctetString | .1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.7 |
|
upsHighPrecBatteryPackCartridgeReplaceDate
mandatory
The battery cartridge estimated battery replace date.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.8 |
|
upsHighPrecBatteryPackCartridgeInstallDate
mandatory
The battery cartridge install date.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.9 |
|
upsHighPrecBatteryPackCartridgeStatus
mandatory
The battery cartridge status.
bit 0 Disconnected bit 1 Overvoltage bit 2 NeedsReplacement bit 3 OvertemperatureCritical bit 4 Charger bit 5 TemperatureSensor bit 6 BusSoftStart bit 7 OvertemperatureWarning bit 8 General… |
OctetString | .1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.10 |
.1.3.6.1.4.1.318.1.1.1.2.3.10.4
·
1 row entry
·
10 columns
A list of Battery Pack table entries. The number of entries is given by number of Battery Packs present.
An entry containing information applicable to a
particular battery pack.
particular battery pack.
Indexes
upsHighPrecBatteryPackOnlyIndex
| Column | Syntax | OID |
|---|---|---|
|
upsHighPrecBatteryPackOnlyIndex
mandatory
The battery pack identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.1 |
|
upsHighPrecBatteryPackOnlyFirmwareRevision
mandatory
The battery pack firmware revision.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.2 |
|
upsHighPrecBatteryPackOnlySerialNumber
mandatory
The battery pack serial number.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.3 |
|
upsHighPrecBatteryPackOnlyTemperature
mandatory
The battery pack temperature measured in 10ths of degree Celcius
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.4 |
|
upsHighPrecBatteryPackOnlyStatus
mandatory
The battery status for the pack only.
bit 0 Disconnected bit 1 Overvoltage bit 2 NeedsReplacement bit 3 OvertemperatureCritical bit 4 Charger bit 5 TemperatureSensor bit 6 BusSoftStart bit 7 OvertemperatureWarning bit 8… |
OctetString | .1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.5 |
|
upsHighPrecBatteryPackOnlyHealth
mandatory
The battery pack health.
bit 0 Battery lifetime okay bit 1 Battery lifetime near end, order replacement pack bit 2 Battery lifetime exceeded, replace battery bit 3 Battery lifetime near end acknowledged, order replaceme… |
OctetString | .1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.6 |
|
upsHighPrecBatteryPackOnlyReplaceDate
mandatory
The battery pack estimated battery replace date.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.7 |
|
upsHighPrecBatteryPackOnlyInstallDate
mandatory
The battery pack install date.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.8 |
|
upsHighPrecBatteryPackOnlyManufactureDate
mandatory
The battery pack manufacture date.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.9 |
|
upsHighPrecBatteryPackOnlySKU
mandatory
The battery pack SKU.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.3.10.4.1.10 |
.1.3.6.1.4.1.318.1.1.1.2.5
·
1 row entry
·
16 columns
Table of battery cabinets
An entry containing information applicable to a
particular battery cabinet.
particular battery cabinet.
Indexes
upsBatteryCabinetIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
upsBatteryCabinetIndex
optional
The Battery Cabinet identifier. Battery Cabinet
Table Index. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.1 |
||||||||
|
upsBatteryCabinetLocalIndex
optional
The identification number for the actual battery cabinet in the system.
0 corresponds to the internal batteries 1 and higher corresponds to external battery cabinets |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.2 |
||||||||
|
upsBatteryCabinetWiringConfiguration
optional
The value indicates the wiring configuration, whether the battery is 2-wire or 3-wire.
If it's a 3-wire battery system, the system can have two voltages and currents per cabinet. 1 = 2-wire (a non-split battery) 2 = 3-w… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.5.1.3 |
||||||||
|
upsBatteryCabinetVoltagePolarity1
optional
The battery voltage. For a non-split battery, it is the full voltage.
For a split battery, the value is the voltage for one side/half of the battery |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.4 |
||||||||
|
upsBatteryCabinetVoltagePolarity2
optional
The voltage for the second side/half of the battery in a split battery system.
If it is not a split battery, this reports -1 |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.5 |
||||||||
|
upsBatteryCabinetCurrentPolarity1
optional
The battery current. For a non-split battery, it is the full current.
For a split battery, the value is the current for one side/half of the battery |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.6 |
||||||||
|
upsBatteryCabinetCurrentPolarity2
optional
The current for the second side/half of the battery in a split battery system.
If it is not a split battery, this reports -1 |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.7 |
||||||||
|
upsBatteryCabinetTemperature
optional
The measured temperature of the battery cabinet in tenths of degrees Celcius
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.8 |
||||||||
|
upsBatteryCabinetMaxTemperature
optional
The highest temperature measured for the battery in the battery cabinet in tenths of degrees Celcius.
If there are multiple sensors in the battery cabinet, it is the selected highest actual value of measured temperature… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.9 |
||||||||
|
upsBatteryCabinetMinTemperature
optional
The lowest temperature measured for the battery in the battery cabinet in tenths of degrees Celcius.
If there are multiple sensors in the battery cabinet, it is the selected lowest actual value of measured temperatures.… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.10 |
||||||||
|
upsBatteryCabinetAverageTemperature
optional
The average temperature for all the battery sensors in the battery cabinet and
for the battery strings, if battery strings are present. Measured in tenths of degrees Celcius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.11 |
||||||||
|
upsBatteryCabinetFuse
optional
If the battery cabinet has a common fuse, the status is given by this value.
1 = Fuse open 2 = Fuse OK 3 = Not present |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.5.1.12 |
||||||||
|
upsBatteryCabinetBreaker
optional
The value indicates the battery cabinet breaker status. Reports 1 if no breaker is present.
1 = No breaker 2 = Unknown 3 = Breaker open 4 = Breaker closed |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.5.1.13 |
||||||||
|
upsBatteryCabinetNumberOfStrings
optional
The number of battery strings in the battery cabinet. The value can be 0,
meaning that no additional information on the battery string is available. 1 and higher means data in the table is provided. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.14 |
||||||||
|
upsBatteryCabinetNumberOfVerticalPositions
optional
The number of vertical levels or shelves for battery blocks/modules.
The levels are indexed from the bottom up |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.15 |
||||||||
|
upsBatteryCabinetNumberOfHorizontalPositions
optional
The number of horizontal positions for battery blocks/modules.
The levels are indexed from left to right |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.5.1.16 |
.1.3.6.1.4.1.318.1.1.1.2.6
·
1 row entry
·
9 columns
Table of battery strings in the complete battery solution
An entry containing information applicable to a particular battery string
in the battery cabinet.
in the battery cabinet.
Indexes
upsBatteryCabStringIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
upsBatteryCabStringIndex
optional
The battery cabinet string identifier. Battery cabinet string or halfstring
table index. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.6.1.1 |
||||||
|
upsBatteryCabStringCabReference
optional
Reference to the global battery cabinet index where the battery string is placed.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.6.1.2 |
||||||
|
upsBatteryCabStringLocalIndex
optional
Local battery string identification index in the actual battery cabinet (e.g. String 2 in cabinet)
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.6.1.3 |
||||||
|
upsBatteryCabStringCurrent
optional
The current in a battery string or battery halfstring, in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.6.1.4 |
||||||
|
upsBatteryCabStringAverageTemperature
optional
Temperature of the battery string or the average of the aggregated temperature of each
battery block/module (in tenths of degrees Celcius). If not available, this variable is set to (-1999). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.6.1.5 |
||||||
|
upsBatteryCabStringMaxTemperature
optional
The actual highest battery temperature measurement for the battery blocks/modules (in tenths of degrees Celcius).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.6.1.6 |
||||||
|
upsBatteryCabStringMinTemperature
optional
The actual lowest battery temperature measurement for the battery blocks/modules (in tenths of degrees Celcius).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.6.1.7 |
||||||
|
upsBatteryCabStringFuseStatus
optional
If the battery string has a common fuse, the status is given by this value.
1 = Fuse open 2 = Fuse OK 3 = Not present |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.6.1.8 |
||||||
|
upsBatteryCabStringNumberOfBlocks
optional
The number of battery blocks/modules in a battery string.
Can be 0, if no data is available in the table of individual battery blocks/cartridges |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.6.1.9 |
.1.3.6.1.4.1.318.1.1.1.2.7
·
1 row entry
·
11 columns
Table of battery blocks/modules in the complete battery solution.
An entry containing information applicable to a particular battery block
in the battery cabinet.
in the battery cabinet.
Indexes
upsBatteryCabBlockIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
upsBatteryCabBlockIndex
optional
The battery cabinet block identifier. Global battery cabinet block
table index. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.7.1.1 |
||||||
|
upsBatteryCabBlockStringReference
optional
Reference to the specific global battery string index
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.7.1.2 |
||||||
|
upsBatteryCabBlockLocalIndex
optional
Local battery block/module identification index in the actual battery string (e.g. Battery block 3 in the battery string)
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.7.1.3 |
||||||
|
upsBatteryCabBlockPresent
optional
Value indicates if battery block/module is present in the system.
Typically battery modules are removable and battery blocks are static. Reports notAvailable(3) if data is not available |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.7.1.4 |
||||||
|
upsBatteryCabBlockType
optional
Text string value, showing the vendor and model of the battery in the battery block/module
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.2.7.1.5 |
||||||
|
upsBatteryCabBlockTemperature
optional
The temperature for the battery block/module in tenths of degrees Celcius.
If multiple sensors are available it is the highest temperature in the battery block/module |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.7.1.6 |
||||||
|
upsBatteryCabBlockFuseStatus
optional
If the battery module has a fuse, the status is given by this value.
1 = Fuse open 2 = Fuse OK 3 = Not present |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.2.7.1.7 |
||||||
|
upsBatteryCabBlockVoltage
optional
The voltage of the battery block/module
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.7.1.8 |
||||||
|
upsBatteryCabBlockNumberOfCells
optional
The number of cells in the battery block/module
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.7.1.9 |
||||||
|
upsBatteryCabBlockVerticalPosition
optional
The vertical position of the battery block/module in the actual battery cabinet
(e.g. 4, if it is the 4th shelf counting from the bottom) |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.7.1.10 |
||||||
|
upsBatteryCabBlockHorizontalPosition
optional
The horizontal position of the battery block/module in the actual battery cabinet
(e.g. 3, if it is the 3rd position counting from the left) |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.7.1.11 |
.1.3.6.1.4.1.318.1.1.1.2.8
·
1 row entry
·
5 columns
Table of battery cells in a battery block/module in the complete battery solution
An entry containing information applicable to a particular battery cell
inside the battery block.
inside the battery block.
Indexes
upsBatteryCabBlockCellIndex
| Column | Syntax | OID |
|---|---|---|
|
upsBatteryCabBlockCellIndex
optional
The battery block cell identifier. Global battery block cell
table index. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.8.1.1 |
|
upsBatteryCabBlockCellReference
optional
Reference to the specific global battery block/module index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.8.1.2 |
|
upsBatteryCabBlockCellLocalIndex
optional
Local battery block/module identification index in the actual battery block (e.g. battery cell 5 in the battery block)
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.8.1.3 |
|
upsBatteryCabBlockCellVoltage
optional
The measured battery cell voltage
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.8.1.4 |
|
upsBatteryCabBlockCellTemperature
optional
The temperature for the battery cell in tenths of degrees Celcius.
If there is not a temperature sensor for each battery cell, then report -1 for those, which are not present. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.2.8.1.5 |
.1.3.6.1.4.1.318.1.1.1.3.2.10
·
1 row entry
·
7 columns
A list of input table entries. The number of entries is given by the value of upsPhaseNumInputs.
An entry containing information applicable to a
particular input.
particular input.
Indexes
upsAdvInputStatisticsIndex
| Column | Syntax | OID |
|---|---|---|
|
upsAdvInputStatisticsIndex
mandatory
The input identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.3.2.10.1.1 |
|
upsAdvInputApparentPower
mandatory
The input apparent power(sum of all of the three phases) measured in kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.3.2.10.1.2 |
|
upsAdvInputVoltageTHD
mandatory
The input voltage Total Harmonic Distortion in percent.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.3.2.10.1.3 |
|
upsAdvInputBypassVoltageTHD
mandatory
The bypass input voltage Total Harmonic Distortion in percent.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.3.2.10.1.4 |
|
upsAdvInputPeakCurrent
mandatory
The input peak current in Amperes.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.3.2.10.1.5 |
|
upsAdvInputBypassPeakCurrent
mandatory
The bypass input peak current in Amperes.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.3.2.10.1.6 |
|
upsAdvInputActivePower
mandatory
The input active power measured in kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.3.2.10.1.7 |
.1.3.6.1.4.1.318.1.1.1.4.2.10
·
1 row entry
·
4 columns
A list of input table entries. The number of entries is given by the value of upsPhaseNumOutputs.
An entry containing information applicable to a
particular output.
particular output.
Indexes
upsAdvOutputStatisticsIndex
| Column | Syntax | OID |
|---|---|---|
|
upsAdvOutputStatisticsIndex
mandatory
The output identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.4.2.10.1.1 |
|
upsAdvOutputPeakCurrent
mandatory
The output peak current in Amperes.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.4.2.10.1.2 |
|
upsAdvOutputCurrentTHD
mandatory
The output current Total Harmonic Distortion in percent.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.4.2.10.1.3 |
|
upsAdvOutputCrestFactor
mandatory
The output current crest factor expressed in tenths.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.4.2.10.1.4 |
.1.3.6.1.4.1.318.1.1.1.5.1.2
·
1 row entry
·
4 columns
A list of devices that are plugged into the UPS. The number of entries is given by the value of upsBasicConfigNumDevices.
The devices plugged in to the UPS.
Indexes
deviceIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
deviceIndex
mandatory
The index of the device that is plugged into the UPS.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.5.1.2.1.1 |
||||
|
deviceName
mandatory
The name/description of the device plugged into the UPS.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.5.1.2.1.2 |
||||
|
vaRating
mandatory
The volt-amp rating of the device plugged into the UPS.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.5.1.2.1.3 |
||||
|
acceptThisDevice
mandatory
An entry is added if yes, the entry is deleted if no.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.5.1.2.1.4 |
.1.3.6.1.4.1.318.1.1.1.5.2.13
·
1 row entry
·
2 columns
Current settings of UPS dip switches.
The current setting of one dip switch.
Indexes
dipSwitchIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dipSwitchIndex
mandatory
The index of a UPS dip switch.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.5.2.13.1.1 |
||||
|
dipSwitchStatus
mandatory
The setting of a UPS dip switch.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.5.2.13.1.2 |
.1.3.6.1.4.1.318.1.1.1.5.2.16
·
1 row entry
·
3 columns
The table listing the allowed values for all discrete configurable UPS variables.
The table entry for a configurable UPS variable.
Indexes
apcUpsConfigFieldIndex
| Column | Syntax | OID |
|---|---|---|
|
apcUpsConfigFieldIndex
mandatory
The index to an eeprom field entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.5.2.16.1.1 |
|
apcUpsConfigFieldOID
mandatory
The OID of the current configurable value.
|
ObjectIdentifier | .1.3.6.1.4.1.318.1.1.1.5.2.16.1.2 |
|
apcUpsConfigFieldValueRange
mandatory
The discrete set of allowed values of a configurable
register. Individual values are delimited by a comma. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.5.2.16.1.3 |
.1.3.6.1.4.1.318.1.1.1.9.2.2
·
1 row entry
·
6 columns
A list of input table entries. The number of entries is given by the value of upsPhaseNumInputs.
An entry containing information applicable to a
particular input.
particular input.
Indexes
upsPhaseInputTableIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsPhaseInputTableIndex
mandatory
The input identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.2.1.1 |
||||||||||
|
upsPhaseNumInputPhases
mandatory
The number of input phases utilized in this
device. The sum of all the upsPhaseNumInputPhases variable indicates the number of rows in the input phase table. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.2.1.2 |
||||||||||
|
upsPhaseInputVoltageOrientation
mandatory
The input voltage orientation:
1: unknown for this UPS 2: singlePhase - phase 1 voltage is between Phase 1 and Neutral. 3: splitPhase - phase 1 voltage is between Phase 1 and Neutral; phase 2 voltage is between Phase 2 … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.9.2.2.1.3 |
||||||||||
|
upsPhaseInputFrequency
mandatory
The input frequency in 0.1 Hertz, or -1 if it's unsupported
by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.2.1.4 |
||||||||||
|
upsPhaseInputType
mandatory
The input type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.9.2.2.1.5 |
||||||||||
|
upsPhaseInputName
mandatory
A name given to a particular input.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.9.2.2.1.6 |
.1.3.6.1.4.1.318.1.1.1.9.2.3
·
1 row entry
·
14 columns
A list of input table entries. The number of entries is given by the sum of the upsPhaseNumInputPhases.
An entry containing information applicable to a
particular input phase.
particular input phase.
Indexes
upsPhaseInputPhaseTableIndex upsPhaseInputPhaseIndex
| Column | Syntax | OID |
|---|---|---|
|
upsPhaseInputPhaseTableIndex
mandatory
The input identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.1 |
|
upsPhaseInputPhaseIndex
mandatory
The input phase identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.2 |
|
upsPhaseInputVoltage
mandatory
The input voltage in VAC, or -1 if it's unsupported
by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.3 |
|
upsPhaseInputMaxVoltage
mandatory
The maximum input voltage in VAC measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.4 |
|
upsPhaseInputMinVoltage
mandatory
The minimum input voltage in VAC measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.5 |
|
upsPhaseInputCurrent
mandatory
The input current in 0.1 amperes, or -1 if it's
unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.6 |
|
upsPhaseInputMaxCurrent
mandatory
The maximum input current in 0.1 amperes measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.7 |
|
upsPhaseInputMinCurrent
mandatory
The minimum input current in 0.1 amperes measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.8 |
|
upsPhaseInputPower
mandatory
The input power in Watts, or -1 if it's unsupported
by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.9 |
|
upsPhaseInputMaxPower
mandatory
The maximum input power in Watts measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.10 |
|
upsPhaseInputMinPower
mandatory
The minimum input power in Watts measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.11 |
|
upsPhaseInputApparentPower
mandatory
The input apparent power of the UPS in kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.12 |
|
upsPhaseInputPowerFactor
mandatory
The input power factor measured in hundredth.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.13 |
|
upsPhaseInputVoltagePN
mandatory
The input voltage measured across Phase to Neutral in VAC, or -1 if it's unsupported
by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.2.3.1.14 |
.1.3.6.1.4.1.318.1.1.1.9.3.2
·
1 row entry
·
4 columns
A list of output table entries. The number of entries is given by the value of upsOutputNumPhases.
An entry containing information applicable to a
particular output.
particular output.
Indexes
upsPhaseOutputTableIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsPhaseOutputTableIndex
mandatory
The output identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.2.1.1 |
||||||||||
|
upsPhaseNumOutputPhases
mandatory
The number of output phases utilized in this
device. The sum of all the upsPhaseNumOutputPhases variable indicates the number of rows in the output phase table. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.2.1.2 |
||||||||||
|
upsPhaseOutputVoltageOrientation
mandatory
The output voltage orientation:
1: unknown for this UPS 2: singlePhase - phase 1 voltage is between Phase 1 and Neutral. 3: splitPhase - phase 1 voltage is between Phase 1 and Neutral; phase 2 voltage is between Phase 2… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.9.3.2.1.3 |
||||||||||
|
upsPhaseOutputFrequency
mandatory
The output frequency in 0.1 Hertz, or -1 if it's
unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.2.1.4 |
.1.3.6.1.4.1.318.1.1.1.9.3.3
·
1 row entry
·
23 columns
A list of output table entries. The number of entries is given by the sum of the upsPhaseNumOutputPhases.
An entry containing information applicable to a
particular output phase.
particular output phase.
Indexes
upsPhaseOutputPhaseTableIndex upsPhaseOutputPhaseIndex
| Column | Syntax | OID |
|---|---|---|
|
upsPhaseOutputPhaseTableIndex
mandatory
The output identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.1 |
|
upsPhaseOutputPhaseIndex
mandatory
The output phase identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.2 |
|
upsPhaseOutputVoltage
mandatory
The output voltage in VAC, or -1 if it's unsupported
by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.3 |
|
upsPhaseOutputCurrent
mandatory
The output current in 0.1 amperes drawn
by the load on the UPS, or -1 if it's unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.4 |
|
upsPhaseOutputMaxCurrent
mandatory
The maximum output current in 0.1 amperes measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.5 |
|
upsPhaseOutputMinCurrent
mandatory
The minimum output current in 0.1 amperes measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.6 |
|
upsPhaseOutputLoad
mandatory
The output load in VA, or -1 if it's unsupported
by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.7 |
|
upsPhaseOutputMaxLoad
mandatory
The maximum output load in VA measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.8 |
|
upsPhaseOutputMinLoad
mandatory
The minimum output load in VA measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.9 |
|
upsPhaseOutputPercentLoad
mandatory
The percentage of the UPS load capacity in VA at
redundancy @ (n + x) presently being used on this output phase, or -1 if it's unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.10 |
|
upsPhaseOutputMaxPercentLoad
mandatory
The maximum percentage of the UPS load capacity in
VA measured at redundancy @ (n + x) presently being used on this output phase since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. S… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.11 |
|
upsPhaseOutputMinPercentLoad
mandatory
The minimum percentage of the UPS load capacity in
VA measured at redundancy @ (n + x) presently being used on this output phase since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. S… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.12 |
|
upsPhaseOutputPower
mandatory
The output power in Watts, or -1 if it's
unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.13 |
|
upsPhaseOutputMaxPower
mandatory
The maximum output power in Watts measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.14 |
|
upsPhaseOutputMinPower
mandatory
The minimum output power in Watts measured
since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UPS. Sampled every 30 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.15 |
|
upsPhaseOutputPercentPower
mandatory
The percentage of the UPS power capacity in Watts at
redundancy @ (n + x) presently being used on this output phase, or -1 if it's unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.16 |
|
upsPhaseOutputMaxPercentPower
mandatory
The maximum percentage of the UPS power capacity
in Watts measured at redundancy @ (n + x) presently being used on this output phase since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UP… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.17 |
|
upsPhaseOutputMinPercentPower
mandatory
The maximum percentage of the UPS power capacity
in Watts measured at redundancy @ (n + x) presently being used on this output phase since the last reset (upsPhaseResetMaxMinValues), or -1 if it's unsupported by this UP… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.18 |
|
upsPhaseOutputPowerFactor
mandatory
The Output power factor of the UPS in hundredth.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.19 |
|
upsPhaseOutputApparentPower
mandatory
Apparent power in kVA
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.20 |
|
upsPhaseOutputInverterVoltage
mandatory
Output voltage in VAC measured at the output of inverter.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.21 |
|
upsPhaseOutputVoltagePN
mandatory
The output voltage measured across Phase to Neutral in VAC, or -1 if it's unsupported
by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.22 |
|
upsPhaseOutputEnergyUsage
mandatory
The output energy usage of the phase in hundredths of kWh.
|
Unsigned32 Textual Convention: CISCO-ATM-SWITCH-CUG-MIBUnsigned32 Unsigned32 |
.1.3.6.1.4.1.318.1.1.1.9.3.3.1.23 |
.1.3.6.1.4.1.318.1.1.1.10.2.2
·
1 row entry
·
4 columns
A list of SCG status table entries. The number of entries is given by the value of upsSCGNumOfGroupMembers.
An entry containing information applicable to a
particular SCG Member.
particular SCG Member.
Indexes
upsSCGStatusTableIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsSCGStatusTableIndex
mandatory
The index of a status entry for an active, communicating SCG member.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.10.2.2.1.1 |
||||
|
upsSCGMemberIP
mandatory
The IP address of an active, communicating SCG Member.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.1.1.1.10.2.2.1.2 |
||||
|
upsSCGACInputStatus
mandatory
This OID indicates the AC Input Status of the SCG Member.
acInGood(1) indicates the AC Input is within tolerance. acInBad(2) indicates the AC Input is not within tolerance. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.10.2.2.1.3 |
||||
|
upsSCGACOutputStatus
mandatory
This OID indicates the AC Output Status of the SCG Member.
acOutOn(1) indicates the UPS output is providing power to the load. acOutOff(2) indicates the UPS output is not providing power to the load. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.10.2.2.1.4 |
.1.3.6.1.4.1.318.1.1.1.12.1.2
·
1 row entry
·
6 columns
Allows for getting status of the outlet groups. The number of entries is contained in the upsOutletGroupStatusTableSize OID.
The outlet group status to get.
Indexes
upsOutletGroupStatusIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
upsOutletGroupStatusIndex
mandatory
The index to the outlet group entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.12.1.2.1.1 |
||||||
|
upsOutletGroupStatusName
mandatory
The name of the outlet group. This OID is provided
for informational purposes only. This value is set by the upsOutletGroupConfigName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.12.1.2.1.2 |
||||||
|
upsOutletGroupStatusGroupState
mandatory
Getting this variable will return the outlet group state. If the outlet
group is on, the upsOutletGroupStatusOn (1) value will be returned. If the outlet group is off, the upsOutletGroupStatusOff (2) value will be retur… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.1.2.1.3 |
||||||
|
upsOutletGroupStatusCommandPending
mandatory
Getting this variable will return the command pending
state of the outlet group. If a command is pending on the outlet group, the upsOutletGroupCommandPending (1) value will be returned. If there is not a command pendin… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.1.2.1.4 |
||||||
|
upsOutletGroupStatusOutletType
mandatory
Getting this variable will return the type of outlet group.
If present in the system, the main outlet group is 'unswitched' and must be on in order for any of the switched outlet groups to be on. Conversely, if the main… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.1.2.1.5 |
||||||
|
upsOutletGroupStatusGroupFullState
mandatory
An ASCII string containing the 32 flags representing the
current state(s) of the outlet group. If the Network Card is unable to determine the state of the outlet group, this variable is set to 'UNKNOWN'. … |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.12.1.2.1.6 |
.1.3.6.1.4.1.318.1.1.1.12.2.2
·
1 row entry
·
14 columns
The list of outlet groups to configure. The number of entries is defined by the upsOutletGroupConfigTableSize OID.
The outlet groups to configure.
Indexes
upsOutletGroupConfigIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsOutletGroupConfigIndex
mandatory
The index to the outlet group entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.1 |
||||
|
upsOutletGroupConfigName
mandatory
The name of the outlet group.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.2 |
||||
|
upsOutletGroupConfigPowerOnDelay
mandatory
The amount of time (seconds) the outlet group will delay
powering on when the delayed on, reboot, or shutdown command is applied. Allowed values vary by UPS model. The value of -1 is used for Never if supported by the U… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.3 |
||||
|
upsOutletGroupConfigPowerOffDelay
mandatory
The amount of time (seconds) the outlet group will delay
powering off when the delayed off, reboot, or shutdown command is applied. Allowed values vary by UPS model. The value of -1 is used for Never if supported by the… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.4 |
||||
|
upsOutletGroupConfigRebootDuration
mandatory
During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait (seconds) after turning the power off, at the start of the sequence, before initiating the power on sequence. A… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.5 |
||||
|
upsOutletGroupConfigMinReturnRuntime
mandatory
In an Outlet Group shutdown sequence, the Outlet Group cycles
power off then on. This OID defines the minimum amount of UPS runtime (seconds) that is required in order to power the Outlet Group on. Allowed values vary b… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.6 |
||||
|
upsOutletGroupConfigOutletType
mandatory
Getting this variable will return the type of outlet group.
If present in the system, the main outlet group is 'unswitched' and must be on in order for any of the switched outlet groups to be on. Conversely, if the main… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.7 |
||||
|
upsOutletGroupConfigLoadShedControlSkipOffDelay
mandatory
Configures whether the outlet group's off delay setting
(upsOutletGroupConfigPowerOffDelay) will be used in a load shedding situation, where applicable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.8 |
||||
|
upsOutletGroupConfigLoadShedControlAutoRestart
mandatory
Configures whether the outlet group will automatically restart
after a load shedding situation, where applicable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.9 |
||||
|
upsOutletGroupConfigLoadShedControlTimeOnBattery
mandatory
Configures whether the outlet group will load shed (turn off)
after the UPS device's time on battery has exceeded the upsOutletGroupConfigLoadShedTimeOnBattery OID setting. The settings for upsOutletGroupConfigLoadShedC… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.10 |
||||
|
upsOutletGroupConfigLoadShedControlRuntimeRemaining
mandatory
Configures whether the outlet group will load shed (turn off)
when the UPS is on battery and the remaining runtime is less than the upsOutletGroupConfigLoadShedRuntimeRemaining OID setting. The settings for upsOutletGro… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.11 |
||||
|
upsOutletGroupConfigLoadShedControlInOverload
mandatory
Configures whether the outlet group will load shed (turn off)
when the UPS is in an overload condition. The setting for upsOutletGroupConfigLoadShedControlSkipOffDelay is valid for this load shed condition. Returns -1 i… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.12 |
||||
|
upsOutletGroupConfigLoadShedTimeOnBattery
mandatory
When the UPS has been on battery for more time than this
value, the outlet group will turn off if this condition is enabled by the upsOutletGroupConfigLoadShedControlTimeOnBattery OID. Allowed values vary by UPS model. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.13 |
||||
|
upsOutletGroupConfigLoadShedRuntimeRemaining
mandatory
When the runtime remaining is less than this value, the outlet
group will turn off if this condition is enabled by the upsOutletGroupConfigLoadShedControlRuntimeRemaining OID. Allowed values vary by UPS model. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.14 |
.1.3.6.1.4.1.318.1.1.1.12.3.2
·
1 row entry
·
4 columns
Allows for control of individual outlet groups. The number of entries is contained in the upsOutletGroupControlTableSize OID.
The outlet group to control.
Indexes
upsOutletGroupControlIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsOutletGroupControlIndex
mandatory
The index to the outlet group entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.12.3.2.1.1 |
||||||||||||||||||||
|
upsOutletGroupControlName
mandatory
The name of the outlet group. This OID is provided
for informational purposes only. This value is set by the upsOutletGroupConfigName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.12.3.2.1.2 |
||||||||||||||||||||
|
upsOutletGroupControlCommand
mandatory
Getting this variable will return the outlet group state. If the outlet
group is on, the upsOutletGroupImmediateOn (1) value will be returned. If the outlet group is off, the upsOutletGroupImmediateOff (2) value will be… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.3.2.1.3 |
||||||||||||||||||||
|
upsOutletGroupControlOutletType
mandatory
Getting this variable will return the type of outlet group.
If present in the system, the main outlet group is 'unswitched' and must be on in order for any of the switched outlet groups to be on. Conversely, if the main… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.12.3.2.1.4 |
.1.3.6.1.4.1.318.1.1.1.13.1.2
·
1 row entry
·
10 columns
Allows for diagnostics of individual Intelligence Modules. The number of entries is contained in the upsDiagIMTableSize OID.
The diagnostics and information of an Intelligence Module.
Indexes
upsDiagIMIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagIMIndex
mandatory
The index to the Intelligence Module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.1 |
||||||||||||||
|
upsDiagIMType
mandatory
The type of the Intelligence Module.
imUnknown(1) indicates the IM type is unknown. imMIM(2) indicates the IM type is a Main Intelligence Module. imRIM(3) indicates the IM type is Redundant Intelligence Module. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.2 |
||||||||||||||
|
upsDiagIMStatus
mandatory
The status of the Intelligence Module.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates the … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.3 |
||||||||||||||
|
upsDiagIMFirmwareRev
mandatory
The firmware revision of the Intelligence Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.4 |
||||||||||||||
|
upsDiagIMSlaveFirmwareRev
mandatory
The slave firmware revision of the Intelligence Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.5 |
||||||||||||||
|
upsDiagIMHardwareRev
mandatory
The hardware revision of the Intelligence Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.6 |
||||||||||||||
|
upsDiagIMSerialNum
mandatory
The serial number of the Intelligence Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.7 |
||||||||||||||
|
upsDiagIMManufactureDate
mandatory
The manufacture date of the Intelligence Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.8 |
||||||||||||||
|
upsDiagIMInControl
mandatory
The Intelligence Module state.
activeInControl(1) indicates the IM is active and in control. passive(2) indicates the IM is in passive state. unknown(3) indicates the IM is in unknown state. fault(4) indicates the IM is… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.9 |
||||||||||||||
|
upsDiagIMSKU
mandatory
The SKU of the Intelligence Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.1.2.1.10 |
.1.3.6.1.4.1.318.1.1.1.13.2.2
·
1 row entry
·
11 columns
Allows for diagnostics of Individual Power modules. The number of entries is contained in the upsDiagPMTableSize OID.
The diagnostics of a Power Module.
Indexes
upsDiagPMIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagPMIndex
mandatory
The index to the Power Module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.1 |
||||||||||||||
|
upsDiagPMStatus
mandatory
The status of the Power Module.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates the device … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.2 |
||||||||||||||
|
upsDiagPMFirmwareRev
mandatory
The firmware revision of the Power Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.3 |
||||||||||||||
|
upsDiagPMHardwareRev
mandatory
The hardware revision of the Power Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.4 |
||||||||||||||
|
upsDiagPMSerialNum
mandatory
The serial number of the Power Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.5 |
||||||||||||||
|
upsDiagPMManufactureDate
mandatory
The manufacture date of the Power Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.6 |
||||||||||||||
|
upsDiagPMModelNum
mandatory
The model number of the Power Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.7 |
||||||||||||||
|
upsDiagPMRating
optional
The power rating (in kVA) of the Power Module
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.8 |
||||||||||||||
|
upsDiagPMSKU
optional
The SKU of the Power Module
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.9 |
||||||||||||||
|
upsDiagPMAverageFanSpeed
optional
The average fan speed of the working fans in the Power Module in revolutions per minute (RPM).
Returns (-1) if not set. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.10 |
||||||||||||||
|
upsDiagPMAmbientTemperature
optional
The ambient temperature inside the Power Module in tenths of degrees celsius.
If not available, this variable is set to (-1999). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.2.1.11 |
.1.3.6.1.4.1.318.1.1.1.13.2.3
·
1 row entry
·
7 columns
Allows for diagnostics of individual power module's lifetime information. The number of entries is contained in the upsDiagPMTableSize OID.
The diagnostics of a Power Module lifetime information.
Indexes
upsDiagPMLifetimeInfoIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagPMLifetimeInfoIndex
mandatory
The index to the Power Module lifetime information entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.3.1.1 |
||||||||
|
upsDiagPMLifetimeStatus
mandatory
The status of the Power Module lifetime information.
ok(1) indicates the device lifetime status is OK. nearEnd(2) indicates the device lifetime status is near end. exceeded(3) indicates the device lifetime status is exc… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.2.3.1.2 |
||||||||
|
upsDiagPMEstmtdLifetimeRmng
mandatory
Displays the time remaining for the module before it should be replaced.
Measured in months. This value is set when you originally install the module. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.3.1.3 |
||||||||
|
upsDiagPMEstmtdLifetimeRmngPct
mandatory
Displays the percentage of the total lifetime remaining for the module
before it should be replaced. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.3.1.4 |
||||||||
|
upsDiagPMFanLifetimeStatus
mandatory
The status of the Power Module Fan lifetime information.
ok(1) indicates the device lifetime status is OK. nearEnd(2) indicates the device lifetime status is near end. exceeded(3) indicates the device lifetime status is… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.2.3.1.5 |
||||||||
|
upsDiagPMFanEstmtdLifetimeRmng
mandatory
Displays the time remaining, measured in months, before the module's
fan should be replaced. It is reset by the field service engineer when a new fan is installed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.3.1.6 |
||||||||
|
upsDiagPMFanEstmtdLifetimeRmngPct
mandatory
Displays the percentage of the total lifetime remaining
before the module's fan should be replaced. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.3.1.7 |
.1.3.6.1.4.1.318.1.1.1.13.2.5
·
1 row entry
·
5 columns
Allows for the diagnostics of individual power module enclosure door filters. The number of entries is contained in the upsDiagPMEnclDoorFltrTableSize OID.
Power module door filter diagnostics info.
Indexes
upsDiagPMEnclIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagPMEnclIndex
mandatory
The index to the power module enclosure entry.
Enclosure 0 indicates the Power enclosure 1. Enclosure 1 indicates the Power enclosure 2. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.5.1.1 |
||||||||
|
upsDiagPMEnclDoorFltrLifetime
mandatory
Door filter replacement time interval, based on the installation enivironment.
heavyFiltration15days (1) indicates door filter needs to be replaced within 15 days. normalFiltration30days (2) indicates door filter needs … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.2.5.1.2 |
||||||||
|
upsDiagPMEnclDoorFltrStatus
mandatory
Indicates the current status of the door filter.
ok(1) indicates the device lifetime status is OK. nearEnd(2) indicates the device lifetime status is near end. exceeded(3) indicates the device lifetime status is exceede… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.2.5.1.3 |
||||||||
|
upsDiagPMEnclDoorFltrEstmtdLifetimeRmng
mandatory
Displays the time remaining, measured in days, before the module door filter should be replaced.
This value is set when you originally install the module. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.5.1.4 |
||||||||
|
upsDiagPMEnclDoorFltrEstmtdLifetimeRmngPct
mandatory
Displays the percentage of the total lifetime remaining for the module
door filter before it should be replaced. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.2.5.1.5 |
.1.3.6.1.4.1.318.1.1.1.13.3.2
·
1 row entry
·
11 columns
Allows for diagnostics of individual batteries. The number of entries is contained in the upsDiagBattTableSize OID.
The diagnostics of a battery.
Indexes
upsDiagBatteryIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagBatteryFrameIndex
mandatory
The index to the battery frame entry.
Frame 0 indicates the Main frame. Extended Run (XR) frames start from index 1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.1 |
||||||||||||||
|
upsDiagBatteryIndex
mandatory
The index to the battery entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.2 |
||||||||||||||
|
upsDiagBatteryStatus
mandatory
The status of the battery.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. ok(3) indicates the battery status is OK. failed(4) indicates the battery status is fa… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.3 |
||||||||||||||
|
upsDiagBatterySerialNumber
mandatory
The serial number of the battery.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.4 |
||||||||||||||
|
upsDiagBatteryFirmwareRev
mandatory
The firmware revision of the battery.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.5 |
||||||||||||||
|
upsDiagBatteryManufactureDate
mandatory
The manufacture date of the battery.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.6 |
||||||||||||||
|
upsDiagBatteryType
mandatory
The battery type or rating for the battery.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.7 |
||||||||||||||
|
upsDiagBatteryFramePresent
mandatory
The battery frame/cabinet status.
0 indicates frame/cabinet is not present. 1 indicates frame/cabinet is present. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.8 |
||||||||||||||
|
upsDiagBatteryFrameTemperature
mandatory
The battery frame/cabinet temperature in tenths of degrees celsius.
If the frame/cabinet is not present, this variable is set to (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.9 |
||||||||||||||
|
upsDiagBatterySKU
mandatory
The SKU of the battery.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.3.2.1.10 |
||||||||||||||
|
upsDiagBatteryHealth
mandatory
The battery health.
bit 0 Battery lifetime okay bit 1 Battery lifetime near end, order replacement module bit 2 Battery lifetime exceeded, replace battery bit 3 Battery lifetime near end acknowledged, order replacement … |
OctetString | .1.3.6.1.4.1.318.1.1.1.13.3.2.1.11 |
.1.3.6.1.4.1.318.1.1.1.13.3.4
·
1 row entry
·
5 columns
Allows for diagnostics of individual battery frame. The number of entries is contained in the upsDiagBatteryFrameTableSize OID.
The diagnostics of a battery frame.
Indexes
upsDiagBatteryFrameTableIndex
| Column | Syntax | OID |
|---|---|---|
|
upsDiagBatteryFrameTableIndex
mandatory
The index to the battery frame entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.3.4.1.1 |
|
upsDiagBatteryModuleStatusPerFrame
mandatory
An ASCII string containing the 64 flags representing
the status of battery modules. 1 indicates battery module installed, 0 indicates battery module not installed. The flags are numbered from 1 to 64, and… |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.3.4.1.2 |
|
upsDiagBatteryPositiveVoltage
mandatory
The battery positive voltage, in Volts.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.3.4.1.3 |
|
upsDiagBatteryNegativeVoltage
mandatory
The battery negative voltage, in Volts.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.3.4.1.4 |
|
upsDiagBatteryTemperature
mandatory
The battery frame/cabinet temperature in tenths of degrees celsius.
If the frame/cabinet is not present, this variable is set to (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.3.4.1.5 |
.1.3.6.1.4.1.318.1.1.1.13.4.2
·
1 row entry
·
7 columns
Allows for diagnostics of individual XR Frames.
The diagnostics of an XR Frame.
Indexes
upsDiagSubSysFrameIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.2.1.1 |
||||||||||
|
upsDiagSubSysFrameType
mandatory
The type of Frame.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. frameTypeMain(3) indicates the frame type is the Main Frame. frameTypeXR(4) indicates the fram… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.2.1.2 |
||||||||||
|
upsDiagSubSysFrameFirmwareRev
mandatory
The firmware revision of the frame.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.2.1.3 |
||||||||||
|
upsDiagSubSysFrameHardwareRev
mandatory
The hardware revision of the frame.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.2.1.4 |
||||||||||
|
upsDiagSubSysFrameSerialNum
mandatory
The serial number of the frame.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.2.1.5 |
||||||||||
|
upsDiagSubSysFrameManufactureDate
mandatory
The manufacture date of the frame.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.2.1.6 |
||||||||||
|
upsDiagSubSysFrameSKU
mandatory
The SKU of the frame.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.2.1.7 |
.1.3.6.1.4.1.318.1.1.1.13.4.4
·
1 row entry
·
10 columns
Allows for diagnostics of the Internal Bypass Switch.
The diagnostics of the Internal Bypass Switch.
Indexes
upsDiagSubSysIntBypSwitchIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysIntBypSwitchFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.1 |
||||||||||||||
|
upsDiagSubSysIntBypSwitchIndex
mandatory
The Internal Bypass Switch index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.2 |
||||||||||||||
|
upsDiagSubSysIntBypSwitchStatus
mandatory
The Internal Bypass Switch status.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates the devi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.3 |
||||||||||||||
|
upsDiagSubSysIntBypSwitchFirmwareRev
mandatory
The firmware revision of the Internal Bypass Switch.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.4 |
||||||||||||||
|
upsDiagSubSysIntBypSwitchHardwareRev
mandatory
The hardware revision of the Internal Bypass Switch.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.5 |
||||||||||||||
|
upsDiagSubSysIntBypSwitchSerialNum
mandatory
The serial number of the Internal Bypass Switch.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.6 |
||||||||||||||
|
upsDiagSubSysIntBypSwitchManufactureDate
mandatory
The manufacture date of the Internal Bypass Switch.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.7 |
||||||||||||||
|
upsDiagSubSysIntBypSwitchModelNum
mandatory
The model number of the Internal Bypass Switch.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.8 |
||||||||||||||
|
upsDiagSubSysIntBypFanSpeed
optional
The average fan speed of the working fans in the Internal Bypass Switch in revolutions per minute (RPM).
Returns (-1) if not set. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.9 |
||||||||||||||
|
upsDiagSubSysIntBypAmbientTemperature
optional
The ambient temperature in tenths of degrees celcius inside the Internal Bypass Switch.
If not available, this variable is set to (-1999). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.4.1.10 |
.1.3.6.1.4.1.318.1.1.1.13.4.6
·
1 row entry
·
7 columns
Allows for diagnostics of the Battery Monitor Board.
The diagnostics of the Battery Monitor Board.
Indexes
upsDiagSubSysBattMonitorIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysBattMonitorFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.6.1.1 |
||||||||||||||
|
upsDiagSubSysBattMonitorIndex
mandatory
The index of the Battery Monitor Board.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.6.1.2 |
||||||||||||||
|
upsDiagSubSysBattMonitorStatus
mandatory
The status of the Battery Monitor Board.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates th… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.6.1.3 |
||||||||||||||
|
upsDiagSubSysBattMonitorFirmwareRev
mandatory
The firmware revision of the Battery Monitor Board.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.6.1.4 |
||||||||||||||
|
upsDiagSubSysBattMonitorHardwareRev
mandatory
The hardware revision of the Battery Monitor Board.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.6.1.5 |
||||||||||||||
|
upsDiagSubSysBattMonitorSerialNum
mandatory
The serial number of the Battery Monitor Board.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.6.1.6 |
||||||||||||||
|
upsDiagSubSysBattMonitorManufactureDate
mandatory
The date of the manufacture for the Battery Monitor Board.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.6.1.7 |
.1.3.6.1.4.1.318.1.1.1.13.4.8
·
1 row entry
·
8 columns
Allows for diagnostics of the individual External Switch Gear.
The diagnostics of an individual External Switch Gear.
Indexes
upsDiagSubSysExternalSwitchGearIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysExternalSwitchGearFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.8.1.1 |
||||||||||||||
|
upsDiagSubSysExternalSwitchGearIndex
mandatory
The index of the External Switch Gear.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.8.1.2 |
||||||||||||||
|
upsDiagSubSysExternalSwitchGearStatus
mandatory
The status of the External Switch Gear.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.8.1.3 |
||||||||||||||
|
upsDiagSubSysExternalSwitchGearFirmwareRev
mandatory
The firmware revision of the External Switch Gear monitor card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.8.1.4 |
||||||||||||||
|
upsDiagSubSysExternalSwitchGearHardwareRev
mandatory
The hardware revision of the External Switch Gear monitor card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.8.1.5 |
||||||||||||||
|
upsDiagSubSysExternalSwitchGearSerialNum
mandatory
The serial number of the External Switch Gear monitor card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.8.1.6 |
||||||||||||||
|
upsDiagSubSysExternalSwitchGearManufactureDate
mandatory
The date of the manufacture for the External Switch Gear monitor card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.8.1.7 |
||||||||||||||
|
upsDiagSubSysExternalSwitchGearTemperature
mandatory
The temperature of the air around the External Switch
Gear monitor card in tenths of degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.8.1.8 |
.1.3.6.1.4.1.318.1.1.1.13.4.10
·
1 row entry
·
3 columns
Allows for diagnostics of individual Display Interface Cards.
The diagnostics of a Display Interface Card.
Indexes
upsDiagSubSysDisplayInterfaceCardIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysDisplayInterfaceCardFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.10.1.1 |
||||||||||||||
|
upsDiagSubSysDisplayInterfaceCardIndex
mandatory
The index of the Display Interface Card.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.10.1.2 |
||||||||||||||
|
upsDiagSubSysDisplayInterfaceCardStatus
mandatory
The status of the Display Interface Card.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates t… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.10.1.3 |
.1.3.6.1.4.1.318.1.1.1.13.4.12
·
1 row entry
·
3 columns
Allows for diagnostics of individual DC Circuit Breakers.
The diagnostics of a DC Circuit Breaker.
Indexes
upsDiagSubSysDCCircuitBreakerIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysDCCircuitBreakerFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.12.1.1 |
||||||||
|
upsDiagSubSysDCCircuitBreakerIndex
mandatory
The index of the DC Circuit Breaker.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.12.1.2 |
||||||||
|
upsDiagSubSysDCCircuitBreakerStatus
mandatory
The status of the DC Circuit Breaker.
unknown(1) indicates the circuit breaker status is unknown. notInstalled(2) indicates the circuit breaker is not installed. opened(3) indicates the circuit breaker is opened. closed… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.12.1.3 |
.1.3.6.1.4.1.318.1.1.1.13.4.14
·
1 row entry
·
7 columns
Allows for diagnostics of individual System Power Supplies.
The diagnostics of a System Power Supply.
Indexes
upsDiagSubSysSystemPowerSupplyIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysSystemPowerSupplyFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.14.1.1 |
||||||||||||||
|
upsDiagSubSysSystemPowerSupplyIndex
mandatory
The index of a System Power Supply.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.14.1.2 |
||||||||||||||
|
upsDiagSubSysSystemPowerSupplyStatus
mandatory
The status of the System Power Supply.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates the … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.14.1.3 |
||||||||||||||
|
upsDiagSubSysSystemPowerSupplyFirmwareRev
mandatory
The firmware revision of the System Power Supply monitor card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.14.1.4 |
||||||||||||||
|
upsDiagSubSysSystemPowerSupplyHardwareRev
mandatory
The hardware revision of the System Power Supply monitor card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.14.1.5 |
||||||||||||||
|
upsDiagSubSysSystemPowerSupplySerialNum
mandatory
The serial number of the System Power Supply monitor card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.14.1.6 |
||||||||||||||
|
upsDiagSubSysSystemPowerSupplyManufactureDate
mandatory
The date of the manufacture for the System Power Supply monitor card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.14.1.7 |
.1.3.6.1.4.1.318.1.1.1.13.4.16
·
1 row entry
·
5 columns
Allows for diagnostics of individual XR Communication Cards.
The diagnostics of an XR Communication Card.
Indexes
upsDiagSubSysXRCommunicationCardIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysXRCommunicationCardFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.16.1.1 |
||||||||||||||
|
upsDiagSubSysXRCommunicationCardIndex
mandatory
The index of an XR Communication Card.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.16.1.2 |
||||||||||||||
|
upsDiagSubSysXRCommunicationCardStatus
mandatory
The status of the XR Communication Card.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates th… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.16.1.3 |
||||||||||||||
|
upsDiagSubSysXRCommunicationCardFirmwareRev
mandatory
The firmware revision of the XR Communication card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.16.1.4 |
||||||||||||||
|
upsDiagSubSysXRCommunicationCardSerialNum
mandatory
The serial number of the XR Communication card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.16.1.5 |
.1.3.6.1.4.1.318.1.1.1.13.4.18
·
1 row entry
·
3 columns
Allows for diagnostics of individual External Power Frame Boards.
The diagnostics of an External Power Frame Board.
Indexes
upsDiagSubSysExternalPowerFrameBoardIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysExternalPowerFrameBoardFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.18.1.1 |
||||||||||||||
|
upsDiagSubSysExternalPowerFrameBoardIndex
mandatory
The index of an External Power Frame Board.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.18.1.2 |
||||||||||||||
|
upsDiagSubSysExternalPowerFrameBoardStatus
mandatory
The status of the External Power Frame Board.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicat… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.18.1.3 |
.1.3.6.1.4.1.318.1.1.1.13.4.20
·
1 row entry
·
3 columns
Allows for diagnostics of individual chargers.
The diagnostics of a charger.
Indexes
upsDiagSubSysChargerIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysChargerFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.20.1.1 |
||||||||||||||
|
upsDiagSubSysChargerIndex
mandatory
The index of a charger.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.20.1.2 |
||||||||||||||
|
upsDiagSubSysChargerStatus
mandatory
The status of the Charger.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates the device statu… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.20.1.3 |
.1.3.6.1.4.1.318.1.1.1.13.4.22
·
1 row entry
·
7 columns
Allows for diagnostics of individual Inverters.
The diagnostics of an Inverter.
Indexes
upsDiagSubSysInverterIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysInverterFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.22.1.1 |
||||||||||||||
|
upsDiagSubSysInverterIndex
mandatory
The index of an Inverter.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.22.1.2 |
||||||||||||||
|
upsDiagSubSysInverterStatus
mandatory
The status of the Inverter.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates the device stat… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.22.1.3 |
||||||||||||||
|
upsDiagSubSysInverterFirmwareRev
mandatory
The firmware revision of the Inverter monitor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.22.1.4 |
||||||||||||||
|
upsDiagSubSysInverterHardwareRev
mandatory
The hardware revision of the Inverter monitor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.22.1.5 |
||||||||||||||
|
upsDiagSubSysInverterSerialNum
mandatory
The serial number of the Inverter monitor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.22.1.6 |
||||||||||||||
|
upsDiagSubSysInverterManufactureDate
mandatory
The date of manufacture for the Inverter monitor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.22.1.7 |
.1.3.6.1.4.1.318.1.1.1.13.4.24
·
1 row entry
·
7 columns
Allows for diagnostics of individual PowerFactorCorrections.
The diagnostics of a Power Factor Correction.
Indexes
upsDiagSubSysPowerFactorCorrectionIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysPowerFactorCorrectionFrameIndex
mandatory
The frame index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.24.1.1 |
||||||||||||||
|
upsDiagSubSysPowerFactorCorrectionIndex
mandatory
The index of a Power Factor Correction.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.24.1.2 |
||||||||||||||
|
upsDiagSubSysPowerFactorCorrectionStatus
mandatory
The status of the Power Factor Correction.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.24.1.3 |
||||||||||||||
|
upsDiagSubSysPowerFactorCorrectionFirmwareRev
mandatory
The firmware revision of the Power Factor Correction monitor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.24.1.4 |
||||||||||||||
|
upsDiagSubSysPowerFactorCorrectionHardwareRev
mandatory
The hardware revision of the Power Factor Correction monitor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.24.1.5 |
||||||||||||||
|
upsDiagSubSysPowerFactorCorrectionSerialNum
mandatory
The serial number of the Power Factor Correction monitor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.24.1.6 |
||||||||||||||
|
upsDiagSubSysPowerFactorCorrectionManufactureDate
mandatory
The date of the manufacture for the Power Factor Correction monitor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.24.1.7 |
.1.3.6.1.4.1.318.1.1.1.13.4.26
·
1 row entry
·
7 columns
Allows for getting diagnostics information of an individual Network Communication Card.
The diagnostics of a Network Communication Card.
Indexes
upsDiagSubSysNetworkComCardIndex
| Column | Syntax | OID |
|---|---|---|
|
upsDiagSubSysNetworkComCardIndex
mandatory
The UPS network and display interface communication card index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.26.1.1 |
|
upsDiagSubSysNetworkComCardModelNumber
mandatory
A character string identifying the model number of the UPS network and display interface communication card.
This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.26.1.2 |
|
upsDiagSubSysNetworkComCardSerialNumber
mandatory
A character string identifying the serial number of the UPS network and display interface communication card.
This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.26.1.3 |
|
upsDiagSubSysNetworkComCardDateOfManufacture
mandatory
The date when the UPS network and display interface communication card was manufactured in mm/dd/yyyy format.
This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.26.1.4 |
|
upsDiagSubSysNetworkComCardHardwareRev
mandatory
The hardware revision of the UPS network and display interface communication card.
This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.26.1.5 |
|
upsDiagSubSysNetworkComCardFirmwareAppRev
mandatory
An ID string identifying the application firmware revision of the
UPS network and display interface communication card. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.26.1.6 |
|
upsDiagSubSysNetworkComCardFirmwareAppOSRev
mandatory
An ID string identifying the application operating system firmware revision of the
UPS network and display interface communication card. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.26.1.7 |
.1.3.6.1.4.1.318.1.1.1.13.4.28
·
1 row entry
·
6 columns
Allows for diagnostics of the user supplied Battery Monitor Board.
The diagnostics of the user supplied Battery Monitor Board.
Indexes
upsDiagSubSysUsrSuppBattMonitorIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysUsrSuppBattMonitorIndex
mandatory
The index of the user supplied Battery Monitor Board.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.28.1.1 |
||||||||||||||
|
upsDiagSubSysUsrSuppBattMonitorStatus
mandatory
The status of the user supplied Battery Monitor Board.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.28.1.2 |
||||||||||||||
|
upsDiagSubSysUsrSuppBattMonitorFirmwareRev
mandatory
The firmware revision of the user supplied Battery Monitor Board.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.28.1.3 |
||||||||||||||
|
upsDiagSubSysUsrSuppBattMonitorHardwareRev
mandatory
The hardware revision of the user supplied
Battery Monitor Board. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.28.1.4 |
||||||||||||||
|
upsDiagSubSysUsrSuppBattMonitorSerialNum
mandatory
The serial number of the user supplied
Battery Monitor Board. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.28.1.5 |
||||||||||||||
|
upsDiagSubSysUsrSuppBattMonitorTemperature
mandatory
The temperature of the air around the user supplied
Battery Monitor Board in tenths of degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.28.1.6 |
.1.3.6.1.4.1.318.1.1.1.13.4.31
·
1 row entry
·
2 columns
Allows for diagnostics of individual Power Supply Units. The number of entries is contained in the upsDiagSubSysPSUTableSize OID.
The diagnostics information of a Power Supply Unit.
Indexes
upsDiagSubSysPSUIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysPSUIndex
mandatory
The index to the Power Supply Unit entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.31.1.1 |
||||||||||||||
|
upsDiagSubSysPSUStatus
mandatory
The status of the Power Supply Unit.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates the de… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.31.1.2 |
.1.3.6.1.4.1.318.1.1.1.13.4.33
·
1 row entry
·
5 columns
Allows for diagnostics of the ID and Relay Controller Card.
The diagnostics of the ID and Relay Controller Card.
Indexes
upsDiagSubSysIDRCIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysIDRCIndex
mandatory
The index of the ID and Relay Controller Card.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.33.1.1 |
||||||||||||||
|
upsDiagSubSysIDRCStatus
mandatory
The status of the ID and Relay Controller Card.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indic… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.33.1.2 |
||||||||||||||
|
upsDiagSubSysIDRCFirmwareRev
mandatory
The firmware revision of the ID and Relay Controller Card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.33.1.3 |
||||||||||||||
|
upsDiagSubSysIDRCHardwareRev
mandatory
The hardware revision of the ID and Relay Controller Card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.33.1.4 |
||||||||||||||
|
upsDiagSubSysIDRCSerialNum
mandatory
The serial number of the ID
and Relay Controller Card. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.33.1.5 |
.1.3.6.1.4.1.318.1.1.1.13.4.36
·
1 row entry
·
4 columns
Backfeed protection contactor table.
A list of backfeed protection contactors.
Indexes
upsDiagSubSysbackfeedContactorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysbackfeedContactorIndex
mandatory
The index of the backfeed protection contactor.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.36.1.1 |
||||||
|
upsDiagSubSysbackfeedContactorName
mandatory
The name of the backfeed protection contactor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.4.36.1.2 |
||||||
|
upsDiagSubSysbackfeedContactorType
mandatory
Indicates the backfeed protection contactor types available in the UPS system.
If the UPS is unable to find any attached contactors, this variable is set to unknown(1). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.36.1.3 |
||||||
|
upsDiagSubSysbackfeedContactorStatus
mandatory
The status of backfeed protection contactor.
unknown(1) indicates the contactor status is unknown. opened (2) indicates the contactor is opened. closed (3) indicates the contactor is closed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.36.1.4 |
.1.3.6.1.4.1.318.1.1.1.13.4.38
·
1 row entry
·
4 columns
Allows for diagnostics of the Internal Bypass Switch life time infomation.
The diagnostics of the Internal Bypass Switch.
Indexes
upsDiagSubSysIntBypSwitchFanLifetimeInfoIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagSubSysIntBypSwitchFanLifetimeInfoIndex
mandatory
The index to the Internal Bypass Switch Fan liftime information entry
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.38.1.1 |
||||||||
|
upsDiagSubSysIntBypSwitchFanLifetimeStatus
mandatory
The status of the Internal Bypass Switch Fan lifetime information.
ok(1) indicates the device lifetime status is OK. nearEnd(2) indicates the device lifetime status is near end. exceeded(3) indicates the device lifetime… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.4.38.1.2 |
||||||||
|
upsDiagSubSysIntBypSwitchFanEstmtdLifetimeRmng
mandatory
Displays the time remaining for the module before it should be replaced.
Measured in months. This value is set when you originally install the module. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.38.1.3 |
||||||||
|
upsDiagSubSysIntBypSwitchFanEstmtdLifetimeRmngPct
mandatory
Displays the percentage of the total lifetime remaining for the module
before it should be replaced. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.4.38.1.4 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.7
·
1 row entry
·
5 columns
Switchgear breaker table.
A list of switchgear breakers.
Indexes
switchgearBreakerIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
switchgearBreakerIndex
mandatory
The index of the switchgear breaker.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.7.1.1 |
||||||||||||||||||||
|
switchgearBreakerPresent
mandatory
Indicates if the switchgear breaker is present.
notPresent(1) indicates that the breaker is not present. present(2) indicates that the breaker is present. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.5.1.7.1.2 |
||||||||||||||||||||
|
switchgearBreakerName
mandatory
The name of the switchgear breaker.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.5.1.7.1.3 |
||||||||||||||||||||
|
switchgearBreakerType
mandatory
Indicates the switchgear breaker types available in the UPS system.
If the UPS is unable to find any attached breakers, this variable is set to unknown(1). If the system has multiple breakers of the same type (e.g. mul… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.5.1.7.1.4 |
||||||||||||||||||||
|
switchgearBreakerStatus
mandatory
The status of switchgear breaker.
unknown(1) indicates the breaker status is unknown. opened (2) indicates the breaker is opened. closed (3) indicates the breaker is closed. NOTE: If there are more than one breaker of t… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.5.1.7.1.5 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.9
·
1 row entry
·
8 columns
Subfeed breaker table.
A list of subfeed breakers.
Indexes
subfeedBreakerIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
subfeedBreakerIndex
mandatory
The index of the subfeed breakers.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.9.1.1 |
||||||||
|
subfeedBreakerPresent
mandatory
Indicates if the subfeed breaker is present.
notPresent (1) indicates that the breaker is not present. present (2) indicates that the breaker is present. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.5.1.9.1.2 |
||||||||
|
subfeedBreakerRating
mandatory
The current rating of the installed subfeed breaker.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.9.1.3 |
||||||||
|
subfeedBreakerUpperAcceptPowerWarning
mandatory
The maximum acceptable load before warning is issued.
Expressed as percent of the subfeed breaker rating. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.9.1.4 |
||||||||
|
subfeedBreakerUpperAcceptPowerCritical
mandatory
The maximum load before a critical alarm occurs.
Expressed as percent of the subfeed breaker rating. |
Integer32r/w Constraints: range: 0-125 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.9.1.5 |
||||||||
|
subfeedBreakerStatus
mandatory
The status of the Circuit Breaker.
unknown(1) indicates the circuit breaker status is unknown. notInstalled(2) indicates the circuit breaker is not installed. opened(3) indicates the circuit breaker is opened. closed(4)… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.5.1.9.1.6 |
||||||||
|
subfeedBreakerName
mandatory
The name of the subfeed breaker.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.5.1.9.1.7 |
||||||||
|
subfeedBreakerCurrent
mandatory
The subfeed current in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.9.1.8 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.11
·
1 row entry
·
4 columns
A list of subfeed phase table.
An entry containing information applicable to a
particular phase.
particular phase.
Indexes
upsDiagSubFeedPhaseIndex
| Column | Syntax | OID |
|---|---|---|
|
upsDiagSubFeedBreakerIndex
mandatory
The subfeed breaker index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.11.1.1 |
|
upsDiagSubFeedPhaseIndex
mandatory
The subfeed phase index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.11.1.2 |
|
upsDiagSubFeedPhaseCurrent
mandatory
The subfeed phase current in Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.11.1.3 |
|
upsDiagSubFeedPhaseCurrentAlternate
mandatory
The subfeed phase current in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.11.1.4 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.15
·
1 row entry
·
6 columns
Allows for diagnostics of the user supplied Switch Gear Monitor Board.
The diagnostics of the user supplied Switch Gear Monitor Board.
Indexes
upsDiagUsrSuppSwitchgearMonitorIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagUsrSuppSwitchgearMonitorIndex
mandatory
The index of the user supplied Switch Gear Monitor Board.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.15.1.1 |
||||||||||||||
|
upsDiagUsrSuppSwitchgearMonitorStatus
mandatory
The status of the user supplied Switch Gear Monitor Board.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. on… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.5.1.15.1.2 |
||||||||||||||
|
upsDiagUsrSuppSwitchgearMonitorFirmwareRev
mandatory
The firmware revision of the user supplied Switch Gear Monitor Board.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.5.1.15.1.3 |
||||||||||||||
|
upsDiagUsrSuppSwitchgearMonitorHardwareRev
mandatory
The hardware revision of the user supplied Switch Gear Monitor Board.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.5.1.15.1.4 |
||||||||||||||
|
upsDiagUsrSuppSwitchgearMonitorSerialNum
mandatory
The serial number of the user supplied
Switch Gear Monitor Board. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.5.1.15.1.5 |
||||||||||||||
|
upsDiagUsrSuppSwitchgearMonitorTemperature
mandatory
The temperature of the air around the user supplied
Switch Gear Monitor Board in tenths of degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.5.1.15.1.6 |
.1.3.6.1.4.1.318.1.1.1.13.7.2
·
1 row entry
·
2 columns
Allows for diagnostics of individual Power Cabinets. The number of entries is contained in the upsDiagnosticPowerCabinetTableSize OID.
The diagnostics of a Power Cabinet.
Indexes
upsDiagnosticPowerCabinetIndex
| Column | Syntax | OID |
|---|---|---|
|
upsDiagnosticPowerCabinetIndex
mandatory
The index to the Power Cabinet.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.7.2.1.1 |
|
upsDiagnosticPowerCabinetAmbientTemperature
mandatory
The ambient temperature of Power Cabinet in tenths of degrees Celsius.
If the Power Cabinet is not present, this variable is set to (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.7.2.1.2 |
.1.3.6.1.4.1.318.1.1.1.13.9.2
·
1 row entry
·
6 columns
Allows for diagnostics of individual Intelligence Modules. The number of entries is contained in the upsDiagUnitControllerTableSize OID.
The diagnostics and information of an Intelligence Module.
Indexes
upsDiagUnitControllerIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsDiagUnitControllerIndex
mandatory
The index to the Unit Controller entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.13.9.2.1.1 |
||||||||||||||
|
upsDiagUnitControllerStatus
mandatory
The status of the Unit Controller.
unknown(1) indicates the device status is unknown. notInstalled(2) indicates the device is not installed. offOk(3) indicates the device status is off and OK. onOk(4) indicates the devi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.13.9.2.1.2 |
||||||||||||||
|
upsDiagUnitControllerFirmwareRev
mandatory
The firmware revision of the Unit Controller.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.9.2.1.3 |
||||||||||||||
|
upsDiagUnitControllerHardwareRev
mandatory
The hardware revision of the Unit Controller.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.9.2.1.4 |
||||||||||||||
|
upsDiagUnitControllerSerialNum
mandatory
The serial number of the Unit Controller.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.9.2.1.5 |
||||||||||||||
|
upsDiagUnitControllerModelNum
mandatory
The model number of the Unit Controller.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.13.9.2.1.6 |
.1.3.6.1.4.1.318.1.1.1.14.7
·
1 row entry
·
10 columns
A list of input table entries.
An entry containing information applicable to a
particular input phase.
particular input phase.
Indexes
upsParallelInputPhaseTableIndex upsParallelInputPhaseIndex
| Column | Syntax | OID |
|---|---|---|
|
upsParallelInputPhaseTableIndex
mandatory
The parallel unit identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.1 |
|
upsParallelInputPhaseIndex
mandatory
The input phase identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.2 |
|
upsParallelInputCurrent
mandatory
The input current in amperes, or -1 if it's
unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.3 |
|
upsParallelInputActivePower
mandatory
The input power in kW, or -1 if it's
unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.4 |
|
upsParallelInputApparentPower
mandatory
The input apparent power in kVA, or -1 if it's
unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.5 |
|
upsParallelInputVoltage
mandatory
The input voltage of UPS in volts, or -1 if it's
unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.6 |
|
upsParallelInputMaxVoltage
mandatory
The peak input voltage in VAC measured since the last reset,
or -1 if it's unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.7 |
|
upsParallelInputMaxCurrent
mandatory
The peak input current in amperes measured since last reset,
or -1 if it's unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.8 |
|
upsParallelInputTotalActivePower
mandatory
Total active input power of the parallel system in kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.9 |
|
upsParallelInputTotalApparentPower
mandatory
Total apparent input power of the parallel system in kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.7.1.10 |
.1.3.6.1.4.1.318.1.1.1.14.8
·
1 row entry
·
6 columns
A list of output table entries. The number of entries is given by the sum of the upsPhaseNumOutputPhases.
An entry containing information applicable to a
particular output phase.
particular output phase.
Indexes
upsParallelOutputPhaseTableIndex upsParallelOutputPhaseIndex
| Column | Syntax | OID |
|---|---|---|
|
upsParallelOutputPhaseTableIndex
mandatory
The output identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.8.1.1 |
|
upsParallelOutputPhaseIndex
mandatory
The output phase identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.8.1.2 |
|
upsParallelOutputCurrent
mandatory
The output current in amperes drawn
by the load on the UPS, or -1 if it's unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.8.1.3 |
|
upsParallelOutputLoad
mandatory
The output load in VA, or -1 if it's unsupported
by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.8.1.4 |
|
upsParallelOutputPercentLoad
mandatory
The percentage of the UPS load capacity in VA at
present redundancy being used on this output phase, or -1 if it's unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.8.1.5 |
|
upsParallelOutputPower
mandatory
The output power in Watts, or -1 if it's
unsupported by this UPS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.8.1.6 |
.1.3.6.1.4.1.318.1.1.1.14.9
·
1 row entry
·
2 columns
A list of output table entries. The number of entries is given by the value of upsOutputNumPhases.
An entry containing information applicable to a
particular output.
particular output.
Indexes
upsParallelOutputApparentPowerTableIndex
| Column | Syntax | OID |
|---|---|---|
|
upsParallelOutputApparentPowerTableIndex
mandatory
The UPS parallel output identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.9.1.1 |
|
upsParallelOutputApparentPower
mandatory
The apparent power of each of UPS in kVA
when UPS are configured in parallel. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.9.1.2 |
.1.3.6.1.4.1.318.1.1.1.14.10
·
1 row entry
·
4 columns
Allows for diagnostics of parallel Circuit Breakers.
The diagnostics of Circuit Breaker.
Indexes
upsParallelDiagSubSysBreakerFrameIndex upsParallelDiagSubSysBreakerIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
upsParallelDiagSubSysBreakerFrameIndex
mandatory
The Parallel UPS index entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.10.1.1 |
||||||||
|
upsParallelDiagSubSysBreakerIndex
mandatory
The index of the Circuit Breaker.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.10.1.2 |
||||||||
|
upsParallelDiagSubSysBreakerStatus
mandatory
The status of the Circuit Breaker.
unknown(1) indicates the circuit breaker status is unknown. notInstalled(2) indicates the circuit breaker is not installed. opened(3) indicates the circuit breaker is opened. closed(4)… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.14.10.1.3 |
||||||||
|
upsParallelDiagSubSysBreakerName
mandatory
The name of Circuit Breaker.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.14.10.1.4 |
.1.3.6.1.4.1.318.1.1.1.14.12
·
1 row entry
·
2 columns
A list of output table entries. The number of entries is given by the value of upsParallelSysRemoteAddress.
An entry containing information applicable to a
particular output.
particular output.
Indexes
upsParallelOutputActivePowerTableIndex
| Column | Syntax | OID |
|---|---|---|
|
upsParallelOutputActivePowerTableIndex
mandatory
The UPS parallel output identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.12.1.1 |
|
upsParallelOutputActivePower
mandatory
The active power of each UPS in kW
when UPS devices are configured in parallel. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.12.1.2 |
.1.3.6.1.4.1.318.1.1.1.14.17
·
1 row entry
·
5 columns
A list of UPS table entries. The number of entries is given by the value of upsParallelSysUpsTableize.
An entry containing information applicable to a
particular UPS in parallel.
particular UPS in parallel.
Indexes
upsParallelSysUpsIndex
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsParallelSysUpsIndex
mandatory
The index to the Parallel System UPS table entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.14.17.1.1 |
||||||||||||||||||||||
|
upsParallelSysUpsName
mandatory
The UPS id as assigned by the system.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.14.17.1.2 |
||||||||||||||||||||||
|
upsParallelSysUpsAlarmStatus
mandatory
The alarm status of the UPS.
unknown(1) indicates the UPS status is unknown. normal(2) indicates UPS is functioning normally. informational(3) indicates informational alarm present in the UPS. warning(4) indicates warni… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.14.17.1.3 |
||||||||||||||||||||||
|
upsParallelSysUpsMode
mandatory
The current operating mode of the UPS. If the UPS is unable to
determine the state of the UPS, this variable is set to unknown(1). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.14.17.1.4 |
||||||||||||||||||||||
|
upsParallelSysUpsSerialNumber
mandatory
The Serial number of the UPS in parallel.
Equivalent to OID 1.3.6.1.4.1.318.1.1.1.1.2.3 (upsAdvIdentSerialNumber). |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.14.17.1.5 |
.1.3.6.1.4.1.318.1.1.1.15.5
·
1 row entry
·
2 columns
Battery frame layout position ID table.
A list of layout position IDs of battery frames.
Indexes
batteryFrameIndex
| Column | Syntax | OID |
|---|---|---|
|
batteryFrameIndex
mandatory
The index of the battery frame.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.15.5.1.1 |
|
batteryFramePositionID
mandatory
Defines the position ID of each of the battery frames in the row.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.15.5.1.2 |
.1.3.6.1.4.1.318.1.1.1.15.7
·
1 row entry
·
2 columns
Sidecar frame layout position ID table.
A list of sidecar frame layout position IDs.
Indexes
sideCarFrameIndex
| Column | Syntax | OID |
|---|---|---|
|
sideCarFrameIndex
mandatory
The index of the sidecar frame.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.15.7.1.1 |
|
sideCarFramePositionID
mandatory
Defines the position ID of each of the sidecar frames in the row.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.15.7.1.2 |
.1.3.6.1.4.1.318.1.1.1.15.9
·
1 row entry
·
2 columns
Power frame layout position ID table.
A list of power frame layout position IDs.
Indexes
powerFrameIndex
| Column | Syntax | OID |
|---|---|---|
|
powerFrameIndex
mandatory
The index of the power frame.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.15.9.1.1 |
|
powerFramePositionID
mandatory
Defines the position ID of each of the power frames in the row.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.15.9.1.2 |
.1.3.6.1.4.1.318.1.1.1.16.5
·
1 row entry
·
5 columns
Allows for getting status and settings for the ATS input sources. The number of entries is contained in the upsIntegratedATSSourceTableSize OID.
The input source status to get.
Indexes
upsIntegratedATSSourceIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
upsIntegratedATSSourceIndex
mandatory
The index to the input source entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.16.5.1.1 |
||||||
|
upsIntegratedATSSourceName
mandatory
The name of the input source. This OID is provided
for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.16.5.1.2 |
||||||
|
upsIntegratedATSSourceStatus
mandatory
Getting this variable will return the input source status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.16.5.1.3 |
||||||
|
upsIntegratedATSLineFailDelay
mandatory
The delay between a selected input source becoming bad, and the ATS switching away from that source.
This delay is used to make sure that the line has truly failed before the ATS will be switched. Specified in seconds. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.16.5.1.4 |
||||||
|
upsIntegratedATSLineStabilityDelay
mandatory
The delay between an unselected input source becoming good, and the ATS switching to that source.
This delay is used to make sure that the line has truly returned before the ATS will be switched. Specified in seconds. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.16.5.1.5 |
.1.3.6.1.4.1.318.1.1.1.17.1.2
·
1 row entry
·
6 columns
Provides status information on UPS DC outputs. The number of entries is contained in the upsDCOutputStatusTableSize OID.
The DC output.
Indexes
upsDCOutputStatusTableIndex
| Column | Syntax | OID |
|---|---|---|
|
upsDCOutputStatusTableIndex
mandatory
The index to the DC output status entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.17.1.2.1.1 |
|
upsDCOutputStatusVoltageNominal
mandatory
The desired voltage for this output in tenths of VDC.
When the output is on and there are no fault conditions, the actual voltage should be near the nominal. If not supported, return -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.17.1.2.1.2 |
|
upsDCOutputStatusCurrentRating
mandatory
The amount of current this output is able to supply in
tenths of amperes. If not supported, return -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.17.1.2.1.3 |
|
upsDCOutputStatusVoltage
mandatory
The voltage measured on this output in tenths of VDC.
If not supported, return -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.17.1.2.1.4 |
|
upsDCOutputStatusCurrent
mandatory
The current drawn by the load measured on this output
in tenths of amperes. If not supported, return -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.17.1.2.1.5 |
|
upsDCOutputStatusAbnormalConditions
mandatory
An ASCII string containing flags representing active
output faults. If the Network Card is unable to determine the state of the faults, this variable is set to 'UNKNOWN'. The flags are numbered 1 onward, … |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.17.1.2.1.6 |
.1.3.6.1.4.1.318.1.1.1.18.1.2
·
1 row entry
·
3 columns
Allows for access of individual relays.
The output relays to access.
Indexes
upsOutputRelayIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsOutputRelayIndex
mandatory
The index to the output relay entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.18.1.2.1.1 |
||||
|
upsOutputRelayState
mandatory
Getting this variable will return the output relay state.
1 - normal state 2 - abnormal state |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.18.1.2.1.2 |
||||
|
upsOutputRelayDetailedStatus
mandatory
An ASCII string containing the 16 flags representing
the status of the output relay. The flags are numbered from 1 to 16, and read from left to right. The bits are defined as follows: Flag … |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.1.18.1.2.1.3 |
.1.3.6.1.4.1.318.1.1.1.18.1.4
·
1 row entry
·
3 columns
Allows for access of individual relays.
The output relays to access.
Indexes
upsOutputRelayConfigIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsOutputRelayConfigIndex
mandatory
The index to the output relay entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.18.1.4.1.1 |
||||||||||||||||||||
|
upsOutputRelayConfigDelay
mandatory
Output relay delay 0 - 86400 seconds.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.18.1.4.1.2 |
||||||||||||||||||||
|
upsOutputRelayConfigCause
mandatory
This variable sets what causes the output relay state to change.
1 - none 2 - on battery power failure 3 - on battery power failure expect during peak period 4 - low battery while on battery 5 - alarm 6 - fault 7 - outp… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.18.1.4.1.3 |
.1.3.6.1.4.1.318.1.1.1.18.2.2
·
1 row entry
·
2 columns
Allows for access of individual contacts.
The input contacts to access.
Indexes
upsInputContactIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
upsInputContactIndex
mandatory
The index to the input contact entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.18.2.2.1.1 |
||||
|
upsInputContactState
mandatory
Getting this variable will return the input contact state.
1 - normal state 2 - abnormal state |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.18.2.2.1.2 |
.1.3.6.1.4.1.318.1.1.1.18.2.4
·
1 row entry
·
2 columns
Allows for access of individual contacts.
The input contacts to access.
Indexes
upsInputContactConfigIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
upsInputContactConfigIndex
mandatory
The index to the input contact entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.1.18.2.4.1.1 |
||||||||||||
|
upsInputContactConfigAction
mandatory
When the input contact changes state, this action occurs.
1 - none 2 - self test 3 - external alarm on 4 - external alarm off 5 - output off no delay 6 - output on |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.1.18.2.4.1.2 |
.1.3.6.1.4.1.318.1.1.2.2.2
·
1 row entry
·
5 columns
A list of contacts supported by the Measure-UPS.
A contact entry containing information for a given contact.
Indexes
contactNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
contactNumber
mandatory
An index identifying the contact on the Measure-UPS.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.2.2.2.1.1 |
||||||
|
normalState
mandatory
The normal operating position of the contact. If the normal
operating position cannot be set then it is controlled via the dip switch on the Measure-UPS and is therefore read-only. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.2.2.2.1.2 |
||||||
|
description
mandatory
The description of the purpose/use of the contact.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.2.2.2.1.3 |
||||||
|
monitoringStatus
mandatory
A flag indicating whether this contact is
monitored, or not. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.2.2.2.1.4 |
||||||
|
currentStatus
mandatory
This value indicates the current state of the contact.
If the contact is not in its normal state. This value is set to fault(2). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.2.2.2.1.5 |
.1.3.6.1.4.1.318.1.1.4.4.2
·
1 row entry
·
4 columns
Allows for control of individual outlet switches. The number of entries is contained in the sPDUOutletControlTableSize OID.
The outlets to control.
Indexes
sPDUOutletControlIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sPDUOutletControlIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.4.4.2.1.1 |
||||||||||||||
|
sPDUOutletPending
mandatory
Reports whether the current outlet has a pending command.
If the commandPendingUnknown (3) value is returned, all devices powered by the PDU should be shut down. The PDU's power should then be cycled to c… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.4.4.2.1.2 |
||||||||||||||
|
sPDUOutletCtl
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the outletOn (1) value will be returned. If the outlet is off, the outletOff (2) value will be returned. If the state of the outlet… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.4.4.2.1.3 |
||||||||||||||
|
sPDUOutletCtlName
mandatory
The name of the outlet. Maximum size is 20 characters.
This OID is provided for informational purposes only. This value is set by the sPDUOutletName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.4.4.2.1.4 |
.1.3.6.1.4.1.318.1.1.4.5.2
·
1 row entry
·
5 columns
The list of outlets to configure. The number of entries is defined by the sPDUOutletConfigTableSize OID.
The outlets to control.
Indexes
sPDUOutletConfigIndex
| Column | Syntax | OID |
|---|---|---|
|
sPDUOutletConfigIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.4.5.2.1.1 |
|
sPDUOutletPowerOnTime
mandatory
The amount of time (in seconds) the outlet will delay
powering on when the MasterSwitch is powered on. Allowed values are: -1 never power on automatically. 0 power on with the Master Switc… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.4.5.2.1.2 |
|
sPDUOutletName
mandatory
The name of the outlet. Maximum size is 20 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.4.5.2.1.3 |
|
sPDUOutletPowerOffTime
mandatory
The amount of time (in seconds) the outlet will delay
powering off. Allowed values are: -1 never power off automatically. 0 power off with the MasterSwitch. 15 power off 15 seconds after b… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.4.5.2.1.4 |
|
sPDUOutletRebootDuration
mandatory
During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait, in seconds, after turning the power off, at the start of the sequence, before turning power back on, at the en… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.4.5.2.1.5 |
.1.3.6.1.4.1.318.1.1.5.1.2
·
1 row entry
·
7 columns
Allows for query of the individual MasterSwitch VMs. The number of entries is contained in the sPDUIdentVMTableSize OID.
The MasterSwitch VMs to query.
Indexes
sPDUIdentVMIndex
| Column | Syntax | OID |
|---|---|---|
|
sPDUIdentVMIndex
mandatory
The index to the MasterSwitch VM entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.1.2.1.1 |
|
sPDUIdentNameVM
mandatory
A 23-character string identifying the
MasterSwitch VM. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.1.2.1.2 |
|
sPDUIdentHardwareRevVM
mandatory
The hardware version of the MasterSwitch VM.
This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.1.2.1.3 |
|
sPDUIdentFirmwareRevVM
mandatory
An 6-character ID string identifying the MasterSwitch VM
firmware version. This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.1.2.1.4 |
|
sPDUIdentDateOfManufactureVM
mandatory
The date when the MasterSwitch VM was manufactured in mm/dd/yyyy format.
This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.1.2.1.5 |
|
sPDUIdentModelNumberVM
mandatory
A 17-character string identifying the model number of
the MasterSwitch VM. This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.1.2.1.6 |
|
sPDUIdentSerialNumberVM
mandatory
A 17-character string identifying the serial number of
the MasterSwitch VM. This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.1.2.1.7 |
.1.3.6.1.4.1.318.1.1.5.2.2
·
1 row entry
·
3 columns
Allows for control of the individual MasterSwitch VMs. The number of entries is contained in the sPDUMasterControlVMTableSize OID.
The MasterSwitch VMs to control.
Indexes
sPDUMasterControlVMIndex
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sPDUMasterControlVMIndex
mandatory
The index to the MasterSwitch VM entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.2.2.1.1 |
||||||||||||||||||||||
|
sPDUMasterControlVMName
mandatory
The name of the MasterSwitch VM. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigVMName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.2.2.1.2 |
||||||||||||||||||||||
|
sPDUMasterControlVMCommand
mandatory
Setting this OID to immediateAllOnVM (2) will turn all outlets
on immediately. Setting this OID to immediateAllOffVM (3) will turn all outlets off immediately. Setting this OID to immediate… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.5.2.2.1.3 |
.1.3.6.1.4.1.318.1.1.5.3.2
·
1 row entry
·
7 columns
Allows for configuration of the individual MasterSwitch VMs. The number of entries is contained in the sPDUMasterConfigVMTableSize OID.
The MasterSwitch VMs to configure.
Indexes
sPDUMasterConfigVMIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
sPDUMasterConfigVMIndex
mandatory
The index to the MasterSwitch VM entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.3.2.1.1 |
||||||
|
sPDUMasterConfigVMName
mandatory
The name of the MasterSwitch VM. Maximum size is 23 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.3.2.1.2 |
||||||
|
sPDUMasterConfigVMColdstartDelay
mandatory
The amount of delay, in seconds, between when
power is provided to the MasterSwitch VM and when the MasterSwitch VM provides basic master power to the outlets. Allowed values are: -1 never … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.3.2.1.3 |
||||||
|
sPDUMasterConfigVMAudioAlarmActivated
mandatory
Setting this OID to audioAlarmActiveNever (1) will disable
the audio alarm on the MasterSwitch VM. Setting this OID to audioAlarmActiveOnOverload (2) will activate the audio alarm on the MasterSwitch VM w… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.5.3.2.1.4 |
||||||
|
sPDUMasterConfigVMHighLoadWarningThreshold
mandatory
A threshold that indicates the power consumption of
the load is nearing an overload condition. It is represented as a percentage of full load. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.5.3.2.1.5 |
||||||
|
sPDUMasterConfigVMLowLoadWarningThreshold
mandatory
A threshold that indicates the power consumption of
the load is nearing a low consumption condition. It is represented as a percentage of full load. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.5.3.2.1.6 |
||||||
|
sPDUMasterConfigVMOverloadRestriction
mandatory
This OID controls the behavior of the MasterSwitch VM
when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will always all… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.5.3.2.1.7 |
.1.3.6.1.4.1.318.1.1.5.4.2
·
1 row entry
·
9 columns
Allows for gathering of status from the individual MasterSwitch VMs. The number of entries is contained in the sPDUMasterStatusVMTableSize OID.
The MasterSwitch VMs to gather status from.
Indexes
sPDUMasterStatusVMIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sPDUMasterStatusVMIndex
mandatory
The index to the MasterSwitch VM entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.4.2.1.1 |
||||
|
sPDUMasterStatusVMName
mandatory
The name of the MasterSwitch VM. Maximum size is 23 characters.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.4.2.1.2 |
||||
|
sPDUMasterStatusVMCommandPending
mandatory
Getting this OID will return commandPendingMasterTrueVM (1)
if the MasterSwitch VM has a pending command on any of its outlets. commandPendingMasterFalseVM (2) will be returned if there are no pending com… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.5.4.2.1.3 |
||||
|
sPDUMasterStatusVMOverloadCondition
mandatory
Getting this OID will return overloadConditionTrueVM (1)
if the sPDUMasterConfigVMHighLoadWarningThreshold OID is violated. overloadConditionFalseVM (2) will be returned if the sPDUMasterConfigVMHighLoadW… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.5.4.2.1.4 |
||||
|
sPDUMasterStatusVMLowLoadCondition
mandatory
Getting this OID will return lowLoadConditionTrueVM (1)
if the sPDUMasterConfigVMLowLoadWarningThreshold OID is violated. lowLoadConditionFalseVM (2) will be returned if the sPDUMasterConfigVMHighLoadWarn… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.5.4.2.1.5 |
||||
|
sPDUMasterStatusVMCurrentLoad
mandatory
Getting this OID will return the total amount of power
being consumed by the load. It is represented as a percentage of full load. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.4.2.1.6 |
||||
|
sPDUMasterStatusVMMaxLoad
mandatory
Getting this OID will return the total amount of power
that this MasterSwitch VM can provide. It is represented in Amps. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.4.2.1.7 |
||||
|
sPDUMasterStatusVMOutletCount
mandatory
Getting this OID will return the number of controllable
outlets for this MasterSwitch VM. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.4.2.1.8 |
||||
|
sPDUMasterStatusVMRebootDuration
mandatory
Getting this OID will return the largest
sPDUOutletConfigVMRebootDuration OID time for this MasterSwitch VM. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.4.2.1.9 |
.1.3.6.1.4.1.318.1.1.5.5.1
·
1 row entry
·
5 columns
Allows for control of individual outlet switches. The number of entries is contained in the sPDUMasterStatusOutletCount OID.
The outlets to control.
Indexes
sPDUOutletControlVMIndex sPDUOutletControlVMOutletIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sPDUOutletControlVMIndex
mandatory
The index to the MasterSwitch VM.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.5.1.1.1 |
||||||||||||||
|
sPDUOutletControlVMName
mandatory
The name of the MasterSwitch VM. Maximum size is 23 characters.
This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.5.1.1.2 |
||||||||||||||
|
sPDUOutletControlVMOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.5.1.1.3 |
||||||||||||||
|
sPDUOutletControlVMOutletName
mandatory
The name of the outlet. Maximum size is 23 characters.
This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.5.1.1.4 |
||||||||||||||
|
sPDUOutletControlVMOutletCommand
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the immediateOnVM (1) value will be returned. If the outlet is off, the immediateOffVM (2) value will be returned. S… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.5.5.1.1.5 |
.1.3.6.1.4.1.318.1.1.5.6.1
·
1 row entry
·
7 columns
Allows for configuration of individual outlets. The number of entries is contained in the sPDUMasterStatusOutletCount OID.
The outlets to configure.
Indexes
sPDUOutletConfigVMIndex sPDUOutletConfigVMOutletIndex
| Column | Syntax | OID |
|---|---|---|
|
sPDUOutletConfigVMIndex
mandatory
The index to the MasterSwitch VM.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.6.1.1.1 |
|
sPDUOutletConfigVMName
mandatory
The name of the MasterSwitch VM. Maximum size is 23 characters.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.6.1.1.2 |
|
sPDUOutletConfigVMOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.6.1.1.3 |
|
sPDUOutletConfigVMOutletName
mandatory
The name of the outlet. Maximum size is 23 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.6.1.1.4 |
|
sPDUOutletConfigVMPowerOnTime
mandatory
The amount of time (in seconds) the outlet will delay
powering on at coldstart or when a command that requires a turn-on delay is issued. Allowed values are: -1 never power on. 0 power on … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.6.1.1.5 |
|
sPDUOutletConfigVMPowerOffTime
mandatory
The amount of time (in seconds) the outlet will delay
powering off when a command that requires a turn-off delay is issued. Allowed values are: -1 never power off automatical… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.6.1.1.6 |
|
sPDUOutletConfigVMRebootDuration
mandatory
During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait, in seconds, after turning the power off, at the start of the sequence, before turning power back on, at the en… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.6.1.1.7 |
.1.3.6.1.4.1.318.1.1.5.7.1
·
1 row entry
·
6 columns
Allows for getting of status of individual outlets. The number of entries is contained in the sPDUMasterStatusOutletCount OID.
The outlets to gather status from.
Indexes
sPDUOutletStatusVMIndex sPDUOutletStatusVMOutletIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sPDUOutletStatusVMIndex
mandatory
The index to the MasterSwitch VM.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.7.1.1.1 |
||||
|
sPDUOutletStatusVMName
mandatory
The name of the MasterSwitch VM. Maximum size is 23 characters.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.7.1.1.2 |
||||
|
sPDUOutletStatusVMOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.5.7.1.1.3 |
||||
|
sPDUOutletStatusVMOutletName
mandatory
The name of the outlet. Maximum size is 23 characters.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.5.7.1.1.4 |
||||
|
sPDUOutletStatusVMOutletState
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the outletStatusOnVM (1) value will be returned. If the outlet is off, the outletStatusOffVM (2) value will be returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.5.7.1.1.5 |
||||
|
sPDUOutletStatusVMCommandPending
mandatory
Getting this variable will return the command pending
state of the outlet. If a command is pending on the outlet, the outletStatusVMCommandPending (1) value will be returned. If there is not a command pending on the out… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.5.7.1.1.6 |
.1.3.6.1.4.1.318.1.1.6.1.2
·
1 row entry
·
7 columns
Allows for query of the individual MasterSwitch pluses. The number of entries is contained in the sPDUIdentMSPTableSize OID.
The MasterSwitch pluses to query.
Indexes
sPDUIdentMSPIndex
| Column | Syntax | OID |
|---|---|---|
|
sPDUIdentMSPIndex
mandatory
The index to the MasterSwitch plus entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.1.2.1.1 |
|
sPDUIdentNameMSP
mandatory
The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.1.2.1.2 |
|
sPDUIdentHardwareRevMSP
mandatory
The hardware version of the MasterSwitch plus.
This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.1.2.1.3 |
|
sPDUIdentFirmwareRevMSP
mandatory
An 6-character ID string identifying the MasterSwitch plus
firmware version. This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.1.2.1.4 |
|
sPDUIdentDateOfManufactureMSP
mandatory
The date when the MasterSwitch plus was manufactured in mm/dd/yyyy format.
This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.1.2.1.5 |
|
sPDUIdentModelNumberMSP
mandatory
A 17-character string identifying the model number of
the MasterSwitch plus. This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.1.2.1.6 |
|
sPDUIdentSerialNumberMSP
mandatory
A 17-character string identifying the serial number of
the MasterSwitch plus. This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.1.2.1.7 |
.1.3.6.1.4.1.318.1.1.6.2.2
·
1 row entry
·
3 columns
Allows for control of the individual MasterSwitch pluses. The number of entries is contained in the sPDUMasterControlMSPTableSize OID.
The MasterSwitch pluses to control.
Indexes
sPDUMasterControlMSPIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sPDUMasterControlMSPIndex
mandatory
The index to the MasterSwitch plus entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.2.2.1.1 |
||||||||||||||||||||
|
sPDUMasterControlMSPName
mandatory
The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.2.2.1.2 |
||||||||||||||||||||
|
sPDUMasterControlMSPCommand
mandatory
Setting this OID to immediateAllOnMSP (2) will turn all outlets
on immediately. Setting this OID to sequencedAllOnMSP (3) will turn all outlets on as defined by each outlet's sPDUOutletConfigMSPPowerOnDel… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.2.2.1.3 |
.1.3.6.1.4.1.318.1.1.6.3.2
·
1 row entry
·
4 columns
Allows for configuration of the individual MasterSwitch pluses. The number of entries is contained in the sPDUMasterConfigMSPTableSize OID.
The MasterSwitch pluses to configure.
Indexes
sPDUMasterConfigMSPIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sPDUMasterConfigMSPIndex
mandatory
The index to the MasterSwitch plus entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.3.2.1.1 |
||||
|
sPDUMasterConfigMSPName
mandatory
The name of the MasterSwitch plus. Maximum size is 23 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.3.2.1.2 |
||||
|
sPDUMasterConfigMSPPowerOnTimeDelay
mandatory
The amount of delay, in seconds, between when
power is provided to the MasterSwitch plus and when the MasterSwitch plus provides basic master power to the outlets. Allowed values are: 0 - 9… |
Integer32r/w Constraints: range: 0-9999 |
.1.3.6.1.4.1.318.1.1.6.3.2.1.3 |
||||
|
sPDUMasterConfigMSPManualButton
mandatory
Setting this OID to manualButtonDisabled (1) will disable
the manual button on the MasterSwitch plus. Setting this OID to manualButtonEnabled (2) will enable the manual button on the MasterSwitch plus. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.3.2.1.4 |
.1.3.6.1.4.1.318.1.1.6.4.2
·
1 row entry
·
3 columns
Allows for gathering of status from the individual MasterSwitch pluses. The number of entries is contained in the sPDUMasterStatusMSPTableSize OID.
The MasterSwitch pluses to gather status from.
Indexes
sPDUMasterStatusMSPIndex
| Column | Syntax | OID |
|---|---|---|
|
sPDUMasterStatusMSPIndex
mandatory
The index to the MasterSwitch plus entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.4.2.1.1 |
|
sPDUMasterStatusMSPName
mandatory
The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.4.2.1.2 |
|
sPDUMasterStatusMSPOutletCount
mandatory
Getting this OID will return the number of controllable
outlets for this MasterSwitch plus. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.4.2.1.3 |
.1.3.6.1.4.1.318.1.1.6.5.1
·
1 row entry
·
5 columns
Allows for control of individual outlet switches. The number of entries is contained in the sPDUMasterStatusMSPOutletCount OID.
The outlets to control.
Indexes
sPDUOutletControlMSPIndex sPDUOutletControlMSPOutletIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sPDUOutletControlMSPIndex
mandatory
The index to the MasterSwitch plus.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.5.1.1.1 |
||||||||||||||||
|
sPDUOutletControlMSPName
mandatory
The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.5.1.1.2 |
||||||||||||||||
|
sPDUOutletControlMSPOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.5.1.1.3 |
||||||||||||||||
|
sPDUOutletControlMSPOutletName
mandatory
The name of the outlet. The maximum size is
23 characters. The name is set by using the sPDUOutletConfigMSPallOutletName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.5.1.1.4 |
||||||||||||||||
|
sPDUOutletControlMSPOutletCommand
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the immediateOnMSP (1) value will be returned. If the outlet is off, the immediateOffMSP (3) value will be returned. Setting this v… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.5.1.1.5 |
.1.3.6.1.4.1.318.1.1.6.6.1.1
·
1 row entry
·
5 columns
Allows for configuration of individual outlets. The number of entries is contained in the sPDUMasterStatusMSPOutletCount OID.
The outlets to configure.
Indexes
sPDUOutletConfigMSPallIndex sPDUOutletConfigMSPallOutletIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sPDUOutletConfigMSPallIndex
mandatory
The index to the MasterSwitch plus.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.6.1.1.1.1 |
||||
|
sPDUOutletConfigMSPallName
mandatory
The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.6.1.1.1.2 |
||||
|
sPDUOutletConfigMSPallOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.6.1.1.1.3 |
||||
|
sPDUOutletConfigMSPallOutletName
mandatory
The name of the outlet. Maximum size is 23 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.6.1.1.1.4 |
||||
|
sPDUOutletConfigMSPallOutletCtrlMode
mandatory
Setting this OID to modeGracefulShutdown (1) will put this
outlet into the Graceful Shutdown control mode. Setting this OID to modeAnnunciator (2) will put this outlet into the Annunciator control mode. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.1.1.1.5 |
.1.3.6.1.4.1.318.1.1.6.6.2.1
·
1 row entry
·
13 columns
Allows for configuration of individual outlets. The number of entries is contained in the sPDUMasterStatusMSPOutletCount OID.
The outlets to configure.
Indexes
sPDUOutletConfigMSPgsIndex sPDUOutletConfigMSPgsOutletIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sPDUOutletConfigMSPgsIndex
mandatory
The index to the MasterSwitch plus.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.1 |
||||
|
sPDUOutletConfigMSPgsName
mandatory
The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.2 |
||||
|
sPDUOutletConfigMSPgsOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.3 |
||||
|
sPDUOutletConfigMSPgsOutletName
mandatory
The name of the outlet. The maximum size is
23 characters. The name is set by using the sPDUOutletConfigMSPallOutletName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.4 |
||||
|
sPDUOutletConfigMSPgsOutletCtrlMode
mandatory
The Control Mode of the outlet.
This OID is provided for informational purposes only. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.5 |
||||
|
sPDUOutletConfigMSPgsDeviceConfirm
mandatory
Setting this OID to deviceConfirmNo (1) cause the outlet to
NOT wait for device confirmation while performing graceful operations. Setting this OID to deviceConfirmYes (2) cause the outlet to wait for dev… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.6 |
||||
|
sPDUOutletConfigMSPgsLowBattWarning
mandatory
The amount of delay, in 6 second intervals, between
when the UPS goes on battery and the power down sequence for the outlet is initiated. Allowed values are: -2 - Never initiate the power d… |
Integer32r/w Constraints: range: -2-9999 |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.7 |
||||
|
sPDUOutletConfigMSPgsLowBattMult
mandatory
Only applicable if sPDUOutletConfigMSPgsLowBattWarning OID is
set to -1 (On Runtime Remaining). Allows you to set the value to stagger the shutdown sequence of the outlets. 1 provides the longest delay (t… |
Integer32r/w Constraints: range: 1-7 |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.8 |
||||
|
sPDUOutletConfigMSPgsRestartDelay
mandatory
The amount of delay, in 6 minute intervals, between
when the outlet is turned off and the outlet is turned back on when performing a Graceful Shutdown. Allowed values are: -1 - Never turn o… |
Integer32r/w Constraints: range: -1-9999 |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.9 |
||||
|
sPDUOutletConfigMSPgsPowerOnDelay
mandatory
The amount of delay, in seconds, between the UPS entering
normal (on-line) state and the outlet being powered on. Allowed values are: -1 - Remain Off when the UPS enters the on-line state. … |
Integer32r/w Constraints: range: -1-9999 |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.10 |
||||
|
sPDUOutletConfigMSPgsPowerOffDelay
mandatory
The amount of delay, in seconds, between when the server
shuts down and the outlet is powered off. Allowed values are: 0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs). |
Integer32r/w Constraints: range: 0-9999 |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.11 |
||||
|
sPDUOutletConfigMSPgsBattCapThresh
mandatory
The minimum battery capacity, as a percent (0-100%), required
of the UPS before an outlet will be allowed to power on. Allowed values are: 0 - 100 percent. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.12 |
||||
|
sPDUOutletConfigMSPgsRebootDuration
mandatory
The amount of delay, in seconds, from outlet off until
outlet on during a reboot. Allowed values are: 0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs). |
Integer32r/w Constraints: range: 0-9999 |
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.13 |
.1.3.6.1.4.1.318.1.1.6.6.3.1
·
1 row entry
·
7 columns
Allows for configuration of individual outlets. The number of entries is contained in the sPDUMasterStatusMSPOutletCount OID.
The outlets to configure.
Indexes
sPDUOutletConfigMSPannunIndex sPDUOutletConfigMSPannunOutletIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sPDUOutletConfigMSPannunIndex
mandatory
The index to the MasterSwitch plus.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.6.3.1.1.1 |
||||
|
sPDUOutletConfigMSPannunName
mandatory
The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.6.3.1.1.2 |
||||
|
sPDUOutletConfigMSPannunOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.6.3.1.1.3 |
||||
|
sPDUOutletConfigMSPannunOutletName
mandatory
The name of the outlet. The maximum size is
23 characters. The name is set by using the sPDUOutletConfigMSPallOutletName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.6.3.1.1.4 |
||||
|
sPDUOutletConfigMSPannunOutletCtrlMode
mandatory
The Control Mode of the outlet.
This OID is provided for informational purposes only. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.3.1.1.5 |
||||
|
sPDUOutletConfigMSPannunInitialState
mandatory
Setting this OID to initialStateOff (1) causes the outlet
to default to off when in the non-alarmed condition. Setting this OID to initialStateOn (2) causes the outlet to default to on when in the non-ala… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.3.1.1.6 |
||||
|
sPDUOutletConfigMSPannunAlarmActionDly
mandatory
The amount of time, in seconds, that an enabled Measure-UPS
alarm must be asserted before an alarm condition is recognized. Allowed values are: 0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs… |
Integer32r/w Constraints: range: 0-9999 |
.1.3.6.1.4.1.318.1.1.6.6.3.1.1.7 |
.1.3.6.1.4.1.318.1.1.6.6.4.1
·
1 row entry
·
16 columns
Allows for configuration of individual outlets. The number of entries is contained in the sPDUMasterStatusMSPOutletCount OID.
The outlets to configure.
Indexes
sPDUOutletConfigMSPmupsIndex sPDUOutletConfigMSPmupsOutletIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sPDUOutletConfigMSPmupsIndex
mandatory
The index to the MasterSwitch plus.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.1 |
||||
|
sPDUOutletConfigMSPmupsName
mandatory
The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.2 |
||||
|
sPDUOutletConfigMSPmupsOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.3 |
||||
|
sPDUOutletConfigMSPmupsOutletName
mandatory
The name of the outlet. The maximum size is
23 characters. The name is set by using the sPDUOutletConfigMSPallOutletName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.4 |
||||
|
sPDUOutletConfigMSPmupsZone1
mandatory
Setting this OID to disableAlarm (1) disables the
Zone 1 alarm for this outlet. Setting this OID to enableAlarm (2) enables the Zone 1 alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.5 |
||||
|
sPDUOutletConfigMSPmupsZone2
mandatory
Setting this OID to disableAlarm (1) disables the
Zone 2 alarm for this outlet. Setting this OID to enableAlarm (2) enables the Zone 2 alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.6 |
||||
|
sPDUOutletConfigMSPmupsZone3
mandatory
Setting this OID to disableAlarm (1) disables the
Zone 3 alarm for this outlet. Setting this OID to enableAlarm (2) enables the Zone 3 alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.7 |
||||
|
sPDUOutletConfigMSPmupsZone4
mandatory
Setting this OID to disableAlarm (1) disables the
Zone 4 alarm for this outlet. Setting this OID to enableAlarm (2) enables the Zone 4 alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.8 |
||||
|
sPDUOutletConfigMSPmupsP1LowHum
mandatory
Setting this OID to disableAlarm (1) disables the
Probe 1 low humidity alarm for this outlet. Setting this OID to enableAlarm (2) enables the Probe 1 low humidity alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.9 |
||||
|
sPDUOutletConfigMSPmupsP1HiHum
mandatory
Setting this OID to disableAlarm (1) disables the
Probe 1 high humidity alarm for this outlet. Setting this OID to enableAlarm (2) enables the Probe 1 high humidity alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.10 |
||||
|
sPDUOutletConfigMSPmupsP1LowTemp
mandatory
Setting this OID to disableAlarm (1) disables the
Probe 1 low temperature alarm for this outlet. Setting this OID to enableAlarm (2) enables the Probe 1 low temperature alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.11 |
||||
|
sPDUOutletConfigMSPmupsP1HiTemp
mandatory
Setting this OID to disableAlarm (1) disables the
Probe 1 high temperature alarm for this outlet. Setting this OID to enableAlarm (2) enables the Probe 1 high temperature alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.12 |
||||
|
sPDUOutletConfigMSPmupsP2LowHum
mandatory
Setting this OID to disableAlarm (1) disables the
Probe 2 low humidity alarm for this outlet. Setting this OID to enableAlarm (2) enables the Probe 2 low humidity alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.13 |
||||
|
sPDUOutletConfigMSPmupsP2HiHum
mandatory
Setting this OID to disableAlarm (1) disables the
Probe 2 high humidity alarm for this outlet. Setting this OID to enableAlarm (2) enables the Probe 2 high humidity alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.14 |
||||
|
sPDUOutletConfigMSPmupsP2LowTemp
mandatory
Setting this OID to disableAlarm (1) disables the
Probe 2 low temperature alarm for this outlet. Setting this OID to enableAlarm (2) enables the Probe 2 low temperature alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.15 |
||||
|
sPDUOutletConfigMSPmupsP2HiTemp
mandatory
Setting this OID to disableAlarm (1) disables the
Probe 2 high temperature alarm for this outlet. Setting this OID to enableAlarm (2) enables the Probe 2 high temperature alarm for this outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.6.4.1.1.16 |
.1.3.6.1.4.1.318.1.1.6.7.1
·
1 row entry
·
7 columns
Allows for getting of status of individual outlets. The number of entries is contained in the sPDUMasterStatusOutletCount OID.
The outlets to gather status from.
Indexes
sPDUOutletStatusMSPIndex sPDUOutletStatusMSPOutletIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sPDUOutletStatusMSPIndex
mandatory
The index to the MasterSwitch MSP.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.7.1.1.1 |
||||
|
sPDUOutletStatusMSPName
mandatory
The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.7.1.1.2 |
||||
|
sPDUOutletStatusMSPOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.6.7.1.1.3 |
||||
|
sPDUOutletStatusMSPOutletName
mandatory
The name of the outlet. The maximum size is
23 characters. The name is set by using the sPDUOutletConfigMSPallOutletName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.6.7.1.1.4 |
||||
|
sPDUOutletStatusMSPOutletState
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the outletStatusMSPOn (1) value will be returned. If the outlet is off, the outletStatusMSPOff (2) value will be returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.7.1.1.5 |
||||
|
sPDUOutletStatusMSPCommandPending
mandatory
Getting this variable will return the command pending
state of the outlet. If a command is pending on the outlet, the outletStatusMSPCommandPending (1) value will be returned. If there is not a command pending on the ou… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.7.1.1.6 |
||||
|
sPDUOutletStatusMSPOutletCtrlMode
mandatory
The Control Mode of the outlet.
This OID is provided for informational purposes only. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.6.7.1.1.7 |
.1.3.6.1.4.1.318.1.1.7.1.1.2
·
1 row entry
·
2 columns
Allows for accessing description records of the powerplant. The number of entries is contained in the dm3IdentSysDescriptionTableSize OID.
The powerplant description record to reference.
Indexes
dm3IdentSysDescriptionIndex
| Column | Syntax | OID |
|---|---|---|
|
dm3IdentSysDescriptionIndex
mandatory
The index to the DC powerplant description record.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.1.1.2.1.1 |
|
dm3IdentSysDescriptionText
mandatory
A 16 character text field describing the DC power plant device.
This field can be configured from the dm3ConfigSysDescriptionText OID. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.1.1.2.1.2 |
.1.3.6.1.4.1.318.1.1.7.2.1.2
·
1 row entry
·
2 columns
Allows for accessing description records of the powerplant. The number of entries is contained in the dm3ConfigSysDescriptionTableSize OID.
The powerplant description record to reference.
Indexes
dm3ConfigSysDescriptionIndex
| Column | Syntax | OID |
|---|---|---|
|
dm3ConfigSysDescriptionIndex
mandatory
The index to the DC powerplant description record.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.1.2.1.1 |
|
dm3ConfigSysDescriptionText
mandatory
16 character text field describing the DC power plant device.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.2.1.2.1.2 |
.1.3.6.1.4.1.318.1.1.7.2.2.2
·
1 row entry
·
7 columns
Allows for accessing settings of the LVDs. The number of entries is contained in the dm3ConfigLVDTableSize OID.
The LVD to configure.
Indexes
dm3ConfigLVDIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dm3ConfigLVDIndex
mandatory
The index to the DC powerplant LVD.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.2.2.1.1 |
||||||||||||||||||
|
dm3ConfigLVDName
mandatory
The name of the LVD. The maximum value is 16 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.2.2.2.1.2 |
||||||||||||||||||
|
dm3ConfigLVDEnable
mandatory
This OID is used to control and indicate if the LVD is on or off.
Setting this OID to enabledYes (1) will enable (turn on) the LVD. Setting this OID to enabledNo (2) will disable (turn off) the LVD. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.2.2.2.1.3 |
||||||||||||||||||
|
dm3ConfigLVDTripThresh
mandatory
LVD Trip threshold. If voltage exceeds threshold, the LVD will trip.
Values are represented in thousandths of Volts (mV). Attempts to set the value above or below the acceptable range of the powerplant … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.2.2.1.4 |
||||||||||||||||||
|
dm3ConfigLVDResetThresh
mandatory
LVD Reset threshold. If voltage exceeds threshold, the LVD will reset.
Values are represented in thousandths of Volts (mV). Attempts to set the value above or below the acceptable range of the powerplant… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.2.2.1.5 |
||||||||||||||||||
|
dm3ConfigLVDOpenAlarm
mandatory
For the LVD Open Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an alarm condition. Setting this OID to al… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.2.2.2.1.6 |
||||||||||||||||||
|
dm3ConfigLVDHWAlarm
mandatory
For the LVD Hardware Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an alarm condition. Setting this OID t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.2.2.2.1.7 |
.1.3.6.1.4.1.318.1.1.7.2.5.1.2
·
1 row entry
·
4 columns
Allows for accessing settings of the Output Relays. The number of entries is contained in the dm3ConfigOutRlyTableSize OID.
The output relay to configure.
Indexes
dm3ConfigOutRlyIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dm3ConfigOutRlyIndex
mandatory
The index to the DC powerplant output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.5.1.2.1.1 |
||||||||||||||||||
|
dm3ConfigOutRlyName
mandatory
The name of the output relay. The maximum value is 16 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.2.5.1.2.1.2 |
||||||||||||||||||
|
dm3ConfigOutRlyDelay
mandatory
Output Relay Delay. This OID represents the time delay from the initiation of an
output relay action to when the output relay action does occur. If the alarm condition disappears before the end of the delay, no action… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.5.1.2.1.3 |
||||||||||||||||||
|
dm3ConfigOutRlyAlarm
mandatory
Output Relay Alarm. This setting indicates what action to perform in the event of
an output relay alarm condition; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this OID to a… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.2.5.1.2.1.4 |
.1.3.6.1.4.1.318.1.1.7.2.5.2.2
·
1 row entry
·
4 columns
Allows for accessing settings of the Input Relays. The number of entries is contained in the dm3ConfigInRlyTableSize OID.
The input relay to configure.
Indexes
dm3ConfigInRlyIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dm3ConfigInRlyIndex
mandatory
The index to the DC powerplant input relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.5.2.2.1.1 |
||||||||||||||||||
|
dm3ConfigInRlyName
mandatory
The name of the input relay. The maximum value is 16 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.2.5.2.2.1.2 |
||||||||||||||||||
|
dm3ConfigInRlyDelay
mandatory
Input Relay Delay. This OID represents the time delay from the initiation of an
input relay action to when the input relay action does occur. If the alarm condition disappears before the end of the delay, no action w… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.5.2.2.1.3 |
||||||||||||||||||
|
dm3ConfigInRlyAlarm
mandatory
Input Relay Alarm. This setting indicates what action to perform in the event of
an input relay alarm condition; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this OID to ala… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.2.5.2.2.1.4 |
.1.3.6.1.4.1.318.1.1.7.2.6.1.2
·
1 row entry
·
3 columns
Allows for accessing settings of the circuit breakers. The number of entries is contained in the dm3ConfigBreakersTableSize OID.
The circuit breaker to configure.
Indexes
dm3ConfigBreakersIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dm3ConfigBreakersIndex
mandatory
The index to the DC powerplant circuit breaker.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.6.1.2.1.1 |
||||||||||||||||||
|
dm3ConfigBreakersName
mandatory
The name of the circuit breaker. The maximum value is 16 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.2.6.1.2.1.2 |
||||||||||||||||||
|
dm3ConfigBreakersAlarm
mandatory
Circuit Breaker Alarm. This setting indicates what action to perform in the event of
a circuit breaker alarm condition; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this OID… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.2.6.1.2.1.3 |
.1.3.6.1.4.1.318.1.1.7.2.6.2.2
·
1 row entry
·
3 columns
Allows for accessing settings of the Fuses. The number of entries is contained in the dm3ConfigFusesTableSize OID.
The fuse to configure.
Indexes
dm3ConfigFusesIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dm3ConfigFusesIndex
mandatory
The index to the DC powerplant fuse.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.2.6.2.2.1.1 |
||||||||||||||||||
|
dm3ConfigFusesName
mandatory
The name of the fuse. The maximum value is 16 characters.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.2.6.2.2.1.2 |
||||||||||||||||||
|
dm3ConfigFusesAlarm
mandatory
Fuses Alarm. This setting indicates what action to perform in the event of
a Fuse alarm condition; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this OID to alarmRelay1 (2) c… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.2.6.2.2.1.3 |
.1.3.6.1.4.1.318.1.1.7.3.2.2
·
1 row entry
·
2 columns
Allows for accessing system alarms. The number of entries is contained in the dm3StatusAlarmsTableSize OID.
The alarm to display.
Indexes
dm3StatusAlarmsIndex
| Column | Syntax | OID |
|---|---|---|
|
dm3StatusAlarmsIndex
mandatory
The index of the system alarm.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.2.2.1.1 |
|
dm3StatusAlarmsText
mandatory
The 16 character text describing the active alarm condition.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.3.2.2.1.2 |
.1.3.6.1.4.1.318.1.1.7.3.5.2
·
1 row entry
·
4 columns
Allows for accessing settings of the LVDs. The number of entries is contained in the dm3StatusLVDTableSize OID.
The LVD to gather status from.
Indexes
dm3StatusLVDIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dm3StatusLVDIndex
mandatory
The index to the DC powerplant LVD.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.5.2.1.1 |
||||
|
dm3StatusLVDName
mandatory
The name of the LVD. The maximum size is
16 characters. The name is set by using the dm3ConfigLVDName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.3.5.2.1.2 |
||||
|
dm3StatusLVDState
mandatory
Getting this OID will return statusClosed (1) if the LVD is closed.
statusOpened (2) will be returned if the LVD is opened. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.5.2.1.3 |
||||
|
dm3StatusLVDHwFault
mandatory
Getting this OID will return statusFault (1) if the LVD is faulted.
statusNofault (2) will be returned if the LVD is not faulted. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.5.2.1.4 |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2
·
1 row entry
·
16 columns
Allows for accessing settings of the rectifiers. The number of entries is contained in the dm3StatusRectTableSize OID.
The rectifier to gather status from.
Indexes
dm3StatusRectIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dm3StatusRectIndex
mandatory
The index to the DC powerplant rectifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.1 |
||||
|
dm3StatusRectID
mandatory
This OID shows the rectifier ID. This enumerates the number of the rectifier within
a group of rectifiers. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.2 |
||||
|
dm3StatusRectDesc
mandatory
This OID shows the 16-character rectifier description.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.3 |
||||
|
dm3StatusRectCurrent
mandatory
This OID shows the rectifier current in thousandths of Amps (mA).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.4 |
||||
|
dm3StatusRectCurrentLimit
mandatory
Getting this OID will return statusTrue (1) if the rectifier is in the Current Limit state.
statusFalse (2) will be returned if the rectifier is not in the Current Limit state. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.5 |
||||
|
dm3StatusRectStandby
mandatory
Getting this OID will return statusTrue (1) if the rectifier is in the Standby state.
statusFalse (2) will be returned if the rectifier is not in the Standby state. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.6 |
||||
|
dm3StatusRectFanFail
mandatory
Getting this OID will return statusTrue (1) if the rectifier Fan has failed.
statusFalse (2) will be returned if the rectifier Fan has not failed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.7 |
||||
|
dm3StatusRectFail
mandatory
Getting this OID will return statusTrue (1) if the rectifier has failed.
statusFalse (2) will be returned if the rectifier has not failed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.8 |
||||
|
dm3StatusRectDevType
mandatory
This OID shows the rectifier device type.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.9 |
||||
|
dm3StatusRectPhyAddr
mandatory
This OID shows the rectifier physical address (the address on the bus).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.10 |
||||
|
dm3StatusRectCfg
mandatory
Getting this OID will return statusTrue (1) if the rectifier is present after
power-up or set-configuration. statusFalse (2) will be returned if the rectifier is not configured. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.11 |
||||
|
dm3StatusRectPcbRev
mandatory
This OID shows the rectifier device PCB serial number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.12 |
||||
|
dm3StatusRectFwVer
mandatory
This OID shows the rectifier device firmware revision.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.13 |
||||
|
dm3StatusRectPresent
mandatory
Getting this OID will return statusTrue (1) if the rectifier is present.
statusFalse (2) will be returned if the rectifier is not present. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.14 |
||||
|
dm3StatusRectDiagPass
mandatory
Getting this OID will return statusTrue (1) if the rectifier diagnostics have passed.
statusFalse (2) will be returned if the rectifier diagnostics have not passed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.15 |
||||
|
dm3StatusRectState
mandatory
This OID shows the rectifier device state as defined by the device status register.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.1.2.1.16 |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2
·
1 row entry
·
16 columns
Allows for viewing status of the converters. The number of entries is contained in the dm3StatusConvTableSize OID.
The converter to gather status from.
Indexes
dm3StatusConvIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dm3StatusConvIndex
mandatory
The index to the DC powerplant converter.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.1 |
||||
|
dm3StatusConvID
mandatory
This OID shows the converter ID. This enumerates the number of the converter within
a group of converters. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.2 |
||||
|
dm3StatusConvDesc
mandatory
This OID shows the 16 character converter description.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.3 |
||||
|
dm3StatusConvCurrent
mandatory
This OID shows the converter current in thousandths of Amps (mA).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.4 |
||||
|
dm3StatusConvCurrentLimit
mandatory
Getting this OID will return statusTrue (1) if the converter is in the Current Limit state.
statusFalse (2) will be returned if the converter is not in the Current Limit state. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.5 |
||||
|
dm3StatusConvStandby
mandatory
Getting this OID will return statusTrue (1) if the converter is in the Standby state.
statusFalse (2) will be returned if the converter is not in the Standby state. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.6 |
||||
|
dm3StatusConvFanFail
mandatory
Getting this OID will return statusTrue (1) if the converter Fan has failed.
statusFalse (2) will be returned if the converter Fan has not failed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.7 |
||||
|
dm3StatusConvFail
mandatory
Getting this OID will return statusTrue (1) if the converter has failed.
statusFalse (2) will be returned if the converter has not failed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.8 |
||||
|
dm3StatusConvDevType
mandatory
This OID shows the converter device type.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.9 |
||||
|
dm3StatusConvPhyAddr
mandatory
This OID shows the converter physical address (the address on the bus).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.10 |
||||
|
dm3StatusConvCfg
mandatory
Getting this OID will return statusTrue (1) if the converter is present after
power-up or set-configuration. statusFalse (2) will be returned if the converter is not configured. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.11 |
||||
|
dm3StatusConvPcbRev
mandatory
This OID shows the converter device PCB serial number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.12 |
||||
|
dm3StatusConvFwVer
mandatory
This OID shows the converter device firmware version.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.13 |
||||
|
dm3StatusConvPresent
mandatory
Getting this OID will return statusTrue (1) if the converter is present.
statusFalse (2) will be returned if the converter is not present. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.14 |
||||
|
dm3StatusConvDiagPass
mandatory
Getting this OID will return statusTrue (1) if the converter diagnostics have passed.
statusFalse (2) will be returned if the converter diagnostics have not passed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.15 |
||||
|
dm3StatusConvState
mandatory
This OID shows the converter state as defined by the device status register.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.6.2.2.1.16 |
.1.3.6.1.4.1.318.1.1.7.3.7.1.2
·
1 row entry
·
3 columns
Allows for viewing status of the output relays. The number of entries is contained in the dm3StatusOutRlyTableSize OID.
The output relay to gather status from.
Indexes
dm3StatusOutRlyIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dm3StatusOutRlyIndex
mandatory
The index to the DC powerplant output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.7.1.2.1.1 |
||||
|
dm3StatusOutRlyName
mandatory
The name of the output relay. The maximum size is
16 characters. The name is set by using the dm3ConfigOutRlyName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.3.7.1.2.1.2 |
||||
|
dm3StatusOutRlyStatus
mandatory
Getting this OID will return statusOn (1) if the output relay is enabled/on.
statusOff (2) will be returned if the output relay is disabled/off. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.7.1.2.1.3 |
.1.3.6.1.4.1.318.1.1.7.3.7.2.2
·
1 row entry
·
3 columns
Allows for viewing status of the input relays. The number of entries is contained in the dm3StatusInRlyTableSize OID.
The input relays to gather status from.
Indexes
dm3StatusInRlyIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dm3StatusInRlyIndex
mandatory
The index to the DC powerplant input relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.7.2.2.1.1 |
||||
|
dm3StatusInRlyName
mandatory
The name of the input relay. The maximum size is
16 characters. The name is set by using the dm3ConfigInRlyName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.3.7.2.2.1.2 |
||||
|
dm3StatusInRlyStatus
mandatory
Getting this OID will return statusOn (1) if the input relay is enabled/on.
statusOff (2) will be returned if the input relay is disabled/off. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.7.2.2.1.3 |
.1.3.6.1.4.1.318.1.1.7.3.8.1.2
·
1 row entry
·
3 columns
Allows for viewing status of the circuit breakers. The number of entries is contained in the dm3StatusBreakersTableSize OID.
The circuit breaker to gather status from.
Indexes
dm3StatusBreakersIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dm3StatusBreakersIndex
mandatory
The index to the DC powerplant circuit breaker.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.8.1.2.1.1 |
||||
|
dm3StatusBreakersName
mandatory
The name of the circuit breaker. The maximum size is
16 characters. The name is set by using the dm3ConfigBreakersName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.3.8.1.2.1.2 |
||||
|
dm3StatusBreakersStatus
mandatory
Getting this OID will return statusClosed (1) if the circuit breaker is closed.
statusOpen (2) will be returned if the circuit breaker is open. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.8.1.2.1.3 |
.1.3.6.1.4.1.318.1.1.7.3.8.2.2
·
1 row entry
·
3 columns
Allows for viewing status of the fuses. The number of entries is contained in the dm3StatusFusesTableSize OID.
The fuse to gather status from.
Indexes
dm3StatusFusesIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dm3StatusFusesIndex
mandatory
The index to the DC powerplant fuse.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.7.3.8.2.2.1.1 |
||||
|
dm3StatusFusesName
mandatory
The name of the fuse. The maximum size is
16 characters. The name is set by using the dm3ConfigFuseName OID. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.7.3.8.2.2.1.2 |
||||
|
dm3StatusFusesStatus
mandatory
Getting this OID will return statusClosed (1) if the fuse is closed.
statusOpen (2) will be returned if the fuse is open. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.7.3.8.2.2.1.3 |
.1.3.6.1.4.1.318.1.1.8.2.1.3
·
1 row entry
·
3 columns
The number of phases per input line to this device. It is not applicable to AP44xxA units or newer.
An entry containing calibration information applicable to a
particular input phase. It is not applicable to AP44xxA units or newer.
particular input phase. It is not applicable to AP44xxA units or newer.
Indexes
atsCalibrationInputTableIndex atsCalibrationInputPhaseTableIndex
| Column | Syntax | OID |
|---|---|---|
|
atsCalibrationInputTableIndex
mandatory
The input identifier. It is not applicable to AP44xxA units or newer.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.2.1.3.1.1 |
|
atsCalibrationInputPhaseTableIndex
mandatory
The input phase identifier. It is not applicable to AP44xxA units or newer.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.2.1.3.1.2 |
|
atsLineVoltageCalibrationFactor
mandatory
The Line Voltage Calibration factor. This value is set at the factory.
It is not applicable to AP44xxA units or newer. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.2.1.3.1.3 |
.1.3.6.1.4.1.318.1.1.8.2.2.2
·
1 row entry
·
3 columns
A list of Power Supply table entries. It is not applicable to AP44xxA units or newer.
An entry containing information applicable to a particular
Power Supply Voltage. It is not applicable to AP44xxA units or newer.
Power Supply Voltage. It is not applicable to AP44xxA units or newer.
Indexes
atsCalibrationPowerSupplyVoltageTableIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atsCalibrationPowerSupplyVoltageTableIndex
mandatory
The power supply voltage identifier. It is not applicable to AP44xxA units or newer.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.2.2.2.1.1 |
||||||||||
|
atsCalibrationPowerSupplyVoltage
mandatory
This value describes the power supply voltage of
24V Source A, 24V Source B, +12V, -12V and 5V. It is not applicable to AP44xxA units or newer. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.2.2.2.1.2 |
||||||||||
|
atsPowerSupplyVoltageCalibrationFactor
mandatory
The Line Voltage Calibration factor. This value is set at the factory.
It is not applicable to AP44xxA units or newer. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.2.2.2.1.3 |
.1.3.6.1.4.1.318.1.1.8.2.2.3
·
1 row entry
·
3 columns
A list of Power Supply table entries. It is applicable only to AP44xx units.
An entry containing information applicable to a particular
Power Supply Voltage. It is applicable only to AP44xx ATS units.
Power Supply Voltage. It is applicable only to AP44xx ATS units.
Indexes
ats4gCalibrationPowerSupplyVoltageTableIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ats4gCalibrationPowerSupplyVoltageTableIndex
mandatory
The power supply voltage identifier. It is applicable only to AP44xx ATS units.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.2.2.3.1.1 |
||||||||||||
|
ats4gCalibrationPowerSupplyVoltage
mandatory
This value describes the power supply voltage of
24V Source A, 24V Source B, VBoost Source A, VBoost Source B, 3.3V, 1.0V. It is applicable only to AP44xx units. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.2.2.3.1.2 |
||||||||||||
|
ats4gPowerSupplyVoltageCalibrationFactor
mandatory
The Line Voltage Calibration factor. This value is set at the factory.
It is applicable only to AP44xx units. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.2.2.3.1.3 |
.1.3.6.1.4.1.318.1.1.8.2.3.3
·
1 row entry
·
3 columns
A list of output table entries. It is not applicable to AP44xxA units or newer.
An entry containing information applicable to a particular output.
It is not applicable to AP44xxA units or newer.
It is not applicable to AP44xxA units or newer.
Indexes
atsCalibrationOutputTableIndex atsCalibrationOutputPhasesTableIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atsCalibrationOutputTableIndex
mandatory
The output identifier. It is not applicable to AP44xxA units or newer.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.2.3.3.1.1 |
||||||||
|
atsCalibrationOutputPhasesTableIndex
mandatory
Description of each calibration factor for each
output phase utilized in this device and one for neutral. It is not applicable to AP44xxA units or newer. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.2.3.3.1.2 |
||||||||
|
atsOutputCurrentCalibrationFactor
mandatory
The output current calibration factor. It is not applicable to AP44xxA units or newer.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.2.3.3.1.3 |
.1.3.6.1.4.1.318.1.1.8.4.14
·
1 row entry
·
5 columns
Allows for configuration of each ATS bank.
This gives access to bank current threshold
Indexes
atsConfigBankTableIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
atsConfigBankTableIndex
mandatory
An index to the bank table entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.4.14.1.1 |
||||||
|
atsConfigBank
mandatory
The bank number of an ATS
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.4.14.1.2 |
||||||
|
atsConfigBankLowLoadThreshold
mandatory
A threshold that indicates the current drawn is nearing
a low consumption condition. It is represented in Amps. A warning will be issued when the load is less than the threshold value. A threshold value o… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.4.14.1.3 |
||||||
|
atsConfigBankNearOverLoadThreshold
mandatory
A threshold that indicates the current drawn is nearing
an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. Minimum va… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.4.14.1.4 |
||||||
|
atsConfigBankOverLoadThreshold
mandatory
A threshold that indicates the current drawn has entered
an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. Minimum v… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.4.14.1.5 |
.1.3.6.1.4.1.318.1.1.8.4.16
·
1 row entry
·
5 columns
Allows for configuration of each ATS phase.
This gives access to phase threshold
Indexes
atsConfigPhaseTableIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
atsConfigPhaseTableIndex
mandatory
The index to the phase table entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.4.16.1.1 |
||||||
|
atsConfigPhase
mandatory
The phase number of an ATS
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.4.16.1.2 |
||||||
|
atsConfigPhaseLowLoadThreshold
mandatory
A threshold that indicates the current drawn is nearing
a low consumption condition. It is represented in Amps. A warning will be issued when the load is less than the threshold value. A threshold value o… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.4.16.1.3 |
||||||
|
atsConfigPhaseNearOverLoadThreshold
mandatory
A threshold that indicates the current drawn is nearing
an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. Minimum va… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.4.16.1.4 |
||||||
|
atsConfigPhaseOverLoadThreshold
mandatory
A threshold that indicates the current drawn has entered
an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. Minimum v… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.4.16.1.5 |
.1.3.6.1.4.1.318.1.1.8.5.3.2
·
1 row entry
·
6 columns
A list of input table entries. The number of entries is given by the value of atsNumInputs.
An entry containing information applicable to a
particular input.
particular input.
Indexes
atsInputTableIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atsInputTableIndex
mandatory
The input identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.2.1.1 |
||||||||||
|
atsNumInputPhases
mandatory
The number of input phases utilized in this
device. The sum of all the atsNumInputPhases variable indicates the number of rows in the input phase table. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.2.1.2 |
||||||||||
|
atsInputVoltageOrientation
mandatory
The input voltage orientation:
1: unknown for this Source 2: singlePhase - phase 1 voltage is between Phase 1 and Neutral. 3: splitPhase - phase 1 voltage is between Phase 1 and Neutral; phase 2 voltage is between Phase… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.5.3.2.1.3 |
||||||||||
|
atsInputFrequency
mandatory
The input frequency in Hertz, or -1 if it's unsupported
by this Source. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.2.1.4 |
||||||||||
|
atsInputType
mandatory
The input type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.5.3.2.1.5 |
||||||||||
|
atsInputName
mandatory
A name given to a particular input.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.8.5.3.2.1.6 |
.1.3.6.1.4.1.318.1.1.8.5.3.3
·
1 row entry
·
11 columns
A list of input table entries. The number of entries is given by the sum of the atsNumInputPhases.
An entry containing information applicable to a
particular input phase.
particular input phase.
Indexes
atsInputPhaseTableIndex atsInputPhaseIndex
| Column | Syntax | OID |
|---|---|---|
|
atsInputPhaseTableIndex
mandatory
The input identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.1 |
|
atsInputPhaseIndex
mandatory
The input phase identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.2 |
|
atsInputVoltage
mandatory
The input voltage in VAC, or -1 if it's unsupported
by this Source. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.3 |
|
atsInputMaxVoltage
mandatory
The maximum input voltage in VAC measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.4 |
|
atsInputMinVoltage
mandatory
The minimum input voltage in VAC measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.5 |
|
atsInputCurrent
mandatory
The input current in amperes, or -1 if it's
unsupported by this Source. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.6 |
|
atsInputMaxCurrent
mandatory
The maximum input current in amperes measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.7 |
|
atsInputMinCurrent
mandatory
The minimum input current in amperes measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.8 |
|
atsInputPower
mandatory
The input power in Watts, or -1 if it's unsupported
by this Source. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.9 |
|
atsInputMaxPower
mandatory
The maximum input power in Watts measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.10 |
|
atsInputMinPower
mandatory
The minimum input power in Watts measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.3.3.1.11 |
.1.3.6.1.4.1.318.1.1.8.5.4.2
·
1 row entry
·
4 columns
A list of output table entries. The number of entries is given by the value of atsOutputNumPhases.
An entry containing information applicable to a
particular output.
particular output.
Indexes
atsOutputTableIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
atsOutputTableIndex
mandatory
The output identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.2.1.1 |
||||||||||
|
atsNumOutputPhases
mandatory
The number of output phases utilized in this
device. The sum of all the atsNumOutputPhases variable indicates the number of rows in the output phase table. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.2.1.2 |
||||||||||
|
atsOutputVoltageOrientation
mandatory
The output voltage orientation:
1: unknown for this ATS 2: singlePhase - phase 1 voltage is between Phase 1 and Neutral. 3: splitPhase - phase 1 voltage is between Phase 1 and Neutral; phase 2 voltage is between Phase 2… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.5.4.2.1.3 |
||||||||||
|
atsOutputFrequency
mandatory
The output frequency in Hertz, or -1 if it's
unsupported by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.2.1.4 |
.1.3.6.1.4.1.318.1.1.8.5.4.3
·
1 row entry
·
19 columns
A list of output table entries. The number of entries is given by the sum of the atsNumOutputPhases.
An entry containing information applicable to a
particular output phase.
particular output phase.
Indexes
atsOutputPhaseTableIndex atsOutputPhaseIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atsOutputPhaseTableIndex
mandatory
The output identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.1 |
||||||||
|
atsOutputPhaseIndex
mandatory
Description of each output phase utilized in
this device and one for neutral. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.2 |
||||||||
|
atsOutputVoltage
mandatory
The output voltage in VAC, or -1 if it's unsupported
by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.3 |
||||||||
|
atsOutputCurrent
mandatory
The output current in 0.1 amperes drawn
by the load on the ATS, or -1 if it's unsupported by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.4 |
||||||||
|
atsOutputMaxCurrent
mandatory
The maximum output current in 0.1 amperes measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.5 |
||||||||
|
atsOutputMinCurrent
mandatory
The minimum output current in 0.1 amperes measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.6 |
||||||||
|
atsOutputLoad
mandatory
The output load in VA, or -1 if it's unsupported
by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.7 |
||||||||
|
atsOutputMaxLoad
mandatory
The maximum output load in VA measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.8 |
||||||||
|
atsOutputMinLoad
mandatory
The minimum output load in VA measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.9 |
||||||||
|
atsOutputPercentLoad
mandatory
The percentage of the ATS load capacity in VA at
redundancy @ (n + x) presently being used on this output phase, or -1 if it's unsupported by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.10 |
||||||||
|
atsOutputMaxPercentLoad
mandatory
The maximum percentage of the ATS load capacity in
VA measured at redundancy @ (n + x) presently being used on this output phase since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.11 |
||||||||
|
atsOutputMinPercentLoad
mandatory
The minimum percentage of the ATS load capacity in
VA measured at redundancy @ (n + x) presently being used on this output phase since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.12 |
||||||||
|
atsOutputPower
mandatory
The output apparent power in VA, or
-1 if it's unsupported by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.13 |
||||||||
|
atsOutputMaxPower
mandatory
The maximum output power in VAs measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.14 |
||||||||
|
atsOutputMinPower
mandatory
The minimum output power in VA measured
since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.15 |
||||||||
|
atsOutputPercentPower
mandatory
The percentage of the ATSpower capacity in VA at
redundancy @ (n + x) presently being used on this output phase, or -1 if it's unsupported by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.16 |
||||||||
|
atsOutputMaxPercentPower
mandatory
The maximum percentage of the ATSpower capacity
in VA measured at redundancy @ (n + x) presently being used on this output phase since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.17 |
||||||||
|
atsOutputMinPercentPower
mandatory
The minimum percentage of the ATSpower capacity
in VA measured at redundancy @ (n + x) presently being used on this output phase since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.18 |
||||||||
|
atsOutputPhaseState
mandatory
Getting this OID will return the phase load state.
normal(1) indicates that the bank is operating properly within the atsConfigPhaseLowLoadThreshold and atsConfigPhaseNearOverLoadThreshold OID values. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.5.4.3.1.19 |
.1.3.6.1.4.1.318.1.1.8.5.4.5
·
1 row entry
·
20 columns
Allows for getting table entries.
This gives access to bank table entries
Indexes
atsOutputBankTableIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atsOutputBankTableIndex
mandatory
The index to the bank table entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.1 |
||||||||
|
atsOutputPhase
mandatory
The phase number of an ATS
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.2 |
||||||||
|
atsOutputBank
mandatory
The bank number of an ATS
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.3 |
||||||||
|
atsOutputBankCurrent
mandatory
Getting this OID will return the bank current measured
in tenths of Amps. |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.4 |
||||||||
|
atsOutputBankState
mandatory
Getting this OID will return the bank load state.
normal(1) indicates that the bank is operating properly within the atsConfigBankLowLoadThreshold and atsConfigBankNearOverLoadThreshold OID values. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.5 |
||||||||
|
atsOutputBankOutputVoltage
mandatory
The output voltage in VAC, or -1 if it's unsupported
by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.6 |
||||||||
|
atsOutputBankMaxCurrent
mandatory
The maximum output current, on the bank represented by
OID atsOutputBank, in 0.1 amperes measured since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.7 |
||||||||
|
atsOutputBankMinCurrent
mandatory
The minimum output current, on the bank represented by
OID atsOutputBank, in 0.1 amperes measured since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.8 |
||||||||
|
atsOutputBankLoad
mandatory
The output load, on the bank represented by
OID atsOutputBank, in VA, or -1 if it's unsupported by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.9 |
||||||||
|
atsOutputBankMaxLoad
mandatory
The maximum output load, on the bank represented by
OID atsOutputBank, in VA measured since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.10 |
||||||||
|
atsOutputBankMinLoad
mandatory
The minimum output load, on the bank represented by
OID atsOutputBank, in VA measured since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.11 |
||||||||
|
atsOutputBankPercentLoad
mandatory
The percentage of the ATS load capacity in VA at
redundancy @ (n + x) presently being used on this bank, represented by OID atsOutputBank. Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.12 |
||||||||
|
atsOutputBankMaxPercentLoad
mandatory
The maximum percentage of the ATS load capacity in
VA measured at redundancy @ (n + x) presently being used on this bank, represented by OID atsOutputBank, since the last time this variable was read or reset (atsStatusR… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.13 |
||||||||
|
atsOutputBankMinPercentLoad
mandatory
The minimum percentage of the ATS load capacity in
VA measured at redundancy @ (n + x) presently being used on this bank, represented by OID atsOutputBank, since the last time this variable was read or reset (atsStatusR… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.14 |
||||||||
|
atsOutputBankPower
mandatory
The output apparent power in VA on the bank represented by
OID atsOutputBank or -1 if it's unsupported by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.15 |
||||||||
|
atsOutputBankMaxPower
mandatory
The maximum output power in VA measured on the bank
represented by OID atsOutputBank since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.16 |
||||||||
|
atsOutputBankMinPower
mandatory
The minimum output power in VA measured on the bank
represented by OID atsOutputBank since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (-1) if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.17 |
||||||||
|
atsOutputBankPercentPower
mandatory
The percentage of the ATSpower capacity in Watts at
redundancy @ (n + x) presently being used on this bank, represented by OID atsOutputBank, or -1 if it's unsupported by this ATS. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.18 |
||||||||
|
atsOutputBankMaxPercentPower
mandatory
The maximum percentage of the ATSpower capacity
in VA measured at redundancy @ (n + x) presently being used on this bank, represented by OID atsOutputBank, since the last time this variable was read or reset (atsStatusR… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.19 |
||||||||
|
atsOutputBankMinPercentPower
mandatory
The minimum percentage of the ATSpower capacity
in VA measured at redundancy @ (n + x) presently being used on this bank, represented by OID atsOutputBank since the last time this variable was read or reset (atsStatusRe… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.8.5.4.5.1.20 |
.1.3.6.1.4.1.318.1.1.9.3.3.2
·
1 row entry
·
4 columns
Allows for accessing settings of the LVDs. The number of entries is contained in the dcmim2ConfigLVDTableSize OID.
The LVD to configure.
Indexes
dcmim2ConfigLVDIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dcmim2ConfigLVDIndex
mandatory
The index to the DC powerplant LVD.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.3.3.2.1.1 |
||||
|
dcmim2ConfigLVDTrip
mandatory
LVD Trip threshold. System bus voltage at which LVD will trip (open)
during a battery backup operation. Values are represented in thousandths of Volts (mV). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.3.3.2.1.2 |
||||
|
dcmim2ConfigLVDReset
mandatory
LVD Reset threshold. System bus voltage at which LVD will reset (close)
after AC power has been restored. Values are represented in thousandths of Volts (mV). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.3.3.2.1.3 |
||||
|
dcmim2ConfigLVDState
mandatory
Getting this OID will return statusClosed (1) if the LVD is closed.
statusOpened (2) will be returned if the LVD is opened. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.9.3.3.2.1.4 |
.1.3.6.1.4.1.318.1.1.9.4.2.2
·
1 row entry
·
6 columns
Allows for accessing settings of the rectifiers. The number of entries is contained in the dcmim2StatusRectTableSize OID.
The rectifier to gather status from.
Indexes
dcmim2StatusRectIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dcmim2StatusRectIndex
mandatory
The index to the DC powerplant rectifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.4.2.2.1.1 |
||||
|
dcmim2StatusRectDevType
mandatory
This OID shows the rectifier device type.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.4.2.2.1.2 |
||||
|
dcmim2StatusRectID
mandatory
This OID shows the rectifier ID. This enumerates the number of the rectifier within
a group of rectifiers. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.4.2.2.1.3 |
||||
|
dcmim2StatusRectPhyAddr
mandatory
This OID shows the rectifier physical address (the address on the bus).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.4.2.2.1.4 |
||||
|
dcmim2StatusRectFail
mandatory
Getting this OID will return statusTrue (1) if the rectifier has failed.
statusFalse (2) will be returned if the rectifier has not failed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.9.4.2.2.1.5 |
||||
|
dcmim2StatusRectCurrent
mandatory
This OID shows the individual rectifier current in thousandths of Amps (mA).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.4.2.2.1.6 |
.1.3.6.1.4.1.318.1.1.9.4.4.2
·
1 row entry
·
2 columns
Allows for accessing the LVDs. The number of entries is contained in the dcmim2StatusLVDTableSize OID.
The LVD to access.
Indexes
dcmim2StatusLVDIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dcmim2StatusLVDIndex
mandatory
The index to the DC powerplant LVD.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.4.4.2.1.1 |
||||
|
dcmim2StatusLVDState
mandatory
Getting this OID will return statusClosed (1) if the LVD is closed.
statusOpened (2) will be returned if the LVD is opened. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.9.4.4.2.1.2 |
.1.3.6.1.4.1.318.1.1.9.4.5.2
·
1 row entry
·
2 columns
Allows for accessing system alarms. The number of entries is contained in the dcmim2StatusAlarmsTableSize OID.
The alarm to display.
Indexes
dcmim2StatusAlarmsIndex
| Column | Syntax | OID |
|---|---|---|
|
dcmim2StatusAlarmsIndex
mandatory
The index of the system alarm.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.9.4.5.2.1.1 |
|
dcmim2StatusAlarmsText
mandatory
The 16 character text describing the active alarm condition.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.9.4.5.2.1.2 |
.1.3.6.1.4.1.318.1.1.10.1.2.2
·
1 row entry
·
22 columns
A list of probes supported by the Environmental Monitor and their configurations.
The Environmental Monitor probe configurations.
Indexes
emConfigProbeNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emConfigProbeNumber
mandatory
The index into an Environmental Monitor probe entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.1 |
||||
|
emConfigProbeName
mandatory
A descriptive name of the probe set by the user,
possibly denoting its location or purpose. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.2 |
||||
|
emConfigProbeHighTempThreshold
mandatory
The high temperature alarm threshold for the probe.
Units are displayed in the scale selected in the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.3 |
||||
|
emConfigProbeLowTempThreshold
mandatory
The low temperature alarm threshold for the probe.
Units are displayed in the scale selected in the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.4 |
||||
|
emConfigProbeTempUnits
mandatory
The temperature scale used to display the temperature
thresholds of the probe, Celsius(1) or Fahrenheit(2). This setting is based on the system preferences configuration in the agent. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.5 |
||||
|
emConfigProbeHighHumidThreshold
mandatory
The high humidity alarm threshold for the probe in
percent relative humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.6 |
||||
|
emConfigProbeLowHumidThreshold
mandatory
The low humidity alarm threshold for the probe in
percent relative humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.7 |
||||
|
emConfigProbeHighTempEnable
mandatory
The high temperature alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.8 |
||||
|
emConfigProbeLowTempEnable
mandatory
The low temperature alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.9 |
||||
|
emConfigProbeHighHumidEnable
mandatory
The high humidity alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.10 |
||||
|
emConfigProbeLowHumidEnable
mandatory
The low humidity alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.11 |
||||
|
emConfigProbeMaxTempThreshold
mandatory
The maximum temperature alarm threshold for the probe.
Units are displayed in the scale selected in the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.12 |
||||
|
emConfigProbeMinTempThreshold
mandatory
The minimum temperature alarm threshold for the probe.
Units are displayed in the scale selected in the 'emConfigProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.13 |
||||
|
emConfigProbeMaxHumidThreshold
mandatory
The maximun humidity alarm threshold for the probe in
percent relative humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.14 |
||||
|
emConfigProbeMinHumidThreshold
mandatory
The minimum humidity alarm threshold for the probe in
percent relative humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.15 |
||||
|
emConfigProbeMaxTempEnable
mandatory
The maximum temperature alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been viola… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.16 |
||||
|
emConfigProbeMinTempEnable
mandatory
The minimum temperature alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been viola… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.17 |
||||
|
emConfigProbeMaxHumidEnable
mandatory
The maximum humidity alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.18 |
||||
|
emConfigProbeMinHumidEnable
mandatory
The minimum humidity alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.19 |
||||
|
emConfigProbeTempHysteresis
mandatory
The number of degrees beyond the temperature thresholds
at which an active temperature alarm will be cleared. This configuration setting applies to all temperature thresholds. Units are displayed in the scale selected i… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.20 |
||||
|
emConfigProbeHumidHysteresis
mandatory
The number of percent RH points beyond the humidity
thresholds at which an active humidity alarm will be cleared. This configuration setting applies to all humidity thresholds. Units are displayed in the scale selected … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.21 |
||||
|
emConfigProbeLocation
mandatory
A string describing the location of the probe.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.1.2.2.1.22 |
.1.3.6.1.4.1.318.1.1.10.1.2.4
·
1 row entry
·
6 columns
A list of contacts supported by the Environmental Monitor and their configurations.
The Environmental Monitor contact configurations.
Indexes
emConfigContactNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emConfigContactNumber
mandatory
The index of an Environmental Monitor contact.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.2.4.1.1 |
||||||
|
emConfigContactName
mandatory
A descriptive name for an Environmental Monitor
contact set by the user, possibly denoting its location or purpose. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.1.2.4.1.2 |
||||||
|
emConfigContactEnable
mandatory
An Environmental Monitor contact alarm enable/disable.
No alarm will be generated if the contact is disabled(1). An alarm will be generated if the contact is enabled(2) and the contact has been faulted. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.4.1.3 |
||||||
|
emConfigContactSeverity
mandatory
The severity of the alarm that will be triggered when
the input contact is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.4.1.4 |
||||||
|
emConfigContactNormalState
mandatory
The contact state that will be considered normal, i.e.
will not trigger an alarm. The states are open(1) or closed(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.2.4.1.5 |
||||||
|
emConfigContactLocation
mandatory
A descriptive label for the contact denoting its
location or purpose. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.1.2.4.1.6 |
.1.3.6.1.4.1.318.1.1.10.1.3.3
·
1 row entry
·
14 columns
A list of probes supported by the Environmental Monitor and their status.
The status of the probe.
Indexes
emStatusProbeNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emStatusProbeNumber
mandatory
The index of the probe.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.1 |
||||||
|
emStatusProbeName
mandatory
A descriptive name for the probe set by the user,
possibly denoting its location or purpose. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.2 |
||||||
|
emStatusProbeStatus
mandatory
The connected status of the probe, either
disconnected(1) or connected(2). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.3 |
||||||
|
emStatusProbeCurrentTemp
mandatory
The current temperature reading from the probe displayed
in the units shown in the 'emStatusProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.4 |
||||||
|
emStatusProbeTempUnits
mandatory
The temperature scale used to display the temperature
thresholds of the probe, Celsius(1) or Fahrenheit(2). This setting is based on the system preferences configuration in the agent. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.5 |
||||||
|
emStatusProbeCurrentHumid
mandatory
The current humidity reading from the probe in
percent relative humidity. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.6 |
||||||
|
emStatusProbeHighTempViolation
mandatory
The high temperature violation status of the probe
temperature reading. This OID will show a highTempViolation(2) if the current temperature reading shown in the 'emStatusProbeCurrentTemp' OID is greater than or equal t… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.7 |
||||||
|
emStatusProbeLowTempViolation
mandatory
The high temperature violation status of the probe
temperature reading. This OID will show a lowTempViolation(2) if the current temperature reading shown in the 'emStatusProbeCurrentTemp' OID is less than or equal to th… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.8 |
||||||
|
emStatusProbeHighHumidViolation
mandatory
The high humidity violation status of the probe humidity
reading. This OID will show a highTempViolation(2) if the current humidity reading shown in the 'emStatusProbeCurrentHumid' OID is greater than or equal to the hi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.9 |
||||||
|
emStatusProbeLowHumidViolation
mandatory
The low humidity violation status of the probe humidity
reading. This OID will show a lowTempViolation(2) if the current humidity reading shown in the 'emStatusProbeCurrentHumid' OID is less than or equal to the low hum… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.10 |
||||||
|
emStatusProbeMaxTempViolation
mandatory
The max temperature violation status of the probe
temperature reading. This OID will show a maxTempViolation(2) if the current temperature reading shown in the 'emStatusProbeCurrentTemp' OID is greater than or equal to … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.11 |
||||||
|
emStatusProbeMinTempViolation
mandatory
The minimum temperature violation status of the probe
temperature reading. This OID will show a minTempViolation(2) if the current temperature reading shown in the 'emStatusProbeCurrentTemp' OID is less than or equal to… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.12 |
||||||
|
emStatusProbeMaxHumidViolation
mandatory
The maximum humidity violation status of the probe humidity
reading. This OID will show a maxTempViolation(2) if the current humidity reading shown in the 'emStatusProbeCurrentHumid' OID is greater than or equal to the … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.13 |
||||||
|
emStatusProbeMinHumidViolation
mandatory
The minimum humidity violation status of the probe humidity
reading. This OID will show a minTempViolation(2) if the current humidity reading shown in the 'emStatusProbeCurrentHumid' OID is less than or equal to the min… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.3.1.14 |
.1.3.6.1.4.1.318.1.1.10.1.3.5
·
1 row entry
·
3 columns
A list of contacts supported by the Environmental Monitor and their status.
The status of the contact.
Indexes
emStatusContactNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emStatusContactNumber
mandatory
The index of the Environmental Monitor contact.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.1.3.5.1.1 |
||||||
|
emStatusContactName
mandatory
A descriptive name for the Environmental Monitor contact
set by the user, possibly denoting its location or purpose. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.1.3.5.1.2 |
||||||
|
emStatusContactStatus
mandatory
The status of the Environmental Monitor contact. The status
will show noFault(1) if the contact is in the normal state and the 'emConfigContactEnable' OID is enabled. The status will show a fault(2) if the contact is fa… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.1.3.5.1.3 |
.1.3.6.1.4.1.318.1.1.10.2.2.2
·
1 row entry
·
22 columns
A list of probes supported by the Environmental Monitor and their configurations.
The Environmental Monitor probe configurations.
Indexes
iemConfigProbeNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
iemConfigProbeNumber
mandatory
The index to a Environmental Monitor probe entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.1 |
||||
|
iemConfigProbeName
mandatory
A descriptive name for the probe set by the user,
possibly denoting its location or purpose. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.2 |
||||
|
iemConfigProbeHighTempThreshold
mandatory
The high temperature alarm threshold for the probe.
Units are displayed in the scale selected in the 'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.3 |
||||
|
iemConfigProbeLowTempThreshold
mandatory
The low temperature alarm threshold for the probe.
Units are displayed in the scale selected in the 'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.4 |
||||
|
iemConfigProbeTempUnits
mandatory
The temperature scale used to display the temperature
thresholds of the probe, Celsius(1) or Fahrenheit(2). This setting is based on the system preferences configuration in the agent. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.5 |
||||
|
iemConfigProbeHighHumidThreshold
mandatory
The high humidity alarm threshold for the probe in
percent relative humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.6 |
||||
|
iemConfigProbeLowHumidThreshold
mandatory
The low humidity alarm threshold for the probe in
percent relative humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.7 |
||||
|
iemConfigProbeHighTempEnable
mandatory
The high temperature alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.8 |
||||
|
iemConfigProbeLowTempEnable
mandatory
The low temperature alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.9 |
||||
|
iemConfigProbeHighHumidEnable
mandatory
The high humidity alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.10 |
||||
|
iemConfigProbeLowHumidEnable
mandatory
The low humidity alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.11 |
||||
|
iemConfigProbeMaxTempThreshold
mandatory
The maximun temperature alarm threshold for the probe.
Units are displayed in the scale selected in the 'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.12 |
||||
|
iemConfigProbeMinTempThreshold
mandatory
The minimun temperature alarm threshold for the probe.
Units are displayed in the scale selected in the 'iemConfigProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.13 |
||||
|
iemConfigProbeMaxHumidThreshold
mandatory
The maximum humidity alarm threshold for the probe in
percent relative humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.14 |
||||
|
iemConfigProbeMinHumidThreshold
mandatory
The minimum humidity alarm threshold for the probe in
percent relative humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.15 |
||||
|
iemConfigProbeMaxTempEnable
mandatory
The maximum temperature alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been viola… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.16 |
||||
|
iemConfigProbeMinTempEnable
mandatory
The low temperature alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.17 |
||||
|
iemConfigProbeMaxHumidEnable
mandatory
The maximum humidity alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.18 |
||||
|
iemConfigProbeMinHumidEnable
mandatory
The minimum humidity alarm enable/disable for the
probe. No alarm will be generated if this value is set to disabled(1). The alarm will be generated if this value is set to enabled(2) and the threshold has been violated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.19 |
||||
|
iemConfigProbeTempHysteresis
mandatory
The number of degrees beyond the temperature thresholds
at which an active temperature alarm will be cleared. This configuration setting applies to all temperature thresholds. Units are displayed in the scale selected i… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.20 |
||||
|
iemConfigProbeHumidHysteresis
mandatory
The number of percent RH points beyond the humidity
thresholds at which an active humidity alarm will be cleared. This configuration setting applies to all humidity thresholds. Units are displayed in the scale selected … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.21 |
||||
|
iemConfigProbeLocation
mandatory
A string describing the location of the probe.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.2.2.2.1.22 |
.1.3.6.1.4.1.318.1.1.10.2.2.4
·
1 row entry
·
6 columns
A list of contacts supported by the Environmental Monitor and their configurations.
The Environmental Monitor contact configurations.
Indexes
iemConfigContactNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
iemConfigContactNumber
mandatory
The index of an Environmental Monitor contact.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.4.1.1 |
||||||
|
iemConfigContactName
mandatory
A descriptive name for the Environmental Monitor contact
set by the user, possibly denoting its location or purpose. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.2.2.4.1.2 |
||||||
|
iemConfigContactEnable
mandatory
An Environmental Monitor contact alarm enable/disable.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.4.1.3 |
||||||
|
iemConfigContactSeverity
mandatory
The severtity of the alarm that will be triggered when
the input contact is activated. The alarms can be critical(1), warning(2) or informational(3). NOTE: informational(3) is deprecated (and no longer valid) for this O… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.4.1.4 |
||||||
|
iemConfigContactNormalState
mandatory
The contact state that will be considered normal, i.e.
will not trigger an alarm. The states are open(1) or closed(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.4.1.5 |
||||||
|
iemConfigContactLocation
mandatory
A descriptive label for the contact denoting its
location or purpose. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.2.2.4.1.6 |
.1.3.6.1.4.1.318.1.1.10.2.2.6
·
1 row entry
·
4 columns
A list of output relays supported by the Environmental Monitor and their configurations.
The Environmental Monitor output relay configurations.
Indexes
iemConfigRelayNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
iemConfigRelayNumber
mandatory
The index of an Environmental Monitor output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.6.1.1 |
||||
|
iemConfigRelayName
mandatory
A descriptive name of an Environmental Monitor output relay,
set by the user, describing its location or purpose. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.2.2.6.1.2 |
||||
|
iemConfigRelayNormalState
mandatory
The normal state (non-fault state) of an Environmental
Monitor output relay, either open(1) or closed(2). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.2.6.1.3 |
||||
|
iemConfigRelayFaultCondition
mandatory
The fault condition used to activate the output relay.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.2.6.1.4 |
.1.3.6.1.4.1.318.1.1.10.2.3.2
·
1 row entry
·
15 columns
A list of probes supported by the Environmental Monitor and their status.
The status of the probe.
Indexes
iemStatusProbeNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
iemStatusProbeNumber
mandatory
The index of the probe.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.1 |
||||||
|
iemStatusProbeName
mandatory
A descriptive name for the probe set by the user.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.2 |
||||||
|
iemStatusProbeStatus
mandatory
The connected status of the probe, either
disconnected(1) or connected(2). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.3 |
||||||
|
iemStatusProbeCurrentTemp
mandatory
The current temperature reading from the probe displayed
in the units shown in the 'iemStatusProbeTempUnits' OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.4 |
||||||
|
iemStatusProbeTempUnits
mandatory
The temperature scale used to display the temperature
thresholds of the probe, Celsius(1) or Fahrenheit(2). This setting is based on the system preferences configuration in the agent. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.5 |
||||||
|
iemStatusProbeCurrentHumid
mandatory
The current humidity reading from the probe in percent
relative humidity. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.6 |
||||||
|
iemStatusProbeHighTempViolation
mandatory
The high temperature violation status of the probe
temperature reading. This OID will show a highTempViolation(2) if the current temperature reading shown in the 'iemStatusProbeCurrentTemp' OID is greater than or equal … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.7 |
||||||
|
iemStatusProbeLowTempViolation
mandatory
The high temperature violation status of the probe
temperature reading. This OID will show a lowTempViolation(2) if the current temperature reading shown in the 'iemStatusProbeCurrentTemp' OID is less than or equal to t… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.8 |
||||||
|
iemStatusProbeHighHumidViolation
mandatory
The high humidity violation status of the probe humidity
reading. This OID will show a highTempViolation(2) if the current humidity reading shown in the 'iemStatusProbeCurrentHumid' OID is greater than or equal to the h… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.9 |
||||||
|
iemStatusProbeLowHumidViolation
mandatory
The low humidity violation status of the probe humidity
reading. This OID will show a lowTempViolation(2) if the current humidity reading shown in the 'iemStatusProbeCurrentHumid' OID is less than or equal to the low hu… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.10 |
||||||
|
iemStatusProbeMaxTempViolation
mandatory
The max temperature violation status of the probe
temperature reading. This OID will show a maxTempViolation(2) if the current temperature reading shown in the 'iemStatusProbeCurrentTemp' OID is greater than or equal to… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.11 |
||||||
|
iemStatusProbeMinTempViolation
mandatory
The minimum temperature violation status of the probe
temperature reading. This OID will show a minTempViolation(2) if the current temperature reading shown in the 'iemStatusProbeCurrentTemp' OID is less than or equal t… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.12 |
||||||
|
iemStatusProbeMaxHumidViolation
mandatory
The maximum humidity violation status of the probe humidity
reading. This OID will show a maxTempViolation(2) if the current humidity reading shown in the 'iemStatusProbeCurrentHumid' OID is greater than or equal to the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.13 |
||||||
|
iemStatusProbeMinHumidViolation
mandatory
The minimum humidity violation status of the probe humidity
reading. This OID will show a minTempViolation(2) if the current humidity reading shown in the 'iemStatusProbeCurrentHumid' OID is less than or equal to the mi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.14 |
||||||
|
iemStatusProbeLocation
mandatory
A descriptive location for the probe set by the user.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.2.3.2.1.15 |
.1.3.6.1.4.1.318.1.1.10.2.3.4
·
1 row entry
·
3 columns
A list of contacts supported by the Environmental Monitor and their status.
The status of the contact.
Indexes
iemStatusContactNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
iemStatusContactNumber
mandatory
The index of the Environmental Monitor contact.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.3.4.1.1 |
||||||
|
iemStatusContactName
mandatory
A descriptive name for the Environmental Monitor contact
set by the user, denoting its location or purpose. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.2.3.4.1.2 |
||||||
|
iemStatusContactStatus
mandatory
The status of the Environmental Monitor contact. The status
will show noFault(1) if the contact is in the normal state and the 'iemConfigContactEnable' OID is enabled. The status will show a fault(2) if the contact is f… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.4.1.3 |
.1.3.6.1.4.1.318.1.1.10.2.3.7
·
1 row entry
·
3 columns
A list of output relays supported by the Environmental Monitor and their status.
The status of the relay.
Indexes
iemStatusRelayNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
iemStatusRelayNumber
mandatory
The index of the output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.2.3.7.1.1 |
||||
|
iemStatusRelayName
mandatory
A descriptive name for the output relay set by the
user, denoting its location or purpose. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.2.3.7.1.2 |
||||
|
iemStatusRelayStatus
mandatory
The status of the output relay, either faultState(1) or
normalState(2). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.2.3.7.1.3 |
.1.3.6.1.4.1.318.1.1.10.3.2.1
·
1 row entry
·
3 columns
Allows for control of individual output relays. The number of entries is contained in the emsStatusOutputRelayCount OID.
The output relays to control.
Indexes
emsOutputRelayControlOutputRelayIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsOutputRelayControlOutputRelayIndex
mandatory
The index to the output relay entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.2.1.1.1 |
||||
|
emsOutputRelayControlOutputRelayName
mandatory
The name of the output relay.
This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.2.1.1.2 |
||||
|
emsOutputRelayControlOutputRelayCommand
mandatory
Getting this variable will return the output relay state. If
the output relay is closed, the immediateCloseEMS (1) value will be returned. If the output relay is open, the immediateOpenEMS (2) value will be returned. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.2.1.1.3 |
.1.3.6.1.4.1.318.1.1.10.3.3.1
·
1 row entry
·
3 columns
Allows for control of individual outlet switches. The number of entries is contained in the emsStatusOutletCount OID.
The outlets to control.
Indexes
emsOutletControlOutletIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsOutletControlOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.3.1.1.1 |
||||
|
emsOutletControlOutletName
mandatory
The name of the outlet.
This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.3.1.1.2 |
||||
|
emsOutletControlOutletCommand
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the immediateOnEMS (1) value will be returned. If the outlet is off, the immediateOffEMS (2) value will be returned. Setting this v… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.3.1.1.3 |
.1.3.6.1.4.1.318.1.1.10.3.4.1
·
1 row entry
·
4 columns
Allows for control/reset of individual sensors. The number of entries is contained in the emsStatusSensorCount OID.
The sensors to control/reset.
Indexes
emsSensorControlSensorIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsSensorControlSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.4.1.1.1 |
||||
|
emsSensorControlSensorSystemName
mandatory
The system name of the sensor. This describes the hardware system
intent of this sensor. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.4.1.1.2 |
||||
|
emsSensorControlSensorUserName
mandatory
The name of the sensor as given by the system user.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.4.1.1.3 |
||||
|
emsSensorControlSensorCommand
mandatory
Getting this variable will return noCommandEMS(1).
Setting this variable to resetCommandEMS(2) will issue a reset command to the sensor. Some sensors cannot be manually reset and will not be affected by … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.4.1.1.4 |
.1.3.6.1.4.1.318.1.1.10.3.5.1
·
1 row entry
·
3 columns
Allows for control of individual alarm devices. Note: Some alarm devices are not controllable. The number of entries is contained in the emsStatusAlarmDeviceCount OID.
The alarm devices to control.
Indexes
emsAlarmDeviceControlDeviceIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsAlarmDeviceControlDeviceIndex
mandatory
The index to the alarm device entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.5.1.1.1 |
||||||
|
emsAlarmDeviceControlDeviceName
mandatory
The name of the alarm device.
This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.5.1.1.2 |
||||||
|
emsAlarmDeviceControlDeviceCommand
mandatory
Getting this variable will return the device state. If
the device is active, the alarmDeviceOnEMS (1) value will be returned. If the device is inactive, the alarmDeviceOffEMS (2) value will be returned. If the device is… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.5.1.1.3 |
.1.3.6.1.4.1.318.1.1.10.3.7.1
·
1 row entry
·
22 columns
Allows for configuration of individual probes. The number of entries is contained in the emsStatusProbeCount OID.
The probes to configure.
Indexes
emsProbeConfigProbeIndex
| Column | Syntax | OID |
|---|---|---|
|
emsProbeConfigProbeIndex
mandatory
The index to the probe entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.1 |
|
emsProbeConfigProbeName
mandatory
The name of the probe.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.2 |
|
emsProbeConfigProbeHighTempThresh
mandatory
Probe high temperature threshold.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.3 |
|
emsProbeConfigProbeLowTempThresh
mandatory
Probe low temperature threshold.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.4 |
|
emsProbeConfigProbeHighHumidityThresh
mandatory
Probe high humidity threshold.
Values are represented in whole number percentage. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.5 |
|
emsProbeConfigProbeLowHumidityThresh
mandatory
Probe low humidity threshold.
Values are represented in whole number percentage. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.6 |
|
emsProbeConfigProbeMaxTempThresh
mandatory
Probe maximum temperature threshold.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.7 |
|
emsProbeConfigProbeMinTempThresh
mandatory
Probe minimum temperature threshold.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.8 |
|
emsProbeConfigProbeDeltaTemp
mandatory
Probe delta temperature.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.9 |
|
emsProbeConfigProbeMaxHumidityThresh
mandatory
Probe maximum humidity threshold.
Values are represented in whole number percentage. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.10 |
|
emsProbeConfigProbeMinHumidityThresh
mandatory
Probe minimum humidity threshold.
Values are represented in whole number percentage. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.11 |
|
emsProbeConfigProbeDeltaHumidity
mandatory
Probe delta humidity.
Values are represented in whole number percentage. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.12 |
|
emsProbeConfigProbeSTIncTempVariance
mandatory
Probe short-term increasing temperature variance used for rate of change alarms.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Ce… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.13 |
|
emsProbeConfigProbeSTIncTempTime
mandatory
Probe short-term increasing temperature time used for rate of change alarms.
Values are represented in whole number minutes. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.14 |
|
emsProbeConfigProbeSTDecTempVariance
mandatory
Probe short-term decreasing temperature variance used for rate of change alarms.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Ce… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.15 |
|
emsProbeConfigProbeSTDecTempTime
mandatory
Probe short-term decreasing temperature time used for rate of change alarms.
Values are represented in whole number minutes. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.16 |
|
emsProbeConfigProbeLTIncTempVariance
mandatory
Probe long-term increasing temperature variance used for rate of change alarms.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Cel… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.17 |
|
emsProbeConfigProbeLTIncTempTime
mandatory
Probe long-term increasing temperature time used for rate of change alarms.
Values are represented in whole number hours. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.18 |
|
emsProbeConfigProbeLTDecTempVariance
mandatory
Probe long-term decreasing temperature variance used for rate of change alarms.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Cel… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.19 |
|
emsProbeConfigProbeLTDecTempTime
mandatory
Probe long-term decreasing temperature time used for rate of change alarms.
Values are represented in whole number hours. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.20 |
|
emsProbeConfigProbeMaxVoltThresh
mandatory
Probe maximum voltage threshold in tenths of Volts.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.21 |
|
emsProbeConfigProbeMinVoltThresh
mandatory
Probe minimum voltage threshold in tenths of Volts.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.7.1.1.22 |
.1.3.6.1.4.1.318.1.1.10.3.8.1
·
1 row entry
·
3 columns
Allows for configuration of individual input contacts. The number of entries is contained in the emsStatusInputContactCount OID.
The input contacts to configure.
Indexes
emsInputContactConfigInputContactIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsInputContactConfigInputContactIndex
mandatory
The index to the input contact entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.8.1.1.1 |
||||
|
emsInputContactConfigInputContactName
mandatory
The name of the input contact.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.8.1.1.2 |
||||
|
emsInputContactConfigInputContactNormalState
mandatory
Getting this variable will return the normal state of the input contact. If
the normal state is closed, the normallyClosedEMS (1) value will be returned. If the normal state is closed, the normallyOpenEMS (2) value will… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.8.1.1.3 |
.1.3.6.1.4.1.318.1.1.10.3.9.1
·
1 row entry
·
3 columns
Allows for configuration of individual output relays. The number of entries is contained in the emsStatusOutputRelayCount OID.
The output relays to configure.
Indexes
emsOutputRelayConfigOutputRelayIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsOutputRelayConfigOutputRelayIndex
mandatory
The index to the output relay entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.9.1.1.1 |
||||
|
emsOutputRelayConfigOutputRelayName
mandatory
The name of the output relay.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.9.1.1.2 |
||||
|
emsOutputRelayConfigOutputRelayNormalState
mandatory
Getting this variable will return the normal state of the output relay. If
the normal state is closed, the normallyClosedEMS (1) value will be returned. If the normal state is closed, the normallyOpenEMS (2) value will … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.9.1.1.3 |
.1.3.6.1.4.1.318.1.1.10.3.10.1
·
1 row entry
·
3 columns
Allows for configuration of individual outlets. The number of entries is contained in the emsStatusOutletCount OID.
The outlets to configure.
Indexes
emsOutletConfigOutletIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsOutletConfigOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.10.1.1.1 |
||||
|
emsOutletConfigOutletName
mandatory
The name of the outlet.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.10.1.1.2 |
||||
|
emsOutletConfigOutletNormalState
mandatory
Getting this variable will return the normal state of the outlet. If
the normal state is on, the normallyOnEMS (1) value will be returned. If the normal state is off, the normallyOffEMS (2) value will be returned. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.10.1.1.3 |
.1.3.6.1.4.1.318.1.1.10.3.11.1
·
1 row entry
·
5 columns
Allows for configuration of individual sensors. The number of entries is contained in the emsStatusSensorCount OID.
The sensors to configure.
Indexes
emsSensorConfigSensorIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsSensorConfigSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.11.1.1.1 |
||||
|
emsSensorConfigSensorSystemName
mandatory
The system name of the sensor. This describes the hardware system
intent of this sensor. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.11.1.1.2 |
||||
|
emsSensorConfigSensorUserName
mandatory
The name of the sensor as given by the system user.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.11.1.1.3 |
||||
|
emsSensorConfigSensorNormalState
mandatory
Getting this variable will return the normal state of the sensor. If
the normal state is closed, the normallyClosedEMS (1) value will be returned. If the normal state is closed, the normallyOpenEMS (2) value will be ret… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.11.1.1.4 |
||||
|
emsSensorConfigSensorAlarmDelay
mandatory
The delay (in seconds) after a sensor detects an alarm condition before the
condition is reported. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.11.1.1.5 |
.1.3.6.1.4.1.318.1.1.10.3.13.1
·
1 row entry
·
18 columns
Allows for access of individual probes. The number of entries is contained in the emsStatusProbeCount OID.
The probes to access.
Indexes
emsProbeStatusProbeIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsProbeStatusProbeIndex
mandatory
The index to the probe entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.1 |
||||||
|
emsProbeStatusProbeName
mandatory
The name of the probe.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.2 |
||||||
|
emsProbeStatusProbeTemperature
mandatory
Probe temperature reading.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.3 |
||||||
|
emsProbeStatusProbeHighTempThresh
mandatory
Probe high temperature threshold.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.4 |
||||||
|
emsProbeStatusProbeLowTempThresh
mandatory
Probe low temperature threshold.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.5 |
||||||
|
emsProbeStatusProbeHumidity
mandatory
Probe humidity reading.
Values are represented in whole number percentage. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.6 |
||||||
|
emsProbeStatusProbeHighHumidityThresh
mandatory
Probe high humidity threshold.
Values are represented in whole number percentage. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.7 |
||||||
|
emsProbeStatusProbeLowHumidityThresh
mandatory
Probe low humidity threshold.
Values are represented in whole number percentage. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.8 |
||||||
|
emsProbeStatusProbeSerialNumber
mandatory
A label indicating the type (Local[L] or Remote[R]) and Number
of the probe. For example, the first local probe would be L1 and the third remote probe would be R3. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.9 |
||||||
|
emsProbeStatusProbeCommStatus
mandatory
The state of communications to the probe.
commNeverDiscovered(1) indicates there has never been communications with this device. commsEstablished(2) indicates communication is normal and active with this device. commsLo… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.10 |
||||||
|
emsProbeStatusProbeAlarmStatus
mandatory
The alarm status of the probe. This integer should be interpreted
as a bit map, with each bit representing the presence or absence of the specific alarm conditions listed below. The bit will be '1' if the condition is… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.11 |
||||||
|
emsProbeStatusProbeMaxTempThresh
mandatory
Probe maximum temperature threshold.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.12 |
||||||
|
emsProbeStatusProbeMinTempThresh
mandatory
Probe minimum temperature threshold.
Values are represented in whole number degrees. Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.13 |
||||||
|
emsProbeStatusProbeMaxHumidityThresh
mandatory
Probe maximum humidity threshold.
Values are represented in whole number percentage. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.14 |
||||||
|
emsProbeStatusProbeMinHumidityThresh
mandatory
Probe minimum humidity threshold.
Values are represented in whole number percentage. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.15 |
||||||
|
emsProbeStatusProbeVoltage
mandatory
Probe voltage reading.
Values are displayed in tenths of Volts DC. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.16 |
||||||
|
emsProbeStatusProbeMaxVoltThresh
mandatory
Probe maximum voltage threshold in Volts.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.17 |
||||||
|
emsProbeStatusProbeMinVoltThresh
mandatory
Probe minimum voltage threshold in Volts.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.13.1.1.18 |
.1.3.6.1.4.1.318.1.1.10.3.14.1
·
1 row entry
·
4 columns
Allows for access of individual input contacts. The number of entries is contained in the emsStatusInputContactCount OID.
The input contacts to access.
Indexes
emsInputContactStatusInputContactIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsInputContactStatusInputContactIndex
mandatory
The index to the input contact entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.14.1.1.1 |
||||
|
emsInputContactStatusInputContactName
mandatory
The name of the input contact.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.14.1.1.2 |
||||
|
emsInputContactStatusInputContactState
mandatory
Getting this variable will return the state of the input contact. If
the input contact is closed, the contactClosedEMS (1) value will be returned. If the input contact state is open, the contactOpenEMS (2) value will be… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.14.1.1.3 |
||||
|
emsInputContactStatusInputContactNormalState
mandatory
Getting this variable will return the normal state of the input contact. If
the normal state is closed, the normallyClosedEMS (1) value will be returned. If the normal state is open, the normallyOpenEMS (2) value will b… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.14.1.1.4 |
.1.3.6.1.4.1.318.1.1.10.3.15.1
·
1 row entry
·
4 columns
Allows for access of individual output relays. The number of entries is contained in the emsStatusOutputRelayCount OID.
The output relays to access.
Indexes
emsOutputRelayStatusOutputRelayIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsOutputRelayStatusOutputRelayIndex
mandatory
The index to the output relay entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.15.1.1.1 |
||||
|
emsOutputRelayStatusOutputRelayName
mandatory
The name of the output relay.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.15.1.1.2 |
||||
|
emsOutputRelayStatusOutputRelayState
mandatory
Getting this variable will return the state of the output relay. If
the output relay is closed, the relayClosedEMS (1) value will be returned. If the output relay is open, the relayOpenEMS (2) value will be returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.15.1.1.3 |
||||
|
emsOutputRelayStatusOutputRelayNormalState
mandatory
Getting this variable will return the normal state of the output relay. If
the normal state is closed, the normallyClosedEMS (1) value will be returned. If the normal state is open, the normallyOpenEMS (2) value will be… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.15.1.1.4 |
.1.3.6.1.4.1.318.1.1.10.3.16.1
·
1 row entry
·
4 columns
Allows for access of individual outlets. The number of entries is contained in the emsStatusOutletCount OID.
The outlets to access.
Indexes
emsOutletStatusOutletIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
emsOutletStatusOutletIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.16.1.1.1 |
||||
|
emsOutletStatusOutletName
mandatory
The name of the outlet.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.16.1.1.2 |
||||
|
emsOutletStatusOutletState
mandatory
Getting this variable will return the state of the outlet. If
the outlet is on, the outletOnEMS (1) value will be returned. If the outlet is off, the outletOffEMS (2) value will be returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.16.1.1.3 |
||||
|
emsOutletStatusOutletNormalState
mandatory
Getting this variable will return the normal state of the outlet. If
the normal state is on, the normallyOnEMS (1) value will be returned. If the normal state is off, the normallyOffEMS (2) value will be returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.16.1.1.4 |
.1.3.6.1.4.1.318.1.1.10.3.17.1
·
1 row entry
·
3 columns
Allows for access of individual alarm devices. The number of entries is contained in the emsStatusAlarmDeviceCount OID.
The alarm devices to access.
Indexes
emsAlarmDeviceStatusDeviceIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsAlarmDeviceStatusDeviceIndex
mandatory
The index to the alarm device entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.17.1.1.1 |
||||||
|
emsAlarmDeviceStatusDeviceName
mandatory
The name of the alarm device.
This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.17.1.1.2 |
||||||
|
emsAlarmDeviceStatusDeviceState
mandatory
Getting this variable will return the device state. If
the device is active, the alarmDeviceOnEMS (1) value will be returned. If the device is inactive, the alarmDeviceOffEMS (2) value will be returned. If the device i… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.17.1.1.3 |
.1.3.6.1.4.1.318.1.1.10.3.18.1
·
1 row entry
·
6 columns
Allows for access of individual sensors. The number of entries is contained in the emsStatusSensorCount OID.
The sensors to access.
Indexes
emsSensorStatusSensorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsSensorStatusSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.18.1.1.1 |
||||||
|
emsSensorStatusSensorSystemName
mandatory
The system name of the sensor. This describes the hardware system
intent of this sensor. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.18.1.1.2 |
||||||
|
emsSensorStatusSensorName
mandatory
The name of the sensor as given by the system user.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.18.1.1.3 |
||||||
|
emsSensorStatusSensorState
mandatory
Getting this variable will return the sensor state. If the sensor is faulted,
the sensorFaultedEMS (1) value will be returned. If the sensor is not faulted, the sensorOKEMS (2) value will be returned. If the sensor is n… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.18.1.1.4 |
||||||
|
emsSensorStatusSensorNormalState
mandatory
Getting this variable will return the normal state of the sensor. If
the normal state is closed, the normallyClosedEMS (1) value will be returned. If the normal state is closed, the normallyOpenEMS (2) value will be ret… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.18.1.1.5 |
||||||
|
emsSensorStatusSensorAlarmDelay
mandatory
The delay (in seconds) after a sensor detects an alarm condition before the
condition is reported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.18.1.1.6 |
.1.3.6.1.4.1.318.1.1.10.3.19.1
·
1 row entry
·
4 columns
Allows for the configuration of individual sensors.
The sensors to configure.
Indexes
emsSmokeSensorConfigSensorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsSmokeSensorConfigSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.19.1.1.1 |
||||||
|
emsSmokeSensorConfigSensorName
mandatory
The user defined name of the smoke sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.1.1.2 |
||||||
|
emsSmokeSensorConfigSensorLocation
mandatory
The user defined location of the smoke sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.1.1.3 |
||||||
|
emsSmokeSensorConfigSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the smoke sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.19.1.1.4 |
.1.3.6.1.4.1.318.1.1.10.3.19.2
·
1 row entry
·
4 columns
Allows for the configuration of individual sensors.
The sensors to configure.
Indexes
emsVibrationSensorConfigSensorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsVibrationSensorConfigSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.19.2.1.1 |
||||||
|
emsVibrationSensorConfigSensorName
mandatory
The user defined name of the vibration sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.2.1.2 |
||||||
|
emsVibrationSensorConfigSensorLocation
mandatory
The user defined location of the vibration sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.2.1.3 |
||||||
|
emsVibrationSensorConfigSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the vibration sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.19.2.1.4 |
.1.3.6.1.4.1.318.1.1.10.3.19.3
·
1 row entry
·
4 columns
Allows for the configuration of individual sensors.
The sensors to configure.
Indexes
emsFluidSensorConfigSensorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsFluidSensorConfigSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.19.3.1.1 |
||||||
|
emsFluidSensorConfigSensorName
mandatory
The user defined name of the fluid sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.3.1.2 |
||||||
|
emsFluidSensorConfigSensorLocation
mandatory
The user defined location of the fluid sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.3.1.3 |
||||||
|
emsFluidSensorConfigSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the fluid sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.19.3.1.4 |
.1.3.6.1.4.1.318.1.1.10.3.19.4
·
1 row entry
·
4 columns
Allows for the configuration of individual sensors.
The sensors to configure.
Indexes
emsDoorSensorConfigSensorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsDoorSensorConfigSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.19.4.1.1 |
||||||
|
emsDoorSensorConfigSensorName
mandatory
The user defined name of the door sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.4.1.2 |
||||||
|
emsDoorSensorConfigSensorLocation
mandatory
The user defined location of the door sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.4.1.3 |
||||||
|
emsDoorSensorConfigSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the door sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.19.4.1.4 |
.1.3.6.1.4.1.318.1.1.10.3.19.5
·
1 row entry
·
4 columns
Allows for the configuration of an individual leak rope.
The leak rope to configure.
Indexes
emsLeakRopeConfigIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
emsLeakRopeConfigIndex
mandatory
The index of the leak rope entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.19.5.1.1 |
||||||||||
|
emsLeakRopeConfigName
mandatory
The user-defined name of the leak rope.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.5.1.2 |
||||||||||
|
emsLeakRopeConfigLocation
mandatory
The user-defined location of the leak rope.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.19.5.1.3 |
||||||||||
|
emsLeakRopeConfigSeverity
mandatory
The severity of the alarm that will be triggered when the leak rope is activated.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.19.5.1.4 |
.1.3.6.1.4.1.318.1.1.10.3.20.2
·
1 row entry
·
6 columns
Allows for the access of individual sensors.
The sensor to access.
Indexes
emsSmokeSensorStatusSensorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsSmokeSensorStatusSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.20.2.1.1 |
||||||
|
emsSmokeSensorStatusSensorName
mandatory
The user defined name of the smoke sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.2.1.2 |
||||||
|
emsSmokeSensorStatusSensorLocation
mandatory
The user defined location of the smoke sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.2.1.3 |
||||||
|
emsSmokeSensorStatusSensorState
mandatory
The state of the smoke sensor.
smokeDetected (1) indicates there is smoke. noSmoke (2) indicates there is no smoke. unknown (3) indicates the state is unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.2.1.4 |
||||||
|
emsSmokeSensorStatusSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the smoke sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.2.1.5 |
||||||
|
emsSmokeSensorCommStatus
mandatory
The communication status of the smoke sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.2.1.6 |
.1.3.6.1.4.1.318.1.1.10.3.20.4
·
1 row entry
·
6 columns
Allows for the access of individual sensors.
The sensor to access.
Indexes
emsVibrationSensorStatusSensorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsVibrationSensorStatusSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.20.4.1.1 |
||||||
|
emsVibrationSensorStatusSensorName
mandatory
The user defined name of the vibration sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.4.1.2 |
||||||
|
emsVibrationSensorStatusSensorLocation
mandatory
The user defined location of the vibration sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.4.1.3 |
||||||
|
emsVibrationSensorStatusSensorState
mandatory
The state of the vibration sensor.
vibrationDetected (1) indicates there is vibration. noVibration (2) indicates there is no vibration. unknown (3) indicates the state is unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.4.1.4 |
||||||
|
emsVibrationSensorStatusSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the vibration sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.4.1.5 |
||||||
|
emsVibrationSensorCommStatus
mandatory
The communication status of the vibration sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.4.1.6 |
.1.3.6.1.4.1.318.1.1.10.3.20.6
·
1 row entry
·
6 columns
Allows for the access of individual sensors.
The sensors to access.
Indexes
emsFluidSensorStatusSensorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsFluidSensorStatusSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.20.6.1.1 |
||||||
|
emsFluidSensorStatusSensorName
mandatory
The user defined name of the fluid sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.6.1.2 |
||||||
|
emsFluidSensorStatusSensorLocation
mandatory
The user defined location of the fluid sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.6.1.3 |
||||||
|
emsFluidSensorStatusSensorState
mandatory
The state of the fluid sensor.
fluidDetected (1) indicates there is fluid leak. noFluid (2) indicates there is no fluid leak. unknown (3) indicates the state is unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.6.1.4 |
||||||
|
emsFluidSensorStatusSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the fluid sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.6.1.5 |
||||||
|
emsFluidSensorCommStatus
mandatory
The communication status of the fluid sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.6.1.6 |
.1.3.6.1.4.1.318.1.1.10.3.20.8
·
1 row entry
·
6 columns
Allows for the access of individual sensors.
The sensor to access.
Indexes
emsDoorSensorStatusSensorIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
emsDoorSensorStatusSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.20.8.1.1 |
||||||
|
emsDoorSensorStatusSensorName
mandatory
The user defined name of the door sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.8.1.2 |
||||||
|
emsDoorSensorStatusSensorLocation
mandatory
The user defined location of the door sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.8.1.3 |
||||||
|
emsDoorSensorStatusSensorState
mandatory
The state of the door sensor.
open (1) indicates door open. closed (2) indicates door closed. unknown (3) indicates the state is unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.8.1.4 |
||||||
|
emsDoorSensorStatusSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the door sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.8.1.5 |
||||||
|
emsDoorSensorCommStatus
mandatory
The communication status of the door sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.8.1.6 |
.1.3.6.1.4.1.318.1.1.10.3.20.10
·
1 row entry
·
6 columns
Allows for the access of individual leak ropes.
The leak rope to access.
Indexes
emsLeakRopeStatusIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
emsLeakRopeStatusIndex
mandatory
The index of the leak rope entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.3.20.10.1.1 |
||||||||||
|
emsLeakRopeStatusName
mandatory
The user defined name of the leak rope.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.10.1.2 |
||||||||||
|
emsLeakRopeStatusLocation
mandatory
The user defined location of the leak rope.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.3.20.10.1.3 |
||||||||||
|
emsLeakRopeStatusState
mandatory
The state of the leak rope.
The values can be noleak(1), leakdetected(2), or unknown(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.10.1.4 |
||||||||||
|
emsLeakRopeStatusSeverity
mandatory
The severity of the alarm that will be triggered when the leak rope is activated.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.10.1.5 |
||||||||||
|
emsLeakRopeCommStatus
mandatory
The communication status of the leak rope.
The values can be connected(1), disconnected(2), or commsLost(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.3.20.10.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.1.2
·
1 row entry
·
7 columns
Allows for getting status information from the modules attached to the system.
The unit to get data from.
Indexes
memModulesStatusModuleNumber
| Column | Syntax | OID |
|---|---|---|
|
memModulesStatusModuleNumber
mandatory
The module number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.1.2.1.1 |
|
memModulesStatusModuleName
mandatory
The module name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.1.2.1.2 |
|
memModulesStatusModuleLocation
mandatory
The location of the module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.1.2.1.3 |
|
memModulesStatusModelNumber
mandatory
The model number of the module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.1.2.1.4 |
|
memModulesStatusSerialNumber
mandatory
The serial number of the module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.1.2.1.5 |
|
memModulesStatusFirmwareRev
mandatory
The firmware revision of the module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.1.2.1.6 |
|
memModulesStatusHardwareRev
mandatory
The hardware revision.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.1.2.1.7 |
.1.3.6.1.4.1.318.1.1.10.4.1.4
·
1 row entry
·
3 columns
Allows for getting status information from the modules attached to the system.
The unit to get data from.
Indexes
memModulesConfigModuleNumber
| Column | Syntax | OID |
|---|---|---|
|
memModulesConfigModuleNumber
mandatory
The module number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.1.4.1.1 |
|
memModulesConfigModuleName
mandatory
The module name.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.1.4.1.2 |
|
memModulesConfigModuleLocation
mandatory
The location of the module.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.1.4.1.3 |
.1.3.6.1.4.1.318.1.1.10.4.2.3
·
1 row entry
·
10 columns
Allows for getting sensor status information.
The unit to get data from.
Indexes
memSensorsStatusModuleNumber memSensorsStatusSensorNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memSensorsStatusModuleNumber
mandatory
The number of the module that the sensor is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.1 |
||||||
|
memSensorsStatusSensorNumber
mandatory
The number of this sensor on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.2 |
||||||
|
memSensorsStatusSensorName
mandatory
The sensor name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.3 |
||||||
|
memSensorsStatusSensorLocation
mandatory
The location of the sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.4 |
||||||
|
memSensorsTemperature
mandatory
The sensor's current temperature reading.
Units are displayed in the scale shown in the memSensorsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.5 |
||||||
|
memSensorsHumidity
mandatory
The current humidity reading from the sensor.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.6 |
||||||
|
memSensorsCommStatus
mandatory
The communications status of the sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.7 |
||||||
|
memSensorsAlarmStatus
mandatory
The alarm status of the sensor.
memWarning is not applicable to voltage sensor. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.8 |
||||||
|
memSensorsTemperatureHighPrec
mandatory
The current temperature is displayed in tenths of degrees in the scale
shown in the memSensorsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.9 |
||||||
|
memSensorsVoltage
mandatory
The sensor's current voltage reading.
Values are displayed in tenths of Volts DC. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.3.1.10 |
.1.3.6.1.4.1.318.1.1.10.4.2.5
·
1 row entry
·
25 columns
Allows for getting configuration information from sensors attached to the system.
The unit to get data from.
Indexes
memSensorsConfigModuleNumber memSensorsConfigSensorNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
memSensorsConfigModuleNumber
mandatory
The number of the module that the sensor is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.1 |
||||
|
memSensorsConfigSensorNumber
mandatory
The number of this sensor on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.2 |
||||
|
memSensorsName
mandatory
A descriptive name for the sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.3 |
||||
|
memSensorsLocation
mandatory
The location of the sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.4 |
||||
|
memSensorsAlarmGeneration
mandatory
Enable or disable alarm generation on this sensor.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.5 |
||||
|
memSensorsTempMaxThresh
mandatory
The temperature at which the MEM will generate a maximum
temperature threshold violation alarm on this sensor. The temperature scale is based on the memSensorsStatusSysTempUnits OID. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.6 |
||||
|
memSensorsTempHighThresh
mandatory
The temperature at which the MEM will generate a high
temperature threshold violation alarm on this sensor. The temperature scale is based on the memSensorsStatusSysTempUnits OID. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.7 |
||||
|
memSensorsTempLowThresh
mandatory
The temperature at which the MEM will generate a low
temperature threshold violation alarm on this sensor. The temperature scale is based on the memSensorsStatusSysTempUnits OID. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.8 |
||||
|
memSensorsTempMinThresh
mandatory
The temperature at which the MEM will generate a minimum
temperature threshold violation alarm on this sensor. The temperature scale is based on the memSensorsStatusSysTempUnits OID. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.9 |
||||
|
memSensorsTempThreshHysteresis
mandatory
The change in temperature required to cause a
temperature alarm to change from an active to an inactive state. The temperature scale is based on the memSensorsStatusSysTempUnits OID. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.10 |
||||
|
memSensorsTempShortDecRateThreshValue
mandatory
The value of the temperature short-term decreasing rate
time that will cause an alarm to be generated. The temperature scale is based on the memSensorsStatusSysTempUnits OID. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.11 |
||||
|
memSensorsTempShortDecRateThreshTime
mandatory
The time over which the temperature may not decrease
beyond the value specified by the temperature short-term decreasing rate threshold value. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.12 |
||||
|
memSensorsTempShortIncRateThreshValue
mandatory
The value of the temperature short-term increasing rate
time that will cause an alarm to be generated. The temperature scale is based on the memSensorsStatusSysTempUnits OID. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.13 |
||||
|
memSensorsTempShortIncRateThreshTime
mandatory
The time over which the temperature may not increase
beyond the value specified by the temperature short-term increasing rate threshold value. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.14 |
||||
|
memSensorsTempLongDecRateThreshValue
mandatory
The value of the temperature long-term decreasing rate
time that will cause an alarm to be generated. The temperature scale is based on the memSensorsStatusSysTempUnits OID. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.15 |
||||
|
memSensorsTempLongDecRateThreshTime
mandatory
The time over which the temperature may not decrease
beyond the value specified by the temperature long-term decreasing rate threshold value. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.16 |
||||
|
memSensorsTempLongIncRateThreshValue
mandatory
The value of the temperature long-term increasing rate
time that will cause an alarm to be generated. The temperature scale is based on the memSensorsStatusSysTempUnits OID. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.17 |
||||
|
memSensorsTempLongIncRateThreshTime
mandatory
The time over which the temperature may not increase
beyond the value specified by the temperature long-term increasing rate threshold value. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.18 |
||||
|
memSensorsHumidityMaxThresh
mandatory
The humidity at which the maximum humidity threshold alarm
will be generated. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.19 |
||||
|
memSensorsHumidityHighThresh
mandatory
The humidity at which the high humidity threshold alarm
will be generated. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.20 |
||||
|
memSensorsHumidityLowThresh
mandatory
The humidity at which the low humidity threshold alarm
will be generated. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.21 |
||||
|
memSensorsHumidityMinThresh
mandatory
The humidity at which the minimum humidity threshold alarm
will be generated. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.22 |
||||
|
memSensorsHumidityThreshHysteresis
mandatory
The change in humidity required to cause an active humidity
alarm to change to the inactive state. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.23 |
||||
|
memSensorsVoltMaxThresh
mandatory
The voltage in tenths of volts at which the MEM will generate a maximum
voltage threshold violation alarm on this sensor. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.24 |
||||
|
memSensorsVoltMinThresh
mandatory
The voltage in tenths of volts at which the MEM will generate a minimum
voltage threshold violation alarm on this sensor. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.25 |
.1.3.6.1.4.1.318.1.1.10.4.3.2
·
1 row entry
·
8 columns
Allows for getting input status information.
The unit to get data from.
Indexes
memInputsStatusModuleNumber memInputsStatusInputNumber
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
memInputsStatusModuleNumber
mandatory
The number of the module that the input is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.3.2.1.1 |
||||||||
|
memInputsStatusInputNumber
mandatory
The number of this input on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.3.2.1.2 |
||||||||
|
memInputsStatusInputName
mandatory
The input name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.2.1.3 |
||||||||
|
memInputsStatusInputLocation
mandatory
The location of the input.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.2.1.4 |
||||||||
|
memInputsStatusCurrentState
mandatory
The current state of the input. This OID will return
inputStateNotAplicable(4) for analog input types. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.3.2.1.5 |
||||||||
|
memInputsStatusCurrentAnalogValue
mandatory
The current analog value of the input in the units defined
by the user. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.2.1.6 |
||||||||
|
memInputsStatusAlarmStatus
mandatory
The alarm status of the input.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.3.2.1.7 |
||||||||
|
memInputsCommStatus
mandatory
The communications status of the input. This OID is only supported by NBRK0200.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.3.2.1.8 |
.1.3.6.1.4.1.318.1.1.10.4.3.4
·
1 row entry
·
25 columns
Allows for getting input configuration information.
The unit to get data from.
Indexes
memInputsConfigModuleNumber memInputsConfigInputNumber
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
memInputsConfigModuleNumber
mandatory
The number of the module that the input is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.1 |
||||||||||
|
memInputsConfigInputNumber
mandatory
The number of this input on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.2 |
||||||||||
|
memInputName
mandatory
The name of the input.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.3 |
||||||||||
|
memInputLocation
mandatory
The location of the input.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.4 |
||||||||||
|
memInputType
mandatory
The type of input this contact will take.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.5 |
||||||||||
|
memInputAlarmGeneration
mandatory
Enable or disable alarm generation on this input.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.6 |
||||||||||
|
memInputNormalState
mandatory
Defines the normal (no alarm) state of the input.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.7 |
||||||||||
|
memInputAbnormalSeverity
mandatory
Defines the severity of the event that is associated
with the abnormal state of the input. This OID will return inputSeverityNotApplicable(4) for analog input types. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.8 |
||||||||||
|
memInputNumberCalibrationPoints
mandatory
The number of calibration points that are required for
this input. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.9 |
||||||||||
|
memInputAnalogCalibrationPoint1
mandatory
The electrical value that the input sensor will measure at the
first calibration point. This OID is relevant only for inputs configured as analog type (ma or V). |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.10 |
||||||||||
|
memInputAnalogCalibrationPoint2
mandatory
The electrical value that the input sensor will measure at the
second calibration point. This OID is relevant only for inputs configured as analog type (ma or V). |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.11 |
||||||||||
|
memInputAnalogCalibrationPoint3
mandatory
The electrical value that the input sensor will measure at the
third calibration point. This OID is relevant only for inputs configured as analog type (ma or V). |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.12 |
||||||||||
|
memInputAnalogCalibrationPoint4
mandatory
The electrical value that the input sensor will measure at the
fourth calibration point. This OID is relevant only for inputs configured as analog type (ma or V). |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.13 |
||||||||||
|
memInputAnalogCalibrationPoint5
mandatory
The electrical value that the input sensor will measure at the
fifth calibration point. This OID is relevant only for inputs configured as analog type (ma or V). |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.14 |
||||||||||
|
memInputAnalogCalibrationPoint1Value
mandatory
The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the first calibration point. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.15 |
||||||||||
|
memInputAnalogCalibrationPoint2Value
mandatory
The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the second calibration point. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.16 |
||||||||||
|
memInputAnalogCalibrationPoint3Value
mandatory
The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the third calibration point. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.17 |
||||||||||
|
memInputAnalogCalibrationPoint4Value
mandatory
The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the fourth calibration point. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.18 |
||||||||||
|
memInputAnalogCalibrationPoint5Value
mandatory
The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the fifth calibration point. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.19 |
||||||||||
|
memInputAnalogMeasurementUnits
mandatory
The units of measure to be used for this input.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.20 |
||||||||||
|
memInputAnalogMaxThresh
mandatory
The input value at which a maximum threshold violation
alarm will be generated on this input. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.21 |
||||||||||
|
memInputAnalogHighThresh
mandatory
The input value at which a high threshold violation
alarm will be generated on this input. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.22 |
||||||||||
|
memInputAnalogLowThresh
mandatory
The input value at which a low threshold violation
alarm will be generated on this input. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.23 |
||||||||||
|
memInputAnalogMinThresh
mandatory
The input value at which a minimum threshold violation
alarm will be generated on this input. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.24 |
||||||||||
|
memInputAnalogThreshHysteresis
mandatory
The change in value required to cause an alarm on this input
to change from active to inactive. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.25 |
.1.3.6.1.4.1.318.1.1.10.4.4.2
·
1 row entry
·
6 columns
Allows for getting output status information.
The unit to get data from.
Indexes
memOutputStatusModuleNumber memOutputStatusOutputNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
memOutputStatusModuleNumber
mandatory
The number of the module that the output is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.4.2.1.1 |
||||
|
memOutputStatusOutputNumber
mandatory
The number of this output on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.4.2.1.2 |
||||
|
memOutputStatusOutputName
mandatory
The output name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.4.2.1.3 |
||||
|
memOutputStatusOutputLocation
mandatory
The location of the output.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.4.2.1.4 |
||||
|
memOutputStatusCurrentState
mandatory
The state of the output.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.4.2.1.5 |
||||
|
memOutputStatusAlarmState
mandatory
The alarm state of the output.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.4.2.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.4.4
·
1 row entry
·
6 columns
Allows for getting output configuration information.
The unit to get data from.
Indexes
memOutputConfigModuleNumber memOutputConfigOutputNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
memOutputConfigModuleNumber
mandatory
The number of the module that the output is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.4.4.1.1 |
||||
|
memOutputConfigOutputNumber
mandatory
The number of this output on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.4.4.1.2 |
||||
|
memOutputName
mandatory
The name of the output.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.4.4.1.3 |
||||
|
memOutputLocation
mandatory
The location of the output.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.4.4.1.4 |
||||
|
memOutputNormalState
mandatory
The state of the output that will not generate an alarm.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.4.4.1.5 |
||||
|
memOutputAction
mandatory
Manual control actions for the output. SNMP get command will return the state
of the output, SNMP set of this OID controls the output. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.4.4.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.5.2
·
1 row entry
·
6 columns
Allows for getting outlet status information.
The unit to get data from.
Indexes
memOutletStatusModuleNumber memOutletStatusOutletNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
memOutletStatusModuleNumber
mandatory
The number of the module that the outlet is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.5.2.1.1 |
||||
|
memOutletStatusOutletNumber
mandatory
The number of this outlet on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.5.2.1.2 |
||||
|
memOutletStatusOutletName
mandatory
The outlet name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.5.2.1.3 |
||||
|
memOutletStatusOutletLocation
mandatory
The location of the outlet.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.5.2.1.4 |
||||
|
memOutletStatusCurrentState
mandatory
The state of the outlet.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.5.2.1.5 |
||||
|
memOutletStatusAlarmState
mandatory
The alarm state of the outlet.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.5.2.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.5.4
·
1 row entry
·
6 columns
Allows for getting outlet configuration information.
The unit to get data from.
Indexes
memOutletConfigModuleNumber memOutletConfigOutletNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
memOutletConfigModuleNumber
mandatory
The number of the module that the Outlet is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.5.4.1.1 |
||||
|
memOutletConfigOutletNumber
mandatory
The number of this Outlet on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.5.4.1.2 |
||||
|
memOutletName
mandatory
The name of the Outlet.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.5.4.1.3 |
||||
|
memOutletLocation
mandatory
The location of the Outlet.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.5.4.1.4 |
||||
|
memOutletNormalState
mandatory
The state of the Outlet that will not generate an alarm.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.5.4.1.5 |
||||
|
memOutletAction
mandatory
Manual control actions for the Outlet. Get displays state
of outlet, set controls outlet. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.5.4.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.6.2
·
1 row entry
·
6 columns
Allows for getting beacon status information.
The unit to get data from.
Indexes
memBeaconStatusModuleNumber memBeaconStatusBeaconNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
memBeaconStatusModuleNumber
mandatory
The number of the module that the beacon is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.6.2.1.1 |
||||
|
memBeaconStatusBeaconNumber
mandatory
The number of this beacon on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.6.2.1.2 |
||||
|
memBeaconStatusBeaconName
mandatory
The beacon name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.6.2.1.3 |
||||
|
memBeaconStatusBeaconLocation
mandatory
The location of the beacon.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.6.2.1.4 |
||||
|
memBeaconStatusCurrentState
mandatory
The state of the beacon.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.6.2.1.5 |
||||
|
memBeaconStatusAlarmState
mandatory
The alarm state of the beacon.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.6.2.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.6.4
·
1 row entry
·
5 columns
Allows for getting beacon configuration information.
The unit to get data from.
Indexes
memBeaconConfigModuleNumber memBeaconConfigBeaconNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
memBeaconConfigModuleNumber
mandatory
The number of the module that the beacon is attached to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.6.4.1.1 |
||||
|
memBeaconConfigBeaconNumber
mandatory
The number of this beacon on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.6.4.1.2 |
||||
|
memBeaconConfigName
mandatory
The name of the beacon.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.6.4.1.3 |
||||
|
memBeaconConfigLocation
mandatory
The location of the beacon.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.6.4.1.4 |
||||
|
memBeaconAction
mandatory
Control action (on/off) for the beacon. Setting this OID will turn the
beacon on/off. Getting this OID will respond with the current state. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.6.4.1.5 |
.1.3.6.1.4.1.318.1.1.10.4.7.2
·
1 row entry
·
8 columns
Allows for the access of individual sensors.
The sensor to access.
Indexes
memSmokeSensorStatusModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memSmokeSensorStatusModuleIndex
mandatory
The index to the module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.2.1.1 |
||||||
|
memSmokeSensorStatusSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.2.1.2 |
||||||
|
memSmokeSensorStatusSensorName
mandatory
The user defined name of the smoke sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.2.1.3 |
||||||
|
memSmokeSensorStatusSensorLocation
mandatory
The user defined location of the smoke sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.2.1.4 |
||||||
|
memSmokeSensorStatusSensorState
mandatory
The state of the smoke sensor.
smokeDetected (1) indicates there is smoke. noSmoke (2) indicates there is no smoke. unknown (3) indicates the state is unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.2.1.5 |
||||||
|
memSmokeSensorStatusSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the smoke sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.2.1.6 |
||||||
|
memSmokeStatusAlarmStatus
mandatory
The alarm status of the smoke sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.2.1.7 |
||||||
|
memSmokeSensorCommStatus
mandatory
The communication status of the smoke sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.2.1.8 |
.1.3.6.1.4.1.318.1.1.10.4.7.4
·
1 row entry
·
8 columns
Allows for the access of individual sensors.
The sensors to access.
Indexes
memVibrationSensorStatusModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memVibrationSensorStatusModuleIndex
mandatory
The index to the sensor module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.4.1.1 |
||||||
|
memVibrationSensorStatusSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.4.1.2 |
||||||
|
memVibrationSensorStatusSensorName
mandatory
The user defined name of the vibration sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.4.1.3 |
||||||
|
memVibrationSensorStatusSensorLocation
mandatory
The user defined location of the vibration sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.4.1.4 |
||||||
|
memVibrationSensorStatusSensorState
mandatory
The state of the vibration sensor.
vibrationDetected (1) indicates there is vibration. noVibration (2) indicates there is no vibration. unknown (3) indicates the state is unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.4.1.5 |
||||||
|
memVibrationSensorStatusSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the vibration sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.4.1.6 |
||||||
|
memVibrationStatusAlarmStatus
mandatory
The alarm status of the vibration sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.4.1.7 |
||||||
|
memVibrationSensorCommStatus
mandatory
The communication status of the vibration sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.4.1.8 |
.1.3.6.1.4.1.318.1.1.10.4.7.6
·
1 row entry
·
8 columns
Allows for access of individual sensors.
The sensor to access.
Indexes
memFluidSensorStatusModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memFluidSensorStatusModuleIndex
mandatory
The index to the sensor module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.6.1.1 |
||||||
|
memFluidSensorStatusSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.6.1.2 |
||||||
|
memFluidSensorStatusSensorName
mandatory
The user defined name of the fluid sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.6.1.3 |
||||||
|
memFluidSensorStatusSensorLocation
mandatory
The user defined location of the fluid sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.6.1.4 |
||||||
|
memFluidSensorStatusSensorState
mandatory
The state of the fluid sensor.
fluidDetected (1) indicates there is fluid leak. noFluid (2) indicates there is no fluid leak. unknown (3) indicates the state is unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.6.1.5 |
||||||
|
memFluidSensorStatusSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the fluid sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.6.1.6 |
||||||
|
memFluidStatusAlarmStatus
mandatory
The alarm status of the fluid sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.6.1.7 |
||||||
|
memFluidSensorCommStatus
mandatory
The communication status of the fluid sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.6.1.8 |
.1.3.6.1.4.1.318.1.1.10.4.7.8
·
1 row entry
·
8 columns
Allows for the access of individual sensors.
The sensor to access.
Indexes
memDoorSensorStatusModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memDoorSensorStatusModuleIndex
mandatory
The index to the sensor module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.8.1.1 |
||||||
|
memDoorSensorStatusSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.8.1.2 |
||||||
|
memDoorSensorStatusSensorName
mandatory
The user defined name of the door sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.8.1.3 |
||||||
|
memDoorSensorStatusSensorLocation
mandatory
The user defined location of the door sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.8.1.4 |
||||||
|
memDoorSensorStatusSensorState
mandatory
The state of the door sensor.
open (1) indicates door open. closed (2) indicates door closed. unknown (3) indicates the state is unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.8.1.5 |
||||||
|
memDoorSensorStatusSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the door sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.8.1.6 |
||||||
|
memDoorStatusAlarmStatus
mandatory
The alarm status of the door sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.8.1.7 |
||||||
|
memDoorSensorCommStatus
mandatory
The communication status of the door sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.8.1.8 |
.1.3.6.1.4.1.318.1.1.10.4.7.9
·
1 row entry
·
6 columns
Allows for the configuration of individual sensors.
The sensors to configure.
Indexes
memSmokeSensorConfigSensorModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memSmokeSensorConfigSensorModuleIndex
mandatory
The index to the sensor module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.9.1.1 |
||||||
|
memSmokeSensorConfigSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.9.1.2 |
||||||
|
memSmokeSensorConfigSensorName
mandatory
The user defined name of the smoke sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.9.1.3 |
||||||
|
memSmokeSensorConfigSensorLocation
mandatory
The user defined location of the smoke sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.9.1.4 |
||||||
|
memSmokeSensorConfigSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the smoke sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.9.1.5 |
||||||
|
memSmokeSensorConfigAlarmGeneration
mandatory
Enable or disable alarm generation on this input.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.9.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.7.10
·
1 row entry
·
6 columns
Allows for the configuration of individual sensors.
The sensor to configure.
Indexes
memVibrationSensorModuleConfigIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memVibrationSensorModuleConfigIndex
mandatory
The index to the sensor module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.10.1.1 |
||||||
|
memVibrationSensorConfigSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.10.1.2 |
||||||
|
memVibrationSensorConfigSensorName
mandatory
The user defined name of the vibration sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.10.1.3 |
||||||
|
memVibrationSensorConfigSensorLocation
mandatory
The user defined location of the vibration sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.10.1.4 |
||||||
|
memVibrationSensorConfigSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the vibration sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.10.1.5 |
||||||
|
memVibrationSensorConfigAlarmGeneration
mandatory
Enable or disable alarm generation on this input.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.10.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.7.11
·
1 row entry
·
6 columns
Allows for the configuration of individual sensors.
The sensor to configure.
Indexes
memFluidSensorModuleConfigIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memFluidSensorModuleConfigIndex
mandatory
The index to the sensor module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.11.1.1 |
||||||
|
memFluidSensorConfigSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.11.1.2 |
||||||
|
memFluidSensorConfigSensorName
mandatory
The user defined name of the fluid sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.11.1.3 |
||||||
|
memFluidSensorConfigSensorLocation
mandatory
The user defined location of the fluid sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.11.1.4 |
||||||
|
memFluidSensorConfigSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the fluid sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.11.1.5 |
||||||
|
memFluidSensorConfigAlarmGeneration
mandatory
Enable or disable alarm generation on this input.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.11.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.7.12
·
1 row entry
·
6 columns
Allows for the configuration of individual sensors.
The sensors to configure.
Indexes
memDoorSensorModuleConfigIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memDoorSensorModuleConfigIndex
mandatory
The index to the sensor module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.12.1.1 |
||||||
|
memDoorSensorConfigSensorIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.12.1.2 |
||||||
|
memDoorSensorConfigSensorName
mandatory
The user defined name of the door sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.12.1.3 |
||||||
|
memDoorSensorConfigSensorLocation
mandatory
The user defined location of the door sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.12.1.4 |
||||||
|
memDoorSensorConfigSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the door sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.12.1.5 |
||||||
|
memDoorSensorConfigAlarmGeneration
mandatory
Enable or disable alarm generation on this input.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.12.1.6 |
.1.3.6.1.4.1.318.1.1.10.4.7.14
·
1 row entry
·
8 columns
Allows for access of individual leak ropes.
The leak rope to access.
Indexes
memLeakRopeStatusModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memLeakRopeStatusModuleIndex
mandatory
The index of the leak rope entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.14.1.1 |
||||||
|
memLeakRopeStatusSensorIndex
mandatory
The index of the leak rope sensor.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.14.1.2 |
||||||
|
memLeakRopeStatusSensorName
mandatory
The user defined name of the leak rope sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.14.1.3 |
||||||
|
memLeakRopeStatusSensorLocation
mandatory
The user-defined location of the leak rope sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.14.1.4 |
||||||
|
memLeakRopeStatusSensorState
mandatory
The state of the leak rope sensor.
noleak (1) indicates there is no leak. leakdetected (2) indicates there is a detected leak. unknown (3) indicates the state is unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.14.1.5 |
||||||
|
memLeakRopeStatusSensorSeverity
mandatory
The severity of the alarm that will be triggered when
the leak rope sensor is activated. The alarms can be critical(1), warning(2) or informational(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.14.1.6 |
||||||
|
memLeakRopeAlarmStatus
mandatory
The alarm status of the rope link sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.14.1.7 |
||||||
|
memLeakRopeCommStatus
mandatory
The communication status of the rope link sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.14.1.8 |
.1.3.6.1.4.1.318.1.1.10.4.7.15
·
1 row entry
·
6 columns
Allows for the configuration of individual leak ropes.
The leak rope to configure.
Indexes
memLeakRopeConfigModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
memLeakRopeConfigModuleIndex
mandatory
The index of the leak rope module entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.15.1.1 |
||||||
|
memLeakRopeConfigSensorIndex
mandatory
The index of the leak rope sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.4.7.15.1.2 |
||||||
|
memLeakRopeConfigSensorName
mandatory
The user-defined name of the leak rope sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.15.1.3 |
||||||
|
memLeakRopeConfigSensorLocation
mandatory
The user-defined location of the leak rope sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.4.7.15.1.4 |
||||||
|
memLeakRopeConfigSensorSeverity
mandatory
The severity level of the leak rope sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.15.1.5 |
||||||
|
memLeakRopeConfigAlarmGeneration
mandatory
Enable or disable alarm generation on this input.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.4.7.15.1.6 |
.1.3.6.1.4.1.318.1.1.10.5.1.1
·
1 row entry
·
23 columns
Allows for the access of individual sensors.
A list of wireless sensor status table entries.
Indexes
wirelessSensorStatusIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
wirelessSensorStatusIndex
mandatory
The index to the sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.1 |
||||
|
wirelessSensorStatusExtAddr
mandatory
The extended address is the combination of the unique 10 byte
MAC address of the sensor concatenated with its short address. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.2 |
||||
|
wirelessSensorStatusName
mandatory
The name of the wireless sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.3 |
||||
|
wirelessSensorStatusAlarmGeneration
mandatory
Indicates whether alarm generation is enabled or disabled for the sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.4 |
||||
|
wirelessSensorStatusTemperature
mandatory
The current temperature are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.5 |
||||
|
wirelessSensorStatusHighTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.6 |
||||
|
wirelessSensorStatusLowTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.7 |
||||
|
wirelessSensorStatusHumidity
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.8 |
||||
|
wirelessSensorStatusHighHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.9 |
||||
|
wirelessSensorStatusLowHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.10 |
||||
|
wirelessSensorStatusCommStatus
mandatory
The communication status of the wireless sensor.
inactive(0) indicates sensor is in the wireless network but not sending information. active(1) indicates wireless sensor is live and sending information. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.11 |
||||
|
wirelessSensorStatusMaxTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.12 |
||||
|
wirelessSensorStatusMinTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.13 |
||||
|
wirelessSensorStatusMaxHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.14 |
||||
|
wirelessSensorStatusMinHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.15 |
||||
|
wirelessSensorStatusBattery
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.16 |
||||
|
wirelessSensorStatusLowBatteryThresh
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.17 |
||||
|
wirelessSensorStatusMinBatteryThresh
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.18 |
||||
|
wirelessSensorStatusRssi
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.19 |
||||
|
wirelessSensorStatusLowRssiThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.20 |
||||
|
wirelessSensorStatusMinRssiThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.21 |
||||
|
wirelessSensorStatusLocation
mandatory
A user-defined string identifying the location
of the wireless sensor. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.22 |
||||
|
wirelessSensorStatusAlarmStatus
mandatory
The alarm status of the wireless sensor. This integer should be interpreted
as a bit map, with each bit representing the presence or absence of the specific alarm conditions listed below. The bit will be '1' if the co… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.1.1.1.23 |
.1.3.6.1.4.1.318.1.1.10.5.2.1
·
1 row entry
·
26 columns
Allows for the access of individual pod sensors.
The sensor pod to access.
Indexes
wirelessSensorPodStatusIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
wirelessSensorPodStatusIndex
mandatory
The index to the pod sensor entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.1 |
||||
|
wirelessSensorPodPortIndex
mandatory
The pod sensor port index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.2 |
||||
|
wirelessSensorPodStatusExtAddr
mandatory
The extended address is the combination of the unique 10 byte MAC address
of the sensor concatenated with its short address. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.3 |
||||
|
wirelessSensorPodStatusName
mandatory
The name of the sensor pod.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.4 |
||||
|
wirelessSensorPodStatusAlarmGeneration
mandatory
Status of whether alarm generation is enabled or disabled.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.5 |
||||
|
wirelessSensorPodStatusTemperature
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.6 |
||||
|
wirelessSensorPodStatusHighTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.7 |
||||
|
wirelessSensorPodStatusLowTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.8 |
||||
|
wirelessSensorPodStatusHumidity
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.9 |
||||
|
wirelessSensorPodStatusHighHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.10 |
||||
|
wirelessSensorPodStatusLowHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.11 |
||||
|
wirelessSensorPodStatusCommStatus
mandatory
The communication status of the wireless sensor.
inactive(0) indicates pod sensor is in the wireless network but not sending information. active(1) indicates wireless sensor is live and sending information. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.12 |
||||
|
wirelessSensorPodStatusMaxTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.13 |
||||
|
wirelessSensorPodStatusMinTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.14 |
||||
|
wirelessSensorPodStatusMaxHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.15 |
||||
|
wirelessSensorPodStatusMinHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.16 |
||||
|
wirelessSensorPodStatusDryContactState
mandatory
State of the dry contact. If the dry contact is closed,
the drycontactClosed (1) value will be returned. If the dry contact state is open, the drycontactOpen (0) value will be returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.17 |
||||
|
wirelessSensorPodStatusDryContactNormalState
mandatory
The normal state of the dry contact. If the normal state is closed,
the normallyClosed (1) value will be returned. If the normal state is open, the normallyOpen (0) value will be returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.18 |
||||
|
wirelessSensorPodStatusBattery
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.19 |
||||
|
wirelessSensorPodStatusLowBatteryThresh
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.20 |
||||
|
wirelessSensorPodStatusMinBatteryThresh
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.21 |
||||
|
wirelessSensorPodStatusRssi
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.22 |
||||
|
wirelessSensorPodStatusLowRssiThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.23 |
||||
|
wirelessSensorPodStatusMinRssiThresh
mandatory
Values are represented in whole number percentage.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.24 |
||||
|
wirelessSensorPodStatusLocation
mandatory
The location of the wireless sensor pod.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.25 |
||||
|
wirelessSensorPodStatusAlarmStatus
mandatory
The alarm status of the wireless pod sensor. This integer should be interpreted
as a bit map, with each bit representing the presence or absence of the specific alarm conditions listed below. The bit will be '1' if th… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.26 |
.1.3.6.1.4.1.318.1.1.10.5.3.1
·
1 row entry
·
16 columns
Allows for the configuration of individual sensors.
The sensor to configure.
Indexes
wirelessSensorConfigIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
wirelessSensorConfigIndex
mandatory
The index to the entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.1 |
||||
|
wirelessSensorConfigName
mandatory
The user-defined wireless sensor ID string.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.2 |
||||
|
wirelessSensorConfigAlarmGeneration
mandatory
Enable or disable alarm generation for this sensor.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.3 |
||||
|
wirelessSensorConfigHighTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.4 |
||||
|
wirelessSensorConfigLowTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.5 |
||||
|
wirelessSensorConfigHighHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.6 |
||||
|
wirelessSensorConfigLowHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.7 |
||||
|
wirelessSensorConfigMaxTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.8 |
||||
|
wirelessSensorConfigMinTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.9 |
||||
|
wirelessSensorConfigMaxHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.10 |
||||
|
wirelessSensorConfigMinHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.11 |
||||
|
wirelessSensorConfigLowBatteryThresh
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.12 |
||||
|
wirelessSensorConfigMinBatteryThresh
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.13 |
||||
|
wirelessSensorConfigLowRssiThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.14 |
||||
|
wirelessSensorConfigMinRssiThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.15 |
||||
|
wirelessSensorConfigLocation
mandatory
A user-defined string identifying the location of the
wireless sensor. Maximum text input is 20 characters. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.3.1.1.16 |
.1.3.6.1.4.1.318.1.1.10.5.4.1
·
1 row entry
·
18 columns
Allows for the configuration of individual sensors.
The sensor to configure.
Indexes
wirelessSensorPodConfigIndex wirelessSensorPodConfigPortIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
wirelessSensorPodConfigIndex
mandatory
The index to the entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.1 |
||||
|
wirelessSensorPodConfigPortIndex
mandatory
The sensor pod port index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.2 |
||||
|
wirelessSensorPodConfigName
mandatory
The user defined name of the sensor pod.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.3 |
||||
|
wirelessSensorPodConfigAlarmGeneration
mandatory
Enable or disable alarm generation for this sensor.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.4 |
||||
|
wirelessSensorPodConfigDryContactNormalState
mandatory
The normal state of the dry contact. If the normal state is closed,
the normallyClosed (1) value will be returned. If the normal state is open, the normallyOpen (0) value will be returned. Setting this variable will cha… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.5 |
||||
|
wirelessSensorPodConfigHighTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.6 |
||||
|
wirelessSensorPodConfigLowTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.7 |
||||
|
wirelessSensorPodConfigHighHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.8 |
||||
|
wirelessSensorPodConfigLowHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.9 |
||||
|
wirelessSensorPodConfigMaxTempThresh
mandatory
Values are displayed in tenths of degrees in the scale
shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.10 |
||||
|
wirelessSensorPodConfigMinTempThresh
mandatory
Values are represented in whole number degrees.
Units are displayed in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.11 |
||||
|
wirelessSensorPodConfigMaxHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.12 |
||||
|
wirelessSensorPodConfigMinHumidityThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.13 |
||||
|
wirelessSensorPodConfigLowBatteryThresh
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.14 |
||||
|
wirelessSensorPodConfigMinBatteryThresh
mandatory
Values are displayed in tenths of Volts DC.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.15 |
||||
|
wirelessSensorPodConfigLowRssiThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.16 |
||||
|
wirelessSensorPodConfigMinRssiThresh
mandatory
Values are represented in whole number percentage.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.17 |
||||
|
wirelessSensorPodConfigLocation
mandatory
A user-defined string identifying the location of the
wireless pod sensor. Maximum text input is 20 characters. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.10.5.4.1.1.18 |
.1.3.6.1.4.1.318.1.1.12.2.1.6
·
1 row entry
·
3 columns
Allows for getting the Bank Max Load in the Rack PDU.
The Rack PDU Banks Access.
Indexes
rPDULoadDevBankIndex
| Column | Syntax | OID |
|---|---|---|
|
rPDULoadDevBankIndex
mandatory
The index to the Rack PDU bank entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.1.6.1.1 |
|
rPDULoadDevBankNumber
mandatory
Getting this OID will return the bank number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.1.6.1.2 |
|
rPDULoadDevBankMaxLoad
mandatory
Getting this OID will return the maximum rated power
that each bank of the Rack PDU can provide. It is represented in Amps. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.1.6.1.3 |
.1.3.6.1.4.1.318.1.1.12.2.1.8
·
1 row entry
·
3 columns
Allows for getting the Max Outlet Load in an Outlet Monitored Rack PDU.
This gives access to Max Outlet Load of an Outlet Monitored Rack PDU
Indexes
rPDULoadDevOutletIndex
| Column | Syntax | OID |
|---|---|---|
|
rPDULoadDevOutletIndex
mandatory
The index to the Outlet Monitored Rack PDU Max Outlet Load entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.1.8.1.1 |
|
rPDULoadDevOutletNumber
mandatory
Getting this OID will return the Outlet number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.1.8.1.2 |
|
rPDULoadDevMaxOutletLoad
mandatory
Getting this OID will return the maximum rated power
that each Outlet of an Outlet Monitored Rack PDU can provide. It is represented in Amps. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.1.8.1.3 |
.1.3.6.1.4.1.318.1.1.12.2.2.1
·
1 row entry
·
5 columns
Allows for configuration of each Rack PDU phase. The number of entries is contained in the rPDULoadDevNumPhases OID.
The Rack PDU phase to configure.
Indexes
rPDULoadPhaseConfigIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDULoadPhaseConfigIndex
mandatory
The index to the Rack PDU phase entry.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.2.2.1.1.1 |
||||||||
|
rPDULoadPhaseConfigLowLoadThreshold
mandatory
A threshold that indicates the power consumption of
the load is nearing a low consumption condition. It is represented in Amps. A warning will be issued when the load is less than the threshold value. A … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.2.1.1.2 |
||||||||
|
rPDULoadPhaseConfigNearOverloadThreshold
mandatory
A threshold that indicates the power consumption of
the load is nearing an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.2.1.1.3 |
||||||||
|
rPDULoadPhaseConfigOverloadThreshold
mandatory
A threshold that indicates the power consumption of
the load has entered an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.2.1.1.4 |
||||||||
|
rPDULoadPhaseConfigAlarm
mandatory
Getting this OID will return the current Phase Alarm.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.2.2.1.1.5 |
.1.3.6.1.4.1.318.1.1.12.2.3.1
·
1 row entry
·
5 columns
Allows for getting of status of each Rack PDU phase/bank. The number of entries is calculated by adding the number of phases (rPDULoadDevNumPhases OID) and the number of banks of outlets (rPDULoadDevNumBanks) Number of entries = #phases + #banks. NOTE: If a device has phase and bank information, all phase information shall precede the bank information. If a device has total information, it shall precede both the bank and the phase information.
The Rack PDU phase/bank to gather status from.
Indexes
rPDULoadStatusIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDULoadStatusIndex
mandatory
The index to the Rack PDU phase/bank entry. All phase information will precede
any bank information |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.3.1.1.1 |
||||||||
|
rPDULoadStatusLoad
mandatory
Getting this OID will return the phase/bank load measured
in tenths of Amps. |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.12.2.3.1.1.2 |
||||||||
|
rPDULoadStatusLoadState
mandatory
Getting this OID will return the phase/bank load state.
phaseLoadNormal(1) indicates that the phase/bank is operating properly within the rPDULoadConfigLowLoadThreshold and rPDULoadConfigNearOverloadThres… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.2.3.1.1.3 |
||||||||
|
rPDULoadStatusPhaseNumber
mandatory
The phase number to which this record refers.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.3.1.1.4 |
||||||||
|
rPDULoadStatusBankNumber
mandatory
The bank number to which this record refers. A value of 0 will be returned if
any bank is not present or if it is phase related. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.3.1.1.5 |
.1.3.6.1.4.1.318.1.1.12.2.4.1
·
1 row entry
·
5 columns
Allows for configuration of each Rack PDU bank. The number of entries is contained in the rPDULoadDevNumBanks OID.
The Rack PDU bank to configure.
Indexes
rPDULoadBankConfigIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDULoadBankConfigIndex
mandatory
The index to the Rack PDU bank entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.4.1.1.1 |
||||||||
|
rPDULoadBankConfigLowLoadThreshold
mandatory
A threshold that indicates the power consumption of
the load is nearing a low consumption condition. It is represented in Amps. A warning will be issued when the load is less than the threshold value. A … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.4.1.1.2 |
||||||||
|
rPDULoadBankConfigNearOverloadThreshold
mandatory
A threshold that indicates the power consumption of
the load is nearing an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.4.1.1.3 |
||||||||
|
rPDULoadBankConfigOverloadThreshold
mandatory
A threshold that indicates the power consumption of
the load has entered an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.2.4.1.1.4 |
||||||||
|
rPDULoadBankConfigAlarm
mandatory
Getting this OID will return the current Bank Alarm.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.2.4.1.1.5 |
.1.3.6.1.4.1.318.1.1.12.3.2.1
·
1 row entry
·
2 columns
Allows for management of outlets on a per phase basis.
The phase to manage.
Indexes
rPDUOutletPhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
rPDUOutletPhaseIndex
mandatory
The index to the Switched Rack PDU phase entry.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.3.2.1.1.1 |
||||||
|
rPDUOutletPhaseOverloadRestriction
mandatory
This OID controls the behavior of a Switched Rack PDU
phase when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will alwa… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.3.2.1.1.2 |
.1.3.6.1.4.1.318.1.1.12.3.3.1
·
1 row entry
·
5 columns
Allows for control of the individual outlets. The number of entries is contained in the rPDUOutletDevNumCntrlOutlets OID.
The outlet to control.
Indexes
rPDUOutletControlIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDUOutletControlIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.3.1.1.1 |
||||||||||||||
|
rPDUOutletControlOutletName
mandatory
The name of the outlet. The maximum string size is device dependent.
An error will be returned if the set request exceeds the max size. This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.12.3.3.1.1.2 |
||||||||||||||
|
rPDUOutletControlOutletPhase
mandatory
The phase/s associated with this outlet.
For single phase devices, this object will always return phase1(1). For 3-phase devices, this object will return phase1 (1), phase2 (2), or phase3 (… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.3.3.1.1.3 |
||||||||||||||
|
rPDUOutletControlOutletCommand
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the immediateOn (1) value will be returned. If the outlet is off, the immediateOff (2) value will be returned. Setti… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.3.3.1.1.4 |
||||||||||||||
|
rPDUOutletControlOutletBank
mandatory
The bank associated with this outlet.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.3.1.1.5 |
.1.3.6.1.4.1.318.1.1.12.3.4.1
·
1 row entry
·
7 columns
Allows for configuration of individual outlets. The number of entries is contained in the rPDUOutletDevNumCntrlOutlets OID.
The outlet to configure.
Indexes
rPDUOutletConfigIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDUOutletConfigIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.1.1.1 |
||||||||||||
|
rPDUOutletConfigOutletName
mandatory
The name of the outlet. The maximum string size is device dependent.
An error will be returned if the set request exceeds the max size. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.12.3.4.1.1.2 |
||||||||||||
|
rPDUOutletConfigOutletPhase
mandatory
The phase/s associated with this outlet.
For single phase devices, this object will always return phase1(1). For 3-phase devices, this object will return phase1 (1), phase2 (2), or phase3 (… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.3.4.1.1.3 |
||||||||||||
|
rPDUOutletConfigPowerOnTime
mandatory
The amount of time (in seconds) the outlet will delay
powering on at coldstart or when a command that requires a turn-on delay is issued. Allowed values are: -1 - never power on. 0 … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.1.1.4 |
||||||||||||
|
rPDUOutletConfigPowerOffTime
mandatory
The amount of time (in seconds) the outlet will delay
powering off when a command that requires a turn-off delay is issued. Allowed values are: -1 - never power off. 0 - powe… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.1.1.5 |
||||||||||||
|
rPDUOutletConfigRebootDuration
mandatory
During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait, in seconds, after turning the power off, at the start of the sequence, before turning power back on, at the en… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.1.1.6 |
||||||||||||
|
rPDUOutletConfigOutletBank
mandatory
The bank associated with this outlet.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.1.1.7 |
.1.3.6.1.4.1.318.1.1.12.3.4.3
·
1 row entry
·
6 columns
Allows for getting/setting of outlet thresholds of an Outlet Monitored Rack PDU.
This gives access to Monitored Outlet entries
Indexes
rPDUOutletConfigMonitoredIndex
| Column | Syntax | OID |
|---|---|---|
|
rPDUOutletConfigMonitoredIndex
mandatory
The index to the RACK PDU Phase entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.3.1.1 |
|
rPDUOutletConfigMonitoredName
mandatory
The name of the Monitored Outlet. The maximum string size is device dependent.
An error will be returned if the set request exceeds the max size. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.12.3.4.3.1.2 |
|
rPDUOutletConfigMonitoredNumber
mandatory
The outlet number of an Outlet Monitored RACK PDU.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.3.1.3 |
|
rPDUOutletConfigMonitoredLowLoadThreshold
mandatory
A threshold that indicates the power consumption of
the load is nearing a low consumption condition. It is represented in Amps. A warning will be issued when the load is less than the threshold value. A … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.3.1.4 |
|
rPDUOutletConfigMonitoredNearOverloadThreshold
mandatory
A threshold that indicates the power consumption of
the load is nearing an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.3.1.5 |
|
rPDUOutletConfigMonitoredOverloadThreshold
mandatory
A threshold that indicates the power consumption of
the load has entered an overload condition. It is represented in Amps. A warning will be issued when the load is greater than or equal to the threshold value. … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.4.3.1.6 |
.1.3.6.1.4.1.318.1.1.12.3.5.1
·
1 row entry
·
7 columns
Allows for getting of status of individual outlets. The number of entries is contained in the rPDUOutletDevNumCntrlOutlets OID or rPDUOutletDevMonitoredOutlets OID.
The outlet to gather status from.
Indexes
rPDUOutletStatusIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDUOutletStatusIndex
mandatory
The index to the outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.5.1.1.1 |
||||||||||||
|
rPDUOutletStatusOutletName
mandatory
The name of the outlet. The maximum string size is device dependent.
This OID is provided for informational purposes only. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.12.3.5.1.1.2 |
||||||||||||
|
rPDUOutletStatusOutletPhase
mandatory
The phase/s associated with this outlet.
For single phase devices, this object will always return phase1(1). For 3-phase devices, this object will return phase1 (1), phase2 (2), or phase3 (… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.3.5.1.1.3 |
||||||||||||
|
rPDUOutletStatusOutletState
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the outletStatusOn (1) value will be returned. If the outlet is off, the outletStatusOff (2) value will be returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.3.5.1.1.4 |
||||||||||||
|
rPDUOutletStatusCommandPending
mandatory
Getting this variable will return the command pending
state of the outlet. If a command is pending on the outlet, the outletStatusCommandPending (1) value will be returned. If there is not a command pending on the outle… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.3.5.1.1.5 |
||||||||||||
|
rPDUOutletStatusOutletBank
mandatory
The bank associated with this outlet.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.5.1.1.6 |
||||||||||||
|
rPDUOutletStatusLoad
mandatory
Getting this OID will return the measured Outlet load for
an Outlet Monitored Rack PDU in tenths of Amps. For other models this OID is not supported. |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.12.3.5.1.1.7 |
.1.3.6.1.4.1.318.1.1.12.3.6.1
·
1 row entry
·
2 columns
Allows for management of outlets on a per bank basis.
The bank to manage.
Indexes
rPDUOutletBankIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
rPDUOutletBankIndex
mandatory
The index to the Switched Rack PDU bank entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.3.6.1.1.1 |
||||||
|
rPDUOutletBankOverloadRestriction
mandatory
This OID controls the behavior of a Switched Rack PDU
bank when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will alway… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.3.6.1.1.2 |
.1.3.6.1.4.1.318.1.1.12.5.2
·
1 row entry
·
3 columns
Allows for getting of status of each Rack PDU Bank
This gives access to Bank entries
Indexes
rPDUStatusBankIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDUStatusBankIndex
mandatory
The index to the RACK PDU Bank entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.5.2.1.1 |
||||||||
|
rPDUStatusBankNumber
mandatory
Getting this OID will return the bank number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.5.2.1.2 |
||||||||
|
rPDUStatusBankState
mandatory
Getting this OID will return the bank load state.
bankLoadNormal(1) indicates that the bank is operating properly within the rPDULoadBankConfigLowLoadThreshold and rPDULoadBankConfigNearOverloadThreshold … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.5.2.1.3 |
.1.3.6.1.4.1.318.1.1.12.5.4
·
1 row entry
·
3 columns
Allows for getting of status of each Rack PDU Phase
This gives access to Phase entries
Indexes
rPDUStatusPhaseIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDUStatusPhaseIndex
mandatory
The index to the RACK PDU Phase entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.5.4.1.1 |
||||||||
|
rPDUStatusPhaseNumber
mandatory
Getting this OID will return the phase number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.5.4.1.2 |
||||||||
|
rPDUStatusPhaseState
mandatory
Getting this OID will return the Phase load state.
phaseLoadNormal(1) indicates that the Phase is operating properly within the rPDULoadPhaseConfigLowLoadThreshold and rPDULoadPhaseConfigNearOverloadThres… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.5.4.1.3 |
.1.3.6.1.4.1.318.1.1.12.5.6
·
1 row entry
·
3 columns
Allows for getting of status of each Outlet of an Outlet Monitored Rack PDU.
This gives access to Outlet entries
Indexes
rPDUStatusOutletIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDUStatusOutletIndex
mandatory
The index to the RACK PDU Outlet entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.5.6.1.1 |
||||||||
|
rPDUStatusOutletNumber
mandatory
Getting this OID will return the Outlet number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.12.5.6.1.2 |
||||||||
|
rPDUStatusOutletState
mandatory
Getting this OID will return the Outlet load state.
outletLoadNormal(1) indicates that the Outlet is operating properly within the rPDUOutletConfigMonitoredLowLoadThreshold and rPDUOutletConfigMonitoredNe… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.12.5.6.1.3 |
.1.3.6.1.4.1.318.1.1.13.1.1.3
·
1 row entry
·
6 columns
Allows for getting identification information from each module in the system.
The module to get information from.
Indexes
airFMIdentModuleIndex
| Column | Syntax | OID |
|---|---|---|
|
airFMIdentModuleIndex
mandatory
The index of the module information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.1.3.1.1 |
|
airFMIdentModuleModelNumber
mandatory
A character string identifying the
model number. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.1.3.1.2 |
|
airFMIdentModuleDateOfMfg
mandatory
A character string identifying the
manufacture date. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.1.3.1.3 |
|
airFMIdentModuleSerialNumber
mandatory
A character string identifying the
unit serial number. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.1.3.1.4 |
|
airFMIdentModuleFirmwareRev
mandatory
A character string identifying the
firmware revision. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.1.3.1.5 |
|
airFMIdentModuleHardwareRev
mandatory
A character string identifying the
hardware revision. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.1.3.1.6 |
.1.3.6.1.4.1.318.1.1.13.1.2.20
·
1 row entry
·
8 columns
Allows for getting information from each module in the system.
The module to get status from.
Indexes
airFMStatusModuleIndex
| Column | Syntax | OID |
|---|---|---|
|
airFMStatusModuleIndex
mandatory
The index of the module information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.2.20.1.1 |
|
airFMStatusModuleOutputCapacity
mandatory
The module output capacity in kilowatts.
This OID has been deprecated in favor of airFMModOutputCapacity. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.2.20.1.2 |
|
airFMStatusModuleSupplyTempC
mandatory
The module supply air temperature in
tenths of degrees Celsius. This OID has been deprecated in favor of airFMModSupplyTempC. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.2.20.1.3 |
|
airFMStatusModuleSupplyTempF
mandatory
The module supply air temperature in
tenths of degrees Fahrenheit. This OID has been deprecated in favor of airFMModSupplyTempF. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.2.20.1.4 |
|
airFMStatusModuleSupplyHum
mandatory
The module supply air humidity in tenths of percent RH.
This OID has been deprecated in favor of airFMModSupplyHum. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.2.20.1.5 |
|
airFMStatusModuleReturnTempC
mandatory
The module return air temperature in
tenths of degrees Celsius. This OID has been deprecated in favor of airFMModReturnTempC. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.2.20.1.6 |
|
airFMStatusModuleReturnTempF
mandatory
The module return air temperature in
tenths of degrees Fahrenheit. This OID has been deprecated in favor of airFMModReturnTempF. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.2.20.1.7 |
|
airFMStatusModuleReturnHum
mandatory
The module return air humidity in tenths of percent RH.
This OID has been deprecated in favor of airFMModReturnHum. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.2.20.1.8 |
.1.3.6.1.4.1.318.1.1.13.1.3.4.2
·
1 row entry
·
7 columns
Allows for getting information from each system in the group.
The system to get status from.
Indexes
airFMGroupSysIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
airFMGroupSysIndex
mandatory
The index of the system information.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.3.4.2.1.1 |
||||||||||||||
|
airFMGroupSysRoleStatus
mandatory
The present mode of the System.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.3.4.2.1.2 |
||||||||||||||
|
airFMGroupSysPresentRole
mandatory
The present role of the System in a Group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.3.4.2.1.3 |
||||||||||||||
|
airFMGroupSysManualRoleSetting
mandatory
The manual role setting of the System in a Group.
Only applies if Role Assignment Method is set to static (Manually Assigned Roles). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.3.4.2.1.4 |
||||||||||||||
|
airFMGroupSysRunHours
mandatory
The total number of hours the System has been
contributing to environmental control. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.3.4.2.1.5 |
||||||||||||||
|
airFMGroupSysComm
mandatory
Indicates whether a system is communicating with the
other Systems in the Group. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.3.4.2.1.6 |
||||||||||||||
|
airFMGroupSysIPAddress
mandatory
The IP Address of the System.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.1.1.13.1.3.4.2.1.7 |
.1.3.6.1.4.1.318.1.1.13.1.4.10.2
·
1 row entry
·
6 columns
Allows for getting information from each input contact.
The input contact to obtain status from.
Indexes
airFMSysInputIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
airFMSysInputIndex
mandatory
The number designator of the Input Contact.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.4.10.2.1.1 |
||||||||||||
|
airFMSysInputName
mandatory
The configurable name for the Input Contact. Maximum
text input is 13 characters. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.4.10.2.1.2 |
||||||||||||
|
airFMSysInputStatus
mandatory
The state of this contact: Open or Closed. A
violation will occur when this relay is not in its normal state. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.10.2.1.3 |
||||||||||||
|
airFMSysInputNormalState
mandatory
Set the normal state of this contact (the state when
no alarm/event exists). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.10.2.1.4 |
||||||||||||
|
airFMSysInputDelay
mandatory
Set the delay between this contact exiting its normal
state and an alarm being triggered. Measured in seconds. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.4.10.2.1.5 |
||||||||||||
|
airFMSysInputAlarmAction
mandatory
Sets the behavior for this contact when it exits its
normal state. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.10.2.1.6 |
.1.3.6.1.4.1.318.1.1.13.1.4.11.2
·
1 row entry
·
3 columns
Allows for getting information from each output relay.
The output relay to obtain status from.
Indexes
airFMSysOutputIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
airFMSysOutputIndex
mandatory
The number designator of the output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.4.11.2.1.1 |
||||
|
airFMSysOutputStatus
mandatory
The state of this relay: Open or Closed. A violation
will occur when this relay is not in its normal state. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.11.2.1.2 |
||||
|
airFMSysOutputNormalState
mandatory
Set the normal state of this relay (the state when no
alarm/event exists). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.11.2.1.3 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2
·
1 row entry
·
17 columns
Allows for getting alarm map information.
The system alarm map type to reference.
Indexes
airFMSysAlarmMapSysOutputIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airFMSysAlarmMapSysOutputIndex
mandatory
The index of the output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.1 |
||||||
|
airFMSysAlarmMapSysAnyAlarm
mandatory
System alarm map setting for Any Alarm.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.2 |
||||||
|
airFMSysAlarmMapSystemOn
mandatory
System alarm map setting for System On.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.3 |
||||||
|
airFMSysAlarmMapSystemOffline
mandatory
System alarm map setting for System Offline.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.4 |
||||||
|
airFMSysAlarmMapSysHighEnvTemp
mandatory
System alarm map setting for High Environmental
Temperature. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.5 |
||||||
|
airFMSysAlarmMapSysLowEnvTemp
mandatory
System alarm map setting for Low Environmental
Temperature. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.6 |
||||||
|
airFMSysAlarmMapSysHighEnvHum
mandatory
System alarm map setting for High Environmental
Humidity. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.7 |
||||||
|
airFMSysAlarmMapSysLowEnvHum
mandatory
System alarm map setting for Low Environmental
Humidity. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.8 |
||||||
|
airFMSysAlarmMapSysFireDet
mandatory
System alarm map setting for Fire Detected.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.9 |
||||||
|
airFMSysAlarmMapSysSmokeDet
mandatory
System alarm map setting for Smoke Detected.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.10 |
||||||
|
airFMSysAlarmMapSysEconIsol
mandatory
System alarm map setting for Econ Isolator.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.11 |
||||||
|
airFMSysAlarmMapSysSupplySensFail
mandatory
System alarm map setting for Supply Sensor Failure.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.12 |
||||||
|
airFMSysAlarmMapSysReturnSensFail
mandatory
System alarm map setting for Return Sensor Failure.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.13 |
||||||
|
airFMSysAlarmMapSysRemSensRemoved
mandatory
System alarm map setting for Remote Sensor Removed.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.14 |
||||||
|
airFMSysAlarmMapSysPrimSensFail
mandatory
System alarm map setting for Primary Sensor Failure.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.15 |
||||||
|
airFMSysAlarmMapSysSecSensFail
mandatory
System alarm map setting for Secondary Sensor Failure.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.16 |
||||||
|
airFMSysAlarmMapSysSecSensActive
mandatory
System alarm map setting for Secondary Sensor Active.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.1.2.1.17 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2
·
1 row entry
·
15 columns
Allows for getting alarm map information.
The main module alarm map type to reference.
Indexes
airFMSysAlarmMapMainModOutputIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airFMSysAlarmMapMainModOutputIndex
mandatory
The index of the output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.1 |
||||||
|
airFMSysAlarmMapMainModAnyAlarm
mandatory
Main Module alarm map setting for Any Alarm.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.2 |
||||||
|
airFMSysAlarmMapMainModMaintReq
mandatory
Main Module alarm map setting for Module Maintenance
Required. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.3 |
||||||
|
airFMSysAlarmMapMainModCoolFail
mandatory
Main Module alarm map setting for Module Cooling
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.4 |
||||||
|
airFMSysAlarmMapMainModHighSupplyTemp
mandatory
Main Module alarm map setting for High Supply
Temperature. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.5 |
||||||
|
airFMSysAlarmMapMainModLowSupplyTemp
mandatory
Main Module alarm map setting for Low Supply
Temperature. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.6 |
||||||
|
airFMSysAlarmMapMainModHumFail
mandatory
Main Module alarm map setting for Humidifier Failure.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.7 |
||||||
|
airFMSysAlarmMapMainModHumReplCyl
mandatory
Main Module alarm map setting for Humidifier Replace
Cylinder. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.8 |
||||||
|
airFMSysAlarmMapMainModCondPumpFail
mandatory
Main Module alarm map setting for Condensate Pump
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.9 |
||||||
|
airFMSysAlarmMapMainModBlwrCntl1Fail
mandatory
Main Module alarm map setting for Blower Controller 1
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.10 |
||||||
|
airFMSysAlarmMapMainModBlwrCntl2Fail
mandatory
Main Module alarm map setting for Blower Controller 2
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.11 |
||||||
|
airFMSysAlarmMapMainModHighFltrDP
mandatory
Main Module alarm map setting for High Filter
Differential Pressure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.12 |
||||||
|
airFMSysAlarmMapMainModLowAirFlow
mandatory
Main Module alarm map setting for Low Air Flow.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.13 |
||||||
|
airFMSysAlarmMapMainModAirBlckIntOpen
mandatory
Main Module alarm map setting for Air Block Interlock
Open. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.14 |
||||||
|
airFMSysAlarmMapMainModWaterDetected
mandatory
Main Module alarm map setting for Water Detected.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.2.2.1.15 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2
·
1 row entry
·
15 columns
Allows for getting alarm map information.
The expansion module 1 alarm map type to reference.
Indexes
airFMSysAlarmMapExpMod1OutputIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airFMSysAlarmMapExpMod1OutputIndex
mandatory
The index of the output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.1 |
||||||
|
airFMSysAlarmMapExpMod1AnyAlarm
mandatory
Exp Module 1 alarm map setting for Any Alarm.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.2 |
||||||
|
airFMSysAlarmMapExpMod1MaintReq
mandatory
Exp Module 1 alarm map setting for Module Maintenance
Required. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.3 |
||||||
|
airFMSysAlarmMapExpMod1CoolFail
mandatory
Exp Module 1 alarm map setting for Module Cooling
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.4 |
||||||
|
airFMSysAlarmMapExpMod1HighSupplyTemp
mandatory
Exp Module 1 alarm map setting for High Supply
Temperature. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.5 |
||||||
|
airFMSysAlarmMapExpMod1LowSupplyTemp
mandatory
Exp Module 1 alarm map setting for Low Supply
Temperature. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.6 |
||||||
|
airFMSysAlarmMapExpMod1HumFail
mandatory
Exp Module 1 alarm map setting for Humidifier Failure.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.7 |
||||||
|
airFMSysAlarmMapExpMod1HumReplCyl
mandatory
Exp Module 1 alarm map setting for Humidifier Replace
Cylinder. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.8 |
||||||
|
airFMSysAlarmMapExpMod1CondPumpFail
mandatory
Exp Module 1 alarm map setting for Condensate Pump
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.9 |
||||||
|
airFMSysAlarmMapExpMod1BlwrCntl1Fail
mandatory
Exp Module 1 alarm map setting for Blower Controller 1
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.10 |
||||||
|
airFMSysAlarmMapExpMod1BlwrCntl2Fail
mandatory
Exp Module 1 alarm map setting for Blower Controller 2
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.11 |
||||||
|
airFMSysAlarmMapExpMod1HighFltrDP
mandatory
Exp Module 1 alarm map setting for High Filter
Differential Pressure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.12 |
||||||
|
airFMSysAlarmMapExpMod1LowAirFlow
mandatory
Exp Module 1 alarm map setting for Low Air Flow.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.13 |
||||||
|
airFMSysAlarmMapExpMod1AirBlckIntOpen
mandatory
Exp Module 1 alarm map setting for Air Block Interlock
Open. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.14 |
||||||
|
airFMSysAlarmMapExpMod1WaterDetected
mandatory
Exp Module 1 alarm map setting for Water Detected.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.3.2.1.15 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2
·
1 row entry
·
15 columns
Allows for getting alarm map information.
The expansion module 2 alarm map type to reference.
Indexes
airFMSysAlarmMapExpMod2OutputIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airFMSysAlarmMapExpMod2OutputIndex
mandatory
The index of the output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.1 |
||||||
|
airFMSysAlarmMapExpMod2AnyAlarm
mandatory
Exp Module 2 alarm map setting for Any Alarm.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.2 |
||||||
|
airFMSysAlarmMapExpMod2MaintReq
mandatory
Exp Module 2 alarm map setting for Module Maintenance
Required. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.3 |
||||||
|
airFMSysAlarmMapExpMod2CoolFail
mandatory
Exp Module 2 alarm map setting for Module Cooling
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.4 |
||||||
|
airFMSysAlarmMapExpMod2HighSupplyTemp
mandatory
Exp Module 2 alarm map setting for High Supply
Temperature. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.5 |
||||||
|
airFMSysAlarmMapExpMod2LowSupplyTemp
mandatory
Exp Module 2 alarm map setting for Low Supply
Temperature. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.6 |
||||||
|
airFMSysAlarmMapExpMod2HumFail
mandatory
Exp Module 2 alarm map setting for Humidifier Failure.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.7 |
||||||
|
airFMSysAlarmMapExpMod2HumReplCyl
mandatory
Exp Module 2 alarm map setting for Humidifier Replace
Cylinder. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.8 |
||||||
|
airFMSysAlarmMapExpMod2CondPumpFail
mandatory
Exp Module 2 alarm map setting for Condensate Pump
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.9 |
||||||
|
airFMSysAlarmMapExpMod2BlwrCntl1Fail
mandatory
Exp Module 2 alarm map setting for Blower Controller 1
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.10 |
||||||
|
airFMSysAlarmMapExpMod2BlwrCntl2Fail
mandatory
Exp Module 2 alarm map setting for Blower Controller 2
Failure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.11 |
||||||
|
airFMSysAlarmMapExpMod2HighFltrDP
mandatory
Exp Module 2 alarm map setting for High Filter
Differential Pressure. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.12 |
||||||
|
airFMSysAlarmMapExpMod2LowAirFlow
mandatory
Exp Module 2 alarm map setting for Low Air Flow.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.13 |
||||||
|
airFMSysAlarmMapExpMod2AirBlckIntOpen
mandatory
Exp Module 2 alarm map setting for Air Block Interlock
Open. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.14 |
||||||
|
airFMSysAlarmMapExpMod2WaterDetected
mandatory
Exp Module 2 alarm map setting for Water Detected.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.4.2.1.15 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2
·
1 row entry
·
17 columns
Allows for getting alarm map information.
The input contact alarm map type to reference.
Indexes
airFMSysAlarmMapInputOutputIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airFMSysAlarmMapInputOutputIndex
mandatory
The index of the output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.1 |
||||||
|
airFMSysAlarmMapInput1
mandatory
Input contact 1 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.2 |
||||||
|
airFMSysAlarmMapInput2
mandatory
Input contact 2 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.3 |
||||||
|
airFMSysAlarmMapInput3
mandatory
Input contact 3 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.4 |
||||||
|
airFMSysAlarmMapInput4
mandatory
Input contact 4 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.5 |
||||||
|
airFMSysAlarmMapInput5
mandatory
Input contact 5 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.6 |
||||||
|
airFMSysAlarmMapInput6
mandatory
Input contact 6 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.7 |
||||||
|
airFMSysAlarmMapInput7
mandatory
Input contact 7 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.8 |
||||||
|
airFMSysAlarmMapInput8
mandatory
Input contact 8 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.9 |
||||||
|
airFMSysAlarmMapInput9
mandatory
Input contact 9 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.10 |
||||||
|
airFMSysAlarmMapInput10
mandatory
Input contact 10 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.11 |
||||||
|
airFMSysAlarmMapInput11
mandatory
Input contact 11 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.12 |
||||||
|
airFMSysAlarmMapInput12
mandatory
Input contact 12 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.13 |
||||||
|
airFMSysAlarmMapInput13
mandatory
Input contact 13 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.14 |
||||||
|
airFMSysAlarmMapInput14
mandatory
Input contact 14 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.15 |
||||||
|
airFMSysAlarmMapInput15
mandatory
Input contact 15 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.16 |
||||||
|
airFMSysAlarmMapInput16
mandatory
Input contact 16 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.5.2.1.17 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2
·
1 row entry
·
17 columns
Allows for getting alarm map information.
The input contact alarm map type to reference.
Indexes
airFMSysAlarmMapOutputIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airFMSysAlarmMapOutputIndex
mandatory
The index of the output relay.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.1 |
||||||
|
airFMSysAlarmMapOutput1
mandatory
Output relay 1 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.2 |
||||||
|
airFMSysAlarmMapOutput2
mandatory
Output relay 2 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.3 |
||||||
|
airFMSysAlarmMapOutput3
mandatory
Output relay 3 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.4 |
||||||
|
airFMSysAlarmMapOutput4
mandatory
Output relay 4 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.5 |
||||||
|
airFMSysAlarmMapOutput5
mandatory
Output relay 5 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.6 |
||||||
|
airFMSysAlarmMapOutput6
mandatory
Output relay 6 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.7 |
||||||
|
airFMSysAlarmMapOutput7
mandatory
Output relay 7 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.8 |
||||||
|
airFMSysAlarmMapOutput8
mandatory
Output relay 8 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.9 |
||||||
|
airFMSysAlarmMapOutput9
mandatory
Output relay 9 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.10 |
||||||
|
airFMSysAlarmMapOutput10
mandatory
Output relay 10 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.11 |
||||||
|
airFMSysAlarmMapOutput11
mandatory
Output relay 11 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.12 |
||||||
|
airFMSysAlarmMapOutput12
mandatory
Output relay 12 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.13 |
||||||
|
airFMSysAlarmMapOutput13
mandatory
Output relay 13 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.14 |
||||||
|
airFMSysAlarmMapOutput14
mandatory
Output relay 14 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.15 |
||||||
|
airFMSysAlarmMapOutput15
mandatory
Output relay 15 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.16 |
||||||
|
airFMSysAlarmMapOutput16
mandatory
Output relay 16 alarm map setting.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.4.12.6.2.1.17 |
.1.3.6.1.4.1.318.1.1.13.1.5.1.2
·
1 row entry
·
6 columns
Allows for getting information from each module in the system.
The module to get information from.
Indexes
airFMModIdentModuleIndex
| Column | Syntax | OID |
|---|---|---|
|
airFMModIdentModuleIndex
mandatory
The index of the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.1.2.1.1 |
|
airFMModModelNumber
mandatory
Model number of the Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.5.1.2.1.2 |
|
airFMModSerialNumber
mandatory
Unique identification number for this Module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.5.1.2.1.3 |
|
airFMModManufactureDate
mandatory
Date the Module was manufactured.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.5.1.2.1.4 |
|
airFMModFirmwareRev
mandatory
Revision number of the firmware installed on this
Module. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.5.1.2.1.5 |
|
airFMModHardwareRev
mandatory
Revision number of the hardware installed on this
Module. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.5.1.2.1.6 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2
·
1 row entry
·
11 columns
Allows for getting information from each module in the system.
The module to get information from.
Indexes
airFMModStatusModuleIndex
| Column | Syntax | OID |
|---|---|---|
|
airFMModStatusModuleIndex
mandatory
The index of the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.1 |
|
airFMModSupplyTempC
mandatory
The temperature measured at the supply sensor.
Measured in tenths of degrees Celsius. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.2 |
|
airFMModSupplyTempF
mandatory
The temperature measured at the supply sensor.
Measured in tenths of degrees Fahrenheit. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.3 |
|
airFMModSupplyHum
mandatory
The humidity measured at the supply sensor.
Measured in tenths of percent relative humidity. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.4 |
|
airFMModReturnTempC
mandatory
The temperature measured at the return sensor.
Measured in tenths of degrees Celsius. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.5 |
|
airFMModReturnTempF
mandatory
The temperature measured at the return sensor.
Measured in tenths of degrees Fahrenheit. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.6 |
|
airFMModReturnHum
mandatory
The humidity measured at the return sensor.
Measured in tenths of percent relative humidity. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.7 |
|
airFMModFilterDiffPresPa
mandatory
The difference in pressure on either side of the air
filters. A high differential pressure indicates a clogged filter. Measured in Pascals. A value of -2147483648 indicates that this OID does not apply to this device d… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.8 |
|
airFMModFilterDiffPresInWC
mandatory
The difference in pressure on either side of the air
filters. A high differential pressure indicates a clogged filter. Measured in hundredths of inches water column. A value of -2147483648 indicates that this OID does … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.9 |
|
airFMModCoilDiffPresPa
mandatory
The difference in pressure on either side of the
cooling/dehumidification coils. Measured in Pascals. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.10 |
|
airFMModCoilDiffPresInWC
mandatory
The difference in pressure on either side of the
cooling/dehumidification coils. Measured in hundredths of inches water column. A value of -2147483648 indicates that this OID does not apply to this device due to its co… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.2.2.1.11 |
.1.3.6.1.4.1.318.1.1.13.1.5.3.2
·
1 row entry
·
13 columns
Allows for getting information from each module in the system.
The module to get information from.
Indexes
airFMModPropModuleIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
airFMModPropModuleIndex
mandatory
The index of the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.1 |
||||||||||||||||
|
airFMModOutputCapacity
mandatory
The cooling capacity (in Kilowatts) of the displayed
Module. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.2 |
||||||||||||||||
|
airFMModCapacityCtrl
mandatory
The method used to load and unload the compressors.
Tandem compressor Modules use two stages (one compressor each). Single compressor Modules use hot gas bypass. A value of notApplicable indicates that this OID does not… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.3 |
||||||||||||||||
|
airFMModHeaterType
mandatory
The type of reheating device installed in this Module.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.4 |
||||||||||||||||
|
airFMModElectricHeaterType
mandatory
The type/capacity of the electric heater, if installed.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.5 |
||||||||||||||||
|
airFMModHumidifierType
mandatory
The type of equipment installed in the Module to run
the humidification mode. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.6 |
||||||||||||||||
|
airFMModBlwrFreqSetting
mandatory
Frequency of the blower in tenths of hertz.
A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.7 |
||||||||||||||||
|
airFMModNomCoilDiffPresPa
mandatory
The difference in pressure on either side of the
cooling/dehumidification coils. Measured in Pascals. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.8 |
||||||||||||||||
|
airFMModNomCoilDiffPresInWC
mandatory
The difference in pressure on either side of the
cooling/dehumidification coils. Measured in hundredths of inches water column. A value of -2147483648 indicates that this OID does not apply to this device due to its co… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.9 |
||||||||||||||||
|
airFMModCondPump
mandatory
Indicates the presence of a condensate pump in the
Modules of this System. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.10 |
||||||||||||||||
|
airFMModFireDetector
mandatory
Indicates the presence of a fire detector for each
of the Modules in this System. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.11 |
||||||||||||||||
|
airFMModSmokeDetector
mandatory
Indicates the presence of a smoke detector for each
of the Modules in this System. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.12 |
||||||||||||||||
|
airFMModWaterDetector
mandatory
Indicates the presence of a water leak detector for
each of the Modules in this System. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.3.2.1.13 |
.1.3.6.1.4.1.318.1.1.13.1.5.4.2
·
1 row entry
·
9 columns
Allows for getting information from each module in the system.
The module to get information from.
Indexes
airFMModCoolModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airFMModCoolModuleIndex
mandatory
The index of the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.4.2.1.1 |
||||||
|
airFMModComp1
mandatory
The status of compressor 1 of the tandem compressor
unit (on or off). A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.4.2.1.2 |
||||||
|
airFMModComp2
mandatory
The status of compressor 2 of the tandem compressor
unit (on or off). A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.4.2.1.3 |
||||||
|
airFMModSuctPresKPa
mandatory
The refrigerant pressure measured at the suction
inlet of the compressor. Measured in kiloPascals. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.4.2.1.4 |
||||||
|
airFMModSuctPresPSI
mandatory
The refrigerant pressure measured at the suction
inlet of the compressor. Measured in pounds per square inch. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.4.2.1.5 |
||||||
|
airFMModDischPresKPa
mandatory
The refrigerant pressure measured at the discharge
outlet of the compressor. Measured in kiloPascals. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.4.2.1.6 |
||||||
|
airFMModDischPresPSI
mandatory
The refrigerant pressure measured at the discharge
outlet of the compressor. Measured in pounds per square inch. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.4.2.1.7 |
||||||
|
airFMModCondFluidVlvPos
mandatory
The position of the condenser fluid valve. The valve
regulates the flow of liquid coolant into the heat exchanger (condenser). 100% indicates the valve is completely open, and 0% indicates that the valve is closed. Mea… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.4.2.1.8 |
||||||
|
airFMModCoilFluidVlvPos
mandatory
The position of the coil fluid valve. The valve
regulates the flow of liquid coolant in the fluid cooling coil (MultiCool, Economizer, or Chilled Water). 100% indicates the valve is completely open, and 0% indicates tha… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.4.2.1.9 |
.1.3.6.1.4.1.318.1.1.13.1.5.5.2
·
1 row entry
·
7 columns
Allows for getting information from each module in the system.
The module to get information from.
Indexes
airFMModHumModuleIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
airFMModHumModuleIndex
mandatory
The index of the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.5.2.1.1 |
||||||||
|
airFMModHumidifier
mandatory
The type of equipment installed in the Module to run
the humidification mode. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.5.2.1.2 |
||||||||
|
airFMModElectrodeCurrent
mandatory
The current drawn by the electrodes of the steam
cylinder humidifier. Measured in tenths of amps. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.5.2.1.3 |
||||||||
|
airFMModHumActualOutput
mandatory
The humidification output of an individual Module.
Measured in percent. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.5.2.1.4 |
||||||||
|
airFMModWaterConductivity
mandatory
The conductivity of the water in the humidifier
cylinder. Measured in microSiemens per centimeter. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.5.2.1.5 |
||||||||
|
airFMModHotWaterVlvPos
mandatory
The position of the hot water valve. 100% indicates
the valve is completely open, and 0% indicates that the valve is closed. Measured in percent. A value of -2147483648 indicates that this OID does not apply to this de… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.5.2.1.6 |
||||||||
|
airFMModStmElectHumMode
mandatory
Set the humidifier function mode.
Off: Remove power from electrodes. Auto: Humidifier controlled by Module controller. Drain: Remove power from electrodes and drain the cylinder. A value of notApplicable … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.5.2.1.7 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2
·
1 row entry
·
25 columns
Allows for getting information from each module in the system.
The module to get information from.
Indexes
airFMModBlwr1ModuleIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
airFMModBlwr1ModuleIndex
mandatory
The index of the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.1 |
||||||||
|
airFMModBlwr1CtrlType
mandatory
The type of blower controller.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.2 |
||||||||
|
airFMModBlwr1CmdFreq
mandatory
The requested operating frequency for the blower.
Measured in tenths of hertz. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.3 |
||||||||
|
airFMModBlwr1ActFreq
mandatory
The frequency at which the blower controller is
operating. Measured in tenths of hertz. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.4 |
||||||||
|
airFMModBlwr1Poles
mandatory
The number of poles of the blower motor that the
blower controller is controlling. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.5 |
||||||||
|
airFMModBlwr1RatedHorsePower
mandatory
The power rating of the blower motor. Measured in
hundredths of horsepower. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.6 |
||||||||
|
airFMModBlwr1RatedCurrent
mandatory
The current rating of the blower motor. Measured in
hundredths of amps. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.7 |
||||||||
|
airFMModBlwr1ActTorq
mandatory
The actual torque of the blower motor. Measured in
hundredths of percent. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.8 |
||||||||
|
airFMModBlwr1Current
mandatory
The percent of rated current drawn by the blower
motor. Measured in hundredths of percent. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.9 |
||||||||
|
airFMModBlwr1Vlt
mandatory
The voltage supplied to the blower motor. Measured
in tenths of volts RMS. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.10 |
||||||||
|
airFMModBlwr1DCLinkVlt
mandatory
The voltage of the blower controller's DC bus.
Measured in volts DC. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.11 |
||||||||
|
airFMModBlwr1AccTime
mandatory
The time to accelerate the blower to the specified
frequency. Measured in tenths of seconds. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.12 |
||||||||
|
airFMModBlwr1DecTime
mandatory
The time to decelerate the blower frequency to zero.
Measured in tenths of seconds. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.13 |
||||||||
|
airFMModBlwr1CapLife
mandatory
The remaining life of the main circuit capacitor.
Measured in tenths of percent. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.14 |
||||||||
|
airFMModBlwr1CtrlCoolFanLife
mandatory
The total operation time of the blower controller
cooling fan. Measured in hours. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.15 |
||||||||
|
airFMModBlwr1ElOvMode
mandatory
Enables or disables the electronic overload relay.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.16 |
||||||||
|
airFMModBlwr1ElOvSetting
mandatory
The electronic overload relay is activated when the
current exceeds this threshold. Measured in hundredths of amps. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.17 |
||||||||
|
airFMModBlwr1ElOvTimeConst
mandatory
The delay between the current exceeding the overload
threshold and the activation of the electronic overload relay. Measured in tenths of minutes. A value of -2147483648 indicates that this OID does not apply to this d… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.18 |
||||||||
|
airFMModBlwr1FanPower
mandatory
The actual power of the blower motor. Measured in
tenths of percent. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.19 |
||||||||
|
airFMModBlwr1HeatsinkTempC
mandatory
The temperature of the heatsink on the blower
controller. Measured in degrees Celsius. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.20 |
||||||||
|
airFMModBlwr1HeatsinkTempF
mandatory
The temperature of the heatsink on the blower
controller. Measured in degrees Fahrenheit. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.21 |
||||||||
|
airFMModBlwr1ChokeTempC
mandatory
The temperature of the choke on the blower
controller. Measured in degrees Celsius. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.22 |
||||||||
|
airFMModBlwr1ChokeTempF
mandatory
The temperature of the choke on the blower
controller. Measured in degrees Fahrenheit. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.23 |
||||||||
|
airFMModBlwr1InverterTempC
mandatory
The temperature of the inverter on the blower
controller. Measured in degrees Celsius. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.24 |
||||||||
|
airFMModBlwr1InverterTempF
mandatory
The temperature of the inverter on the blower
controller. Measured in degrees Fahrenheit. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.6.2.1.25 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2
·
1 row entry
·
25 columns
Allows for getting information from each module in the system.
The module to get information from.
Indexes
airFMModBlwr2ModuleIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
airFMModBlwr2ModuleIndex
mandatory
The index of the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.1 |
||||||||
|
airFMModBlwr2CtrlType
mandatory
The type of blower controller.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.2 |
||||||||
|
airFMModBlwr2CmdFreq
mandatory
The requested operating frequency for the blower.
Measured in tenths of hertz. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.3 |
||||||||
|
airFMModBlwr2ActFreq
mandatory
The frequency at which the blower controller is
operating. Measured in tenths of hertz. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.4 |
||||||||
|
airFMModBlwr2Poles
mandatory
The number of poles of the blower motor that the
blower controller is controlling. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.5 |
||||||||
|
airFMModBlwr2RatedHorsePower
mandatory
The power rating of the blower motor. Measured in
hundredths of horsepower. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.6 |
||||||||
|
airFMModBlwr2RatedCurrent
mandatory
The current rating of the blower motor. Measured in
hundredths of amps. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.7 |
||||||||
|
airFMModBlwr2ActTorq
mandatory
The actual torque of the blower motor. Measured in
hundredths of percent. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.8 |
||||||||
|
airFMModBlwr2Current
mandatory
The percent of rated current drawn by the blower
motor. Measured in hundredths of percent. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.9 |
||||||||
|
airFMModBlwr2Vlt
mandatory
The voltage supplied to the blower motor. Measured
in tenths of volts RMS. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.10 |
||||||||
|
airFMModBlwr2DCLinkVlt
mandatory
The voltage of the blower controller's DC bus.
Measured in volts DC. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.11 |
||||||||
|
airFMModBlwr2AccTime
mandatory
The time to accelerate the blower to the specified
frequency. Measured in tenths of seconds. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.12 |
||||||||
|
airFMModBlwr2DecTime
mandatory
The time to decelerate the blower frequency to zero.
Measured in tenths of seconds. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.13 |
||||||||
|
airFMModBlwr2CapLife
mandatory
The remaining life of the main circuit capacitor.
Measured in tenths of percent. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.14 |
||||||||
|
airFMModBlwr2CtrlCoolFanLife
mandatory
The total operation time of the blower controller
cooling fan. Measured in hours. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.15 |
||||||||
|
airFMModBlwr2ElOvMode
mandatory
Enables or disables the electronic overload relay.
A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.16 |
||||||||
|
airFMModBlwr2ElOvSetting
mandatory
The electronic overload relay is activated when the
current exceeds this threshold. Measured in hundredths of amps. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.17 |
||||||||
|
airFMModBlwr2ElOvTimeConst
mandatory
The delay between the current exceeding the overload
threshold and the activation of the electronic overload relay. Measured in tenths of minutes. A value of -2147483648 indicates that this OID does not apply to this d… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.18 |
||||||||
|
airFMModBlwr2FanPower
mandatory
The actual power of the blower motor. Measured in
tenths of percent. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.19 |
||||||||
|
airFMModBlwr2HeatsinkTempC
mandatory
The temperature of the heatsink on the blower
controller. Measured in degrees Celsius. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.20 |
||||||||
|
airFMModBlwr2HeatsinkTempF
mandatory
The temperature of the heatsink on the blower
controller. Measured in degrees Fahrenheit. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.21 |
||||||||
|
airFMModBlwr2ChokeTempC
mandatory
The temperature of the choke on the blower
controller. Measured in degrees Celsius. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.22 |
||||||||
|
airFMModBlwr2ChokeTempF
mandatory
The temperature of the choke on the blower
controller. Measured in degrees Fahrenheit. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.23 |
||||||||
|
airFMModBlwr2InverterTempC
mandatory
The temperature of the inverter on the blower
controller. Measured in degrees Celsius. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.24 |
||||||||
|
airFMModBlwr2InverterTempF
mandatory
The temperature of the inverter on the blower
controller. Measured in degrees Fahrenheit. A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.7.2.1.25 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2
·
1 row entry
·
15 columns
Allows for getting information from each module in the system.
The module to get information from.
Indexes
airFMModRHModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airFMModRHModuleIndex
mandatory
The index of the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.1 |
||||||
|
airFMModRHComp1
mandatory
Compressor 1 run hours.
A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.2 |
||||||
|
airFMModRHComp2
mandatory
Compressor 2 run hours.
A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.3 |
||||||
|
airFMModRHHeater
mandatory
Heater run hours.
A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.4 |
||||||
|
airFMModRHHum
mandatory
Humidifier run hours
A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.5 |
||||||
|
airFMModRHBlwr1
mandatory
Blower 1 run hours.
A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.6 |
||||||
|
airFMModRHBlwr2
mandatory
Blower 2 run hours.
A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.7 |
||||||
|
airFMModRHBlwrCtrl1
mandatory
Blower Controller 1 run hours.
A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.8 |
||||||
|
airFMModRHBlwrCtrl2
mandatory
Blower Controller 2 run hours.
A value of -2147483648 indicates that this OID does not apply to this device due to its configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.9 |
||||||
|
airFMModRHComp1Reset
mandatory
Reset the compressor 1 run hours.
Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.10 |
||||||
|
airFMModRHComp2Reset
mandatory
Reset the compressor 2 run hours.
Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.11 |
||||||
|
airFMModRHHeaterReset
mandatory
Reset the heater run hours.
Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.12 |
||||||
|
airFMModRHHumReset
mandatory
Reset the humidifier run hours.
Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.13 |
||||||
|
airFMModRHBlwr1Reset
mandatory
Reset the blower 1 run hours.
Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.14 |
||||||
|
airFMModRHBlwr2Reset
mandatory
Reset the blower 2 run hours.
Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.8.2.1.15 |
.1.3.6.1.4.1.318.1.1.13.1.5.10.2
·
1 row entry
·
9 columns
Allows for getting information from each module in the system.
The module to get information from.
Indexes
airFMModServIntResetModuleIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airFMModServIntResetModuleIndex
mandatory
The index of the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.5.10.2.1.1 |
||||||
|
airFMModServIntComp1Reset
mandatory
Reset the compressor 1 service interval maintenance
alarm. Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its con… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.10.2.1.2 |
||||||
|
airFMModServIntComp2Reset
mandatory
Reset the compressor 2 service interval maintenance
alarm. Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its con… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.10.2.1.3 |
||||||
|
airFMModServIntHeaterReset
mandatory
Reset the heater service interval maintenance alarm.
Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its configura… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.10.2.1.4 |
||||||
|
airFMModServIntHumReset
mandatory
Reset the humidifier service interval maintenance
alarm. Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its confi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.10.2.1.5 |
||||||
|
airFMModServIntBlwr1Reset
mandatory
Reset the blower 1 service interval maintenance
alarm. Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its configu… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.10.2.1.6 |
||||||
|
airFMModServIntBlwr2Reset
mandatory
Reset the blower 2 service interval maintenance
alarm. Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to its configu… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.10.2.1.7 |
||||||
|
airFMModServIntBlwrCtrl1Reset
mandatory
Reset the blower controller 1 service interval
maintenance alarm. Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.10.2.1.8 |
||||||
|
airFMModServIntBlwrCtrl2Reset
mandatory
Reset the blower controller 2 service interval
maintenance alarm. Getting this OID will do nothing and return the noOperation value. A value of notApplicable indicates that this OID does not apply to this device due to … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.5.10.2.1.9 |
.1.3.6.1.4.1.318.1.1.13.1.6.4
·
1 row entry
·
7 columns
Table of active alarm conditions for the device.
Alarm condition specification
Indexes
airFMAlarmConditionsIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
airFMAlarmConditionsIndex
mandatory
Alarm condition index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.6.4.1.1 |
||||||||||
|
airFMAlarmSeverity
mandatory
Severity of the alarm.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.6.4.1.2 |
||||||||||
|
airFMAlarmType
mandatory
Type of alarm.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.1.6.4.1.3 |
||||||||||
|
airFMEventCode
mandatory
APC event code for the alarm.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.1.6.4.1.4 |
||||||||||
|
airFMAlarmDate
mandatory
Date the alarm was recorded.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.6.4.1.5 |
||||||||||
|
airFMAlarmTime
mandatory
Time the alarm was recorded.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.1.6.4.1.6 |
||||||||||
|
airFMAlarmDescription
mandatory
Description of the alarm.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.318.1.1.13.1.6.4.1.7 |
.1.3.6.1.4.1.318.1.1.13.3.1.2
·
1 row entry
·
3 columns
Table of active alarm conditions for the device.
Alarm condition specification
Indexes
airIRAlarmConditionsIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRAlarmConditionsIndex
mandatory
Alarm condition index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.3.1.2.1.1 |
|
airIREventCode
mandatory
Code for the alarm.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.3.1.2.1.2 |
|
airIRAlarmDescription
mandatory
Description of the alarm.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.318.1.1.13.3.1.2.1.3 |
.1.3.6.1.4.1.318.1.1.13.4.3.2
·
1 row entry
·
3 columns
Table of active alarms for the device.
Alarms specification
Indexes
airIRG2AlarmsIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG2AlarmsIndex
mandatory
Alarm index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.4.3.2.1.1 |
|
airIRG2AlarmsEventCode
mandatory
Code for the alarm.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.4.3.2.1.2 |
|
airIRG2AlarmsDescription
mandatory
Description of the alarm.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.318.1.1.13.4.3.2.1.3 |
.1.3.6.1.4.1.318.1.1.13.4.5.2.2.5
·
1 row entry
·
3 columns
Allows for getting run hour information from each power supply.
The run hours fan power supply table entry.
Indexes
airIRG2RDT2RunHoursFanPSIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
airIRG2RDT2RunHoursFanPSIndex
mandatory
Index of run hours fan power supply table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.4.5.2.2.5.1.1 |
||||||||
|
airIRG2RDT2RunHoursFanPSHours
mandatory
Fan power supply run time in hours.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.4.5.2.2.5.1.2 |
||||||||
|
airIRG2RDT2RunHoursFanPSPosition
mandatory
Position of fan power supply within the unit.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.4.5.2.2.5.1.3 |
.1.3.6.1.4.1.318.1.1.13.4.5.2.2.7
·
1 row entry
·
2 columns
Allows for getting information from each evaporator fan run hour in the system.
Allows for getting information from each evaporator fan run
hour in the system.
hour in the system.
Indexes
airIRG2RDT2RunHoursEvapFanIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG2RDT2RunHoursEvapFanIndex
mandatory
Index of run hours evaporator fan table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.4.5.2.2.7.1.1 |
|
airIRG2RDT2RunHoursEvapFanHours
mandatory
Evaporator fan run time in hours.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.4.5.2.2.7.1.2 |
.1.3.6.1.4.1.318.1.1.13.5.2.2
·
1 row entry
·
3 columns
Table of active alarms for the device.
Alarms specification
Indexes
airIRmAlarmsIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRmAlarmsIndex
mandatory
Alarm index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.5.2.2.1.1 |
|
airIRmAlarmsEventCode
mandatory
Code for the alarm.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.5.2.2.1.2 |
|
airIRmAlarmsDescription
mandatory
Description of the alarm.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.318.1.1.13.5.2.2.1.3 |
.1.3.6.1.4.1.318.1.1.13.6.1.2
·
1 row entry
·
11 columns
Allows to get ident information of current RDU and its assigned CM's.
The ident table entry.
Indexes
airIRG3IdentIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG3IdentIndex
mandatory
Index of ident table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.1.2.1.1 |
|
airIRG3IdentName
mandatory
A character string identifying the unit name.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.1.2.1.2 |
|
airIRG3IdentLocation
mandatory
A character string identifying the unit location.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.1.2.1.3 |
|
airIRG3IdentModelNumber
mandatory
A character string identifying the unit model number.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.1.2.1.4 |
|
airIRG3IdentSerialNumber
mandatory
A character string identifying the unit serial number.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.1.2.1.5 |
|
airIRG3IdentFirmwareRevision
mandatory
A character string identifying the unit firmware version.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.1.2.1.6 |
|
airIRG3IdentHardwareRevision
mandatory
A character string identifying the unit controller hardware revision.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.1.2.1.7 |
|
airIRG3IdentManufactureDate
mandatory
A character string identifying the unit manufacture date.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.1.2.1.8 |
|
airIRG3IdentRDUSysOID
mandatory
This OID contains an OID path to the RDU data.
|
ObjectIdentifier | .1.3.6.1.4.1.318.1.1.13.6.1.2.1.9 |
|
airIRG3IdentCMSysOID
mandatory
This OID contains an OID path to the cooling module data.
|
ObjectIdentifier | .1.3.6.1.4.1.318.1.1.13.6.1.2.1.10 |
|
airIRG3IdentGroupSysOID
mandatory
This OID contains an OID path to the group data.
|
ObjectIdentifier | .1.3.6.1.4.1.318.1.1.13.6.1.2.1.11 |
.1.3.6.1.4.1.318.1.1.13.6.2.2
·
1 row entry
·
22 columns
Allows to get group status information.
The group staus table entry.
Indexes
airIRG3GroupStatusIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG3GroupStatusIndex
mandatory
Index of group status table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.1 |
|
airIRG3GroupStatusCoolOutput
mandatory
The group cooling output in tenths of kilowatts (kW).
Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.2 |
|
airIRG3GroupStatusCoolDemand
mandatory
The group cooling demand in tenths of kilowatts (kW).
Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.3 |
|
airIRG3GroupStatusAirFlowUS
mandatory
The group air flow in cubic feet per minute (CFM).
Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.4 |
|
airIRG3GroupStatusAirFlowMetric
mandatory
The group air flow in liters per second (L/s).
Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.5 |
|
airIRG3GroupStatusMaxRackInletTempUS
mandatory
The group maximum rack inlet temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.6 |
|
airIRG3GroupStatusMaxRackInletTempMetric
mandatory
The group maximum rack inlet temperature in tenths of
degrees Celsius. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.7 |
|
airIRG3GroupStatusMinRackInletTempUS
mandatory
The group minimum rack inlet temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.8 |
|
airIRG3GroupStatusMinRackInletTempMetric
mandatory
The group minimum rack inlet temperature in tenths of
degrees Celsius. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.9 |
|
airIRG3GroupStatusMaxReturnAirTempUS
mandatory
The group maximum return air temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.10 |
|
airIRG3GroupStatusMaxReturnAirTempMetric
mandatory
The group maximum return air temperature in tenths of
degrees Celsius. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.11 |
|
airIRG3GroupStatusMinReturnAirTempUS
mandatory
The group minimum return air temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.12 |
|
airIRG3GroupStatusMinReturnAirTempMetric
mandatory
The group minimum return air temperature in tenths of
degrees Celsius. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.13 |
|
airIRG3GroupStatusAvgSupplyTempUS
mandatory
The group average supply air temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.14 |
|
airIRG3GroupStatusAvgSupplyTempMetric
mandatory
The group average supply air temperature in tenths of
degrees Celsius. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.15 |
|
airIRG3GroupStatusAvgReturnTempUS
mandatory
The group average return air temperature in tenths of
degrees Fahrenheit. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.16 |
|
airIRG3GroupStatusAvgReturnTempMetric
mandatory
The group average return air temperature in tenths of
degrees Celsius. Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.17 |
|
airIRG3GroupStatusAvgFanSpeed
mandatory
The group average fan speed in revolutions per minute (RPM).
Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.18 |
|
airIRG3GroupStatusAvgAirFlowUS
mandatory
The group average air flow in cubic feet per minute (CFM).
Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.19 |
|
airIRG3GroupStatusAvgAirFlowMetric
mandatory
The group average air flow in liters per second (L/s).
Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.20 |
|
airIRG3GroupStatusTotalAirFlowUS
mandatory
The group total air flow in cubic feet per minute (CFM).
Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.21 |
|
airIRG3GroupStatusTotalAirFlowMetric
mandatory
The group total air flow in liters per second (L/s).
Returns (-1) if not supported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.2.1.22 |
.1.3.6.1.4.1.318.1.1.13.6.2.3
·
1 row entry
·
10 columns
Allows to access the group setpoints.
The group setpoints table entry.
Indexes
airIRG3GroupSetpointsIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
airIRG3GroupSetpointsIndex
mandatory
Index of group setpoints table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.1 |
||||||||||
|
airIRG3GroupSetpointsCoolSetpointUS
mandatory
Group cooling setpoint in tenths of
degrees Fahrenheit. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.2 |
||||||||||
|
airIRG3GroupSetpointsCoolSetpointMetric
mandatory
Group cooling setpoint in tenths of
degrees Celsius. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.3 |
||||||||||
|
airIRG3GroupSetpointsCoolDeadbandUS
mandatory
Group cooling deadband in tenths of
degrees Fahrenheit. Returns (-1) if not supported. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.4 |
||||||||||
|
airIRG3GroupSetpointsCoolDeadbandMetric
mandatory
Group cooling deadband in tenths of
degrees Celsius. Returns (-1) if not supported. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.5 |
||||||||||
|
airIRG3GroupSetpointsFanSpeedPreference
mandatory
The group preferred fan speed setting.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.6 |
||||||||||
|
airIRG3GroupSetpointsSupplyAirSetpointUS
mandatory
Group supply air setpoint in tenths of
degrees Fahrenheit. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.7 |
||||||||||
|
airIRG3GroupSetpointsSupplyAirSetpointMetric
mandatory
Group supply air setpoint in tenths of
degrees Celsius. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.8 |
||||||||||
|
airIRG3GroupSetpointsAirFlowControl
mandatory
The group air flow control.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.9 |
||||||||||
|
airIRG3GroupSetpointsLightingOnTime
mandatory
The group lighting on time in minutes.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.3.1.10 |
.1.3.6.1.4.1.318.1.1.13.6.2.4
·
1 row entry
·
12 columns
Allows to access group configuration table.
The group config table entry.
Indexes
airIRG3GroupConfigIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
airIRG3GroupConfigIndex
mandatory
Index of group config table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.1 |
||||||||
|
airIRG3GroupConfigNumberofCoolingUnits
mandatory
The number of cooling units.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.2 |
||||||||
|
airIRG3GroupConfigConfigurationType
mandatory
The group configuration type.
The spot configuration type is not supported. Returns (-1) if not supported. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.3 |
||||||||
|
airIRG3GroupConfigCapacityControlType
mandatory
The group capacity control. Returns (-1) if not supported.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.4 |
||||||||
|
airIRG3GroupConfigFanSpeedControl
mandatory
The group fan speed control.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.5 |
||||||||
|
airIRG3GroupConfigCoolGainP
mandatory
The gain component of the PID in hundredths.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.6 |
||||||||
|
airIRG3GroupConfigCoolResetRateI
mandatory
The integral component of the PID in hundredths.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.7 |
||||||||
|
airIRG3GroupConfigCoolDerivativeD
mandatory
The derivative component of the PID in hundredths.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.8 |
||||||||
|
airIRG3GroupConfigCoolPIDReset
mandatory
Will reset the PID coefficients back to the factory defaults.
Readback is not supported, returns -1. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.9 |
||||||||
|
airIRG3GroupConfigNumberofBackupUnits
mandatory
The number of backup units.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.10 |
||||||||
|
airIRG3GroupConfigRuntimeBalancingEnable
mandatory
Enable or disable runtime balancing feature.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.11 |
||||||||
|
airIRG3GroupConfigLoadAssistEnable
mandatory
Enable or disable load assist feature.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.2.4.1.12 |
.1.3.6.1.4.1.318.1.1.13.6.3.2
·
1 row entry
·
3 columns
Table of active alarms for the device.
Alarms specification
Indexes
airIRG3AlarmsIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG3AlarmsIndex
mandatory
Alarm index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.3.2.1.1 |
|
airIRG3AlarmsEventCode
mandatory
Event Code for the alarm. Returns (-1) if not supported.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.3.2.1.2 |
|
airIRG3AlarmsDescription
mandatory
Description of the alarm. Returns (-1) if not supported.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.318.1.1.13.6.3.2.1.3 |
.1.3.6.1.4.1.318.1.1.13.6.4.2
·
1 row entry
·
43 columns
Allows to access RDU status table.
The RDU status table entry.
Indexes
airIRG3RDUStatusDeviceIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
airIRG3RDUStatusDeviceIndex
mandatory
Index of RDU status table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.1 |
||||||||||
|
airIRG3RDUID
mandatory
The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.2 |
||||||||||
|
airIRG3RDUStatusOnReadyStandby
mandatory
The RDU current status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.3 |
||||||||||
|
airIRG3RDUStatusOperatingMode
mandatory
The RDU actual operating mode.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.4 |
||||||||||
|
airIRG3RDUStatusLeadPump
mandatory
The RDU lead pump.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.5 |
||||||||||
|
airIRG3RDUStatusStartupDelay
mandatory
The RDU start up delay in seconds.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.6 |
||||||||||
|
airIRG3RDUStatusPumpChangeOverInterval
mandatory
The RDU pump change over interval in days.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.7 |
||||||||||
|
airIRG3RDUStatusStopOnLeakDetect
mandatory
The RDU status of stop on leak detect.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.8 |
||||||||||
|
airIRG3RDUStatusPowerSource
mandatory
The RDU power source status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.9 |
||||||||||
|
airIRG3RDUStatusTotalRDUOutputPower
mandatory
The RDU output power in tenths of kilowatts (kW).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.10 |
||||||||||
|
airIRG3RDUStatusInletWaterTempUS
mandatory
The RDU inlet water temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.11 |
||||||||||
|
airIRG3RDUStatusInletWaterTempMetric
mandatory
The RDU inlet water temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.12 |
||||||||||
|
airIRG3RDUStatusOutletWaterTempUS
mandatory
The RDU outlet water temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.13 |
||||||||||
|
airIRG3RDUStatusOutletWaterTempMetric
mandatory
The RDU outlet water temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.14 |
||||||||||
|
airIRG3RDUStatusCondenserSaturationTempUS
mandatory
The RDU condenser saturation temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.15 |
||||||||||
|
airIRG3RDUStatusCondenserSaturationTempMetric
mandatory
The RDU condenser saturation temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.16 |
||||||||||
|
airIRG3RDUStatusDewPointTempUS
mandatory
The RDU dew point temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.17 |
||||||||||
|
airIRG3RDUStatusDewPointTempMetric
mandatory
The RDU dew point temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.18 |
||||||||||
|
airIRG3RDUStatusPumpOutletTempUS
mandatory
The RDU pump outlet temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.19 |
||||||||||
|
airIRG3RDUStatusPumpOutletTempMetric
mandatory
The RDU pump outlet temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.20 |
||||||||||
|
airIRG3RDUStatusSubcoolerOutletTempUS
mandatory
The RDU sub cooler outlet temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.21 |
||||||||||
|
airIRG3RDUStatusSubcoolerOutletTempMetric
mandatory
The RDU sub cooler outlet temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.22 |
||||||||||
|
airIRG3RDUStatusCondenserOutletTempUS
mandatory
The RDU condenser outlet temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.23 |
||||||||||
|
airIRG3RDUStatusCondenserOutletTempMetric
mandatory
The RDU condenser outlet temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.24 |
||||||||||
|
airIRG3RDUStatusCondenserInletTempUS
mandatory
The RDU condenser inlet temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.25 |
||||||||||
|
airIRG3RDUStatusCondenserInletTempMetric
mandatory
The RDU condenser inlet temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.26 |
||||||||||
|
airIRG3RDUStatusCondenserOutletPressureUS
mandatory
The RDU condenser outlet pressure in
pounds per square inch (PSI). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.27 |
||||||||||
|
airIRG3RDUStatusCondenserOutletPressureMetric
mandatory
The RDU condenser outlet pressure in kiloPascals (KPa).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.28 |
||||||||||
|
airIRG3RDUStatusPump1HeadPressureUS
mandatory
The RDU Pump 1 head pressure in pounds per square inch (PSI).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.29 |
||||||||||
|
airIRG3RDUStatusPump1HeadPressureMetric
mandatory
The RDU Pump 1 head pressure in kiloPascals (KPa).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.30 |
||||||||||
|
airIRG3RDUStatusPump2HeadPressureUS
mandatory
The RDU Pump 2 head pressure in pounds per square inch (PSI).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.31 |
||||||||||
|
airIRG3RDUStatusPump2HeadPressureMetric
mandatory
The RDU Pump 2 head pressure in kiloPascals (KPa).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.32 |
||||||||||
|
airIRG3RDUStatusPump1Speed
mandatory
The RDU Pump 1 speed in revolutions per minute (RPM).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.33 |
||||||||||
|
airIRG3RDUStatusPump2Speed
mandatory
The RDU Pump 2 speed in revolutions per minute (RPM).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.34 |
||||||||||
|
airIRG3RDUStatusCWValvePosition
mandatory
The RDU CW Valve position in % open
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.35 |
||||||||||
|
airIRG3RDUStatusReceiverLiquidLevel
mandatory
The RDU receiver liquid level in % Full
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.36 |
||||||||||
|
airIRG3RDUStatusDCPowerSupply1Current
mandatory
The RDU DC Power Supply 1 Current in Amps
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.37 |
||||||||||
|
airIRG3RDUStatusDCPowerSupply2Current
mandatory
The RDU DC Power Supply 2 Current in Amps
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.38 |
||||||||||
|
airIRG3RDUStatusTotalDCPowerSupplyCurrent
mandatory
The RDU Total DC Power Supply Current in Amps
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.39 |
||||||||||
|
airIRG3RDUStatusInputState
mandatory
The RDU Input state.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.40 |
||||||||||
|
airIRG3RDUStatusOutputState
mandatory
The RDU Output state
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.41 |
||||||||||
|
airIRG3RDUStatusByPassValvePosition
mandatory
The RDU By Pass Valve position in % open
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.42 |
||||||||||
|
airIRG3RDUStatusRefrigerantLeakDetector
mandatory
The RDU refrigerant leak detector status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.2.1.43 |
.1.3.6.1.4.1.318.1.1.13.6.4.3
·
1 row entry
·
6 columns
Allows to access RDU run hours table.
The RDU run hours table entry.
Indexes
airIRG3RDURunHoursDeviceIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG3RDURunHoursDeviceIndex
mandatory
Index of RDU run hours table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.3.1.1 |
|
airIRG3RDURunHoursRDUID
mandatory
The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.4.3.1.2 |
|
airIRG3RDURunHoursPump1
mandatory
The RDU run hours of Pump 1.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.3.1.3 |
|
airIRG3RDURunHoursPump2
mandatory
The RDU run hours of Pump 2.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.3.1.4 |
|
airIRG3RDURunHoursPowerSupply1
mandatory
The RDU run hours of power supply 1.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.3.1.5 |
|
airIRG3RDURunHoursPowerSupply2
mandatory
The RDU run hours of power supply 2.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.3.1.6 |
.1.3.6.1.4.1.318.1.1.13.6.4.4
·
1 row entry
·
4 columns
Allows to access RDU service intervals table.
The service interval table entry.
Indexes
airIRG3RDUServiceIntervalsDeviceIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
airIRG3RDUServiceIntervalsDeviceIndex
mandatory
Index of service interval table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.4.1.1 |
||||
|
airIRG3RDUServiceIntervalsRDUID
mandatory
The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.4.4.1.2 |
||||
|
airIRG3RDUServiceIntervalsAirFilterInterval
mandatory
The RDU service interval for air filter in hours.
Returns -1 if not supported. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.4.1.3 |
||||
|
airIRG3RDUServiceIntervalsAirFilterAlarm
mandatory
The RDU service interval air filter alarm status.
Returns -1 if not supported. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.4.1.4 |
.1.3.6.1.4.1.318.1.1.13.6.4.5
·
1 row entry
·
4 columns
Allows to access RDU thresholds table.
The RDU thresholds table entry.
Indexes
airIRG3RDUThresholdsDeviceIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG3RDUThresholdsDeviceIndex
mandatory
Index of RDU thresholds table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.5.1.1 |
|
airIRG3RDUThresholdsRDUID
mandatory
The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.4.5.1.2 |
|
airIRG3RDUThresholdsEnteringFluidTempHighUS
mandatory
The RDU threshold for entering fluid temperature in tenths of
degrees Fahrenheit. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.5.1.3 |
|
airIRG3RDUThresholdsEnteringFluidTempHighMetric
mandatory
The RDU threshold for entering fluid temperature in tenths of
degrees Celsius. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.5.1.4 |
.1.3.6.1.4.1.318.1.1.13.6.4.6
·
1 row entry
·
1 columns
Allows to access RDU set points table.
The RDU set points table entry.
Indexes
airIRG3RDUSetpointsDeviceIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG3RDUSetpointsDeviceIndex
mandatory
Index of RDU set points table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.6.1.1 |
.1.3.6.1.4.1.318.1.1.13.6.4.7
·
1 row entry
·
13 columns
Allows to access RDU configuration table.
The RDU configuration table entry.
Indexes
airIRG3RDUConfigDeviceIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airIRG3RDUConfigDeviceIndex
mandatory
Index of RDU configuration table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.1 |
||||||
|
airIRG3RDUConfigRDUID
mandatory
The current RDU ID (1 to F).
Configured RDU only shall display ID, else return -1. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.2 |
||||||
|
airIRG3RDUConfigStopOnLeakDetect
mandatory
The RDU stop on leak detect set.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.3 |
||||||
|
airIRG3RDUConfigStartupDelay
mandatory
The RDU start up delay in seconds.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.4 |
||||||
|
airIRG3RDUConfigPumpChangeOverInterval
mandatory
The RDU pump change over interval in days.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.5 |
||||||
|
airIRG3RDUConfigPowerSource
mandatory
The RDU power source.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.6 |
||||||
|
airIRG3RDUConfigOutputSource
mandatory
The RDU output source.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.7 |
||||||
|
airIRG3RDUConfigInputNormalState
mandatory
The RDU Input Normal State.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.8 |
||||||
|
airIRG3RDUConfigOutputNormalState
mandatory
The RDU Output Normal State.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.9 |
||||||
|
airIRG3RDUConfigByPassValveEnabled
mandatory
The RDU By Pass Valve Enabled State.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.10 |
||||||
|
airIRG3RDUConfigRefrigerantLeakDetectorEnabled
mandatory
The RDU Refrigerant Leak Detector Enabled State.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.11 |
||||||
|
airIRG3RDUConfigCalibrateRefrigerantLeakDetector
mandatory
This parameter allows to calibrate the RDU Refrigerant Leak Detector and is write only.
The read returns -1. Only 'yes' is supported. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.12 |
||||||
|
airIRG3RDUConfigOnReadyStandby
mandatory
This parameter allows to configure RDU on/standby parameter.
Ready is currently not supported. If unsupported returns -1. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.4.7.1.13 |
.1.3.6.1.4.1.318.1.1.13.6.5.2
·
1 row entry
·
22 columns
Allows to access CM status table.
The CM status table entry.
Indexes
airIRG3CMStatusDeviceIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
airIRG3CMStatusDeviceIndex
mandatory
Index of CM status table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.1 |
||||||
|
airIRG3CMStatusCMID
mandatory
The CM ID (RDU Number - Group Number - CM Unit Number).
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.2 |
||||||
|
airIRG3CMStatusOperatingMode
mandatory
The current operating mode of the CM.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.3 |
||||||
|
airIRG3CMStatusUnitType
mandatory
The current CM unit type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.4 |
||||||
|
airIRG3CMStatusRackInletTempUS
mandatory
The CM rack inlet temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.5 |
||||||
|
airIRG3CMStatusRackInletTempMetric
mandatory
The CM rack inlet temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.6 |
||||||
|
airIRG3CMStatusReturnAirTempUS
mandatory
The CM return air temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.7 |
||||||
|
airIRG3CMStatusReturnAirTempMetric
mandatory
The CM return air temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.8 |
||||||
|
airIRG3CMStatusLiquidTempUS
mandatory
The CM liquid temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.9 |
||||||
|
airIRG3CMStatusLiquidTempMetric
mandatory
The CM liquid temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.10 |
||||||
|
airIRG3CMStatusVaporTempUS
mandatory
The CM vapor temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.11 |
||||||
|
airIRG3CMStatusVaporTempMetric
mandatory
The CM vapor temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.12 |
||||||
|
airIRG3CMStatusEvaporatorTempUS
mandatory
The CM saturation temperature in tenths of
degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.13 |
||||||
|
airIRG3CMStatusEvaporatorTempMetric
mandatory
The CM saturation temperature in tenths of
degrees Celsius. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.14 |
||||||
|
airIRG3CMStatusLiquidInletPressureUS
mandatory
The CM Liquid Inlet pressure in pounds per square inch (PSI).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.15 |
||||||
|
airIRG3CMStatusLiquidInletPressureMetric
mandatory
The CM Liquid Inlet pressure in kiloPascals (kPa).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.16 |
||||||
|
airIRG3CMStatusVaporOutletPressureUS
mandatory
The CM Vapor Outlet pressure in pounds per square inch (PSI).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.17 |
||||||
|
airIRG3CMStatusVaporOutletPressureMetric
mandatory
The CM Vapor Outlet pressure in kiloPascals (kPa).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.18 |
||||||
|
airIRG3CMStatusExpansionValvePosition
mandatory
The CM expansion valve position in % open
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.19 |
||||||
|
airIRG3CMStatusEPRValvePosition
mandatory
The CM Evaporator Pressure Regulator Valve Position
in tenths of percent open |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.20 |
||||||
|
airIRG3CMStatusLocalDisplayOnOffEnabled
mandatory
The status of the on/off control on the CM local display.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.21 |
||||||
|
airIRG3CMStatusAverageFanSpeed
mandatory
The CM Average Fan Speed.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.2.1.22 |
.1.3.6.1.4.1.318.1.1.13.6.5.3
·
1 row entry
·
8 columns
Allows to access CM run hours table.
The CM run hours table entry.
Indexes
airIRG3CMRunHoursDeviceIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG3CMRunHoursDeviceIndex
mandatory
Index of CM run hours table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.3.1.1 |
|
airIRG3CMRunHoursCMID
mandatory
The CM ID (RDU Number - Group Number - CM Unit Number).
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.5.3.1.2 |
|
airIRG3CMRunHoursFan1
mandatory
The CM run hours for Fan1.
Returns (-1) if not appilcable. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.3.1.3 |
|
airIRG3CMRunHoursFan2
mandatory
The CM run hours for Fan2.
Returns (-1) if not appilcable. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.3.1.4 |
|
airIRG3CMRunHoursFan3
mandatory
The CM run hours for Fan3.
Returns (-1) if not appilcable. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.3.1.5 |
|
airIRG3CMRunHoursFan4
mandatory
The CM run hours for Fan4.
Returns (-1) if not appilcable. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.3.1.6 |
|
airIRG3CMRunHoursFan5
mandatory
The CM run hours for Fan5.
Returns (-1) if not appilcable. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.3.1.7 |
|
airIRG3CMRunHoursAirFilter
mandatory
The CM run hours for air filter.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.3.1.8 |
.1.3.6.1.4.1.318.1.1.13.6.5.4
·
1 row entry
·
4 columns
Allows to access CM service intervals table.
The CM service interval table entry.
Indexes
airIRG3CMServiceIntervalsDeviceIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
airIRG3CMServiceIntervalsDeviceIndex
mandatory
Index of CM service intervals table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.4.1.1 |
||||
|
airIRG3CMServiceIntervalsCMID
mandatory
The CM ID (RDU Number - Group Number - CM Unit Number).
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.5.4.1.2 |
||||
|
airIRG3CMServiceIntervalsAirFilterInterval
mandatory
The CM service interval for air filter in weeks.
Supported only for RA. Returns -1 if not supported. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.4.1.3 |
||||
|
airIRG3CMServiceIntervalsAirFilterAlarm
mandatory
The CM service interval air filter alarm status.
Supported only for RA. Returns -1 if not supported. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.5.4.1.4 |
.1.3.6.1.4.1.318.1.1.13.6.5.5
·
1 row entry
·
8 columns
Allows to access CM thresholds table.
The CM thresholds table entry.
Indexes
airIRG3CMThresholdsDeviceIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG3CMThresholdsDeviceIndex
mandatory
Index for CM thresholds table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.5.1.1 |
|
airIRG3CMThresholdsCMID
mandatory
The CM ID (RDU Number - Group Number - CM Unit Number).
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.5.5.1.2 |
|
airIRG3CMThresholdsRackInletTempHighUS
mandatory
The CM high threshold for rack inlet temperature in tenths of
degrees Fahrenheit. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.5.1.3 |
|
airIRG3CMThresholdsRackInletTempHighMetric
mandatory
The CM high threshold for rack inlet temperature in tenths of
degrees Celsius. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.5.1.4 |
|
airIRG3CMThresholdsSupplyAirTempHighUS
mandatory
The CM high threshold for supply air temperature in tenths of
degrees Fahrenheit. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.5.1.5 |
|
airIRG3CMThresholdsSupplyAirTempHighMetric
mandatory
The CM high threshold for supply air temperature in tenths of
degrees Celsius. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.5.1.6 |
|
airIRG3CMThresholdsReturnAirTempHighUS
mandatory
The CM high threshold for return air temperature in tenths of
degrees Fahrenheit. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.5.1.7 |
|
airIRG3CMThresholdsReturnAirTempHighMetric
mandatory
The CM high threshold for return air temperature in tenths of
degrees Celsius. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.5.1.8 |
.1.3.6.1.4.1.318.1.1.13.6.5.6
·
1 row entry
·
1 columns
Allows to access CM set points table.
The CM set points table entry.
Indexes
airIRG3CMSetpointsDeviceIndex
| Column | Syntax | OID |
|---|---|---|
|
airIRG3CMSetpointsDeviceIndex
mandatory
Index of CM set points table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.6.1.1 |
.1.3.6.1.4.1.318.1.1.13.6.5.7
·
1 row entry
·
6 columns
Allows to access CM configuration table.
The CM configuration table entry.
Indexes
airIRG3CMConfigDeviceIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
airIRG3CMConfigDeviceIndex
mandatory
Index of CM configuration table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.7.1.1 |
||||
|
airIRG3CMConfigCMID
mandatory
The CM ID (RDU Number - Group Number - CM Unit Number).
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.13.6.5.7.1.2 |
||||
|
airIRG3CMConfigStopOnCoolFail
mandatory
Enable/Disable Stop On cool fail. When enabled, stops the unit
if it detects that it is blowing warm air into the cold aisle. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.5.7.1.3 |
||||
|
airIRG3CMConfigStartupDelay
mandatory
The CM start up delay in seconds.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.13.6.5.7.1.4 |
||||
|
airIRG3CMConfigRemoteOnStandby
mandatory
The CM configuration for operating mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.5.7.1.5 |
||||
|
airIRG3CMConfigPowerSource
mandatory
The CM power source.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.13.6.5.7.1.6 |
.1.3.6.1.4.1.318.1.1.14.1.1
·
1 row entry
·
2 columns
Allows for query of the individual devices. The number of entries is contained in the rARUStatusAruDeviceCount OID.
The device to query.
Indexes
rARUIdentAruIndex
| Column | Syntax | OID |
|---|---|---|
|
rARUIdentAruIndex
mandatory
The index to the ARU entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.1.1.1.1 |
|
rARUIdentName
mandatory
A character string identifying the device.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.14.1.1.1.2 |
.1.3.6.1.4.1.318.1.1.14.2.1
·
1 row entry
·
6 columns
Allows for configuration of the individual ARU devices accessible from this IP address. The number of entries is contained in the rARUStatusAruDeviceCount OID.
The ARUs to configure.
Indexes
rARUConfigAruIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rARUConfigAruIndex
mandatory
The index to the ARU entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.2.1.1.1 |
||||||||||||||||||||||||||||||||||||
|
rARUConfigAruName
mandatory
The name of the ARU.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.14.2.1.1.2 |
||||||||||||||||||||||||||||||||||||
|
rARUConfigAruRemoteSetpoint
mandatory
This OID defines the desired base airflow of the ARU, and sets the
speed of the ARU fans when the temperature override is inactive. Values specified in cfm (cubic feet per minute) can be converted to metr… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.2.1.1.3 |
||||||||||||||||||||||||||||||||||||
|
rARUConfigAruTempOvrdEnableDisable
mandatory
This OID is used to enable/disable the remote temperature override setting of the ARU.
If this OID is set to 1, the remote setting for temperature override is disabled. If this OID is set to 2, the remote… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.2.1.1.4 |
||||||||||||||||||||||||||||||||||||
|
rARUConfigAruTempOvrdSetpoint
mandatory
This OID is the Temperature Override setpoint of the ARU.
NOTE: -1 will be returned if the ARU is not communicating. Values are represented in whole number degrees using the units specified… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.2.1.1.5 |
||||||||||||||||||||||||||||||||||||
|
rARUConfigAruMasterControl
mandatory
This is the master on/off control for the ARU.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.2.1.1.6 |
.1.3.6.1.4.1.318.1.1.14.3.3
·
1 row entry
·
14 columns
Allows for query of the individual ARUs accessible from this IP address. The number of entries is contained in the rARUStatusAruDeviceCount OID.
The ARUs to access.
Indexes
rARUStatusAruIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rARUStatusAruIndex
mandatory
The index to the ARU entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.3.3.1.1 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruName
mandatory
The name of the ARU.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.14.3.3.1.2 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruRemoteSetpoint
mandatory
This OID defines the desired base airflow of the ARU, or the
speed of the ARU fans when the temperature override is inactive. See also the rARUConfigAruRemoteSetpoint OID. NOTE: -1 will be … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.3.3.1.3 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruManualSetpoint
mandatory
Manual operating setpoint of the ARU, which is set on the
panel of the ARU. If the ARU doesn't have a manual , the OID will always return a value of aruRem (10). NOTE: -1 will be returned if the ARU is no… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.3.3.1.4 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruTemp1
mandatory
ARU temperature probe #1 reading.
The summary exhaust temperature on 2nd generation ARUs. NOTE: -1 will be returned if the ARU is not communicating. Values are represented in whole number d… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.3.3.1.5 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruTemp2
mandatory
ARU temperature probe #2 reading.
The exhaust temperature in the upper plenum on 2nd generation ARUs. NOTE: -1 will be returned if the ARU is not communicating. Values are represented in wh… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.3.3.1.6 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruTemp3
mandatory
ARU temperature probe #3 reading.
The exhaust temperature in the lower plenum on 2nd generation ARUs. NOTE: -1 will be returned if the ARU is not communicating. Values are represented in wh… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.3.3.1.7 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruTempOvrdEnableDisable
mandatory
This OID indicates whether the ARU remote temperature override is enabled or disabled.
If this OID is a 1, the remote setting for temperature override is disabled. If this OID is a 2, the remote setting for temperature … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.3.3.1.8 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruTempOvrdSetpoint
mandatory
ARU remote temperature override setpoint setting.
NOTE: -1 will be returned if the ARU is not communicating. Values are represented in whole number degrees. Units are displayed in the scale… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.3.3.1.9 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruAlarmState
mandatory
An ASCII string containing the 8 flags representing
the current alarm state of the ARU. If the state of the ARU is unknown, this variable is set to 'UNKNOWN'. The flags are numbered 1 to 8, read from left… |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.14.3.3.1.10 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruCommStatus
mandatory
The state of communications to the device.
commNeverDiscovered(1) indicates there has never been communications with this device. commsEstablished(2) indicates communication is normal and active with this device. commsL… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.3.3.1.11 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruTempOvrdStatus
mandatory
Specifies whether the ARU is increasing airflow because
exhaust air temperature has exceeded the setting specified in the rARUConfigAruTempOvrdSetpoint OID. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.3.3.1.12 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruMasterControl
mandatory
This is the master on/off control for the ARU.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.3.3.1.13 |
||||||||||||||||||||||||||||||||||||
|
rARUStatusAruTotalAirflow
mandatory
The total airflow provided by the aru. Specified in cfm (cubic feet per minute).
Can be converted to metric values using the conversion factor: 1 cfm = 1.70 m^3/hr (cubic meters per hour). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.3.3.1.14 |
.1.3.6.1.4.1.318.1.1.14.4.1
·
1 row entry
·
11 columns
Allows for query of the individual devices. The number of entries is contained in the rARUStatusAruDeviceCount OID.
The device to query.
Indexes
rARUFanStatusAruIndex rARUFanStatusFanIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rARUFanStatusAruIndex
mandatory
The index to the ARU entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.4.1.1.1 |
||||||||||||||
|
rARUFanStatusNominalFanSpeed
mandatory
The nominal rotational speed (RPM) of the fans when they are
operating at the 100% level. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.4.1.1.2 |
||||||||||||||
|
rARUFanStatusSelectedFanLevel
mandatory
The currently selected ARU speed level,
specified in percent of full capacity. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.4.1.1.3 |
||||||||||||||
|
rARUFanStatusReplacementThreshold
mandatory
Threshold above which a run hour alarm will exist, indicating
that it might be time to proactively replace a fan. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.4.1.1.4 |
||||||||||||||
|
rARUFanStatusFanIndex
mandatory
The index to an individual fan table entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.4.1.1.5 |
||||||||||||||
|
rARUFanStatusFanOperatingStatus
mandatory
The current operating state of the fan.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.4.1.1.6 |
||||||||||||||
|
rARUFanStatusFanRpmSpeed
mandatory
The current rotational speed of the fan,
specified in rotations per minute (RPM). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.4.1.1.7 |
||||||||||||||
|
rARUFanStatusFanFlowRate
mandatory
The flow rate provided by the fan, based on its measured rotational speed.
Specified in cfm (cubic feet per minute). Can be converted to metric values using the conversion factor: 1 cfm = 1.70 m^3/hr (cubic meters per h… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.4.1.1.8 |
||||||||||||||
|
rARUFanStatusFanInServiceDate
mandatory
The installation/replacement date of the fan.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.14.4.1.1.9 |
||||||||||||||
|
rARUFanStatusFanRunhourCounter
mandatory
The total time for which the fan has been running.
Specified in 10ths of hours. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.4.1.1.10 |
||||||||||||||
|
rARUFanStatusFanRunhourReset
mandatory
Writing yes to this This OID will reset a fan's total run hour counter,
which is shown in the rARUFanStatusFanRunhourCounter OID. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.4.1.1.11 |
.1.3.6.1.4.1.318.1.1.14.5.1
·
1 row entry
·
4 columns
Allows for query of the individual ARUs accessible from this IP address. The number of entries is contained in the rARUStatusAruDeviceCount OID.
The device to query.
Indexes
rARUPowerStatusAruIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
rARUPowerStatusAruIndex
mandatory
The index to the ARU entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.5.1.1.1 |
||||
|
rARUPowerStatusPrimaryAcPresent
mandatory
Indicates whether or not line voltage is present on AC input 1.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.5.1.1.2 |
||||
|
rARUPowerStatusAuxiliaryAcPresent
mandatory
Indicates whether or not line voltage is present on AC input 2.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.5.1.1.3 |
||||
|
rARUPowerStatusRedundantAcConfig
mandatory
Indicates whether or not a dual cord is in use.
When this setting is set to dualCord (2), aruRedundantPowerLostAlarm traps will be generated when either primary or auxiliary input voltage is not present. When this setti… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.14.5.1.1.4 |
.1.3.6.1.4.1.318.1.1.14.6.2
·
1 row entry
·
3 columns
Allows for getting environmental sensor status information.
The unit to get data from.
Indexes
rARUSensorsStatusAruIndex rARUSensorsStatusSensorNumber
| Column | Syntax | OID |
|---|---|---|
|
rARUSensorsStatusAruIndex
mandatory
The index to the ARU entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.2.1.1 |
|
rARUSensorsStatusSensorNumber
mandatory
The number of the sensor on the device.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.2.1.2 |
|
rARUSensorsTemperature
mandatory
The sensor's current temperature reading. The temperature scale
is based on the system preferences configuration. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.2.1.3 |
.1.3.6.1.4.1.318.1.1.14.6.4
·
1 row entry
·
17 columns
Allows for getting configuration information from environmental sensors attached to the device.
The unit to get data from.
Indexes
rARUSensorsConfigAruIndex rARUSensorsConfigSensorNumber
| Column | Syntax | OID |
|---|---|---|
|
rARUSensorsConfigAruIndex
mandatory
The index to the ARU entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.1 |
|
rARUSensorsConfigSensorNumber
mandatory
The number of the sensor on the device.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.2 |
|
rARUSensorsName
mandatory
A descriptive name for the sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.14.6.4.1.3 |
|
rARUSensorsLocation
mandatory
The location of the sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.14.6.4.1.4 |
|
rARUSensorsTempMaxThresh
mandatory
The temperature at which a maximum temperature threshold
violation alarm will be generated for this sensor. The temperature scale is based on the system preferences configuration. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.5 |
|
rARUSensorsTempHighThresh
mandatory
The temperature at which a high temperature threshold
violation alarm will be generated for this sensor. The temperature scale is based on the system preferences configuration. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.6 |
|
rARUSensorsTempLowThresh
mandatory
The temperature at which a low temperature threshold
violation alarm will be generated for this sensor. The temperature scale is based on the system preferences configuration. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.7 |
|
rARUSensorsTempMinThresh
mandatory
The temperature at which a min temperature threshold
violation alarm will be generated for this sensor. The temperature scale is based on the system preferences configuration. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.8 |
|
rARUSensorsTempThreshHysteresis
mandatory
The change in temperature required to cause a
temperature alarm to change from an active to an inactive state. The temperature scale is based on the system preferences configuration. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.9 |
|
rARUSensorsTempShortDecRateThreshValue
mandatory
The value of the temperature short-term decreasing rate
time that will cause an alarm to be generated. The temperature scale is based on the system preferences configuration. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.10 |
|
rARUSensorsTempShortDecRateThreshTime
mandatory
The time over which the temperature may not decrease
beyond the value specified by the temperature short-term decreasing rate threshold value. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.11 |
|
rARUSensorsTempShortIncRateThreshValue
mandatory
The value of the temperature short-term increasing rate
time that will cause an alarm to be generated. The temperature scale is based on the system preferences configuration. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.12 |
|
rARUSensorsTempShortIncRateThreshTime
mandatory
The time over which the temperature may not increase
beyond the value specified by the temperature short-term increasing rate threshold value. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.13 |
|
rARUSensorsTempLongDecRateThreshValue
mandatory
The value of the temperature long-term decreasing rate
time that will cause an alarm to be generated. The temperature scale is based on the system preferences configuration. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.14 |
|
rARUSensorsTempLongDecRateThreshTime
mandatory
The time over which the temperature may not decrease
beyond the value specified by the temperature long-term decreasing rate threshold value. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.15 |
|
rARUSensorsTempLongIncRateThreshValue
mandatory
The value of the temperature long-term increasing rate
time that will cause an alarm to be generated. The temperature scale is based on the system preferences configuration. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.16 |
|
rARUSensorsTempLongIncRateThreshTime
mandatory
The time over which the temperature may not increase
beyond the value specified by the temperature long-term increasing rate threshold value. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.14.6.4.1.17 |
.1.3.6.1.4.1.318.1.1.15.3.1.4
·
1 row entry
·
3 columns
A list of input voltage table entries. The number of entries are the phase entries. The number of entries is contained in the xPDUMainInputVoltageTableSize OID.
An entry containing information applicable to a
particular main input voltage phase.
particular main input voltage phase.
Indexes
xPDUMainInputVoltagePhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xPDUMainInputVoltagePhaseIndex
mandatory
Description of each input phase entry in the table.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.3.1.4.1.1 |
||||||
|
xPDUMainInputVoltageLtoL
mandatory
Line-to-line PDU input voltage when an isolation transformer is present,
or -1 if no transformer present in this PDU. Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.1.4.1.2 |
||||||
|
xPDUMainInputVoltageLtoN
mandatory
Line-to-neutral PDU input voltage when an isolation transformer is not present,
or -1 if a transformer is present in this PDU. Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.1.4.1.3 |
.1.3.6.1.4.1.318.1.1.15.3.2.4
·
1 row entry
·
3 columns
A list of output table entries. The number of entries are the phase entries. The number of entries is contained in the xPDUBypassInputVoltagePhaseTableSize OID.
An entry containing information applicable to a
particular bypass input voltage phase.
particular bypass input voltage phase.
Indexes
xPDUBypassInputVoltagePhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xPDUBypassInputVoltagePhaseIndex
mandatory
Index of each bypass input phase entry in the table.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.3.2.4.1.1 |
||||||
|
xPDUBypassInputVoltageLtoL
mandatory
Line-to-line bypass input voltage, or -1 if no bypass
feed is present in this PDU. Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.2.4.1.2 |
||||||
|
xPDUBypassInputVoltageLtoN
mandatory
Line-to-neutral bypass input voltage, or -1 if no bypass
feed is present in this PDU. Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.2.4.1.3 |
.1.3.6.1.4.1.318.1.1.15.3.3.2
·
1 row entry
·
2 columns
A list of UPS input table entries. The number of entries are the phase entries. The number of entries is contained in the xPDUUPSInputVoltagePhaseTableSize OID.
An entry containing information applicable to a
particular UPS input voltage phase.
particular UPS input voltage phase.
Indexes
xPDUUPSInputVoltagePhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xPDUUPSInputVoltagePhaseIndex
mandatory
Description of each UPS input phase entry in the table.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.3.3.2.1.1 |
||||||
|
xPDUUPSInputVoltageLtoNPresent
mandatory
Indicates whether or not voltage is present at the UPS feed.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.3.3.2.1.2 |
.1.3.6.1.4.1.318.1.1.15.3.4.14
·
1 row entry
·
7 columns
A list of system output table entries. The number of entries is contained in the xPDUSystemOutputTableSize OID.
An entry containing information applicable to a
particular system output phase.
particular system output phase.
Indexes
xPDUSystemOutputPhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xPDUSystemOutputPhaseIndex
mandatory
Description of each output phase entry in the table.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.3.4.14.1.1 |
||||||
|
xPDUSystemOutputVoltageLtoL
mandatory
Line-to-line system output voltage available at the circuit panel.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.4.14.1.2 |
||||||
|
xPDUSystemOutputVoltageLtoN
mandatory
Line-to-neutral system output voltage available at the circuit panel.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.4.14.1.3 |
||||||
|
xPDUSystemOutputPhaseCurrent
mandatory
System load current per phase. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.4.14.1.4 |
||||||
|
xPDUSystemOutputPower
mandatory
System output power per phase. Measured in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.4.14.1.5 |
||||||
|
xPDUSystemOutputApparentPower
mandatory
System output power per phase. Measured in tenths of kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.4.14.1.6 |
||||||
|
xPDUSystemOutputPowerFactor
mandatory
Indicates the Power Factor of the system output per phase.
A value of 100 representing a unity Power Factor (1.00). Measured in hundredths. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.3.4.14.1.7 |
.1.3.6.1.4.1.318.1.1.15.4.1.2
·
1 row entry
·
3 columns
A list of system breaker entries. The number of entries is contained in the xPDUSystemBreakerTableSize OID.
An entry containing information applicable to a
particular system breaker.
particular system breaker.
Indexes
xPDUSystemBreakerTableIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xPDUSystemBreakerTableIndex
mandatory
Index of system breaker entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.4.1.2.1.1 |
||||||
|
xPDUSystemBreakerDescription
mandatory
A brief description of the system breakers.
|
OctetString Constraints: range: 0-79 |
.1.3.6.1.4.1.318.1.1.15.4.1.2.1.2 |
||||||
|
xPDUSystemBreakerPosition
mandatory
Indicates whether this breaker is open(1) or closed(2).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.4.1.2.1.3 |
.1.3.6.1.4.1.318.1.1.15.4.2.3
·
1 row entry
·
11 columns
A list of branch breaker table entries. The number of entries is given by the value of xPDUBranchBreakerTableSize The number of entries is contained in the xPDUBranchBreakerTableSize OID.
An entry containing information applicable to a
particular branch breaker (panel position).
particular branch breaker (panel position).
Indexes
xPDUBranchBreakerTableIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
xPDUBranchBreakerTableIndex
mandatory
Index of branch breaker entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.1 |
||||
|
xPDUBranchBreakerRating
mandatory
Indicates current rating of this breaker.
0=Breaker is not present. 1=Earth leakage connection. 2=Neutral connection. A value greater than 2 indicates breaker current rating in Amps. A value above 60 Amp will signify a … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.2 |
||||
|
xPDUBranchBreakerRDPFeed
mandatory
Indicates that a breaker position is feeding a remote
distribution panel. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.3 |
||||
|
xPDUBranchBreakerTieIndicator
mandatory
Indicates whether or not the breaker in this position
is logically associated with the breaker immediately below it. This setting is used grouping the breakers feeding a multi-pole branch circuit. Note: When setting an … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.4 |
||||
|
xPDUBranchBreakerCurrent
mandatory
Indicates the branch current in tenths of Amps or -1 when not available.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.5 |
||||
|
xPDUBranchBreakerOverCurrentThreshold
mandatory
Threshold above which a branch circuit high current
condition will be generated. Specified as a percent of the branch breaker rating. A value of zero indicates that the threshold is disabled. Note: When setting branch c… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.6 |
||||
|
xPDUBranchBreakerUnderCurrentThreshold
mandatory
Threshold below which a branch circuit low current
condition will be generated. Specified as a percent of the branch breaker rating. A value of zero indicates that the threshold is disabled. Note: When setting branch ci… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.7 |
||||
|
xPDUBranchBreakerMaxCurrentThreshold
mandatory
Threshold above which a branch circuit maximum current
condition will be generated. Specified as a percent of the branch breaker rating. A value of zero indicates that the threshold is disabled. Note: When setting branc… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.8 |
||||
|
xPDUBranchBreakerMinCurrentThreshold
mandatory
Threshold below which a branch circuit minimum current
condition will be generated. Specified as a percent of the branch breaker rating. A value of zero indicates that the threshold is disabled. Note: When setting branc… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.9 |
||||
|
xPDUBranchBreakerName
mandatory
The description of the purpose/use of the breaker.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.10 |
||||
|
xPDUBranchBreakerLocation
mandatory
The description of the location of the breaker.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.15.4.2.3.1.11 |
.1.3.6.1.4.1.318.1.1.15.5.3
·
1 row entry
·
4 columns
A list of contacts supported by the PDU. The number of entries is contained in the xPDUInputContactTableSize OID.
A contact entry containing information for a given contact.
Indexes
xPDUInputContactNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xPDUInputContactNumber
mandatory
An index identifying the contact on the PDU.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.5.3.1.1 |
||||||
|
xPDUInputContactName
mandatory
The description of the purpose/use of the contact.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.15.5.3.1.2 |
||||||
|
xPDUInputContactNormalState
mandatory
The normal operating position of the contact.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.5.3.1.3 |
||||||
|
xPDUInputContactCurrentState
mandatory
This value indicates the current state of the contact.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.5.3.1.4 |
.1.3.6.1.4.1.318.1.1.15.6.3
·
1 row entry
·
4 columns
A list of output relays supported by the PDU. The number of entries is contained in the xPDUOutputRelayTableSize OID.
A output relay entry containing information for a given contact.
Indexes
xPDUOutputRelayNumber
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xPDUOutputRelayNumber
mandatory
An index identifying the output relay on the PDU.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.15.6.3.1.1 |
||||||
|
xPDUOutputRelayName
mandatory
The description of the purpose/use of the output relay.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.15.6.3.1.2 |
||||||
|
xPDUOutputRelayNormalState
mandatory
The normal operating position of the output relay.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.6.3.1.3 |
||||||
|
xPDUOutputRelayCurrentState
mandatory
This value indicates the current state of the output relay.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.15.6.3.1.4 |
.1.3.6.1.4.1.318.1.1.16.3.2
·
1 row entry
·
4 columns
Allows for getting calibration information from each unit in the system.
The unit to get data from.
Indexes
battManUnitCalibIndex
| Column | Syntax | OID |
|---|---|---|
|
battManUnitCalibIndex
mandatory
Index of unit calibration entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.3.2.1.1 |
|
battManUnitSerialNumber
mandatory
The serial number of the unit.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.16.3.2.1.2 |
|
battManBatteryVoltageZeroCalib
mandatory
The unit battery voltage zero calibration in millivolts.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.3.2.1.3 |
|
battManBatteryVoltageSpanCalib
mandatory
The unit battery voltage span calibration in hundredths of percent.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.3.2.1.4 |
.1.3.6.1.4.1.318.1.1.16.4.2
·
1 row entry
·
4 columns
Allows for getting calibration information from each string in the system.
The string to get data from.
Indexes
battManStringCalibIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
battManStringCalibIndex
mandatory
Index of string calibration entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.4.2.1.1 |
||||||||||
|
battManDCCurrentZeroCalib
mandatory
The string DC current zero calibration in tenths of amps.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.4.2.1.2 |
||||||||||
|
battManACCurrentZeroCalib
mandatory
The string AC current zero calibration in tenths of amps.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.4.2.1.3 |
||||||||||
|
battManProbeRange
mandatory
The string probe range in amps.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.4.2.1.4 |
.1.3.6.1.4.1.318.1.1.16.5.2
·
1 row entry
·
2 columns
Allows for getting calibration information from each battery in String 1.
The string to get data from.
Indexes
battManString1BatteryCalibIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString1BatteryCalibIndex
mandatory
Index of battery calibration entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.5.2.1.1 |
|
battManString1BatteryInterTierOhmicValue
mandatory
The battery inter-tier ohmic value in ohms. This corresponds to the ohmic
value for the positive terminal of the battery. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.5.2.1.2 |
.1.3.6.1.4.1.318.1.1.16.5.4
·
1 row entry
·
2 columns
Allows for getting calibration information from each battery in String 2.
The string to get data from.
Indexes
battManString2BatteryCalibIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString2BatteryCalibIndex
mandatory
Index of battery calibration entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.5.4.1.1 |
|
battManString2BatteryInterTierOhmicValue
mandatory
The battery inter-tier ohmic value in ohms.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.5.4.1.2 |
.1.3.6.1.4.1.318.1.1.16.9.2
·
1 row entry
·
13 columns
Allows for getting information from each string in the system.
The string to get data from.
Indexes
battManStringIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
battManStringIndex
mandatory
Index of string entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.9.2.1.1 |
||||
|
battManStringCurrent
mandatory
The string current in tenths of amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.9.2.1.2 |
||||
|
battManStringRippleCurrent
mandatory
The string ripple current in tenths of amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.9.2.1.3 |
||||
|
battManStringChargerHighVoltageAlarm
mandatory
When set to alarm(2), indicates that the string charger has a high voltage alarm.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.9.2.1.4 |
||||
|
battManStringChargerLowVoltageAlarm
mandatory
When set to alarm(2), indicates that the string charger has a low voltage alarm.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.9.2.1.5 |
||||
|
battManStringCurrentProbeDisconnected
mandatory
When set to alarm(2), indicates that the string charger probe is disconnected.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.9.2.1.6 |
||||
|
battManStringOnBattery
mandatory
When set to alarm(2), indicates that the string is in the on-battery state.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.9.2.1.7 |
||||
|
battManStringHighRippleCurrent
mandatory
When set to alarm(2), indicates that the string has a high ripple current.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.9.2.1.8 |
||||
|
battManStringVoltage
mandatory
The sum of the voltages for all of the batteries on a
string in millivolts DC. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.9.2.1.9 |
||||
|
battManStringDischargeLess5Seconds
mandatory
The number of recorded discharges lasting less than
5 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.9.2.1.10 |
||||
|
battManStringDischarge5to10Seconds
mandatory
The number of recorded discharges lasting between 5
and 10 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.9.2.1.11 |
||||
|
battManStringDischarge10to60Seconds
mandatory
The number of recorded discharges lasting between 10
and 60 seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.9.2.1.12 |
||||
|
battManStringDischargeMore60Seconds
mandatory
The number of recorded discharges lasting more than
60 seconds (1 minute). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.9.2.1.13 |
.1.3.6.1.4.1.318.1.1.16.10.2
·
1 row entry
·
14 columns
Allows for getting information from each string in the system.
The string to get data from.
Indexes
battManString1BatteryIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
battManString1BatteryIndex
mandatory
Index of string entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.10.2.1.1 |
||||
|
battManString1BatteryVoltage
mandatory
The battery voltage in millivolts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.10.2.1.2 |
||||
|
battManString1BatteryLowestVoltage
mandatory
The lowest battery discharge voltage during the last power event in millivolts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.10.2.1.3 |
||||
|
battManString1BatteryCellShorted
mandatory
When set to alarm(2), indicates that a battery cell is shorted.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.4 |
||||
|
battManString1BatteryOpenFuseOrConnection
mandatory
When set to alarm(2), indicates that a fuse or connection is open.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.5 |
||||
|
battManString1BatteryLowCapacity
mandatory
When set to alarm(2), indicates a battery has low capacity.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.6 |
||||
|
battManString1BatteryHighOhmicValue
mandatory
When set to alarm(2), indicates a battery has a high ohmic value.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.7 |
||||
|
battManString1BatteryThermalRunaway
mandatory
When set to alarm(2), indicates a battery has a thermal runaway condition.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.8 |
||||
|
battManString1BatteryDryout
mandatory
When set to alarm(2), indicates a battery has a dryout condition.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.9 |
||||
|
battManString1BatteryUserHighVoltageAlarm
mandatory
When set to alarm(2), indicates a battery has violated
the user level high voltage limit. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.10 |
||||
|
battManString1BatteryUserLowVoltageAlarm
mandatory
When set to alarm(2), indicates a battery has violated
the user level low voltage limit. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.11 |
||||
|
battManString1BatteryChemHighVoltageAlarm
mandatory
When set to alarm(2), indicates a battery has violated
the chemistry level high voltage limit. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.12 |
||||
|
battManString1BatteryChemLowVoltageAlarm
mandatory
When set to alarm(2), indicates a battery has violated
the chemistry level low voltage limit. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.13 |
||||
|
battManString1BatteryOpenCell
mandatory
When set to alarm(2), indicates the battery has an open
cell or an inter-connection is abnormal. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.2.1.14 |
.1.3.6.1.4.1.318.1.1.16.10.4
·
1 row entry
·
14 columns
Allows for getting information from each string in the system.
The string to get data from.
Indexes
battManString2BatteryIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
battManString2BatteryIndex
mandatory
Index of string entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.10.4.1.1 |
||||
|
battManString2BatteryVoltage
mandatory
The battery voltage in millivolts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.10.4.1.2 |
||||
|
battManString2BatteryLowestVoltage
mandatory
The lowest battery discharge voltage during the last power event in millivolts DC.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.10.4.1.3 |
||||
|
battManString2BatteryCellShorted
mandatory
When set to alarm(2), indicates that a battery cell is shorted.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.4 |
||||
|
battManString2BatteryOpenFuseOrConnection
mandatory
When set to alarm(2), indicates that a fuse or connection is open.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.5 |
||||
|
battManString2BatteryLowCapacity
mandatory
When set to alarm(2), indicates a battery has low capacity.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.6 |
||||
|
battManString2BatteryHighOhmicValue
mandatory
When set to alarm(2), indicates a battery has a high ohmic value.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.7 |
||||
|
battManString2BatteryThermalRunaway
mandatory
When set to alarm(2), indicates a battery has a thermal runaway condition.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.8 |
||||
|
battManString2BatteryDryout
mandatory
When set to alarm(2), indicates a battery has a dryout condition.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.9 |
||||
|
battManString2BatteryUserHighVoltageAlarm
mandatory
When set to alarm(2), indicates a battery has violated
the user level high voltage limit. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.10 |
||||
|
battManString2BatteryUserLowVoltageAlarm
mandatory
When set to alarm(2), indicates a battery has violated
the user level low voltage limit. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.11 |
||||
|
battManString2BatteryChemHighVoltageAlarm
mandatory
When set to alarm(2), indicates a battery has violated
the chemistry level high voltage limit. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.12 |
||||
|
battManString2BatteryChemLowVoltageAlarm
mandatory
When set to alarm(2), indicates a battery has violated
the chemistry level low voltage limit. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.13 |
||||
|
battManString2BatteryOpenCell
mandatory
When set to alarm(2), indicates the battery has an open
cell or an inter-connection is abnormal. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.10.4.1.14 |
.1.3.6.1.4.1.318.1.1.16.11.2
·
1 row entry
·
6 columns
Allows for getting information from each contact in the system.
The contact to get data from.
Indexes
battManInputContactIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
battManInputContactIndex
mandatory
Index of contact entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.11.2.1.1 |
||||
|
battManInputContactName
mandatory
The name of the input contact.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.16.11.2.1.2 |
||||
|
battManInputContactAlarmState
mandatory
When set to alarm(2), indicates that the alarm condition is active for this contact.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.11.2.1.3 |
||||
|
battManInputContactState
mandatory
When set to open(1), the input contact is in the open state.
When set to closed(2), the input contact is in the closed state. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.11.2.1.4 |
||||
|
battManInputContactNormalState
mandatory
When set to open(1), the input contact is normally open.
When set to closed(2), the input contact is normally closed. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.11.2.1.5 |
||||
|
battManInputContactAlarmDelay
mandatory
The input contact alarm delay time in seconds.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.11.2.1.6 |
.1.3.6.1.4.1.318.1.1.16.13.3
·
1 row entry
·
2 columns
Allows for getting ohmic value information from each battery in String 1.
The string to get data from.
Indexes
battManString1OhmicValueIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString1OhmicValueIndex
mandatory
The battery number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.3.1.1 |
|
battManString1OhmicValueData
mandatory
The battery inter-tier ohmic value in tenths of milli-Ohms.
Note: Zero or negative values are invalid and may indicate faulty calibration of ohmic value correction factors. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.3.1.2 |
.1.3.6.1.4.1.318.1.1.16.13.5
·
1 row entry
·
2 columns
Allows for getting response test change information from each battery in String 1.
The string to get data from.
Indexes
battManString1ResponseTestChangeIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString1ResponseTestChangeIndex
mandatory
Index of the entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.5.1.1 |
|
battManString1ResponseTestChangeData
mandatory
The battery response test change in percent.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.5.1.2 |
.1.3.6.1.4.1.318.1.1.16.13.8
·
1 row entry
·
2 columns
Allows for getting ohmic value information from each battery in String 2.
The string to get data from.
Indexes
battManString2OhmicValueIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString2OhmicValueIndex
mandatory
Index of battery calibration entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.8.1.1 |
|
battManString2OhmicValueData
mandatory
The battery inter-tier ohmic value in ohms.
Note: Zero or negative values are invalid and may indicate faulty calibration of ohmic value correction factors. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.8.1.2 |
.1.3.6.1.4.1.318.1.1.16.13.10
·
1 row entry
·
2 columns
Allows for getting response test change information from each battery in String 2.
The string to get data from.
Indexes
battManString2ResponseTestChangeIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString2ResponseTestChangeIndex
mandatory
Index of the entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.10.1.1 |
|
battManString2ResponseTestChangeData
mandatory
The battery response test change in percent.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.10.1.2 |
.1.3.6.1.4.1.318.1.1.16.13.12
·
1 row entry
·
2 columns
Allows for getting response test current information from each battery in String 1.
The string to get data from.
Indexes
battManString1ResponseTestCurrentIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString1ResponseTestCurrentIndex
mandatory
Index of the entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.12.1.1 |
|
battManString1ResponseTestCurrentData
mandatory
The battery response test current in milliamps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.12.1.2 |
.1.3.6.1.4.1.318.1.1.16.13.14
·
1 row entry
·
2 columns
Allows for getting response test current information from each battery in String 2.
The string to get data from.
Indexes
battManString2ResponseTestCurrentIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString2ResponseTestCurrentIndex
mandatory
Index of the entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.14.1.1 |
|
battManString2ResponseTestCurrentData
mandatory
The battery response test current in milliamps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.14.1.2 |
.1.3.6.1.4.1.318.1.1.16.13.16
·
1 row entry
·
2 columns
Allows for getting response test current benchmark information from each battery in String 1.
The string to get data from.
Indexes
battManString1ResponseTestCurrentBenchmarkIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString1ResponseTestCurrentBenchmarkIndex
mandatory
Index of the entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.16.1.1 |
|
battManString1ResponseTestCurrentBenchmarkData
mandatory
The battery response test current benchmark in milliamps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.16.1.2 |
.1.3.6.1.4.1.318.1.1.16.13.18
·
1 row entry
·
2 columns
Allows for getting response test current benchmark information from each battery in String 2.
The string to get data from.
Indexes
battManString2ResponseTestCurrentBenchmarkIndex
| Column | Syntax | OID |
|---|---|---|
|
battManString2ResponseTestCurrentBenchmarkIndex
mandatory
Index of the entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.18.1.1 |
|
battManString2ResponseTestCurrentBenchmarkData
mandatory
The battery response test current benchmark in milliamps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.13.18.1.2 |
.1.3.6.1.4.1.318.1.1.16.14.2
·
1 row entry
·
6 columns
Allows for getting status information from each unit in the system.
The unit to get data from.
Indexes
battManUnitStatusIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
battManUnitStatusIndex
mandatory
Index of unit status entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.14.2.1.1 |
||||
|
battManUnitStatusSerialNumber
mandatory
The battery manager unit serial number character string.
This value is set at the factory. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.16.14.2.1.2 |
||||
|
battManUnitHardwareRev
mandatory
The battery manager unit hardware revision.
This value is set at the factory. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.14.2.1.3 |
||||
|
battManUnitFirmwareRev
mandatory
The battery manager unit firmware revision.
This value is set at the factory and can change with firmware update. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.16.14.2.1.4 |
||||
|
battManUnitCommLoss
mandatory
When set to alarm(2), indicates the system has lost
communication with the unit. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.14.2.1.5 |
||||
|
battManUnitRelayStuck
mandatory
When set to alarm(2), indicates the unit monitor relay
is stuck. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.16.14.2.1.6 |
.1.3.6.1.4.1.318.1.1.17.3.3.2
·
1 row entry
·
6 columns
A list of timers supported by ATS. The number of entries is contained in the xATSSwitchTimersTableSize OID.
An entry containing information about an individual ATS timer.
Indexes
xATSSwitchTimersIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
xATSSwitchTimersIndex
mandatory
Index of timer entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.3.3.2.1.1 |
||||
|
xATSSwitchTimersName
mandatory
Name of the individual timer.Refer to ATS operation manual,
or on-line help, for detailed descriptions of ATS timers. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.17.3.3.2.1.2 |
||||
|
xATSSwitchTimersAbort
mandatory
This aborts the individual timer.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.3.3.2.1.3 |
||||
|
xATSSwitchTimersStatus
mandatory
The status of the individual timer. Designates whether this timer
entry is currently running or inactive. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.3.3.2.1.4 |
||||
|
xATSSwitchTimersRemainingTime
mandatory
The time remaining for this timer entry.
Specified in seconds. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.3.3.2.1.5 |
||||
|
xATSSwitchTimersDelaySetting
mandatory
The delay settings associated with this timer entry.
When this timer entry is active, the timer value must exceed this setting before the ATS behavior associated with this timer is executed. Refer to ATS operation manua… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.3.3.2.1.6 |
.1.3.6.1.4.1.318.1.1.17.3.4.2
·
1 row entry
·
4 columns
A list of blocking maps supported by the ATS. The number of entries is contained in the xATSSwitchBlockMapTableSize OID.
An entry containing information about a specific ATS blocking map.
Indexes
xATSSwitchBlockMapIndex
| Column | Syntax | OID |
|---|---|---|
|
xATSSwitchBlockMapIndex
mandatory
Index of blocking map entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.3.4.2.1.1 |
|
xATSSwitchBlockMapName
mandatory
A string describing the ATS action to be blocked.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.17.3.4.2.1.2 |
|
xATSSwitchBlockMapStatus
mandatory
Represents the status of this blocking map entry, in bit-mapped format.
A non-zero value indicates that this entry's ATS action is currently being blocked. The bit(s) set indicate which input(s) are causing the blocking… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.3.4.2.1.3 |
|
xATSSwitchBlockMapSetting
mandatory
This setting designates the inputs that block the ATS action
The mapping is specified as a bit-field, where each bit set indicates the input that blocks the ATS action associated with the entry. bit 0 - C… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.3.4.2.1.4 |
.1.3.6.1.4.1.318.1.1.17.3.5.2
·
1 row entry
·
4 columns
A list of statistics supported by ATS. The number of entries is contained in the xATSSwitchStatisticsTableSize OID.
An entry containing information about an individual ATS statistic.
Indexes
xATSSwitchStatisticsIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
xATSSwitchStatisticsIndex
mandatory
Index of ATS statistics entries in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.3.5.2.1.1 |
||||
|
xATSSwitchStatisticsName
mandatory
This is the name of the ATS statistic associated with this entry.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.17.3.5.2.1.2 |
||||
|
xATSSwitchStatisticsValue
mandatory
This is the value of the ATS statistic associated with this entry.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.17.3.5.2.1.3 |
||||
|
xATSSwitchStatisticsReset
mandatory
This will reset the individual ATS statistic associated with this entry.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.3.5.2.1.4 |
.1.3.6.1.4.1.318.1.1.17.4.1.7
·
1 row entry
·
3 columns
A list of voltage table entries for source 1. The number of entries are the phase entries. The number of entries is contained in the xATSSource1TableSize OID.
An entry containing information applicable to a
particular input voltage phase at the source 1 input of the ATS.
particular input voltage phase at the source 1 input of the ATS.
Indexes
xATSSource1Index
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xATSSource1Index
mandatory
Description of each phase utilized at source 1.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.4.1.7.1.1 |
||||||
|
xATSSource1VoltageLtoL
mandatory
Source 1 line-to-line input voltage.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.1.7.1.2 |
||||||
|
xATSSource1VoltageLtoN
mandatory
Source 1 line-to-neutral input voltage.
Measured in tenths of Volts. -1 for a 3-wire service type. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.1.7.1.3 |
.1.3.6.1.4.1.318.1.1.17.4.2.7
·
1 row entry
·
3 columns
A list of voltage table entries for the source 2. The number of entries are the phase entries. The number of entries is contained in the xATSSource2TableSize OID.
An entry containing information applicable to a
particular input voltage phase at the source 2 input of the ATS.
particular input voltage phase at the source 2 input of the ATS.
Indexes
xATSSource2Index
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xATSSource2Index
mandatory
Description of each phase utilized at the source 2.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.4.2.7.1.1 |
||||||
|
xATSSource2VoltageLtoL
mandatory
Source 2 line-to-line input voltage.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.2.7.1.2 |
||||||
|
xATSSource2VoltageLtoN
mandatory
Source 2 line-to-neutral input voltage.
Measured in tenths of Volts. -1 for a 3-wire service type. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.2.7.1.3 |
.1.3.6.1.4.1.318.1.1.17.4.3.12
·
1 row entry
·
7 columns
A list of system output table entries. The number of entries is contained in the xATSSystemOutputTableSize OID.
An entry containing information applicable to a
particular system output phase.
particular system output phase.
Indexes
xATSSystemOutputPhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xATSSystemOutputPhaseIndex
mandatory
Description of each system output phase utilized in this device.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.4.3.12.1.1 |
||||||
|
xATSSystemOutputVoltageLtoL
mandatory
Line-to-line system output voltage available at the circuit panel.
Measured in tenths of Volts. -1 if not available. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.3.12.1.2 |
||||||
|
xATSSystemOutputVoltageLtoN
mandatory
Line-to-neutral system output voltage available at the circuit panel.
Measured in tenths of Volts. -1 for a 3-wire service type or if not available. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.3.12.1.3 |
||||||
|
xATSSystemOutputPhaseCurrent
mandatory
System load current per phase. Measured in Amps.
-1 if not available. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.3.12.1.4 |
||||||
|
xATSSystemOutputPower
mandatory
System output power per phase. Measured in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.3.12.1.5 |
||||||
|
xATSSystemOutputApparentPower
mandatory
system output power per phase. Measured in tenths of kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.3.12.1.6 |
||||||
|
xATSSystemOutputPowerFactor
mandatory
indicates the power factor of the system output per phase.
A value of 100 representing a unity power factor (1.00). Measured in hundredths. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.4.3.12.1.7 |
.1.3.6.1.4.1.318.1.1.17.6.3
·
1 row entry
·
4 columns
A list of contacts supported by the ATS. The number of entries is contained in the xATSInputContactTableSize OID.
A contact entry containing information for a given contact.
Indexes
xATSInputContactNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
xATSInputContactNumber
mandatory
An index identifying the contact on the ATS.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.6.3.1.1 |
||||
|
xATSInputContactName
mandatory
The description of the purpose/use of the contact.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.17.6.3.1.2 |
||||
|
xATSInputContactNormalState
mandatory
The normal operating position of the contact.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.6.3.1.3 |
||||
|
xATSInputContactCurrentState
mandatory
This value indicates the current state of the contact.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.6.3.1.4 |
.1.3.6.1.4.1.318.1.1.17.7.3
·
1 row entry
·
4 columns
A list of output relays supported by the ATS. The number of entries is contained in the xATSOutputRelayTableSize OID.
A output relay entry containing information for a given contact.
Indexes
xATSOutputRelayNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
xATSOutputRelayNumber
mandatory
An index identifying the output relay on the ATS.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.17.7.3.1.1 |
||||
|
xATSOutputRelayName
mandatory
The description of the purpose/use of the output relay.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.17.7.3.1.2 |
||||
|
xATSOutputRelayNormalState
mandatory
The normal operating position of the output relay.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.7.3.1.3 |
||||
|
xATSOutputRelayCurrentState
mandatory
This value indicates the current state of the output relay.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.17.7.3.1.4 |
.1.3.6.1.4.1.318.1.1.18.1.4.6
·
1 row entry
·
7 columns
A list of generator output table entries. The number of entries is contained in the xATSGeneratorOutputTableSize OID.
An entry containing information applicable to a
particular generator output phase.
particular generator output phase.
Indexes
xATSGeneratorOutputPhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
xATSGeneratorOutputPhaseIndex
mandatory
Description of each generator output phase utilized in this device.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.18.1.4.6.1.1 |
||||||
|
xATSGeneratorOutputVoltageLtoL
mandatory
Line-to-line generator output voltage.
Measured in Volts, or -1 if not available. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.18.1.4.6.1.2 |
||||||
|
xATSGeneratorOutputVoltageLtoN
mandatory
Line-to-neutral generator output voltage.
Measured in volts, or -1 if not available. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.18.1.4.6.1.3 |
||||||
|
xATSGeneratorOutputPhaseCurrent
mandatory
Generator load current per phase.
Measured in Amps, or -1 if not available. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.18.1.4.6.1.4 |
||||||
|
xATSGeneratorOutputPower
mandatory
Generator output power per phase.
Measured in tenths of kW, or -1 if not available. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.18.1.4.6.1.5 |
||||||
|
xATSGeneratorOutputApparentPower
mandatory
Generator output power per phase.
Measured in tenths of kVA, or -1 if not available. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.18.1.4.6.1.6 |
||||||
|
xATSGeneratorOutputPowerFactor
mandatory
Indicates the load power factor of the generator output per phase.
A value of 100 representing a unity power factor (1.00), or -1 if not available. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.18.1.4.6.1.7 |
.1.3.6.1.4.1.318.1.1.19.1.1.4.2
·
1 row entry
·
5 columns
A table of PCMCIA card identifications.
Identification information for a PCMCIA card.
Indexes
cpsCardIdentIndex
| Column | Syntax | OID |
|---|---|---|
|
cpsCardIdentIndex
mandatory
Number to identify the socket Card.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.1.4.2.1.1 |
|
cpsCardIdentProd
mandatory
Product identification string.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.2.1.2 |
|
cpsCardIdentMan
mandatory
Manufacturer ID code.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.2.1.3 |
|
cpsCardIdentFunc
mandatory
Function ID code.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.2.1.4 |
|
cpsCardIdentPCI
mandatory
PCI ID
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.2.1.5 |
.1.3.6.1.4.1.318.1.1.19.1.1.4.3
·
1 row entry
·
8 columns
A table of socket configuration information.
Configuration information for a socket.
Indexes
cpsCardConfIndex
| Column | Syntax | OID |
|---|---|---|
|
cpsCardConfIndex
mandatory
Number to identify the socket PCMCIA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.1.4.3.1.1 |
|
cpsCardConfPower
mandatory
Power Settings.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.3.1.2 |
|
cpsCardConfType
mandatory
Interface Type.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.3.1.3 |
|
cpsCardConfInter
mandatory
Interrupt number.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.3.1.4 |
|
cpsCardConfFunc
mandatory
Function.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.3.1.5 |
|
cpsCardConfCardv
mandatory
Card values.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.3.1.6 |
|
cpsCardConfPort1
mandatory
I/O Port 1.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.3.1.7 |
|
cpsCardConfPort2
mandatory
I/O Port 2.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.3.1.8 |
.1.3.6.1.4.1.318.1.1.19.1.1.4.4
·
1 row entry
·
3 columns
A table of current socket status information.
Current status information for a socket.
Indexes
cpsCardStatusIndex
| Column | Syntax | OID |
|---|---|---|
|
cpsCardStatusIndex
mandatory
Number to identify the socket PCMCIA.
|
Integer32 Constraints: range: 0-2 |
.1.3.6.1.4.1.318.1.1.19.1.1.4.4.1.1 |
|
cpsCardStatusCard
mandatory
Current Card State.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.4.1.2 |
|
cpsCardStatusFunc
mandatory
Current Function.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.1.4.4.1.3 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.1.11
·
1 row entry
·
3 columns
Indexes
cpsSerialGroupIndex
| Column | Syntax | OID |
|---|---|---|
|
cpsSerialGroupIndex
mandatory
Number to identify the group.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.1.11.1.1 |
|
cpsSerialGroupName
mandatory
The group name.
|
OctetStringr/w Constraints: range: 0-20 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.1.11.1.2 |
|
cpsSerialGroupUsers
mandatory
The user's names.
|
OctetStringr/w Constraints: range: 0-80 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.1.11.1.3 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1
·
1 row entry
·
58 columns
This is the specific configuration per serial port.
One particular serial port configuration.
Indexes
cpsSerialPortNumber
| Column | Syntax | OID |
|---|---|---|
|
cpsSerialPortNumber
mandatory
Number to identify the serial port. Value 0 is ALL.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.1 |
|
cpsSerialPortTty
mandatory
The device name for the serial port.
|
OctetStringr/w Constraints: range: 0-25 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.2 |
|
cpsSerialPortName
mandatory
Alias name given to the server connected to the serial port.
|
OctetStringr/w Constraints: range: 0-40 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.3 |
|
cpsSerialPortSpeed
mandatory
The speed of the serial port.
Supported values are: 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, and 460800 |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.4 |
|
cpsSerialPortDataSize
mandatory
The data size for the serial port.
|
Integer32r/w Constraints: range: 4-8 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.5 |
|
cpsSerialPortStopBits
mandatory
The number of stop bits for the serial port.
|
Integer32r/w Constraints: range: 0-2 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.6 |
|
cpsSerialPortParity
mandatory
The parity for the serial port.
|
OctetStringr/w Constraints: range: 0-5 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.7 |
|
cpsSerialPortFlowCtrl
mandatory
The flow control for the serial port.
|
OctetStringr/w Constraints: range: 0-5 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.8 |
|
cpsSerialPortDTRdelay
mandatory
This specifies how long (in milliseconds) a DTR signal
will be turned off before it is turned on again. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.9 |
|
cpsSerialPortDCDCtrl
mandatory
DCD signal controls the connection request.
0 will indicate nocontrol, 1 will indicate control. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.10 |
|
cpsSerialPortLogUtmp
mandatory
Update the login records in /var/run/utmp file.
0 will indicate inactive, 1 will indicate active. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.11 |
|
cpsSerialPortLogWtmp
mandatory
Update the login records in /var/run/wtmp file.
0 will indicate inactive, 1 will indicate active. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.12 |
|
cpsSerialPortLogform
mandatory
This is the format to write the login record.
|
OctetStringr/w Constraints: range: 0-40 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.13 |
|
cpsSerialPortAuthtype
mandatory
Authentication type.
|
OctetStringr/w Constraints: range: 0-25 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.14 |
|
cpsSerialPortAuthSrv1
mandatory
IP address of the primary authentication server.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.15 |
|
cpsSerialPortAccSrv1
mandatory
IP address of the primary accounting server.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.16 |
|
cpsSerialPortAuthTmo
mandatory
This is the timeout (in seconds) for the authentication
query to be answered. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.17 |
|
cpsSerialPortAuthRetr
mandatory
This defines the number of times each server is tried
before another is contacted. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.18 |
|
cpsSerialPortAuthSrv2
mandatory
IP address of the secondary authentication server.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.19 |
|
cpsSerialPortAccSrv2
mandatory
IP address of the secondary accounting server.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.20 |
|
cpsSerialPortAuthSecret
mandatory
This is the shared secret with authentication servers.
|
OctetStringr/w Constraints: range: 0-40 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.21 |
|
cpsSerialPortAuthRadP
mandatory
Radius state.
0 will indicate inactive, 1 will indicate active. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.22 |
|
cpsSerialPortAuthAcc
mandatory
Access restriction.
|
OctetStringr/w Constraints: range: 0-40 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.23 |
|
cpsSerialPortProtocol
mandatory
Defines the serial port's protocol.
|
OctetStringr/w Constraints: range: 0-40 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.24 |
|
cpsSerialPortRemoteIP
mandatory
This is the default IP address of the serial port.
|
OctetStringr/w Constraints: range: 0-20 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.25 |
|
cpsSerialPortSocketPort
mandatory
This defines an alternative labeling system for the serial port.
|
OctetStringr/w Constraints: range: 0-10 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.26 |
|
cpsSerialPortRemHost
mandatory
The IP address of the host to which the serial port will connect.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.27 |
|
cpsSerialPortBanner
mandatory
This defines the banner.
|
OctetStringr/w Constraints: range: 0-250 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.28 |
|
cpsSerialPortPrompt
mandatory
This defines the login prompt to the serial port.
|
OctetStringr/w Constraints: range: 0-250 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.29 |
|
cpsSerialPortTermType
mandatory
This defines the terminal type.
|
OctetStringr/w Constraints: range: 0-20 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.30 |
|
cpsSerialPortAutomUsr
mandatory
This defines the automatic user.
|
OctetStringr/w Constraints: range: 0-40 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.31 |
|
cpsSerialPortNetMask
mandatory
The network mask used in dial in connection.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.32 |
|
cpsSerialPortPppMtu
mandatory
The PPP MTU - dial in connection.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.33 |
|
cpsSerialPortPppMru
mandatory
The PPP MRU - dial in connection.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.34 |
|
cpsSerialPortPppOptions
mandatory
The PPP options when the PPP session is autodetected.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.35 |
|
cpsSerialPortPppFoption
mandatory
The PPP forced options when the user has already been authenticated.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.36 |
|
cpsSerialPortModemChat
mandatory
The initchat send to modem connected.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.37 |
|
cpsSerialPortSttyCmd
mandatory
The tty settings after socket connection is established.
|
OctetStringr/w Constraints: range: 0-180 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.38 |
|
cpsSerialPortSockTx
mandatory
Defines the delay (in milliseconds) before transmission to
the Ethernet of data received through a serial port. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.39 |
|
cpsSerialPortSockPoll
mandatory
Keep-alive timer (milliseconds) for the TCP connection.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.40 |
|
cpsSerialPortSockIdle
mandatory
The idle timeout in seconds.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.41 |
|
cpsSerialPortDBsize
mandatory
Maximum size of the data buffering file.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.42 |
|
cpsSerialPortDBtime
mandatory
Timestamp in data buffering.
0 will indicate inactive, 1 will indicate active. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.43 |
|
cpsSerialPortDBmode
mandatory
Data buffering mode : circ or line.
|
OctetStringr/w Constraints: range: 0-5 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.44 |
|
cpsSerialPortDBsyslog
mandatory
Size of the data buffer sent to syslog.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.45 |
|
cpsSerialPortDBmenu
mandatory
Menu type for data buffering.
0 will indicate display Menu, 1 will indicate inactive, 2 will indicate DB, 3 will indicate Parc. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.46 |
|
cpsSerialPortDBalarm
mandatory
Alarm generation status.
0 will indicate inactive, 1 will indicate active. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.47 |
|
cpsSerialPortSSHbreak
mandatory
Break sequence - ssh session.
|
OctetStringr/w Constraints: range: 0-16 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.48 |
|
cpsSerialPortSniffSess
mandatory
Sniff session type.
|
OctetStringr/w Constraints: range: 0-5 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.49 |
|
cpsSerialPortSniffAdm
mandatory
List of admin users allowed to sniff session.
|
OctetStringr/w Constraints: range: 0-40 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.50 |
|
cpsSerialPortSniffEsc
mandatory
Escape sequence used in sniff session.
|
OctetStringr/w Constraints: range: 0-6 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.51 |
| cpsSerialPortSniffMsess mandatory | OctetStringr/w Constraints: range: 0-20 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.52 |
|
cpsSerialPortTelnetMode
mandatory
Mode negotiated by client telnet with the server.
0 will indicate text, 1 will indicate binary. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.53 |
|
cpsSerialPortSysBufSess
mandatory
Syslog Buffering at all times.
0 will indicate yes, 1 will indicate no. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.54 |
|
cpsSerialPortLFSuppress
mandatory
LF suppression in socket_server session.
0 will indicate inactive, 1 will indicate active. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.55 |
|
cpsSerialPortAutoInput
mandatory
Input string used for auto answer.
|
OctetStringr/w Constraints: range: 0-40 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.56 |
|
cpsSerialPortAutoOutput
mandatory
Output string used for auto answer.
|
OctetStringr/w Constraints: range: 0-40 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.57 |
|
cpsSerialPortBreakInterval
mandatory
The break interval in milliseconds.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.2.6.2.1.1.58 |
.1.3.6.1.4.1.318.1.1.19.1.3.1
·
1 row entry
·
16 columns
This is the information of the specific serial port.
One particular serial port.
Indexes
cpsInfoSerialPortNumber
| Column | Syntax | OID |
|---|---|---|
|
cpsInfoSerialPortNumber
mandatory
Number to identify the serial port.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.1 |
|
cpsInfoSerialPortTty
mandatory
The device name for the serial port.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.2 |
|
cpsInfoSerialPortName
mandatory
Alias name given to the server connected to the serial port.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.3 |
|
cpsInfoSerialPortSpeed
mandatory
The speed for serial port.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.4 |
|
cpsInfoSerialPortTxBytes
mandatory
The number of transmitted bytes by the serial port.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.5 |
|
cpsInfoSerialPortRXBytes
mandatory
The number of received bytes by the serial port.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.6 |
|
cpsInfoSerialPortErrFrame
mandatory
The number of frame errors.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.7 |
|
cpsInfoSerialPortErrParity
mandatory
The number of parity errors.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.8 |
|
cpsInfoSerialPortErrBreaks
mandatory
The number of breaks errors.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.9 |
|
cpsInfoSerialPortErrOverrun
mandatory
The number of overrun errors.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.10 |
|
cpsInfoSerialPortSigDTR
mandatory
The state of the DTR signal.
0 will indicate down, 1 will indicate up. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.11 |
|
cpsInfoSerialPortSigCD
mandatory
The state of the DCD signal.
0 will indicate down, 1 will indicate up. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.12 |
|
cpsInfoSerialPortSigDSR
mandatory
The state of the DSR signal.
0 will indicate down, 1 will indicate up. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.13 |
|
cpsInfoSerialPortSigRTS
mandatory
The state of the RTS signal.
0 will indicate down, 1 will indicate up. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.14 |
|
cpsInfoSerialPortSigCTS
mandatory
The state of the CTS signal.
0 will indicate down, 1 will indicate up. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.15 |
|
cpsInfoSerialPortSigRI
mandatory
The state of the RI signal.
0 will indicate down, 1 will indicate up. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.19.1.3.1.1.16 |
.1.3.6.1.4.1.318.1.1.22.1.2
·
1 row entry
·
6 columns
Allows for getting information about the modular distribution metering equipment.
An entry containing information about an individual metering segment.
Indexes
isxModularDistInfoSegmentIndex
| Column | Syntax | OID |
|---|---|---|
|
isxModularDistInfoSegmentIndex
mandatory
The index of the metering segment.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.1.2.1.1 |
|
isxModularDistInfoMeterModelNumber
mandatory
The model number of the metering board for this segment.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.1.2.1.2 |
|
isxModularDistInfoMeterSerialNumber
mandatory
The serial number of the metering board for this segment.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.1.2.1.3 |
|
isxModularDistInfoMeterDateOfManufacture
mandatory
The date of manufacture for the metering board for this segment,
in the format mm/dd/yyyy. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.1.2.1.4 |
|
isxModularDistInfoMeterFirmwareRev
mandatory
The firmware revision number of the metering board for this segment.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.1.2.1.5 |
|
isxModularDistInfoMeterHardwareRev
mandatory
The hardware revision number of the metering board for this segment.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.1.2.1.6 |
.1.3.6.1.4.1.318.1.1.22.2.2
·
1 row entry
·
6 columns
Allows for getting basic information about the distribution modules installed in the system.
An entry containing information about a specific distribution module.
Indexes
isxModularDistModuleInfoModIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
isxModularDistModuleInfoModIndex
mandatory
The number of the distribution module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.2.1.1 |
||||||||||
|
isxModularDistModuleInfoAlarmStatus
mandatory
The status of this module. This reflects the indicator lamp(s) on the front of the module.
A value of notPresent indicates that the module is not installed. A value of unknown indicates that there is no communication wi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.2.1.2 |
||||||||||
|
isxModularDistModuleInfoModelNumber
mandatory
The model number of the distribution module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.2.2.1.3 |
||||||||||
|
isxModularDistModuleInfoSerialNumber
mandatory
The serial number of the distribution module.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.2.2.1.4 |
||||||||||
|
isxModularDistModuleInfoDateOfManufacture
mandatory
The date that the distribution module was manufactured.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.2.2.1.5 |
||||||||||
|
isxModularDistModuleInfoNumCables
mandatory
The number of cables provided by this distribution module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.2.1.6 |
.1.3.6.1.4.1.318.1.1.22.2.4
·
1 row entry
·
11 columns
Allows for getting operational information about the distribution modules.
An entry containing information about a specific distribution modules and circuit breakers.
Indexes
isxModularDistModuleBreakerModIndex isxModularDistModuleBreakerPhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
isxModularDistModuleBreakerModIndex
mandatory
The distribution module number.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.4.1.1 |
||||||
|
isxModularDistModuleBreakerPhaseIndex
mandatory
The index to an individual breaker in the distribution module. The index also corresponds
to the system phase to which the breaker is attached. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.4.1.2 |
||||||
|
isxModularDistModuleBreakerAlarmStatus
mandatory
This is a bit map representing the active alarms for this breaker:
b0 - Minimum current threshold exceeded (critical) b1 - Low current threshold exceeded (warning) b2 - High current threshold exceeded (wa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.4.1.3 |
||||||
|
isxModularDistModuleBreakerRating
mandatory
The current rating of the breaker.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.4.1.4 |
||||||
|
isxModularDistModuleBreakerPhysicalGroup
mandatory
Numeric value used to indicate that a breaker is a part of a multi-pole breaker.
Breakers within a distribution module, with equivalent physical group numbers, may have their handles physically tied together. A value of… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.4.1.5 |
||||||
|
isxModularDistModuleBreakerCableNum
mandatory
Numeric value used to indicate the distribution cable to which
this breaker is connected. These distribution cables are described in the table isxModularDistModuleOutputTable, and indexed by the OID isxModularDistModule… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.4.1.6 |
||||||
|
isxModularDistModuleBreakerPosition
mandatory
The physical status of this breaker pole, either closed or open (including tripped).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.4.1.7 |
||||||
|
isxModularDistModuleBreakerPositionAlarms
mandatory
Enable or disable breaker position alarms for this circuit breaker.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.4.1.8 |
||||||
|
isxModularDistModuleBreakerCurrent
mandatory
The current flowing though this breaker. Measured in tenths of amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.4.1.9 |
||||||
|
isxModularDistModuleBreakerPercent
mandatory
The loading on this breaker as a percentage of the breaker's current rating.
Expressed in tenths of percent. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.4.1.10 |
||||||
|
isxModularDistModuleBreakerPower
mandatory
The power being supplied through this breaker. Measured in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.4.1.11 |
.1.3.6.1.4.1.318.1.1.22.2.6
·
1 row entry
·
23 columns
Allows for getting and setting information related to the load equipment being fed by the distribution modules in the ISX Modular Distribution System.
An entry containing information about a specific distribution module
and its output distribution cables.
and its output distribution cables.
Indexes
isxModularDistModuleOutputModIndex isxModularDistModuleOutputCordIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
isxModularDistModuleOutputModIndex
mandatory
The number of the distribution module supplying power to the load equipment.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.1 |
||||||||||
|
isxModularDistModuleOutputNumCables
mandatory
The number of distribution cables provided by this module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.2 |
||||||||||
|
isxModularDistModuleOutputCordIndex
mandatory
The index of an individual distribution cable supplied by this module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.3 |
||||||||||
|
isxModularDistModuleOutputName
mandatory
A string describing the load equipment being supplied by this distribution cable.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.2.6.1.4 |
||||||||||
|
isxModularDistModuleOutputLocation
mandatory
A string describing the location of equipment being supplied by distribution cable.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.2.6.1.5 |
||||||||||
|
isxModularDistModuleOutputStatus
mandatory
This reflects the worse case severity for alarms associated with this distribution cable.
A value of notPresent indicates that the cable does not exist for this module. A value of unknown indicates that the there is no … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.6.1.6 |
||||||||||
|
isxModularDistModuleOutputAlarmGeneration
mandatory
Enable or disable all alarm generation related to this distribution cable.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.6.1.7 |
||||||||||
|
isxModularDistModuleOutputBreakerMap
mandatory
This is a bit map representing the breaker poles within the
module that are associated with this distribution cable. The following 3 bits are used to indicate the indices of the breakers feeding the cable: … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.8 |
||||||||||
|
isxModularDistModuleOutputThresholdMin
mandatory
When the current drops below this value a critical alarm will exist.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.9 |
||||||||||
|
isxModularDistModuleOutputThresholdLow
mandatory
When the current drops below this value a warning alarm will exist.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.10 |
||||||||||
|
isxModularDistModuleOutputThresholdHigh
mandatory
When the current exceeds this value a warning alarm will exist.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.11 |
||||||||||
|
isxModularDistModuleOutputThresholdMax
mandatory
When the current exceeds this value a critical alarm will exist.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.12 |
||||||||||
|
isxModularDistModuleOutputAlarmMinEnable
mandatory
Enable or disable minimum current alarm generation for this distribution cable.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.6.1.13 |
||||||||||
|
isxModularDistModuleOutputAlarmLowEnable
mandatory
Enable or disable low current alarm generation for this distribution cable.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.6.1.14 |
||||||||||
|
isxModularDistModuleOutputAlarmHighEnable
mandatory
Enable or disable high current alarm generation for this distribution cable.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.6.1.15 |
||||||||||
|
isxModularDistModuleOutputAlarmMaxEnable
mandatory
Enable or disable maximum current alarm generation for this distribution cable.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.6.1.16 |
||||||||||
|
isxModularDistModuleOutputCableLength
mandatory
The length of this distribution cable. Specified in tenths of meters.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.17 |
||||||||||
|
isxModularDistModuleOutputConnectorType
mandatory
A string describing the connector on the end of this distribution cable.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.2.6.1.18 |
||||||||||
|
isxModularDistModuleOutputAvailableVoltages
mandatory
This is a bit map representing the voltages that are available at the connector.
6 bits are used to indicate the following: b0 - L1 b1 - L2 b2 - L3 b3 - L1-2 b4 - L2-3 b5 - L3-1 |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.19 |
||||||||||
|
isxModularDistModuleOutputTotalPower
mandatory
The total power being consumed by the load equipment supplied by this distribution cable.
Measured in tenths of kW. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.20 |
||||||||||
|
isxModularDistModuleOutputKwhUsage
mandatory
The total energy consumed by the load equipment fed by this distribution cable.
This is the total since the date specified in the isxModularDistModuleOutputKwhResetDate OID, and may be cleared using the isxModularDistMo… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.2.6.1.21 |
||||||||||
|
isxModularDistModuleOutputKwhReset
mandatory
Writing yes to this OID will reset the total kWh usage shown
in the isxModularDistModuleOutputKwhUsage OID. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.2.6.1.22 |
||||||||||
|
isxModularDistModuleOutputKwhResetDate
mandatory
The date that the kWh usage was reset, in the format mm/dd/yyyy. Example: 01/01/2000.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.2.6.1.23 |
.1.3.6.1.4.1.318.1.1.22.3.2
·
1 row entry
·
20 columns
Allows for getting information about distribution subfeed breakers.
An entry containing information about a specific distribution subfeed.
Indexes
isxModularDistSubFeedInfoSubIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
isxModularDistSubFeedInfoSubIndex
mandatory
The index of an individual subfeed.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.2.1.1 |
||||||
|
isxModularDistSubFeedInfoName
mandatory
A string describing the load equipment being supplied by this subfeed.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.3.2.1.2 |
||||||
|
isxModularDistSubFeedInfoLocation
mandatory
A string describing the location of the equipment being supplied by this subfeed.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.3.2.1.3 |
||||||
|
isxModularDistSubFeedInfoBreakerRating
mandatory
The current rating of this subfeed breaker.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.2.1.4 |
||||||
|
isxModularDistSubFeedInfoBreakerPosition
mandatory
The operational status of this breaker, either closed or open (including tripped).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.2.1.5 |
||||||
|
isxModularDistSubFeedInfoAlarmStatus
mandatory
The worst case alarm status for this subfeed.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.2.1.6 |
||||||
|
isxModularDistSubFeedInfoAlarmGeneration
mandatory
Enable or disable all alarm generation related to this subfeed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.2.1.7 |
||||||
|
isxModularDistSubFeedInfoThresholdMin
mandatory
When the current drops below this value a critical alarm will exist.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.2.1.8 |
||||||
|
isxModularDistSubFeedInfoThresholdLow
mandatory
When the current drops below this value a warning alarm will exist.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.2.1.9 |
||||||
|
isxModularDistSubFeedInfoThresholdHigh
mandatory
When the current exceeds this value a warning alarm will exist.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.2.1.10 |
||||||
|
isxModularDistSubFeedInfoThresholdMax
mandatory
When the current exceeds this value a critical alarm will exist.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.2.1.11 |
||||||
|
isxModularDistSubFeedInfoAlarmMinEnable
mandatory
Enable or disable minimum current alarm generation for this subfeed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.2.1.12 |
||||||
|
isxModularDistSubFeedInfoAlarmLowEnable
mandatory
Enable or disable low current alarm generation for this subfeed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.2.1.13 |
||||||
|
isxModularDistSubFeedInfoAlarmHighEnable
mandatory
Enable or disable high current alarm generation for this subfeed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.2.1.14 |
||||||
|
isxModularDistSubFeedInfoAlarmMaxEnable
mandatory
Enable or disable maximum current alarm generation for this subfeed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.2.1.15 |
||||||
|
isxModularDistSubFeedInfoBreakerAlarmEnable
mandatory
Enable or disable breaker position alarms for this subfeed.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.2.1.16 |
||||||
|
isxModularDistSubFeedInfoTotalPower
mandatory
The total power being supplied by this subfeed. Measured in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.2.1.17 |
||||||
|
isxModularDistSubFeedInfoKwhUsage
mandatory
The total energy consumed by the load equipment fed by this subfeed.
This is the total since the date specified in the isxModularDistSubFeedInfoKwhResetDate OID, and may be cleared using the isxModularDistSubFeedInfoKwh… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.2.1.18 |
||||||
|
isxModularDistSubFeedInfoKwhReset
mandatory
Writing yes to this OID will reset the total kWh usage shown
in the isxModularDistSubFeedInfoKwhUsage OID. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.2.1.19 |
||||||
|
isxModularDistSubFeedInfoKwhResetDate
mandatory
The date that the kWh usage was reset, in the format mm/dd/yyyy. Example: 01/01/2000.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.22.3.2.1.20 |
.1.3.6.1.4.1.318.1.1.22.3.4
·
1 row entry
·
6 columns
Allows for getting subfeed phase loading information.
An entry containing data for an individual subfeed.
Indexes
isxModularDistSubFeedLoadingSubIndex isxModularDistSubFeedLoadingPhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
isxModularDistSubFeedLoadingSubIndex
mandatory
The index of an individual subfeed.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.4.1.1 |
||||||
|
isxModularDistSubFeedLoadingPhaseIndex
mandatory
Description of each input phase entry in the table.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.3.4.1.2 |
||||||
|
isxModularDistSubFeedLoadingAlarmStatus
mandatory
This is a bit map representing the active alarms for this subfeed:
b0 - Minimum current threshold exceeded (critical) b1 - Low current threshold exceeded (warning) b2 - High current threshold exceeded (wa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.4.1.3 |
||||||
|
isxModularDistSubFeedLoadingCurrent
mandatory
The current flowing though this subfeed phase. Measured in tenths of amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.4.1.4 |
||||||
|
isxModularDistSubFeedLoadingPercent
mandatory
The loading on this subfeed phase as a percentage of the subfeed's current rating.
Expressed in tenths of percent. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.4.1.5 |
||||||
|
isxModularDistSubFeedLoadingPower
mandatory
The power being supplied by this subfeed phase. Measured in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.3.4.1.6 |
.1.3.6.1.4.1.318.1.1.22.4.1.15
·
1 row entry
·
4 columns
Allows for getting the system output voltage information.
An entry containing data for an individual system output phase.
Indexes
isxModularDistSysVoltagePhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
isxModularDistSysVoltagePhaseIndex
mandatory
Description of each phase entry in the table.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.4.1.15.1.1 |
||||||
|
isxModularDistSysVoltageAlarmStatus
mandatory
This is a bit map representing the active alarms for this output phase:
b0 - Minimum voltage threshold exceeded (critical) b1 - Low voltage threshold exceeded (warning) b2 - High voltage threshold exceede… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.4.1.15.1.2 |
||||||
|
isxModularDistSysVoltageLtoN
mandatory
Line-to-neutral system output voltage available at the distribution panel.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.4.1.15.1.3 |
||||||
|
isxModularDistSysVoltageLtoL
mandatory
Line-to-line system output voltage available at the distribution panel.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.4.1.15.1.4 |
.1.3.6.1.4.1.318.1.1.22.4.2.11
·
1 row entry
·
4 columns
Allows for getting the total system phase current information.
An entry containing data for an individual system output phase.
Indexes
isxModularDistSysCurrentPhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
isxModularDistSysCurrentPhaseIndex
mandatory
Description of each phase entry in the table.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.4.2.11.1.1 |
||||||
|
isxModularDistSysCurrentAlarmStatus
mandatory
This is a bit map representing the active alarms for this output phase:
b0 - Minimum current threshold exceeded (critical) b1 - Low current threshold exceeded (warning) b2 - High current threshold exceede… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.4.2.11.1.2 |
||||||
|
isxModularDistSysCurrentAmps
mandatory
The current flowing though this system output phase. Measured in tenths of amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.4.2.11.1.3 |
||||||
|
isxModularDistSysCurrentPercent
mandatory
The loading on this system output phase as a percentage of the panel current rating.
Expressed in tenths of percent. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.4.2.11.1.4 |
.1.3.6.1.4.1.318.1.1.22.4.3.5
·
1 row entry
·
3 columns
Allows for getting the total system phase power loading information.
An entry containing data for an individual system output phase.
Indexes
isxModularDistSysPowerPhaseIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
isxModularDistSysPowerPhaseIndex
mandatory
Description of each phase entry in the table.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.22.4.3.5.1.1 |
||||||
|
isxModularDistSysPowerKw
mandatory
The power being supplied by this system output phase. Measured in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.4.3.5.1.2 |
||||||
|
isxModularDistSysPowerKwhPhaseUsage
mandatory
The energy consumed by the load equipment on this system output phase.
This is the total since the date specified in the isxModularDistSysPowerKwhResetDate OID, and may be cleared using the isxModularDistSysPowerKwhRese… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.22.4.3.5.1.3 |
.1.3.6.1.4.1.318.1.1.25.1.2
·
1 row entry
·
10 columns
Allows for getting sensor status information.
The unit from which to get data.
Indexes
uioSensorStatusPortID uioSensorStatusSensorID
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
uioSensorStatusPortID
mandatory
The ID of the port to which the sensor is attached.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.2.1.1 |
||||||||
|
uioSensorStatusSensorID
mandatory
The ID of the sensor.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.2.1.2 |
||||||||
|
uioSensorStatusSensorName
mandatory
The sensor name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.1.2.1.3 |
||||||||
|
uioSensorStatusSensorLocation
mandatory
The location of the sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.1.2.1.4 |
||||||||
|
uioSensorStatusTemperatureDegF
mandatory
The sensor's current temperature reading in degrees Fahrenheit.
-1 indicates an invalid reading due to lost communications. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.2.1.5 |
||||||||
|
uioSensorStatusTemperatureDegC
mandatory
The sensor's current temperature reading in degrees Celsius.
-1 indicates an invalid reading due to lost communications. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.2.1.6 |
||||||||
|
uioSensorStatusHumidity
mandatory
The sensor's current humidity reading in percent relative
humidity. -1 indicates an invalid reading due to either a sensor that doesn't read humidity or lost communications. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.2.1.7 |
||||||||
|
uioSensorStatusViolationStatus
mandatory
The violation status of the sensor. This integer should be interpreted
as a bit map, with each bit representing the presence or absence of the specific alarm conditions listed below. The bit will be '1' if the conditi… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.2.1.8 |
||||||||
|
uioSensorStatusAlarmStatus
mandatory
The alarm status of the sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.2.1.9 |
||||||||
|
uioSensorStatusCommStatus
mandatory
The communications status of the sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.2.1.10 |
.1.3.6.1.4.1.318.1.1.25.1.4
·
1 row entry
·
22 columns
Allows for configuring the sensor.
The sensor from which to get configuration.
Indexes
uioSensorConfigPortID uioSensorConfigSensorID
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
uioSensorConfigPortID
mandatory
The ID of the port to which the sensor is attached.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.1 |
||||
|
uioSensorConfigSensorID
mandatory
The ID of the sensor.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.2 |
||||
|
uioSensorConfigSensorName
mandatory
The sensor name.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.1.4.1.3 |
||||
|
uioSensorConfigSensorLocation
mandatory
The location of the sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.1.4.1.4 |
||||
|
uioSensorConfigMinTemperatureThreshold
mandatory
The minimum (critical) temperature alarm threshold for the
probe in degrees C. Must be lower than the low threshold to ensure proper sensor alarm behavior. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.5 |
||||
|
uioSensorConfigLowTemperatureThreshold
mandatory
The low (warning) temperature alarm threshold for the probe
in degrees C. Must be higher than the minimum threshold and lower than the high threshold to ensure proper sensor alarm behavior. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.6 |
||||
|
uioSensorConfigHighTemperatureThreshold
mandatory
The high (warning) temperature alarm threshold for the probe
in degrees C. Must be lower than the maximum threshold and higher than the low threshold to ensure proper sensor alarm behavior. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.7 |
||||
|
uioSensorConfigMaxTemperatureThreshold
mandatory
The maximum (critical) temperature alarm threshold for the
probe in degrees C. Must be higher than the high threshold to ensure proper sensor alarm behavior. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.8 |
||||
|
uioSensorConfigTemperatureHysteresis
mandatory
The number of degrees C beyond the temperature thresholds at
which an active temperature alarm will be cleared. This value applies to all temperature thresholds. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.9 |
||||
|
uioSensorConfigMinTemperatureEnable
mandatory
The minimum temperature alarm enable/disable for the sensor.
1 - disabled 2 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.4.1.10 |
||||
|
uioSensorConfigLowTemperatureEnable
mandatory
The low temperature alarm enable/disable for the sensor.
1 - disabled 2 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.4.1.11 |
||||
|
uioSensorConfigHighTemperatureEnable
mandatory
The high temperature alarm enable/disable for the sensor.
1 - disabled 2 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.4.1.12 |
||||
|
uioSensorConfigMaxTemperatureEnable
mandatory
The maximum temperature alarm enable/disable for the sensor.
1 - disabled 2 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.4.1.13 |
||||
|
uioSensorConfigMinHumidityThreshold
mandatory
The minimum (critical) humidity alarm threshold for the
probe in percent relative humidity. Must be lower than the low threshold to ensure proper sensor alarm behavior. -1 if the sensor doesn't read humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.14 |
||||
|
uioSensorConfigLowHumidityThreshold
mandatory
The low (warning) humidity alarm threshold for the probe in
percent relative humidity. Must be higher than the minimum threshold and lower than the high threshold to ensure proper sensor alarm behavior. -1 if the sensor… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.15 |
||||
|
uioSensorConfigHighHumidityThreshold
mandatory
The high (warning) humidity alarm threshold for the probe in
percent relative humidity. Must be lower than the maximum threshold and higher than the low threshold to ensure proper sensor alarm behavior. -1 if the sensor… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.16 |
||||
|
uioSensorConfigMaxHumidityThreshold
mandatory
The maximum (critical) humidity alarm threshold for the
probe in percent relative humidity. Must be higher than the high threshold to ensure proper sensor alarm behavior. -1 if the sensor doesn't read humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.17 |
||||
|
uioSensorConfigHumidityHysteresis
mandatory
The number of percent relative humidity beyond the humidity
thresholds at which an active humidity alarm will be cleared. This value applies to all humidity thresholds. -1 if the sensor doesn't read humidity. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.1.4.1.18 |
||||
|
uioSensorConfigMinHumidityEnable
mandatory
The minimum humidity alarm enable/disable for the sensor.
1 - disabled (always set if the sensor doesn't read humidity) 2 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.4.1.19 |
||||
|
uioSensorConfigLowHumidityEnable
mandatory
The low humidity alarm enable/disable for the sensor.
1 - disabled (always set if the sensor doesn't read humidity) 2 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.4.1.20 |
||||
|
uioSensorConfigHighHumidityEnable
mandatory
The high humidity alarm enable/disable for the sensor.
1 - disabled (always set if the sensor doesn't read humidity) 2 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.4.1.21 |
||||
|
uioSensorConfigMaxHumidityEnable
mandatory
The maximum humidity alarm enable/disable for the sensor.
1 - disabled (always set if the sensor doesn't read humidity) 2 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.1.4.1.22 |
.1.3.6.1.4.1.318.1.1.25.2.2
·
1 row entry
·
7 columns
Allows for getting input contact status information.
The input contact from which to get data.
Indexes
uioInputContactStatusPortID uioInputContactStatusContactID
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
uioInputContactStatusPortID
mandatory
The ID of the port to which the input contact is attached.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.2.2.1.1 |
||||||||
|
uioInputContactStatusContactID
mandatory
The ID of the input contact on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.2.2.1.2 |
||||||||
|
uioInputContactStatusContactName
mandatory
The input contact name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.2.2.1.3 |
||||||||
|
uioInputContactStatusContactLocation
mandatory
The location of the input contact.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.2.2.1.4 |
||||||||
|
uioInputContactStatusCurrentState
mandatory
The current state of the input contact.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.2.2.1.5 |
||||||||
|
uioInputContactStatusAlarmStatus
mandatory
The alarm status of the input contact.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.2.2.1.6 |
||||||||
|
uioInputContactStatusCommStatus
mandatory
The communications status of the input contact.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.2.2.1.7 |
.1.3.6.1.4.1.318.1.1.25.2.4
·
1 row entry
·
7 columns
Allows for configuring the input contacts.
The input contact from which to get configuration.
Indexes
uioInputContactConfigPortID uioInputContactConfigContactID
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
uioInputContactConfigPortID
mandatory
The ID of the port to which the input contact is attached.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.2.4.1.1 |
||||
|
uioInputContactConfigContactID
mandatory
The ID of the input contact on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.2.4.1.2 |
||||
|
uioInputContactConfigContactName
mandatory
The input contact name.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.2.4.1.3 |
||||
|
uioInputContactConfigContactLocation
mandatory
The location of the input contact.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.2.4.1.4 |
||||
|
uioInputContactConfigEnable
mandatory
Enable or disable this input contact.
1 - disabled 2 - enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.2.4.1.5 |
||||
|
uioInputContactConfigNormalState
mandatory
The normal (non-alarm) state of the input contact.
1 - normally open 2 - normally closed |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.2.4.1.6 |
||||
|
uioInputContactConfigSeverity
mandatory
The severity of the alarm that this input contact will
generate in the abnormal state. 1 - critical severity 2 - warning severity |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.2.4.1.7 |
.1.3.6.1.4.1.318.1.1.25.3.2
·
1 row entry
·
7 columns
Allows for getting output relay status information.
The unit from which to get data.
Indexes
uioOutputRelayStatusPortID uioOutputRelayStatusRelayID
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
uioOutputRelayStatusPortID
mandatory
The ID of the port to which the output relay is attached.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.3.2.1.1 |
||||||||
|
uioOutputRelayStatusRelayID
mandatory
The ID of the output relay on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.3.2.1.2 |
||||||||
|
uioOutputRelayStatusRelayName
mandatory
The output relay name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.3.2.1.3 |
||||||||
|
uioOutputRelayStatusRelayLocation
mandatory
The location of the output relay.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.3.2.1.4 |
||||||||
|
uioOutputRelayStatusCurrentState
mandatory
The current state of the output relay.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.3.2.1.5 |
||||||||
|
uioOutputRelayStatusAlarmStatus
mandatory
The alarm status of the output relay.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.3.2.1.6 |
||||||||
|
uioOutputRelayStatusCommStatus
mandatory
The communications status of the output relay.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.3.2.1.7 |
.1.3.6.1.4.1.318.1.1.25.3.4
·
1 row entry
·
8 columns
Allows for configuring the output relay.
The unit from which to get configuration.
Indexes
uioOutputRelayConfigPortID uioOutputRelayConfigRelayID
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
uioOutputRelayConfigPortID
mandatory
The ID of the port to which the output relay is attached.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.3.4.1.1 |
||||
|
uioOutputRelayConfigRelayID
mandatory
The ID of the output relay on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.3.4.1.2 |
||||
|
uioOutputRelayConfigRelayName
mandatory
The output relay name.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.3.4.1.3 |
||||
|
uioOutputRelayConfigRelayLocation
mandatory
The location of the output relay.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.3.4.1.4 |
||||
|
uioOutputRelayConfigNormalState
mandatory
The normal state of the output relay.
1 - normally open 2 - normally closed |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.3.4.1.5 |
||||
|
uioOutputRelayConfigControlState
mandatory
Close or open the output relay for testing purposes. Always
returns 1 when read. 1 - close output relay 2 - open output relay |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.3.4.1.6 |
||||
|
uioOutputRelayConfigDelay
mandatory
The time a selected alarm condition must exist before the
output relay is activated. Valid values are whole seconds from 0 to 65535. |
RFC1155-SMITimeTicksr/w Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.25.3.4.1.7 |
||||
|
uioOutputRelayConfigHold
mandatory
The minimum time the output relay remains activated after the
alarm occurs. Valid values are whole seconds from 0 to 65535. |
RFC1155-SMITimeTicksr/w Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.25.3.4.1.8 |
.1.3.6.1.4.1.318.1.1.25.4.2
·
1 row entry
·
7 columns
Allows for getting fluid sensor status information.
The unit from which to get data.
Indexes
uioSpotFluidSensorStatusPortID uioSpotFluidSensorStatusSensorID
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
uioSpotFluidSensorStatusPortID
mandatory
The ID of the port to which the fluid sensor is attached.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.4.2.1.1 |
||||||||
|
uioSpotFluidSensorStatusSensorID
mandatory
The ID of the fluid sensor on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.4.2.1.2 |
||||||||
|
uioSpotFluidSensorStatusSensorName
mandatory
The fluid sensor name.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.4.2.1.3 |
||||||||
|
uioSpotFluidSensorStatusSensorLocation
mandatory
The location of the fluid sensor.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.4.2.1.4 |
||||||||
|
uioSpotFluidSensorStatusCurrentState
mandatory
The current state of the fluid sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.4.2.1.5 |
||||||||
|
uioSpotFluidSensorStatusAlarmStatus
mandatory
The alarm status of the fluid sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.4.2.1.6 |
||||||||
|
uioSpotFluidSensorStatusCommStatus
mandatory
The communications status of the fluid sensor.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.25.4.2.1.7 |
.1.3.6.1.4.1.318.1.1.25.4.4
·
1 row entry
·
4 columns
Allows for configuring the fluid sensor.
The unit from which to get configuration.
Indexes
uioSpotFluidSensorConfigPortID uioSpotFluidSensorConfigSensorID
| Column | Syntax | OID |
|---|---|---|
|
uioSpotFluidSensorConfigPortID
mandatory
The ID of the port to which the fluid sensor is attached.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.4.4.1.1 |
|
uioSpotFluidSensorConfigSensorID
mandatory
The ID of the fluid sensor on the module.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.25.4.4.1.2 |
|
uioSpotFluidSensorConfigSensorName
mandatory
The fluid sensor name.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.4.4.1.3 |
|
uioSpotFluidSensorConfigSensorLocation
mandatory
The location of the fluid sensor.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.25.4.4.1.4 |
.1.3.6.1.4.1.318.1.1.26.2
·
1 row entry
·
16 columns
A table of Rack PDU identification data
Identification data from Rack PDU being queried
Indexes
rPDU2IdentIndex
| Column | Syntax | OID |
|---|---|---|
|
rPDU2IdentIndex
mandatory
The index to the Rack PDU identification table
entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.2.1.1 |
|
rPDU2IdentModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.2.1.2 |
|
rPDU2IdentName
mandatory
A user-defined string identifying the Rack PDU
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.3 |
|
rPDU2IdentLocation
mandatory
A user-defined string identifying the location
of the Rack PDU |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.4 |
|
rPDU2IdentHardwareRev
mandatory
The Rack PDU hardware version
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.5 |
|
rPDU2IdentFirmwareRev
mandatory
The Rack PDU firmware version
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.6 |
|
rPDU2IdentDateOfManufacture
mandatory
The date the Rack PDU was manufactured
in mm/dd/yyyy format |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.7 |
|
rPDU2IdentModelNumber
mandatory
The Rack PDU model number
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.8 |
|
rPDU2IdentSerialNumber
mandatory
The Rack PDU serial number
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.9 |
|
rPDU2IdentContact
mandatory
A user-defined string identifying the
person to contact regarding the Rack PDU |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.10 |
|
rPDU2IdentBootMonitorRev
mandatory
The Rack PDU Boot Monitor version
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.11 |
|
rPDU2IdentLongDescription
mandatory
The Rack PDU Long Description name
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.12 |
|
rPDU2IdentNMCSerialNumber
mandatory
The Rack PDU Network Management Card (NMC) serial number
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.13 |
|
rPDU2IndentAppBuildDate
mandatory
The Rack PDU Application build date
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.14 |
|
rPDU2IndentAOSBuildDate
mandatory
The Rack PDU AOS build date
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.15 |
|
rPDU2IndentBootMonBuildDate
mandatory
The Rack PDU Boot Monitor build date
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.2.1.16 |
.1.3.6.1.4.1.318.1.1.26.4.1
·
1 row entry
·
14 columns
A table of Rack PDU configuration data
Configuration data from Rack PDU being queried
Indexes
rPDU2DeviceConfigIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
rPDU2DeviceConfigIndex
mandatory
The index to the Rack PDU table entry
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.1.1.1 |
||||||
|
rPDU2DeviceConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.1.1.2 |
||||||
|
rPDU2DeviceConfigName
mandatory
A user-defined string identifying the Rack PDU
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.1.1.3 |
||||||
|
rPDU2DeviceConfigLocation
mandatory
A user-defined string identifying the location
of the Rack PDU |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.1.1.4 |
||||||
|
rPDU2DeviceConfigDisplayOrientation
mandatory
Indicates the intended physical orientation
of the display. displayNormal(1) indicates normal orientation displayReverse(2) indicates upside down orientation |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.1.1.5 |
||||||
|
rPDU2DeviceConfigColdstartDelay
mandatory
The amount of delay, measured in seconds, between
when power is provided to the Rack PDU and when the Rack PDU provides basic master power to the outlets. Allowed values are: -1 - never apply power automatically. … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.1.1.6 |
||||||
|
rPDU2DeviceConfigLowLoadPowerThreshold
mandatory
User-defined low power draw alarm threshold,
measured in tenths of kilowatts. Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.1.1.7 |
||||||
|
rPDU2DeviceConfigNearOverloadPowerThreshold
mandatory
User-defined near power overload threshold,
measured in tenths of kilowatts. Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.1.1.8 |
||||||
|
rPDU2DeviceConfigOverloadPowerThreshold
mandatory
User-defined power overload threshold,
measured in tenths of kilowatts. Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.1.1.9 |
||||||
|
rPDU2DeviceConfigDevicePeakPowerReset
mandatory
Setting this OID to reset (2) will cause the existing peak power value
to be replaced by the current load power value. Getting this OID will do nothing and return the noOperation(1) value. Models that do … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.1.1.10 |
||||||
|
rPDU2DeviceConfigDeviceEnergyReset
mandatory
Setting this OID to reset (2) will cause the device energy meter value
to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(1) value. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.1.1.11 |
||||||
|
rPDU2DeviceConfigOutletsEnergyReset
mandatory
Setting this OID to reset (2) will cause the all outlet energy meter values
to be reset to zero. Getting this OID will do nothing and return the noOperation(1) value. Models that do not sup… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.1.1.12 |
||||||
|
rPDU2DeviceConfigOutletsPeakLoadReset
mandatory
Setting this OID to reset (2) will cause the all outlet peak load values
to be reset to zero. Getting this OID will do nothing and return the noOperation(1) value. Models that do not suppor… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.1.1.13 |
||||||
|
rPDU2DeviceConfigContact
mandatory
A user-defined string identifying the
person to contact regarding the Rack PDU |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.1.1.14 |
.1.3.6.1.4.1.318.1.1.26.4.2
·
1 row entry
·
13 columns
A table of Rack PDU properties
Properties of the Rack PDU being queried
Indexes
rPDU2DevicePropertiesIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2DevicePropertiesIndex
mandatory
The index to the Rack PDU properties table entry
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.1 |
||||||||||||||||||||
|
rPDU2DevicePropertiesModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.2 |
||||||||||||||||||||
|
rPDU2DevicePropertiesName
mandatory
A user-defined string identifying the Rack PDU
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.2.1.3 |
||||||||||||||||||||
|
rPDU2DevicePropertiesNumOutlets
mandatory
The number of outlets on the Rack PDU
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.4 |
||||||||||||||||||||
|
rPDU2DevicePropertiesNumSwitchedOutlets
mandatory
The number of switched outlets on the Rack PDU
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.5 |
||||||||||||||||||||
|
rPDU2DevicePropertiesNumMeteredOutlets
mandatory
The number of metered outlets on the Rack PDU
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.6 |
||||||||||||||||||||
|
rPDU2DevicePropertiesNumPhases
mandatory
The number of phases present in the Rack PDU
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.7 |
||||||||||||||||||||
|
rPDU2DevicePropertiesNumMeteredBanks
mandatory
The number of metered banks present in the Rack PDU
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.8 |
||||||||||||||||||||
|
rPDU2DevicePropertiesMaxCurrentRating
mandatory
The maximum current rating, measured in Amps, for
the Rack PDU |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.9 |
||||||||||||||||||||
|
rPDU2DevicePropertiesOrientation
mandatory
Rack PDU orientation
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.2.1.10 |
||||||||||||||||||||
|
rPDU2DevicePropertiesOutletLayout
mandatory
Getting this OID will return outlet layout for the device.
seqPhaseToNeutral(1) indicates outlet layout as follows: 1:1-N,2:2-N,3:3-N,4:1-N,5:2-N,... or for single phase SKUs, all outlets 1-N … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.2.1.11 |
||||||||||||||||||||
|
rPDU2DevicePropertiesMaxPhaseCurrentRating
mandatory
The maximum current rating, measured in Amps, for
the Rack PDU |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.12 |
||||||||||||||||||||
|
rPDU2DevicePropertiesDevicePowerRating
mandatory
The maximum power rating, measured in tenths of kilowatts, for
the Rack PDU |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.2.1.13 |
.1.3.6.1.4.1.318.1.1.26.4.3
·
1 row entry
·
18 columns
A table of Rack PDU status information
Status information from the Rack PDU being queried
Indexes
rPDU2DeviceStatusIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2DeviceStatusIndex
mandatory
The index to the Rack PDU status table entry
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.3.1.1 |
||||||||||
|
rPDU2DeviceStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.3.1.2 |
||||||||||
|
rPDU2DeviceStatusName
mandatory
A user-defined string identifying the Rack PDU
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.3.1.3 |
||||||||||
|
rPDU2DeviceStatusLoadState
mandatory
Indicates the present load status of the Rack PDU.
Models that do not support this feature will respond to this OID with a value of notsupported (5). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.3.1.4 |
||||||||||
|
rPDU2DeviceStatusPower
mandatory
The power consumption of the Rack PDU load in hundredths of kilowatts.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.3.1.5 |
||||||||||
|
rPDU2DeviceStatusPeakPower
mandatory
The peak power consumption of the Rack PDU load in hundredths of kilowatts.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.3.1.6 |
||||||||||
|
rPDU2DeviceStatusPeakPowerTimestamp
mandatory
Indicates the date and time that peak power consumption occurred.
Models that do not support this feature will respond to this OID with string 'notsupported'. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.3.1.7 |
||||||||||
|
rPDU2DeviceStatusPeakPowerStartTime
mandatory
Indicates the date and time of the last device peak power reset.
Models that do not support this feature will respond to this OID with string 'notsupported'. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.3.1.8 |
||||||||||
|
rPDU2DeviceStatusEnergy
mandatory
A user resettable energy meter measuring Rack PDU load
energy consumption in tenths of kilowatt-hours. Models that do not support this feature will respond to this OID with a value of -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.3.1.9 |
||||||||||
|
rPDU2DeviceStatusEnergyStartTime
mandatory
Indicates the date and time of the last device energy
meter reset. Models that do not support this feature will respond to this OID with string 'notsupported'. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.3.1.10 |
||||||||||
|
rPDU2DeviceStatusCommandPending
mandatory
Indicates whether or not the device
is processing a pending command. If the commandPendingUnknown (3) value is returned, all devices powered by the Rack PDU should be shut down. The Rack PDU's power should then be cyc… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.3.1.11 |
||||||||||
|
rPDU2DeviceStatusPowerSupplyAlarm
mandatory
Indicates a power supply alarm is active when value
equals alarm (2) |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.3.1.12 |
||||||||||
|
rPDU2DeviceStatusPowerSupply1Status
mandatory
Indicates whether or not an alarm is active in Power
Supply 1 |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.3.1.13 |
||||||||||
|
rPDU2DeviceStatusPowerSupply2Status
mandatory
Indicates whether or not an alarm is active in Power
Supply 2 |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.3.1.14 |
||||||||||
|
rPDU2DeviceStatusOutletsEnergyStartTime
mandatory
Indicates the date and time of the last outlets energy
meter reset. Models that do not support this feature will respond to this OID with string 'notsupported'. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.3.1.15 |
||||||||||
|
rPDU2DeviceStatusApparentPower
mandatory
The apparent power consumption of the Rack PDU load in hundredths of kiloVoltAmps (kVA).
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.3.1.16 |
||||||||||
|
rPDU2DeviceStatusPowerFactor
mandatory
The power factor of the Rack PDU load in hundredths. Models that do not support this feature
will respond to this OID with a value of -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.3.1.17 |
||||||||||
|
rPDU2DeviceStatusNPSType
mandatory
The device NPS status:
notNPS (1) indicates the Rack PDU is not in an NPS group. host (2) indicates the Rack PDU has been designated as a host in an NPS group. Only one Rack PDU in an NPS group is allowed to be the ho… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.3.1.18 |
.1.3.6.1.4.1.318.1.1.26.4.4
·
1 row entry
·
4 columns
A table of Rack PDU control data
Control data from Rack PDU being queried
Indexes
rPDU2DeviceControlIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2DeviceControlIndex
mandatory
The index to the Rack PDU control table entry
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.4.1.1 |
||||||||||||||||
|
rPDU2DeviceControlModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.4.4.1.2 |
||||||||||||||||
|
rPDU2DeviceControlName
mandatory
A user-defined string identifying the Rack PDU
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.4.4.1.3 |
||||||||||||||||
|
rPDU2DeviceControlCommand
mandatory
Setting this OID to immediateAllOn (1) will turn all outlets
on immediately. Setting this OID to delayedAllOn (2) will turn all outlets on as defined by each outlet's rPDU2OutletSwitchedConfigPowerOnTime … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.4.4.1.4 |
.1.3.6.1.4.1.318.1.1.26.6.1
·
1 row entry
·
8 columns
A table of Rack PDU phase configuration data
Configuration data from currently queried Rack
PDU phase
PDU phase
Indexes
rPDU2PhaseConfigIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2PhaseConfigIndex
mandatory
The index to the Rack PDU phase configuration
table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.1.1.1 |
||||||||
|
rPDU2PhaseConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.1.1.2 |
||||||||
|
rPDU2PhaseConfigNumber
mandatory
The numeric phase ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.1.1.3 |
||||||||
|
rPDU2PhaseConfigOverloadRestriction
mandatory
This OID controls the behavior of a Switched Rack PDU
phase when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will alwa… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.6.1.1.4 |
||||||||
|
rPDU2PhaseConfigLowLoadCurrentThreshold
mandatory
User-defined low load phase current
threshold in Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.1.1.5 |
||||||||
|
rPDU2PhaseConfigNearOverloadCurrentThreshold
mandatory
User-defined near phase overload warning
threshold in Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.1.1.6 |
||||||||
|
rPDU2PhaseConfigOverloadCurrentThreshold
mandatory
User-defined phase overload current
threshold in Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.1.1.7 |
||||||||
|
rPDU2PhaseConfigPhasePeakCurrentReset
mandatory
Setting this OID to reset (2) will cause the existing peak current value
to be replaced by the present load current value. Getting this OID will do nothing and return the noOperation(1) value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.6.1.1.8 |
.1.3.6.1.4.1.318.1.1.26.6.2
·
1 row entry
·
3 columns
A table of Rack PDU phase properties
Properties of the currently queried Rack
PDU phase
PDU phase
Indexes
rPDU2PhasePropertiesIndex
| Column | Syntax | OID |
|---|---|---|
|
rPDU2PhasePropertiesIndex
mandatory
The index to the Rack PDU phase properties
table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.2.1.1 |
|
rPDU2PhasePropertiesModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.2.1.2 |
|
rPDU2PhasePropertiesNumber
mandatory
The numeric phase ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.2.1.3 |
.1.3.6.1.4.1.318.1.1.26.6.3
·
1 row entry
·
12 columns
A table of Rack PDU phase status data
Status data from currently queried Rack PDU
phase
phase
Indexes
rPDU2PhaseStatusIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2PhaseStatusIndex
mandatory
The index to the Rack PDU phase status table
entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.3.1.1 |
||||||||
|
rPDU2PhaseStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.3.1.2 |
||||||||
|
rPDU2PhaseStatusNumber
mandatory
The numeric phase ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.3.1.3 |
||||||||
|
rPDU2PhaseStatusLoadState
mandatory
Indicates the present load status of the Rack PDU
phase being queried |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.6.3.1.4 |
||||||||
|
rPDU2PhaseStatusCurrent
mandatory
Indicates the current draw, in tenths of Amps, of the load
on the Rack PDU phase being queried |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.3.1.5 |
||||||||
|
rPDU2PhaseStatusVoltage
mandatory
Indicates the Voltage, in Volts, of the Rack
PDU phase being queried. Models that do not support this feature will respond to this OID with a value of -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.3.1.6 |
||||||||
|
rPDU2PhaseStatusPower
mandatory
Indicates the load power, in hundredths of kilowatts (kW),
consumed on the Rack PDU phase being queried. Models that do not support this feature will respond to this OID with a value of -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.3.1.7 |
||||||||
|
rPDU2PhaseStatusApparentPower
mandatory
Indicates the load apparent power, in hundredths of kiloVoltAmps (kVA),
consumed on the Rack PDU phase being queried. Models that do not support this feature will respond to this OID with a value of -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.3.1.8 |
||||||||
|
rPDU2PhaseStatusPowerFactor
mandatory
Indicates the load power factor, in hundredths,
of the Rack PDU phase being queried. Models that do not support this feature will respond to this OID with a value of -1. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.3.1.9 |
||||||||
|
rPDU2PhaseStatusPeakCurrent
mandatory
The peak current of the Rack PDU phase load in tenths of Amps
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.6.3.1.10 |
||||||||
|
rPDU2PhaseStatusPeakCurrentTimestamp
mandatory
Indicates the date and time that the peak current occurred
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.6.3.1.11 |
||||||||
|
rPDU2PhaseStatusPeakCurrentStartTime
mandatory
Indicates the date and time of the last phase peak current reset
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.6.3.1.12 |
.1.3.6.1.4.1.318.1.1.26.8.1
·
1 row entry
·
8 columns
A table of Rack PDU bank configuration data
Configuration data from currently queried
Rack PDU bank
Rack PDU bank
Indexes
rPDU2BankConfigIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2BankConfigIndex
mandatory
The index to the Rack PDU bank configuration
table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.1.1.1 |
||||||||
|
rPDU2BankConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.1.1.2 |
||||||||
|
rPDU2BankConfigNumber
mandatory
The numeric bank ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.1.1.3 |
||||||||
|
rPDU2BankConfigOverloadRestriction
mandatory
This OID controls the behavior of a Switched Rack PDU
bank when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will alway… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.8.1.1.4 |
||||||||
|
rPDU2BankConfigLowLoadCurrentThreshold
mandatory
User-defined low load bank current
threshold in Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.1.1.5 |
||||||||
|
rPDU2BankConfigNearOverloadCurrentThreshold
mandatory
User-defined near bank overload current warning
threshold in Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.1.1.6 |
||||||||
|
rPDU2BankConfigOverloadCurrentThreshold
mandatory
User-defined bank overload current threshold
in Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.1.1.7 |
||||||||
|
rPDU2BankConfigBankPeakCurrentReset
mandatory
Setting this OID to reset (2) will cause the existing peak current value
to be replaced by the present load current value. Getting this OID will do nothing and return the noOperation(1) value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.8.1.1.8 |
.1.3.6.1.4.1.318.1.1.26.8.2
·
1 row entry
·
5 columns
A table of Rack PDU bank properties
Properties of the currently queried
Rack PDU bank
Rack PDU bank
Indexes
rPDU2BankPropertiesIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2BankPropertiesIndex
mandatory
The index to the Rack PDU bank properties
table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.2.1.1 |
||||||||||||
|
rPDU2BankPropertiesModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.2.1.2 |
||||||||||||
|
rPDU2BankPropertiesNumber
mandatory
The numeric bank ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.2.1.3 |
||||||||||||
|
rPDU2BankPropertiesPhaseLayout
mandatory
This OID describes the outlet phase connections on
the referenced bank as follows: seqPhase1ToNeutral(1) indicates that bank outlets are wired from Phase 1 to Neutral. seqPhase2ToNeutral(2)… |
Rpdu2OutletPhaseLayoutType Textual Convention: Rpdu2OutletPhaseLayoutType EnumerationType Values:
|
.1.3.6.1.4.1.318.1.1.26.8.2.1.4 |
||||||||||||
|
rPDU2BankPropertiesBreakerRating
mandatory
If bank circuit breakers are present on the device, this OID will return
the rating of the breaker in Amps. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.2.1.5 |
.1.3.6.1.4.1.318.1.1.26.8.3
·
1 row entry
·
8 columns
A table of Rack PDU bank status data
Status data from currently queried Rack PDU
bank
bank
Indexes
rPDU2BankStatusIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2BankStatusIndex
mandatory
The index to the Rack PDU bank status
table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.3.1.1 |
||||||||
|
rPDU2BankStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.3.1.2 |
||||||||
|
rPDU2BankStatusNumber
mandatory
The numeric bank ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.3.1.3 |
||||||||
|
rPDU2BankStatusLoadState
mandatory
Indicates the present load status of the Rack PDU
bank being queried |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.8.3.1.4 |
||||||||
|
rPDU2BankStatusCurrent
mandatory
Indicates the current draw, in tenths of Amps, of the load
on the Rack PDU bank being queried |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.3.1.5 |
||||||||
|
rPDU2BankStatusPeakCurrent
mandatory
The peak current of the Rack PDU bank load in tenths of Amps
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.8.3.1.6 |
||||||||
|
rPDU2BankStatusPeakCurrentTimestamp
mandatory
Indicates the date and time the bank peak current occurred
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.8.3.1.7 |
||||||||
|
rPDU2BankStatusPeakCurrentStartTime
mandatory
Indicates the date and time of the last bank peak current reset
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.8.3.1.8 |
.1.3.6.1.4.1.318.1.1.26.9.2.1
·
1 row entry
·
8 columns
A table of Rack PDU switched outlet configuration data
Configuration data from currently queried
Rack PDU switched outlet
Rack PDU switched outlet
Indexes
rPDU2OutletSwitchedConfigIndex
| Column | Syntax | OID |
|---|---|---|
|
rPDU2OutletSwitchedConfigIndex
mandatory
The index to the Rack PDU switched outlet
configuration table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.1.1.1 |
|
rPDU2OutletSwitchedConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.1.1.2 |
|
rPDU2OutletSwitchedConfigName
mandatory
The user-defined switched outlet ID string
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.2.1.1.3 |
|
rPDU2OutletSwitchedConfigNumber
mandatory
The numeric switched outlet ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.1.1.4 |
|
rPDU2OutletSwitchedConfigPowerOnTime
mandatory
The amount of delay, in seconds, between when
power is provided to the Rack PDU and when this switched outlet starts providing power. Range -1...7200 where -1 = Never power on, 0 = immediate power on, and 1-7200 = secon… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.1.1.5 |
|
rPDU2OutletSwitchedConfigPowerOffTime
mandatory
The amount of time, in seconds, this outlet will
delay powering off. Range -1...7200 where -1 = Never power off, 0 = immediate power off, and 1-7200 = seconds to delay. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.1.1.6 |
|
rPDU2OutletSwitchedConfigRebootDuration
mandatory
After turning power off during a reboot sequence,
the amount of time to wait before turning power to this outlet back on. Range 5-60 seconds delay. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.1.1.7 |
|
rPDU2OutletSwitchedConfigExternalLink
mandatory
User-defined external device web link.
Possible use cases could be the IP address of the external device plugged into the outlet or its manufacturer web page for convenient support such as user manuals, specifications… |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.2.1.1.8 |
.1.3.6.1.4.1.318.1.1.26.9.2.2
·
1 row entry
·
6 columns
A table of Rack PDU switched outlet properties
Properties of the currently queried Rack PDU
switched outlet
switched outlet
Indexes
rPDU2OutletSwitchedPropertiesIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2OutletSwitchedPropertiesIndex
mandatory
The index to the Rack PDU switched outlet
properties table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.2.1.1 |
||||||||||||
|
rPDU2OutletSwitchedPropertiesModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.2.1.2 |
||||||||||||
|
rPDU2OutletSwitchedPropertiesName
mandatory
The user-defined switched outlet ID string
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.2.2.1.3 |
||||||||||||
|
rPDU2OutletSwitchedPropertiesNumber
mandatory
The numeric switched outlet ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.2.1.4 |
||||||||||||
|
rPDU2OutletSwitchedPropertiesPhaseLayout
mandatory
This OID describes the phase connections of
the referenced outlet as follows: seqPhase1ToNeutral(1) indicates that the outlet is wired from Phase 1 to Neutral. seqPhase2ToNeutral(2) indicat… |
Rpdu2OutletPhaseLayoutType Textual Convention: Rpdu2OutletPhaseLayoutType EnumerationType Values:
|
.1.3.6.1.4.1.318.1.1.26.9.2.2.1.5 |
||||||||||||
|
rPDU2OutletSwitchedPropertiesBank
mandatory
The numeric bank ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.2.1.6 |
.1.3.6.1.4.1.318.1.1.26.9.2.3
·
1 row entry
·
7 columns
A table of Rack PDU switched outlet status information
Status information for currently queried
Rack PDU switched outlet
Rack PDU switched outlet
Indexes
rPDU2OutletSwitchedStatusIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
rPDU2OutletSwitchedStatusIndex
mandatory
The index to the Rack PDU switched outlet
status information table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.3.1.1 |
||||||
|
rPDU2OutletSwitchedStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.3.1.2 |
||||||
|
rPDU2OutletSwitchedStatusName
mandatory
The user-defined switched outlet ID string
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.2.3.1.3 |
||||||
|
rPDU2OutletSwitchedStatusNumber
mandatory
The numeric switched outlet ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.3.1.4 |
||||||
|
rPDU2OutletSwitchedStatusState
mandatory
Indicates the present switch state of the Rack
PDU switched outlet being queried |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.9.2.3.1.5 |
||||||
|
rPDU2OutletSwitchedStatusCommandPending
mandatory
Indicates whether or not the device is
processing a command for this outlet. If the commandPendingUnknown (3) value is returned, all devices powered by the Rack PDU should be shut down. The Rack PDU's po… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.9.2.3.1.6 |
||||||
|
rPDU2OutletSwitchedStatusExternalLink
mandatory
Each RPDU outlet can have its own external web URL link.
This can be configured in the rPDU2OutletSwitchedConfigExternalLink OID. When this link is clicked in the web interface, the linked URL will open in the web b… |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.2.3.1.7 |
.1.3.6.1.4.1.318.1.1.26.9.2.4
·
1 row entry
·
5 columns
A table of Rack PDU switched outlet control data
Control data for currently queried Rack
PDU switched outlet
PDU switched outlet
Indexes
rPDU2OutletSwitchedControlIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2OutletSwitchedControlIndex
mandatory
The index to the Rack PDU switched outlet
control data table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.4.1.1 |
||||||||||||||||
|
rPDU2OutletSwitchedControlModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.4.1.2 |
||||||||||||||||
|
rPDU2OutletSwitchedControlName
mandatory
The user-defined switched outlet ID string
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.2.4.1.3 |
||||||||||||||||
|
rPDU2OutletSwitchedControlNumber
mandatory
The numeric switched outlet ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.2.4.1.4 |
||||||||||||||||
|
rPDU2OutletSwitchedControlCommand
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the immediateOn (1) value will be returned. If the outlet is off, the immediateOff (2) value will be returned. If the state of the outlet cannot b… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.9.2.4.1.5 |
.1.3.6.1.4.1.318.1.1.26.9.4.1
·
1 row entry
·
8 columns
A table of Rack PDU metered outlet configuration data
Configuration data from currently queried
Rack PDU metered outlet
Rack PDU metered outlet
Indexes
rPDU2OutletMeteredConfigIndex
| Column | Syntax | OID |
|---|---|---|
|
rPDU2OutletMeteredConfigIndex
mandatory
The index to the Rack PDU metered outlet
configuration table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.1.1.1 |
|
rPDU2OutletMeteredConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.1.1.2 |
|
rPDU2OutletMeteredConfigName
mandatory
The user-defined metered outlet ID string
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.4.1.1.3 |
|
rPDU2OutletMeteredConfigNumber
mandatory
The numeric switched outlet ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.1.1.4 |
|
rPDU2OutletMeteredConfigLowLoadCurrentThreshold
mandatory
User-defined low load outlet current threshold in Watts
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.1.1.5 |
|
rPDU2OutletMeteredConfigNearOverloadCurrentThreshold
mandatory
User-defined near outlet overload warning threshold
in Watts |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.1.1.6 |
|
rPDU2OutletMeteredConfigOverloadCurrentThreshold
mandatory
User-defined outlet overload current threshold in Watts
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.1.1.7 |
|
rPDU2OutletMeteredConfigExternalLink
mandatory
User-defined external device web link.
Possible use cases could be the IP address of the external device plugged into the outlet or its manufacturer web page for convenient support such as user manuals, specifications… |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.4.1.1.8 |
.1.3.6.1.4.1.318.1.1.26.9.4.2
·
1 row entry
·
7 columns
A table of Rack PDU metered outlet properties
Properties of currently queried Rack PDU
metered outlet
metered outlet
Indexes
rPDU2OutletMeteredPropertiesIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2OutletMeteredPropertiesIndex
mandatory
The index to the Rack PDU metered properties table
entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.2.1.1 |
||||||||||||
|
rPDU2OutletMeteredPropertiesModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.2.1.2 |
||||||||||||
|
rPDU2OutletMeteredPropertiesName
mandatory
The user-defined metered outlet ID string
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.4.2.1.3 |
||||||||||||
|
rPDU2OutletMeteredPropertiesNumber
mandatory
The numeric metered outlet ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.2.1.4 |
||||||||||||
|
rPDU2OutletMeteredPropertiesLayout
mandatory
This OID describes the phase connections of
the referenced outlet as follows: seqPhase1ToNeutral(1) indicates that the outlet is wired from Phase 1 to Neutral. seqPhase2ToNeutral(2) indicat… |
Rpdu2OutletPhaseLayoutType Textual Convention: Rpdu2OutletPhaseLayoutType EnumerationType Values:
|
.1.3.6.1.4.1.318.1.1.26.9.4.2.1.5 |
||||||||||||
|
rPDU2OutletMeteredPropertiesPowerRating
mandatory
Maximum power rating of Rack PDU metered outlet
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.2.1.6 |
||||||||||||
|
rPDU2OutletMeteredPropertiesBank
mandatory
This outlet's numeric bank ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.2.1.7 |
.1.3.6.1.4.1.318.1.1.26.9.4.3
·
1 row entry
·
13 columns
A table of Rack PDU metered outlet status data
Status data from currently queried Rack PDU
metered outlet
metered outlet
Indexes
rPDU2OutletMeteredStatusIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2OutletMeteredStatusIndex
mandatory
The index to the Rack PDU metered status table
entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.1 |
||||||||
|
rPDU2OutletMeteredStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.2 |
||||||||
|
rPDU2OutletMeteredStatusName
mandatory
The user-defined metered outlet ID string
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.3 |
||||||||
|
rPDU2OutletMeteredStatusNumber
mandatory
The numeric metered outlet ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.4 |
||||||||
|
rPDU2OutletMeteredStatusState
mandatory
Indicates the present load status of the Rack
PDU metered outlet being queried |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.5 |
||||||||
|
rPDU2OutletMeteredStatusCurrent
mandatory
Indicates the current draw, in tenths
of Amps, of the load on the Rack PDU outlet being queried |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.6 |
||||||||
|
rPDU2OutletMeteredStatusPower
mandatory
Indicates the power draw of the load
on the Rack PDU outlet being queried |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.7 |
||||||||
|
rPDU2OutletMeteredStatusPeakPower
mandatory
Indicates the peak power load draw
on the Rack PDU outlet being queried |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.8 |
||||||||
|
rPDU2OutletMeteredStatusPeakPowerTimestamp
mandatory
Indicates the date and time that this metered
outlet's peak power consumption occurred |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.9 |
||||||||
|
rPDU2OutletMeteredStatusPeakPowerStartTime
mandatory
Indicates the start date and time that this metered
outlet began recording peak power observations |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.10 |
||||||||
|
rPDU2OutletMeteredStatusEnergy
mandatory
A user resettable energy meter measuring Rack PDU load
energy consumption in tenths of kilowatt-hours |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.11 |
||||||||
|
rPDU2OutletMeteredStatusReceptacleType
mandatory
Indicates receptacle type for the outlet.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.12 |
||||||||
|
rPDU2OutletMeteredStatusExternalLink
mandatory
Each RPDU outlet can have its own external web URL link.
This can be configured in the rPDU2OutletMeteredConfigExternalLink OID. When this link is clicked in the web interface, the linked URL will open in the web br… |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.9.4.3.1.13 |
.1.3.6.1.4.1.318.1.1.26.10.2.1
·
1 row entry
·
16 columns
A table of temperature-humidity sensor configuration data
Configuration data from temperature-humidity sensor
being queried
being queried
Indexes
rPDU2SensorTempHumidityConfigIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
rPDU2SensorTempHumidityConfigIndex
mandatory
The index to the temperature-humidity sensor
configuration data table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.1 |
||||
|
rPDU2SensorTempHumidityConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.2 |
||||
|
rPDU2SensorTempHumidityConfigName
mandatory
The user-defined temperature-humidity
sensor ID string |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.3 |
||||
|
rPDU2SensorTempHumidityConfigNumber
mandatory
The temperature-humidity sensor numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.4 |
||||
|
rPDU2SensorTempHumidityConfigTemperatureAlarmEnable
mandatory
Setting this OID enables or disables generation
of sensor temperature alarm. Getting this OID returns the current value of the temperature alarm enable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.5 |
||||
|
rPDU2SensorTempHumidityConfigHumidityAlarmEnable
mandatory
Setting this OID enables or disables generation
of sensor humidity alarm. Getting this OID returns the current value of the humidity alarm enable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.6 |
||||
|
rPDU2SensorTempHumidityConfigTempMaxThreshF
mandatory
Sensor maximum temperature alarm threshold in
Fahrenheit. Attempting to set this OID to a value less than or equal to that of rPDU2SensorTempHumidityConfigTempHighThreshF will result in an error. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.7 |
||||
|
rPDU2SensorTempHumidityConfigTempHighThreshF
mandatory
Sensor high temperature warning alarm threshold
in Fahrenheit. Attempting to set this OID to a value greater than or equal to that of rPDU2SensorTempHumidityConfigTempMaxThreshF will result in an error. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.8 |
||||
|
rPDU2SensorTempHumidityConfigTempHysteresisF
mandatory
Sensor temperature hysteresis setting in Fahrenheit
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.9 |
||||
|
rPDU2SensorTempHumidityConfigTempMaxThreshC
mandatory
Sensor maximum temperature alarm threshold
in Celsius. Attempting to set this OID to a value less than or equal to that of rPDU2SensorTempHumidityConfigTempHighThreshC will result in an error. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.10 |
||||
|
rPDU2SensorTempHumidityConfigTempHighThreshC
mandatory
Sensor high temperature warning alarm threshold
in Celsius. Attempting to set this OID to a value greater than or equal to that of rPDU2SensorTempHumidityConfigTempMaxThreshC will result in an error. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.11 |
||||
|
rPDU2SensorTempHumidityConfigTempHysteresisC
mandatory
Sensor temperature hysteresis setting in Celsius
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.12 |
||||
|
rPDU2SensorTempHumidityConfigHumidityLowThresh
mandatory
Sensor low humidity warning alarm threshold in
percent relative humidity. May be 10% to 90%, but must be greater than rPDU2SensorTempHumidityConfigHumidityMinThresh. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.13 |
||||
|
rPDU2SensorTempHumidityConfigHumidityMinThresh
mandatory
Sensor minimum humidity alarm threshold in
percent relative humidity. May be 10% to 90%, but must be less than rPDU2SensorTempHumidityConfigHumidityLowThresh. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.14 |
||||
|
rPDU2SensorTempHumidityConfigHumidityHysteresis
mandatory
Sensor humidity hysteresis setting in percent relative
humidity |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.15 |
||||
|
rPDU2SensorTempHumidityConfigTempPeakReset
mandatory
Setting this OID to reset (2) will cause the existing peak temperature
to be replaced by the present temperature reading. Getting this OID will do nothing and return the noOperation(1) value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.2.1.1.16 |
.1.3.6.1.4.1.318.1.1.26.10.2.2
·
1 row entry
·
15 columns
A table of temperature-humidity sensor status data
Status information from temperature-humidity sensor
being queried
being queried
Indexes
rPDU2SensorTempHumidityStatusIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2SensorTempHumidityStatusIndex
mandatory
The index to the temperature-humidity
status data table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.1 |
||||||||||||
|
rPDU2SensorTempHumidityStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.2 |
||||||||||||
|
rPDU2SensorTempHumidityStatusName
mandatory
The user-defined temperature-humidity
sensor ID string |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.3 |
||||||||||||
|
rPDU2SensorTempHumidityStatusNumber
mandatory
The temperature-humidity sensor numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.4 |
||||||||||||
|
rPDU2SensorTempHumidityStatusType
mandatory
The type of the sensor
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.5 |
||||||||||||
|
rPDU2SensorTempHumidityStatusCommStatus
mandatory
The communications status of the sensor
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.6 |
||||||||||||
|
rPDU2SensorTempHumidityStatusTempF
mandatory
Sensor temperature reading in tenths of degrees Fahrenheit
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.7 |
||||||||||||
|
rPDU2SensorTempHumidityStatusTempC
mandatory
Sensor temperature reading in tenths of degrees Celsius
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.8 |
||||||||||||
|
rPDU2SensorTempHumidityStatusTempStatus
mandatory
This OID reports the current state of the temperature probe.
A notPresent (1) response indicates that no probe is attached. A belowMin (2) response indicates that the probe is present and its measured tem… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.9 |
||||||||||||
|
rPDU2SensorTempHumidityStatusRelativeHumidity
mandatory
Sensor humidity reading in percent relative humidity
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.10 |
||||||||||||
|
rPDU2SensorTempHumidityStatusHumidityStatus
mandatory
This OID reports the current state of the humidity probe.
A notPresent (1) response indicates that no probe is attached. A belowMin (2) response indicates that the probe is present and its measured humidi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.11 |
||||||||||||
|
rPDU2SensorTempHumidityStatusTempPeakF
mandatory
Sensor peak temperature in tenths of degrees Fahrenheit
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.12 |
||||||||||||
|
rPDU2SensorTempHumidityStatusTempPeakC
mandatory
Sensor peak temperature in tenths of degrees Celsius
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.13 |
||||||||||||
|
rPDU2SensorTempHumidityStatusTempPeakTimestamp
mandatory
Indicates the date and time that the peak temperature occurred
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.14 |
||||||||||||
|
rPDU2SensorTempHumidityStatusTempPeakStartTime
mandatory
Indicates the date and time of the last temperature peak reset
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.10.2.2.1.15 |
.1.3.6.1.4.1.318.1.1.26.10.4.1
·
1 row entry
·
6 columns
A table of discrete sensor configuration data
Configuration data from discreste sensor
being queried
being queried
Indexes
rPDU2SensorDiscreteConfigIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
rPDU2SensorDiscreteConfigIndex
mandatory
The index to the discrete sensor configuration
data table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.4.1.1.1 |
||||||
|
rPDU2SensorDiscreteConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.4.1.1.2 |
||||||
|
rPDU2SensorDiscreteConfigName
mandatory
The user-defined discrete sensor ID string
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.10.4.1.1.3 |
||||||
|
rPDU2SensorDiscreteConfigNumber
mandatory
The discrete sensor numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.4.1.1.4 |
||||||
|
rPDU2SensorDiscreteConfigNormalState
mandatory
Indicates the normal state of the discrete input
contact |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.4.1.1.5 |
||||||
|
rPDU2SensorDiscreteConfigAbnormalSeverity
mandatory
Indicates the severity of alarm triggered by
abnormal discrete input contact state |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.4.1.1.6 |
.1.3.6.1.4.1.318.1.1.26.10.4.2
·
1 row entry
·
8 columns
A table of discrete sensor status data
Status information from discrete sensor
being queried
being queried
Indexes
rPDU2SensorDiscreteStatusIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2SensorDiscreteStatusIndex
mandatory
The index to the discrete sensor status data
table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.4.2.1.1 |
||||||||||||||
|
rPDU2SensorDiscreteStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.4.2.1.2 |
||||||||||||||
|
rPDU2SensorDiscreteStatusName
mandatory
The user-defined discrete sensor ID string
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.10.4.2.1.3 |
||||||||||||||
|
rPDU2SensorDiscreteStatusNumber
mandatory
The discrete sensor numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.4.2.1.4 |
||||||||||||||
|
rPDU2SensorDiscreteStatusType
mandatory
The type of discrete sensor currently being queried
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.4.2.1.5 |
||||||||||||||
|
rPDU2SensorDiscreteStatusCommStatus
mandatory
The communications status of the sensor
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.4.2.1.6 |
||||||||||||||
|
rPDU2SensorDiscreteStatusCurrentState
mandatory
The current open/close state of the discrete
sensor |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.4.2.1.7 |
||||||||||||||
|
rPDU2SensorDiscreteStatusAlarmState
mandatory
Indicates alarm status of discrete sensor input
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.4.2.1.8 |
.1.3.6.1.4.1.318.1.1.26.10.6.1
·
1 row entry
·
7 columns
A table of voltage sensor status data. Not supported by rPDU series 9000 or older.
Status information from voltage sensor
being queried
being queried
Indexes
rPDU2SensorAnalogVoltageStatusIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2SensorAnalogVoltageStatusIndex
mandatory
The index to the voltage sensor status data
table entry |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.318.1.1.26.10.6.1.1.1 |
||||||||||||
|
rPDU2SensorAnalogVoltageStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.6.1.1.2 |
||||||||||||
|
rPDU2SensorAnalogVoltageStatusNumber
mandatory
The voltage sensor numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.6.1.1.3 |
||||||||||||
|
rPDU2SensorAnalogVoltageStatusName
mandatory
The user-defined voltage sensor ID string
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.10.6.1.1.4 |
||||||||||||
|
rPDU2SensorAnalogVoltageStatusCommStatus
mandatory
The communications status of the sensor
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.6.1.1.5 |
||||||||||||
|
rPDU2SensorAnalogVoltageStatusHundredthVolts
mandatory
Sensor voltage reading in hundredths of volts.
Returns -1 for indices without voltage probes. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.6.1.1.6 |
||||||||||||
|
rPDU2SensorAnalogVoltageStatusThreshStatus
mandatory
This OID reports the current state of the voltage probe:
A notPresent (1) response indicates that no probe is attached, or that the attached probe isn't a voltage probe. A belowMin (2) response indicates … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.6.1.1.7 |
.1.3.6.1.4.1.318.1.1.26.10.6.2
·
1 row entry
·
8 columns
A table of analog voltage sensor configuration data. Not supported by rPDU series 9000 or older.
Configuration data from analog voltage sensor
being queried
being queried
Indexes
rPDU2SensorAnalogVoltageConfigIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
rPDU2SensorAnalogVoltageConfigIndex
mandatory
The index to the voltage sensor configuration
data table entry |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.318.1.1.26.10.6.2.1.1 |
||||
|
rPDU2SensorAnalogVoltageConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.6.2.1.2 |
||||
|
rPDU2SensorAnalogVoltageConfigNumber
mandatory
The voltage sensor numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.6.2.1.3 |
||||
|
rPDU2SensorAnalogVoltageConfigName
mandatory
The user-defined voltage sensor ID string.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.26.10.6.2.1.4 |
||||
|
rPDU2SensorAnalogVoltageConfigThreshMin
mandatory
Sensor minimum voltage alarm threshold in hundredths of volts.
This value may be as low as zero and must be less than rPDU2SensorAnalogVoltageConfigThreshMax. Returns -1 for indices without voltage probes. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.6.2.1.5 |
||||
|
rPDU2SensorAnalogVoltageConfigThreshMax
mandatory
Sensor minimum voltage alarm threshold in hundredths of volts.
This value must be greater than rPDU2SensorAnalogVoltageConfigThreshMin and may be as high as 50. Returns -1 for indices without voltage probes. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.6.2.1.6 |
||||
|
rPDU2SensorAnalogVoltageConfigHysteresis
mandatory
Sensor voltage hysteresis in hundredths of volts. This value may be
0 to 20. If either of the alarm thresholds are crossed, the measured voltage must recover by this amount before the alarm will be cleared. Returns -1 f… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.10.6.2.1.7 |
||||
|
rPDU2SensorAnalogVoltageConfigAlarmEnable
mandatory
This OID may be used to enable or disable voltage alarm generation.
Disabling alarm generation while alarms are active clears the active alarms. Returns -1 for indices without voltage probes. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.10.6.2.1.8 |
.1.3.6.1.4.1.318.1.1.26.13.1
·
1 row entry
·
5 columns
A table of Rack PDU phase to phase status data. This table is only applicable to SKUs that have phase to phase outputs.
Status data from currently queried Rack PDU
phase to phase outputs
phase to phase outputs
Indexes
rPDU2PhaseToPhaseStatusIndex
| Column | Syntax | OID |
|---|---|---|
|
rPDU2PhaseToPhaseStatusIndex
mandatory
The index to the Rack PDU phase to phase status table
entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.13.1.1.1 |
|
rPDU2PhaseToPhaseStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.13.1.1.2 |
|
rPDU2PhaseToPhaseStatusVoltage1to2
mandatory
Indicates the Voltage, in Volts, of the Rack
PDU phase 1 to phase 2 output being queried |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.13.1.1.3 |
|
rPDU2PhaseToPhaseStatusVoltage2to3
mandatory
Indicates the Voltage, in Volts, of the Rack
PDU phase 2 to phase 3 output being queried |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.13.1.1.4 |
|
rPDU2PhaseToPhaseStatusVoltage3to1
mandatory
Indicates the Voltage, in Volts, of the Rack
PDU phase 3 to phase 2 output being queried |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.13.1.1.5 |
.1.3.6.1.4.1.318.1.1.26.14.1
·
1 row entry
·
8 columns
A table of Rack PDU bank configuration data
Configuration data from currently queried
Rack PDU bank
Rack PDU bank
Indexes
rPDU2AdvBankConfigIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2AdvBankConfigIndex
mandatory
The index to the Rack PDU bank configuration
table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.14.1.1.1 |
||||||||
|
rPDU2AdvBankConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.14.1.1.2 |
||||||||
|
rPDU2AdvBankConfigNumber
mandatory
The numeric bank ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.14.1.1.3 |
||||||||
|
rPDU2AdvBankConfigOverloadRestriction
mandatory
This OID controls the behavior of a Switched Rack PDU
bank when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will alway… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.14.1.1.4 |
||||||||
|
rPDU2AdvBankConfigLowLoadCurrentThreshold
mandatory
User-defined low load bank current
threshold in tenths of Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.14.1.1.5 |
||||||||
|
rPDU2AdvBankConfigNearOverloadCurrentThreshold
mandatory
User-defined near bank overload current warning
threshold in tenths of Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.14.1.1.6 |
||||||||
|
rPDU2AdvBankConfigOverloadCurrentThreshold
mandatory
User-defined bank overload current threshold
in tenths of Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.14.1.1.7 |
||||||||
|
rPDU2AdvBankConfigBankPeakCurrentReset
mandatory
Setting this OID to reset (2) will cause the existing peak current value
to be replaced by the present load current value. Getting this OID will do nothing and return the noOperation(1) value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.14.1.1.8 |
.1.3.6.1.4.1.318.1.1.26.15.1
·
1 row entry
·
8 columns
A table of Rack PDU phase configuration data
Configuration data from currently queried Rack
PDU phase
PDU phase
Indexes
rPDU2AdvPhaseConfigIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
rPDU2AdvPhaseConfigIndex
mandatory
The index to the Rack PDU phase configuration
table entry |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.15.1.1.1 |
||||||||
|
rPDU2AdvPhaseConfigModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.15.1.1.2 |
||||||||
|
rPDU2AdvPhaseConfigNumber
mandatory
The numeric phase ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.15.1.1.3 |
||||||||
|
rPDU2AdvPhaseConfigOverloadRestriction
mandatory
This OID controls the behavior of a Switched Rack PDU
phase when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will alwa… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.15.1.1.4 |
||||||||
|
rPDU2AdvPhaseConfigLowLoadCurrentThreshold
mandatory
User-defined low load phase current
threshold measured in tenths of Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.15.1.1.5 |
||||||||
|
rPDU2AdvPhaseConfigNearOverloadCurrentThreshold
mandatory
User-defined near phase overload warning
threshold measured in tenths of Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.15.1.1.6 |
||||||||
|
rPDU2AdvPhaseConfigOverloadCurrentThreshold
mandatory
User-defined phase overload current
threshold measured in tenths of Amps |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.26.15.1.1.7 |
||||||||
|
rPDU2AdvPhaseConfigPhasePeakCurrentReset
mandatory
Setting this OID to reset (2) will cause the existing peak current value
to be replaced by the present load current value. Getting this OID will do nothing and return the noOperation(1) value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.26.15.1.1.8 |
.1.3.6.1.4.1.318.1.1.27.1.2
·
1 row entry
·
1 columns
A table of cooling unit level data.
An element of coolingUnitTable.
Indexes
coolingUnitTableIndex
| Column | Syntax | OID |
|---|---|---|
|
coolingUnitTableIndex
mandatory
The unit reference identifier for this table and all other table entries subordinate to coolingUnits.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.2.1.1 |
.1.3.6.1.4.1.318.1.1.27.1.3.2
·
1 row entry
·
3 columns
A table of unit reference information.
An element of coolingUnitAboutTable.
Indexes
coolingUnitTableIndex coolingUnitAboutTableIndex
| Column | Syntax | OID |
|---|---|---|
|
coolingUnitAboutTableIndex
mandatory
The static reference identifier for each table entry.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.3.2.1.1 |
|
coolingUnitAboutDescription
mandatory
A text description of the information presented in coolingUnitAboutValue.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.3.2.1.2 |
|
coolingUnitAboutValue
mandatory
The actual value of the current table entry.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.3.2.1.3 |
.1.3.6.1.4.1.318.1.1.27.1.4.1.2
·
1 row entry
·
5 columns
A table of analog unit status data.
An element of coolingUnitStatusAnalogTable.
Indexes
coolingUnitTableIndex coolingUnitStatusAnalogTableIndex
| Column | Syntax | OID |
|---|---|---|
|
coolingUnitStatusAnalogTableIndex
mandatory
The static reference identifier for each table entry.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.4.1.2.1.1 |
|
coolingUnitStatusAnalogDescription
mandatory
A text description of the information presented in coolingUnitStatusAnalogValue.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.4.1.2.1.2 |
|
coolingUnitStatusAnalogValue
mandatory
The scaled value of the current table entry (multiplied by coolingUnitStatusAnalogScale for integer presentation).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.4.1.2.1.3 |
|
coolingUnitStatusAnalogUnits
mandatory
The unit of measure by which coolingUnitStatusAnalogValue is expressed.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.4.1.2.1.4 |
|
coolingUnitStatusAnalogScale
mandatory
The factor by which coolingUnitStatusAnalogValue is expressed.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.4.1.2.1.5 |
.1.3.6.1.4.1.318.1.1.27.1.4.2.2
·
1 row entry
·
5 columns
A table of discrete unit status data.
An element of coolingUnitStatusDiscreteTable.
Indexes
coolingUnitTableIndex coolingUnitStatusDiscreteTableIndex
| Column | Syntax | OID |
|---|---|---|
|
coolingUnitStatusDiscreteTableIndex
mandatory
The static reference identifier for each table entry.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.4.2.2.1.1 |
|
coolingUnitStatusDiscreteDescription
mandatory
A text description of the information presented in this table's 'value' OIDs.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.4.2.2.1.2 |
|
coolingUnitStatusDiscreteValueAsString
mandatory
The actual value of the current table entry expressed as a string.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.4.2.2.1.3 |
|
coolingUnitStatusDiscreteValueAsInteger
mandatory
The actual value of the current table entry expressed as an integer value.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.4.2.2.1.4 |
|
coolingUnitStatusDiscreteIntegerReferenceKey
mandatory
A complete listing of all possible coolingUnitStatusDiscreteValueAsInteger values paired with their identifying strings.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.4.2.2.1.5 |
.1.3.6.1.4.1.318.1.1.27.1.5.1.2
·
1 row entry
·
8 columns
A table of analog unit configuration data.
An element of coolingUnitConfigurationAnalogTable.
Indexes
coolingUnitTableIndex coolingUnitConfigurationAnalogTableIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
coolingUnitConfigurationAnalogTableIndex
mandatory
The static reference identifier for each table entry.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.5.1.2.1.1 |
||||
|
coolingUnitConfigurationAnalogDescription
mandatory
A text description of the information presented in coolingUnitConfigurationAnalogValue.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.5.1.2.1.2 |
||||
|
coolingUnitConfigurationAnalogValue
mandatory
The scaled value of the current table entry (multiplied by coolingUnitConfigurationAnalogScale for integer presentation).
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.5.1.2.1.3 |
||||
|
coolingUnitConfigurationAnalogUnits
mandatory
The unit of measure by which coolingUnitConfigurationAnalogValue is expressed.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.5.1.2.1.4 |
||||
|
coolingUnitConfigurationAnalogScale
mandatory
The factor by which coolingUnitConfigurationAnalogValue is expressed.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.5.1.2.1.5 |
||||
|
coolingUnitConfigurationAnalogAccess
mandatory
A description of available access to coolingUnitConfigurationAnalogValue via SNMP client.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.27.1.5.1.2.1.6 |
||||
|
coolingUnitConfigurationAnalogMinimum
mandatory
The minimum possible value of coolingUnitConfigurationAnalogValue.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.5.1.2.1.7 |
||||
|
coolingUnitConfigurationAnalogMaximum
mandatory
The maximum possible value of coolingUnitConfigurationAnalogValue.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.5.1.2.1.8 |
.1.3.6.1.4.1.318.1.1.27.1.5.2.2
·
1 row entry
·
6 columns
A table of discrete unit configuration data.
An element of coolingUnitConfigurationDiscreteTable.
Indexes
coolingUnitTableIndex coolingUnitConfigurationDiscreteTableIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
coolingUnitConfigurationDiscreteTableIndex
mandatory
The static reference identifier for each table entry.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.5.2.2.1.1 |
||||
|
coolingUnitConfigurationDiscreteDescription
mandatory
A text description of the information presented in this table's 'value' OIDs.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.5.2.2.1.2 |
||||
|
coolingUnitConfigurationDiscreteValueAsString
mandatory
The actual value of the current table entry expressed as a string.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.5.2.2.1.3 |
||||
|
coolingUnitConfigurationDiscreteValueAsInteger
mandatory
The actual value of the current table entry expressed as an integer value.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.5.2.2.1.4 |
||||
|
coolingUnitConfigurationDiscreteIntegerReferenceKey
mandatory
A complete listing of all possible coolingUnitConfigurationDiscreteValueAsInteger values paired with their identifying strings.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.5.2.2.1.5 |
||||
|
coolingUnitConfigurationDiscreteAccess
mandatory
A description of available access to coolingUnitConfigurationDiscreteValueAsInteger via SNMP client.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.27.1.5.2.2.1.6 |
.1.3.6.1.4.1.318.1.1.27.1.5.3.2
·
1 row entry
·
5 columns
A table of unit configuration strings.
An element of coolingUnitConfigurationStringTable.
Indexes
coolingUnitTableIndex coolingUnitConfigurationStringTableIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
coolingUnitConfigurationStringTableIndex
mandatory
The static reference identifier for each table entry.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.5.3.2.1.1 |
||||
|
coolingUnitConfigurationStringDescription
mandatory
A text description of the information presented in coolingUnitConfigurationStringValue.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.5.3.2.1.2 |
||||
|
coolingUnitConfigurationStringValue
mandatory
The actual value of the current table entry.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.5.3.2.1.3 |
||||
|
coolingUnitConfigurationStringMaxLength
mandatory
The maximum string length supported by coolingUnitConfigurationStringValue.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.5.3.2.1.4 |
||||
|
coolingUnitConfigurationStringAccess
mandatory
A description of available access to coolingUnitConfigurationStringValue via SNMP client.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.27.1.5.3.2.1.5 |
.1.3.6.1.4.1.318.1.1.27.1.6.1.2
·
1 row entry
·
5 columns
A table of secondary analog data for the cooling unit or one of its components.
An element of coolingUnitExtendedAnalogTable.
Indexes
coolingUnitTableIndex coolingUnitExtendedAnalogTableIndex
| Column | Syntax | OID |
|---|---|---|
|
coolingUnitExtendedAnalogTableIndex
mandatory
The static reference identifier for each table entry. This identifier may reference different table entries in different unit models.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.6.1.2.1.1 |
|
coolingUnitExtendedAnalogDescription
mandatory
A text description of the information presented in coolingUnitExtendedAnalogValue.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.6.1.2.1.2 |
|
coolingUnitExtendedAnalogValue
mandatory
The scaled value of the current table entry (multiplied by coolingUnitExtendedAnalogScale for integer presentation).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.6.1.2.1.3 |
|
coolingUnitExtendedAnalogUnits
mandatory
The unit of measure by which coolingUnitExtendedAnalogValue is expressed.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.6.1.2.1.4 |
|
coolingUnitExtendedAnalogScale
mandatory
The factor by which coolingUnitExtendedAnalogValue is expressed.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.6.1.2.1.5 |
.1.3.6.1.4.1.318.1.1.27.1.6.2.2
·
1 row entry
·
5 columns
A table of secondary discrete cooling unit data.
An element of coolingUnitExtendedDiscreteTable.
Indexes
coolingUnitTableIndex coolingUnitExtendedDiscreteTableIndex
| Column | Syntax | OID |
|---|---|---|
|
coolingUnitExtendedDiscreteTableIndex
mandatory
The static reference identifier for each table entry. This identifier may reference different table entries in different unit models.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.6.2.2.1.1 |
|
coolingUnitExtendedDiscreteDescription
mandatory
A text description of the information presented in this table's 'value' OIDs.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.6.2.2.1.2 |
|
coolingUnitExtendedDiscreteValueAsString
mandatory
The actual value of the current table entry expressed as a string.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.6.2.2.1.3 |
|
coolingUnitExtendedDiscreteValueAsInteger
mandatory
The actual value of the current table entry expressed as an integer value.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.6.2.2.1.4 |
|
coolingUnitExtendedDiscreteIntegerReferenceKey
mandatory
A complete listing of all possible coolingUnitExtendedDiscreteValueAsInteger values paired with their identifying strings.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.6.2.2.1.5 |
.1.3.6.1.4.1.318.1.1.27.1.6.3.2
·
1 row entry
·
3 columns
A table of secondary unit reference data.
An element of coolingUnitExtendedStringTable.
Indexes
coolingUnitTableIndex coolingUnitExtendedStringTableIndex
| Column | Syntax | OID |
|---|---|---|
|
coolingUnitExtendedStringTableIndex
mandatory
The static reference identifier for each table entry. This identifier may reference different table entries in different unit models.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.318.1.1.27.1.6.3.2.1.1 |
|
coolingUnitExtendedStringDescription
mandatory
A text description of the information presented in coolingUnitExtendedStringValue.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.6.3.2.1.2 |
|
coolingUnitExtendedStringValue
mandatory
The actual value of the current table entry.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.27.1.6.3.2.1.3 |
.1.3.6.1.4.1.318.1.1.28.3.1.2
·
1 row entry
·
56 columns
A list of input meter entries.
An entry containing information applicable to a
particular input meter.
particular input meter.
Indexes
pmmInputMeterIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pmmInputMeterIndex
mandatory
The input meter identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.1 |
||||||||||||||||||||
|
pmmInputFrequency
mandatory
The input frequency in tenths of Hertz.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.2 |
||||||||||||||||||||
|
pmmInputTotalActivePower
mandatory
Shows the total input active power in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.3 |
||||||||||||||||||||
|
pmmInputTotalApparentPower
mandatory
Shows the total input apparent power in tenths of kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.4 |
||||||||||||||||||||
|
pmmInputTotalPowerFactor
mandatory
Indicates the total power factor. A value of 100 representing
a unity power factor (1.00). Specified in hundredths. Returns -255 if unsupported |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.5 |
||||||||||||||||||||
|
pmmInputActiveEnergyDelivered
mandatory
Shows the input active energy delivered in tenths of kWh.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.6 |
||||||||||||||||||||
|
pmmInputActiveEnergyReceived
mandatory
Shows the input active energy received in tenths of kWh.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.7 |
||||||||||||||||||||
|
pmmInputApparentEnergyDelivered
mandatory
Shows the input apparent energy delivered in tenths of kVAh.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.8 |
||||||||||||||||||||
|
pmmInputApparentEnergyReceived
mandatory
Shows the input apparent energy received in tenths of kVAh.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.9 |
||||||||||||||||||||
|
pmmInputFrequencyDeviation
mandatory
Displays the input frequency deviation in Hertz.
Threshold write returns as unsuccessful if one of the breaker threshold groups does not meet conditions. In this case, read the thresholds to know which threshold group… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.10 |
||||||||||||||||||||
|
pmmInputPowerFactorDeviation
mandatory
Displays the input power factor deviation. Specified in tenths.
A value of zero indicates that the threshold is disabled. Returns -1 if unsupported. Threshold write returns as unsuccessful if one of the breaker threshol… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.11 |
||||||||||||||||||||
|
pmmInputMinVoltThreshold
mandatory
Threshold below which an input minimum voltage condition
will be generated. Specified as percent deviation from nominal voltage represented in the OID pmmDeviceNominalInputVoltage. A value of zero indicates that the thr… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.12 |
||||||||||||||||||||
|
pmmInputLowVoltThreshold
mandatory
Threshold below which an input low voltage condition
will be generated. Specified as percent deviation from nominal voltage represented in the OID pmmDeviceNominalInputVoltage. A value of zero indicates that the thresho… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.13 |
||||||||||||||||||||
|
pmmInputHighVoltThreshold
mandatory
Threshold above which an input high voltage condition
will be generated. Specified as percent deviation from nominal voltage represented in the OID pmmDeviceNominalInputVoltage. A value of zero indicates that the thresh… |
Integer32r/w Constraints: range: 0-120 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.14 |
||||||||||||||||||||
|
pmmInputMaxVoltThreshold
mandatory
Threshold above which an input maximum voltage condition
will be generated. Specified as percent deviation from nominal voltage represented in the OID pmmDeviceNominalInputVoltage. A value of zero indicates that the thr… |
Integer32r/w Constraints: range: 0-120 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.15 |
||||||||||||||||||||
|
pmmInputMinCurrentThreshold
mandatory
Threshold below which an input minimum current condition will be generated.
Specified as a percent of the panel breaker rating. A value of zero indicates that the threshold is disabled. Threshold write returns as unsucc… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.16 |
||||||||||||||||||||
|
pmmInputLowCurrentThreshold
mandatory
Threshold below which an input low current condition will be generated.
Specified as a percent of the panel breaker rating. A value of zero indicates that the threshold is disabled. Threshold write returns as unsuccessf… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.17 |
||||||||||||||||||||
|
pmmInputHighCurrentThreshold
mandatory
Threshold above which an input high current condition will be generated.
Specified as a percent of the panel breaker rating. A value of zero indicates that the threshold is disabled. Threshold write returns as unsuccess… |
Integer32r/w Constraints: range: 0-110 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.18 |
||||||||||||||||||||
|
pmmInputMaxCurrentThreshold
mandatory
Threshold above which an input maximum current condition will be generated.
Specified as a percent of the panel breaker rating. A value of zero indicates that the threshold is disabled. Threshold write returns as unsucc… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.19 |
||||||||||||||||||||
|
pmmInputMinApparentPowerThreshold
mandatory
Threshold below which an input minimum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating. A value of zero indicates that the threshold is disabled. Threshold write re… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.20 |
||||||||||||||||||||
|
pmmInputMaxApparentPowerThreshold
mandatory
Threshold above which an input maximum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating. A value of zero indicates that the threshold is disabled. Threshold write re… |
Integer32r/w Constraints: range: 0-110 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.21 |
||||||||||||||||||||
|
pmmInputOverActivePowerThreshold
mandatory
Threshold above which an input over active power condition will be generated.
Specified as a percent deviation from nominal power rating. A value of zero indicates that the threshold is disabled. Threshold write returns… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.22 |
||||||||||||||||||||
|
pmmInputBreakerState
mandatory
This value indicates the current state of input breaker.
1 will indicate open, 2 will indicate closed, 3 will indicate unknown. Returns -1 if unsupported or failed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.23 |
||||||||||||||||||||
|
pmmInputBreakerOpenAlarm
mandatory
Breaker open alarm status.
1 will indicate enabled, 2 will indicate disabled, 3 will indicate unknown. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.24 |
||||||||||||||||||||
|
pmmInputAverageCurrent
mandatory
Input Average current. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.25 |
||||||||||||||||||||
|
pmmInputNeturalCurrent
mandatory
Input Neutral current. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.26 |
||||||||||||||||||||
|
pmmInputMaxInstantaneousNeutralCurrent
mandatory
Input maximum instantaneous neutral current. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.27 |
||||||||||||||||||||
|
pmmInputAverageCurrentTHD
mandatory
Input average harmonic distortions.
Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.28 |
||||||||||||||||||||
|
pmmInputAverageVoltageLtoL
mandatory
Input Average Line to Line voltage. Measured in tenths of Volts.
Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.29 |
||||||||||||||||||||
|
pmmInputAverageVoltageLtoN
mandatory
Input Average Line to Neutral voltage. Measured in tenths of Volts.
Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.30 |
||||||||||||||||||||
|
pmmInputLoad
mandatory
Total load of input breaker in percentage. Measured in tenths of percent.
Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.31 |
||||||||||||||||||||
|
pmmInputMeterFirmwareVersion
mandatory
Shows the input meter firmware version.
Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.32 |
||||||||||||||||||||
|
pmmInputMeterSerialNumber
mandatory
Shows the input meter serial number.
Returns -1 if unsupported or failed. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.33 |
||||||||||||||||||||
|
pmmInputEnergyUsageAccumulatedTotal
mandatory
Shows the total accumulated input energy usage in kWh.
Measured in tenths of kWh. Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.34 |
||||||||||||||||||||
|
pmmInputPhaseLoss
mandatory
Threshold below which an input phase loss condition will be generated.
Specified as a percent deviation from phase to neutral nominal voltage. A value of zero indicates that the threshold is disabled. Returns -1 if unsu… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.35 |
||||||||||||||||||||
|
pmmInputBreakerCTSize
mandatory
Shows the input breaker CT size.
Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.36 |
||||||||||||||||||||
|
pmmInputBreakerRating
mandatory
Shows the input breaker rating in Amps(A).
Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.37 |
||||||||||||||||||||
|
pmmInputKWHResetDate
mandatory
The date that the kWh usage was reset, in the format mm/dd/yyyy.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.38 |
||||||||||||||||||||
|
pmmInputAlarmGeneration
mandatory
Alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.39 |
||||||||||||||||||||
|
pmmInputVoltageMaximumAlarm
mandatory
Voltage maximum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.40 |
||||||||||||||||||||
|
pmmInputVoltageHighAlarm
mandatory
Voltage high alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.41 |
||||||||||||||||||||
|
pmmInputVoltageLowAlarm
mandatory
Voltage low alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.42 |
||||||||||||||||||||
|
pmmInputVoltageMinimumAlarm
mandatory
Voltage minimum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.43 |
||||||||||||||||||||
|
pmmInputCurrentMaximumAlarm
mandatory
Current maximum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.44 |
||||||||||||||||||||
|
pmmInputCurrentHighAlarm
mandatory
Current high alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.45 |
||||||||||||||||||||
|
pmmInputCurrentLowAlarm
mandatory
Current low alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.46 |
||||||||||||||||||||
|
pmmInputCurrentMinimumAlarm
mandatory
Current minimum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.47 |
||||||||||||||||||||
|
pmmInputApparentPowerMaximumAlarm
mandatory
Apparent Power maximum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.48 |
||||||||||||||||||||
|
pmmInputApparentPowerMinimumAlarm
mandatory
Apparent Power minimum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.49 |
||||||||||||||||||||
|
pmmInputKWOverAlarm
mandatory
Over active power alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.50 |
||||||||||||||||||||
|
pmmInputPhaseLossAlarm
mandatory
Phase loss alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.51 |
||||||||||||||||||||
|
pmmInputPowerFactorTotalAlarm
mandatory
Total power factor alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.52 |
||||||||||||||||||||
|
pmmInputFrequencyDeviationAlarm
mandatory
Frequency deviation alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.53 |
||||||||||||||||||||
|
pmmInputNeutralOverCurrentAlarm
mandatory
Neutral Overcurrent alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.54 |
||||||||||||||||||||
|
pmmInputNeutralOverCurrentThreshold
mandatory
Threshold above which an input neutral overcurrent condition will be generated.
Specified as a percent deviation from nominal current. A value of zero indicates that the threshold is disabled. Returns -1 if unsupported … |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.55 |
||||||||||||||||||||
|
pmmInputAveragePowerFactor
mandatory
Indicates the average power factor. A value of 100 representing
a unity power factor (1.00). Specified in hundredths. Returns -255 if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.56 |
.1.3.6.1.4.1.318.1.1.28.3.1.3
·
1 row entry
·
13 columns
A list of input table entries. The number of entries is given by the value of pmmInputMeterTableSize OID.
An entry containing information applicable to a
particular input phase.
particular input phase.
Indexes
pmmInputMeterNum pmmInputPhase
| Column | Syntax | OID |
|---|---|---|
|
pmmInputMeterNum
mandatory
The input meter identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.1 |
|
pmmInputPhase
mandatory
Input phase index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.2 |
|
pmmInputVoltageLtoL
mandatory
Line-to-line input voltage available.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.3 |
|
pmmInputVoltageLtoN
mandatory
Line-to-neutral input voltage available.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.4 |
|
pmmInputPhaseCurrent
mandatory
Input current per phase. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.5 |
|
pmmInputActivePower
mandatory
Input active power per phase. Measured in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.6 |
|
pmmInputApparentPower
mandatory
Input apparent power per phase. Measured in tenths of kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.7 |
|
pmmInputPowerFactor
mandatory
Indicates the power factor of the input per phase.
A value of 100 representing a unity power factor (1.00). Specified in hundredths. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.8 |
|
pmmInputMaxInstantaneousCurrent
mandatory
Input maximum phase instantaneous current. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.9 |
|
pmmInputPhaseAngle
mandatory
Current phase Angle. Measured in tenths of decimal
Returns -255 if unsupported |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.10 |
|
pmmInputTHDLtoL
mandatory
Input harmonic distortions line to line for the present input voltage.
Measured in tenths. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.11 |
|
pmmInputTHDLtoN
mandatory
Input harmonic distortions line to neutral for the present input voltage.
Measured in tenths. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.12 |
|
pmmInputCurrentTHD
mandatory
Input harmonic distortions for each phase, for the present input current.
Returns -1 if unsupported or failed. Specified in tenths. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.1.3.1.13 |
.1.3.6.1.4.1.318.1.1.28.3.2.2
·
1 row entry
·
25 columns
A list of output meter entries.
An entry containing information applicable to a
particular output meter.
particular output meter.
Indexes
pmmOutputMeterIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pmmOutputMeterIndex
mandatory
The output meter identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.1 |
||||||||||||||||||||
|
pmmOutputFrequency
mandatory
The output frequency in tenths of Hertz.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.2 |
||||||||||||||||||||
|
pmmOutputTotalActivePower
mandatory
Shows the total output active power in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.3 |
||||||||||||||||||||
|
pmmOutputTotalApparentPower
mandatory
Shows the total output apparent power in tenths of kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.4 |
||||||||||||||||||||
|
pmmOutputTotalPowerFactor
mandatory
Indicates the total power factor. A value of 100 representing
a unity power factor (1.00). Specified in hundredths. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.5 |
||||||||||||||||||||
|
pmmOutputActiveEnergyDelivered
mandatory
Shows the output active energy delivered in tenths of kWh.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.6 |
||||||||||||||||||||
|
pmmOutputActiveEnergyReceived
mandatory
Shows the output active energy received in tenths of kWh.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.7 |
||||||||||||||||||||
|
pmmOutputApparentEnergyDelivered
mandatory
Shows the output apparent energy delivered in tenths of kVAh.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.8 |
||||||||||||||||||||
|
pmmOutputApparentEnergyReceived
mandatory
Shows the output apparent energy received in tenths of kVAh.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.9 |
||||||||||||||||||||
|
pmmOutputFrequencyDeviation
mandatory
Shows the output frequency deviation in Hertz.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.10 |
||||||||||||||||||||
|
pmmOutputPowerFactorDeviation
mandatory
Shows the output power factor deviation. Specified in tenths.
A value of zero indicates that the threshold is disabled. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.11 |
||||||||||||||||||||
|
pmmOutputMinVoltThreshold
mandatory
Threshold below which an output minimum voltage condition
will be generated. Specified as percent deviation from nominal voltage represented in the OID pmmDeviceNominalOutputVoltage. A value of zero indicates that the t… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.12 |
||||||||||||||||||||
|
pmmOutputLowVoltThreshold
mandatory
Threshold below which an output low voltage condition
will be generated. Specified as percent deviation from nominal voltage represented in the OID pmmDeviceNominalOutputVoltage. A value of zero indicates that the thres… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.13 |
||||||||||||||||||||
|
pmmOutputHighVoltThreshold
mandatory
Threshold above which an output high voltage condition
will be generated. Specified as percent deviation from nominal voltage represented in the OID pmmDeviceNominalOutputVoltage. A value of zero indicates that the thre… |
Integer32r/w Constraints: range: 0-120 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.14 |
||||||||||||||||||||
|
pmmOutputMaxVoltThreshold
mandatory
Threshold above which an output maximum voltage condition
will be generated. Specified as percent deviation from nominal voltage represented in the OID pmmDeviceNominalOutputVoltage. A value of zero indicates that the t… |
Integer32r/w Constraints: range: 0-120 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.15 |
||||||||||||||||||||
|
pmmOutputMinCurrentThreshold
mandatory
Threshold below which an output minimum current condition will be generated.
Specified as a percent of the panel breaker rating. A value of zero indicates that the threshold is disabled. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.16 |
||||||||||||||||||||
|
pmmOutputLowCurrentThreshold
mandatory
Threshold below which an output low current condition will be generated.
Specified as a percent of the panel breaker rating. A value of zero indicates that the threshold is disabled. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.17 |
||||||||||||||||||||
|
pmmOutputHighCurrentThreshold
mandatory
Threshold above which an output high current condition will be generated.
Specified as a percent of the panel breaker rating. A value of zero indicates that the threshold is disabled. |
Integer32r/w Constraints: range: 0-110 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.18 |
||||||||||||||||||||
|
pmmOutputMaxCurrentThreshold
mandatory
Threshold above which an output maximum current condition will be generated.
Specified as a percent of the panel breaker rating. A value of zero indicates that the threshold is disabled. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.19 |
||||||||||||||||||||
|
pmmOutputMinApparentPowerThreshold
mandatory
Threshold below which an output minimum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating. A value of zero indicates that the threshold is disabled. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.20 |
||||||||||||||||||||
|
pmmOutputMaxApparentPowerThreshold
mandatory
Threshold above which an output maximum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating. A value of zero indicates that the threshold is disabled. |
Integer32r/w Constraints: range: 0-110 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.21 |
||||||||||||||||||||
|
pmmOutputOverActivePowerThreshold
mandatory
Threshold above which an output over active power condition will be generated.
Specified as a percent deviation from nominal power rating. A value of zero indicates that the threshold is disabled. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.22 |
||||||||||||||||||||
|
pmmOutputPhaseLossThreshold
mandatory
Threshold below which an output phase loss condition will be generated.
Specified as a percent deviation from nominal voltage represented in the OID pmmDeviceNominalOutputVoltage. A value of zero indicates that the thre… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.23 |
||||||||||||||||||||
|
pmmOutputBreakerState
mandatory
This value indicates the current state of output breaker.
1 will indicate open, 2 will indicate closed, 3 will indicate unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.24 |
||||||||||||||||||||
|
pmmOutputBreakerOpenAlarm
mandatory
Breaker open alarm status.
1 will indicate enabled, 2 will indicate disabled, 3 will indicate unknown. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.2.2.1.25 |
.1.3.6.1.4.1.318.1.1.28.3.2.3
·
1 row entry
·
8 columns
A list of output table entries. The number of entries is given by the value of pmmOutputMeterTableSize OID.
An entry containing information applicable to a
particular output phase.
particular output phase.
Indexes
pmmOutputMeterNum pmmOutputPhase
| Column | Syntax | OID |
|---|---|---|
|
pmmOutputMeterNum
mandatory
The output meter identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.3.1.1 |
|
pmmOutputPhase
mandatory
Output phase index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.3.1.2 |
|
pmmOutputVoltageLtoL
mandatory
Line-to-line output voltage available.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.3.1.3 |
|
pmmOutputVoltageLtoN
mandatory
Line-to-neutral output voltage available.
Measured in tenths of Volts. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.3.1.4 |
|
pmmOutputPhaseCurrent
mandatory
Load current per phase. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.3.1.5 |
|
pmmOutputActivePower
mandatory
Output power per phase. Measured in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.3.1.6 |
|
pmmOutputApparentPower
mandatory
Output power per phase. Measured in tenths of kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.3.1.7 |
|
pmmOutputPowerFactor
mandatory
Indicates the power factor of the output per phase.
A value of 100 representing a unity power factor (1.00). Specified in hundredths. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.2.3.1.8 |
.1.3.6.1.4.1.318.1.1.28.3.3.3
·
1 row entry
·
41 columns
A list of branch breaker table entries. The number of entries is contained in the pmmBranchBreakerTableSize OID.
An entry containing information applicable to a
particular branch breaker (panel/circuit position).
particular branch breaker (panel/circuit position).
Indexes
pmmBranchCircuitMeterIndex pmmBranchCircuitIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pmmBranchCircuitMeterIndex
mandatory
Index of branch circuit meter in the table.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.1 |
||||||
|
pmmBranchCircuitIndex
mandatory
The branch circuit index.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.2 |
||||||
|
pmmBranchCircuitNumberOfPoles
mandatory
The number of poles.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.3 |
||||||
|
pmmBranchCircuitPhase
mandatory
The phase associated with branch circuit.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.4 |
||||||
|
pmmBranchCircuitBreakerIdentifier
mandatory
The branch circuit identifier.
Returns (-1) if not supported. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.5 |
||||||
|
pmmBranchCircuitLoadIdentifier
mandatory
Identifies the name or location of the branch circuit load.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.6 |
||||||
|
pmmBranchCircuitCurrent
mandatory
The branch circuit current Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.7 |
||||||
|
pmmBranchCircuitBreakerRating
mandatory
The rating of the branch circuit breaker in Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.8 |
||||||
|
pmmBranchCircuitTotalActivePower
mandatory
Branch circuit total active power. Measured in tenths
of kW. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.9 |
||||||
|
pmmBranchCircuitTotalApparentPower
mandatory
Branch circuit total apparent power. Measured in
tenths of kVA. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.10 |
||||||
|
pmmBranchCircuitEnergyUsage
mandatory
Indicates the accumulated energy usage per phase in tenths of kWh.
Displayed as 0 when not available or no energy used. |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.11 |
||||||
|
pmmBranchCircuitEnergyUsageResetDate
mandatory
The date that the kWh usage was reset, in the format mm/dd/yyyy.
The default energy usage reset date is Not Available. Displayed as NA when breaker is not installed or if not first pole of breaker. |
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.12 |
||||||
|
pmmBranchCircuitTotalPowerFactor
mandatory
Indicates the total power factor of the branch circuit.
A value of 100 representing a unity power factor (1.00) Specified in hundredths. Returns -1 if unsupported. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.13 |
||||||
|
pmmBranchCircuitBreakerState
mandatory
This value indicates the current state of branch
circuit breaker. 1 will indicate open, 2 will indicate closed, 3 will indicate unknown. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.14 |
||||||
|
pmmBranchCircuitMinCurrentThreshold
mandatory
Threshold below which a branch circuit minimum current
condition will be generated. Specified as a percentage of the branch breaker rating represented in the OID pmmBranchCircuitBreakerRating A value of zero indicates t… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.15 |
||||||
|
pmmBranchCircuitLowCurrentThreshold
mandatory
Threshold below which a branch circuit low current
condition will be generated. Specified as a percentage of the branch breaker rating represented in the OID pmmBranchCircuitBreakerRating A value of zero indicates that … |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.16 |
||||||
|
pmmBranchCircuitHighCurrentThreshold
mandatory
Threshold above which a branch circuit high current
condition will be generated. Specified as a percentage of the branch breaker rating represented in the OID pmmBranchCircuitBreakerRating A value of zero indicates that… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.17 |
||||||
|
pmmBranchCircuitMaxCurrentThreshold
mandatory
Threshold above which a branch circuit maximum current
condition will be generated. Specified as a percentage of the branch breaker rating represented in the OID pmmBranchCircuitBreakerRating A value of zero indicates t… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.18 |
||||||
|
pmmBranchCircuitMinApparentPowerThreshold
mandatory
Threshold below which a branch circuit minimum apparent
power condition will be generated. Specified as a percent of the branch breaker apparent power rating. A value of zero indicates that the threshold is disabled. Th… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.19 |
||||||
|
pmmBranchCircuitMaxApparentPowerThreshold
mandatory
Threshold above which a branch circuit maximum apparent
power condition will be generated. Specified as a percent of the branch breaker apparent power rating. A value of zero indicates that the threshold is disabled. Th… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.20 |
||||||
|
pmmBranchCircuitAlaramGeneration
mandatory
Alarm generation status.
1 will indicate enabled, 2 will indicate disabled, 3 will indicate unknown. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.21 |
||||||
|
pmmBranchCircuitBreakerOpenAlarm
mandatory
Breaker open alarm status.
1 will indicate enabled, 2 will indicate disabled, 3 will indicate unknown. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.22 |
||||||
|
pmmBranchCircuitBreakerAverageCurrent
mandatory
Average branch breaker current. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.23 |
||||||
|
pmmBranchCircuitMaxInstantaneousCurrentPhase
mandatory
Branch circuit maximum instantaneous current. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.24 |
||||||
|
pmmBranchCircuitBreakerMaxInstantaneousAverageCurrent
mandatory
Average branch breaker maximum instantaneous current. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.25 |
||||||
|
pmmBranchCircuitAngle
mandatory
Branch circuit phase angle. Measured in tenths of Decimal.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.26 |
||||||
|
pmmBranchCircuitActivePower
mandatory
Branch circuit Active power. Measured in tenths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.27 |
||||||
|
pmmBranchCircuitApparentPower
mandatory
Branch circuit apparent power. Measured in tenths of kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.28 |
||||||
|
pmmBranchCircuitBreakerEnergyTotalUsage
mandatory
Indicates the circuit Breaker total accumulated energy usage in tenths of kWh.
Displayed as 0 when not available or no energy used. |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.29 |
||||||
|
pmmBranchCircuitPowerFactor
mandatory
Indicates the power factor of the branch circuit.
A value of 100 representing a unity power factor (1.00) Specified in hundredths. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.30 |
||||||
|
pmmBranchCircuitTHD
mandatory
Branch circuit current harmonic distortion.
Specified in tenths of percent. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.31 |
||||||
|
pmmBranchCircuitBreakerTHD
mandatory
Average branch breaker current harmonic distortion.
Specified in tenths of percent. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.32 |
||||||
|
pmmBranchCircuitBreakerLoad
mandatory
Total load on the Breaker.
Measured in tenths of Amps. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.33 |
||||||
|
pmmBranchCircuitBranchNumber
mandatory
The branch number.
Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.34 |
||||||
|
pmmBranchCircuitChannelCTSize
mandatory
The branch CT Size.
Returns -1 if unsupported or failed. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.35 |
||||||
|
pmmBranchCircuitCurrentMaxAlarm
mandatory
Current maximum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.36 |
||||||
|
pmmBranchCircuitCurrentHighAlarm
mandatory
Current high alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.37 |
||||||
|
pmmBranchCircuitCurrentLowAlarm
mandatory
Current low alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.38 |
||||||
|
pmmBranchCircuitCurrentMinAlarm
mandatory
Current minimum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.39 |
||||||
|
pmmBranchCircuitApparentPowerMaxAlarm
mandatory
Apparent power maximum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.40 |
||||||
|
pmmBranchCircuitApparentPowerMinAlarm
mandatory
Apparent power minimum alarm generation status.
1 - enabled 2 - disabled 3 - unknown |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.3.3.1.41 |
.1.3.6.1.4.1.318.1.1.28.3.4.2
·
1 row entry
·
7 columns
A list of PMM site configurable entries.
An entry containing information applicable to a
particular site configuration.
particular site configuration.
Indexes
pmmSiteConfigIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmmSiteConfigIndex
mandatory
PMM site configuration identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.4.2.1.1 |
||||
|
pmmSiteConfigNominalPtoPVoltage
mandatory
The nominal input phase to phase voltage to the PMM. Measured in Volts,
line-to-line for a 3-wire (delta) service or line-to-neutral for a 4-wire (wye) service. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.4.2.1.2 |
||||
|
pmmSiteConfigNominalPtoNVoltage
mandatory
The nominal input phase to neutral voltage to the PMM. Measured in Volts,
line-to-line for a 3-wire (delta) service or line-to-neutral for a 4-wire (wye) service. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.4.2.1.3 |
||||
|
pmmSiteConfigNominalCurrent
mandatory
The nominal input current to the PMM. Measured in tenths of Amps.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.4.2.1.4 |
||||
|
pmmSiteConfigNominalFrequency
mandatory
The nominal input frequency to the PMM. Measured in tenths of Hertz.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.4.2.1.5 |
||||
|
pmmSiteConfigNominalApparentPower
mandatory
The nominal input apparent power to the PMM. Measured in tenths of kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.28.3.4.2.1.6 |
||||
|
pmmSiteConfigServiceType
mandatory
The type of utility input to the PMM. Either 3 wires (delta), or 4 wires (wye).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.28.3.4.2.1.7 |
.1.3.6.1.4.1.318.1.1.29.2.1
·
1 row entry
·
5 columns
A list of input table entries. The number of entries is given by the sum of the Charger input phases.
An entry containing information applicable to a
particular input phase.
particular input phase.
Indexes
chargerInputPhaseTableIndex
| Column | Syntax | OID |
|---|---|---|
|
chargerInputPhaseTableIndex
mandatory
The input identifier.
If not supported, return 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.29.2.1.1.1 |
|
chargerInputPhaseVoltage
mandatory
The input voltage in VAC, or -1 if it's unsupported
by this Charger. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.29.2.1.1.2 |
|
chargerInputPhaseMinVoltage
mandatory
The lowest input voltage to the Charger during the previous minute of operation, or -1 if it's unsupported
by this Charger. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.29.2.1.1.3 |
|
chargerInputPhaseMaxVoltage
mandatory
The highest input voltage to the Charger during the previous minute of operation, or -1 if it's unsupported
by this Charger. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.29.2.1.1.4 |
|
chargerInputPhaseCurrent
mandatory
The input current in 0.1 amperes, or -1 if it's
unsupported by this Charger. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.29.2.1.1.5 |
.1.3.6.1.4.1.318.1.1.30.2.1
·
1 row entry
·
12 columns
A table of Easy PDU status information
Status information from the Easy PDU being queried
Indexes
ePDUDeviceStatusIndex
| Column | Syntax | OID |
|---|---|---|
|
ePDUDeviceStatusIndex
mandatory
The index to the Easy PDU status table entry
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.1.1.1 |
|
ePDUDeviceStatusModule
mandatory
The user-defined Rack PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.1.1.2 |
|
ePDUDeviceStatusVersion
mandatory
The Easy PDU firmware and hardware version
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.30.2.1.1.3 |
|
ePDUDeviceStatusModelNumber
mandatory
The Easy PDU model number
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.30.2.1.1.4 |
|
ePDUDeviceStatusSerialNumber
mandatory
The Easy PDU serial number
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.30.2.1.1.5 |
|
ePDUDeviceStatusNumPhases
mandatory
The number of phases present in the Easy PDU
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.1.1.6 |
|
ePDUDeviceStatusActivePower
mandatory
Indicates the PDU Active Power. Units:1 Watt.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.1.1.7 |
|
ePDUDeviceStatusReactivePower
mandatory
Indicates the PDU Reactive Power. Units:1 Var.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.1.1.8 |
|
ePDUDeviceStatusApparentPower
mandatory
Indicates the PDU Apparent Power. Units:1 VA.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.1.1.9 |
|
ePDUDeviceStatusPowerFactor
mandatory
Indicates the PDU Power Factor. Units:0.1%.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.1.1.10 |
|
ePDUDeviceStatusEnergy
mandatory
Indicates the PDU Energy. Units:1 Wh.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.1.1.11 |
|
ePDUDeviceStatusFrequency
mandatory
Indicates the PDU Frequency. Units:0.001 Hz.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.1.1.12 |
.1.3.6.1.4.1.318.1.1.30.2.2
·
1 row entry
·
5 columns
A table of Easy PDU control data
Control data from Easy PDU being queried
Indexes
ePDUDeviceControlIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ePDUDeviceControlIndex
mandatory
The index to the Easy PDU control table entry
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.2.1.1 |
||||
|
ePDUDeviceControlModule
mandatory
The user-defined Easy PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.2.2.1.2 |
||||
|
ePDUDeviceControlReboot
mandatory
Setting this OID to reboot (1) will cause the device reboot immediately.
Getting this OID in models that support this feature will do nothing and return the noOperation(0) value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.30.2.2.1.3 |
||||
|
ePDUDeviceControlEnergyReset
mandatory
Setting this OID to reset (1) will cause the device energy meter value
to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(0) value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.30.2.2.1.4 |
||||
|
ePDUDeviceControlBeepAlarm
mandatory
User-defined Beep alarm, 1 for turn off Beep, 2 for turn on Beep.
Models that do not support this feature will respond to this OID with a value of -1. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.30.2.2.1.5 |
.1.3.6.1.4.1.318.1.1.30.4.1
·
1 row entry
·
7 columns
A table of Easy PDU phase configuration data
Configuration data from currently queried Easy PDU phase
Indexes
ePDUPhaseConfigIndex
| Column | Syntax | OID |
|---|---|---|
|
ePDUPhaseConfigIndex
mandatory
The index to the Easy PDU phase configuration table entry
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.1.1.1 |
|
ePDUPhaseConfigModule
mandatory
The user-defined Easy PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.1.1.2 |
|
ePDUPhaseConfigNumber
mandatory
The numeric phase ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.1.1.3 |
|
ePDUPhaseConfigOverVoltageThreshold
mandatory
User-defined Phase Over Voltage alarm threshold. Units:0.1 V.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.1.1.4 |
|
ePDUPhaseConfigLowVoltageThreshold
mandatory
User-defined Phase Low Voltage alarm threshold. Units:0.1 V.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.1.1.5 |
|
ePDUPhaseConfigOverCurrentThreshold
mandatory
User-defined Phase Over Current alarm threshold. Units:0.01 A.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.1.1.6 |
|
ePDUPhaseConfigLowCurrentThreshold
mandatory
User-defined Phase Low Current alarm threshold. Units:0.01 A.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.1.1.7 |
.1.3.6.1.4.1.318.1.1.30.4.2
·
1 row entry
·
10 columns
A table of Rack PDU phase status data
Status data from currently queried Easy PDU phase
Indexes
ePDUPhaseStatusIndex
| Column | Syntax | OID |
|---|---|---|
|
ePDUPhaseStatusIndex
mandatory
The index to the Easy PDU phase configuration table entry
|
Integer32 Constraints: range: 1-12 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.1 |
|
ePDUPhaseStatusModule
mandatory
The user-defined Easy PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.2 |
|
ePDUPhaseStatusNumber
mandatory
The numeric phase ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.3 |
|
ePDUPhaseStatusVoltage
mandatory
Indicates the Phase Voltage. Units:0.1 V
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.4 |
|
ePDUPhaseStatusCurrent
mandatory
Indicates the Phase Current. Units:0.01 A
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.5 |
|
ePDUPhaseStatusActivePower
mandatory
Indicates the Phase Active Power. Units:1 Watt
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.6 |
|
ePDUPhaseStatusReactivePower
mandatory
Indicates the Phase Reactive Power. Units:1 Var.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.7 |
|
ePDUPhaseStatusApparentPower
mandatory
Indicates the Phase Apparent Power. Units:1 VA.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.8 |
|
ePDUPhaseStatusPowerFactor
mandatory
Indicates the Phase Power Factor. Units:0.1%
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.9 |
|
ePDUPhaseStatusEnergy
mandatory
Indicates the Phase Energy. Units:1 Wh
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.4.2.1.10 |
.1.3.6.1.4.1.318.1.1.30.6.1
·
1 row entry
·
4 columns
The number of switched outlets on connected Rack PDUs
Switched Outlet status from currently queried
Easy PDU switched outlet
Easy PDU switched outlet
Indexes
ePDUOutletStatusIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ePDUOutletStatusIndex
mandatory
The index to the Easy PDU switched outlet status information table entry.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Constraints: range: 1-128 |
.1.3.6.1.4.1.318.1.1.30.6.1.1.1 |
||||
|
ePDUOutletStatusModule
mandatory
The user-defined Easy PDU numeric ID.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.6.1.1.2 |
||||
|
ePDUOutletStatusNumber
mandatory
The numeric switched outlet ID.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.6.1.1.3 |
||||
|
ePDUOutletStatusState
mandatory
Indicates the present switch state of the Easy PDU switched outlet being queried.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.30.6.1.1.4 |
.1.3.6.1.4.1.318.1.1.30.6.2
·
1 row entry
·
4 columns
A table of Easy PDU switched outlet control data
Control data for currently queried Easy PDU switched outlet
Indexes
ePDUOutletControlIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
ePDUOutletControlIndex
mandatory
The index to the Easy PDU switched outlet configuration table entry.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Constraints: range: 1-128 |
.1.3.6.1.4.1.318.1.1.30.6.2.1.1 |
||||||
|
ePDUOutletControlModule
mandatory
The user-defined Easy PDU numeric ID.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.6.2.1.2 |
||||||
|
ePDUOutletControlNumber
mandatory
The numeric switched outlet ID.
Models that do not support this feature, will respond to this OID with a value of notSupported (-1). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.6.2.1.3 |
||||||
|
ePDUOutletControlCommand
mandatory
Getting this variable will return the outlet state. If
the outlet is on, the immediateOn (1) value will be returned. If the outlet is off, the immediateOff (2) value will be returned. If the state of the outlet cannot b… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.30.6.2.1.4 |
.1.3.6.1.4.1.318.1.1.30.8.1
·
1 row entry
·
6 columns
A table of temperature-humidity sensor configuration data
Configuration data from temperature-humidity sensor being queried
Indexes
ePDUSensorConfigIndex
| Column | Syntax | OID |
|---|---|---|
|
ePDUSensorConfigIndex
mandatory
The index to the temperature-humidity sensor configuration data table entry
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.8.1.1.1 |
|
ePDUSensorConfigModule
mandatory
The user-defined Easy PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.8.1.1.2 |
|
ePDUSensorConfigTempMaxThreshold
mandatory
User-defined Max Temperature alarm threshold. Units: 0.1 degrees Celsius.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.8.1.1.3 |
|
ePDUSensorConfigTempMinThreshold
mandatory
User-defined Min Temperature alarm threshold. Units: 0.1 degrees Celsius.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.8.1.1.4 |
|
ePDUSensorConfigHumidityMaxThreshold
mandatory
User-defined Max Humidity alarm threshold. Units: 0.1% relative humidity.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.8.1.1.5 |
|
ePDUSensorConfigHumidityMinThreshold
mandatory
User-defined Min Humidity alarm threshold. Units: 0.1% relative humidity.
Models that do not support this feature will respond to this OID with a value of -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.8.1.1.6 |
.1.3.6.1.4.1.318.1.1.30.8.2
·
1 row entry
·
4 columns
A table of temperature-humidity sensor status data
Status information from temperature-humidity sensor being queried
Indexes
ePDUSensorStatusIndex
| Column | Syntax | OID |
|---|---|---|
|
ePDUSensorStatusIndex
mandatory
The index to the temperature-humidity status data table entry
|
Integer32 Constraints: range: 1-4 |
.1.3.6.1.4.1.318.1.1.30.8.2.1.1 |
|
ePDUSensorStatusModule
mandatory
The user-defined Easy PDU numeric ID
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.8.2.1.2 |
|
ePDUSensorStatusTemperature
mandatory
Sensor temperature reading in tenths of degrees Celsius.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.8.2.1.3 |
|
ePDUSensorStatusHumidity
mandatory
Sensor humidity reading in 0.1 percent relative humidity.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.30.8.2.1.4 |
.1.3.6.1.4.1.318.1.1.31.2.2.1
·
1 row entry
·
2 columns
A list of UPS input table entries. The number of entries is given by the value of mdcUpsNumUnits.
An entry containing information applicable to a
particular input of UPS.
particular input of UPS.
Indexes
mdcUpsInputTableIndex
| Column | Syntax | OID |
|---|---|---|
|
mdcUpsInputTableIndex
mandatory
The UPS identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.2.2.1.1.1 |
|
mdcUpsInputVoltage
mandatory
The current utility line voltage in VAC.
|
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.31.2.2.1.1.2 |
.1.3.6.1.4.1.318.1.1.31.2.3.1
·
1 row entry
·
5 columns
A list of UPS output table entries. The number of entries is given by the value of mdcUpsNumUnits.
An entry containing information applicable to a
output of particular UPS.
output of particular UPS.
Indexes
mdcUpsOutputTableIndex
| Column | Syntax | OID |
|---|---|---|
|
mdcUpsOutputTableIndex
mandatory
The UPS identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.2.3.1.1.1 |
|
mdcUpsOutputVoltage
mandatory
The output voltage of the UPS system in VAC.
|
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.31.2.3.1.1.2 |
|
mdcUpsOutputCurrent
mandatory
The current in amperes drawn by the load on the UPS.
|
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.31.2.3.1.1.3 |
|
mdcUpsOutputActivePower
mandatory
The total output active power of the UPS system in W.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.2.3.1.1.4 |
|
mdcUpsOutputFrequency
mandatory
The current output frequency of the UPS system in Hz.
|
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.31.2.3.1.1.5 |
.1.3.6.1.4.1.318.1.1.31.2.4.1
·
1 row entry
·
3 columns
Table of Battery details. The number of entries is given by the value of mdcUpsNumUnits.
An entry containing information applicable to
battery of individual UPS.
battery of individual UPS.
Indexes
mdcUpsBatteryTableIndex
| Column | Syntax | OID |
|---|---|---|
|
mdcUpsBatteryTableIndex
mandatory
The UPS identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.2.4.1.1.1 |
|
mdcUpsBatteryRunTimeRemaining
mandatory
The UPS battery run time remaining before battery
exhaustion. |
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.31.2.4.1.1.2 |
|
mdcUpsBatteryCapacity
mandatory
The remaining battery capacity expressed in
percent of full capacity. |
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.1.31.2.4.1.1.3 |
.1.3.6.1.4.1.318.1.1.31.3.2.1
·
1 row entry
·
4 columns
A list of cooling status table entries. The number of entries is given by the value of mdcCoolingNumUnits.
An entry containing information applicable to a
particular status of cooling unit.
particular status of cooling unit.
Indexes
mdcCoolingStatusTableIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mdcCoolingStatusTableIndex
mandatory
The cooling unit identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.3.2.1.1.1 |
||||||||||||||||
|
mdcCoolingStatusSupplyAirTemp
mandatory
The unit supply air temperature in degree Celsius.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.3.2.1.1.2 |
||||||||||||||||
|
mdcCoolingStatusReturnAirTemp
mandatory
The unit return air temperature in degree Celsius.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.3.2.1.1.3 |
||||||||||||||||
|
mdcCoolingStatusOperateMode
mandatory
The cooling unit operating mode.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.31.3.2.1.1.4 |
.1.3.6.1.4.1.318.1.1.31.3.3.4
·
1 row entry
·
4 columns
A list of cooling configuration table entries. The number of entries is given by the value of mdcCoolingNumUnits.
An entry containing information applicable to
configuration of particular cooling unit.
configuration of particular cooling unit.
Indexes
mdcCoolingConfigTableIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
mdcCoolingConfigTableIndex
mandatory
The cooling unit identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.3.3.4.1.1 |
||||||
|
mdcCoolingConfigOutletAirTemp
mandatory
Outlet air temperature set point. This OID represents the value sent to
the particular cooling unit in degree Celsius. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.3.3.4.1.2 |
||||||
|
mdcCoolingConfigPTCHeater
mandatory
The status of PTC heater of particular cooling unit.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.31.3.3.4.1.3 |
||||||
|
mdcCoolingConfigCondensationpump
mandatory
The status of condensation pump of particular cooling unit.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.31.3.3.4.1.4 |
.1.3.6.1.4.1.318.1.1.31.5.2.1
·
1 row entry
·
6 columns
A list of meter status table entries. The number of entries is given by the value of mdcMeterNumUnits.
An entry containing information applicable to a
particular status of meter.
particular status of meter.
Indexes
mdcMeterStatusTableIndex
| Column | Syntax | OID |
|---|---|---|
|
mdcMeterStatusTableIndex
mandatory
The meter identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.5.2.1.1.1 |
|
mdcMeterFrequency
mandatory
The frequency in Hertz.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.5.2.1.1.2 |
|
mdcMeterVoltage
mandatory
The voltage in Volts as measured by the meter.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.5.2.1.1.3 |
|
mdcMeterCurrent
mandatory
The current in Amps as measured by the meter.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.5.2.1.1.4 |
|
mdcMeterActivePower
mandatory
Shows the active power measured by the meter in hundreths of kW.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.5.2.1.1.5 |
|
mdcMeterApparentPower
mandatory
Shows the apparent power measured by the meter in hundreths of kVA.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.5.2.1.1.6 |
.1.3.6.1.4.1.318.1.1.31.5.3.1
·
1 row entry
·
9 columns
A list of meter configuration table entries. The number of entries is given by the value of mdcMeterNumUnits.
An entry containing information applicable to
configuration of particular meter.
configuration of particular meter.
Indexes
mdcMeterConfigTableIndex
| Column | Syntax | OID |
|---|---|---|
|
mdcMeterConfigTableIndex
mandatory
The meter identifier.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.31.5.3.1.1.1 |
|
mdcMeterMinVoltThreshold
mandatory
Threshold below which an input minimum voltage condition
will be generated. Specified as percent deviation from nominal voltage. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.31.5.3.1.1.2 |
|
mdcMeterLowVoltThreshold
mandatory
Threshold below which an input low voltage condition
will be generated. Specified as percent deviation from nominal voltage. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.31.5.3.1.1.3 |
|
mdcMeterHighVoltThreshold
mandatory
Threshold above which an input high voltage condition
will be generated. Specified as percent deviation from nominal voltage. |
Integer32r/w Constraints: range: 0-120 |
.1.3.6.1.4.1.318.1.1.31.5.3.1.1.4 |
|
mdcMeterMaxVoltThreshold
mandatory
Threshold above which an input maximum voltage condition
will be generated. Specified as percent deviation from nominal voltage. |
Integer32r/w Constraints: range: 0-120 |
.1.3.6.1.4.1.318.1.1.31.5.3.1.1.5 |
|
mdcMeterMinCurrentThreshold
mandatory
Threshold below which an input minimum current condition will be generated.
|
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.31.5.3.1.1.6 |
|
mdcMeterLowCurrentThreshold
mandatory
Threshold below which an input low current condition will be generated.
|
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.31.5.3.1.1.7 |
|
mdcMeterHighCurrentThreshold
mandatory
Threshold above which an input high current condition will be generated.
|
Integer32r/w Constraints: range: 0-110 |
.1.3.6.1.4.1.318.1.1.31.5.3.1.1.8 |
|
mdcMeterMaxCurrentThreshold
mandatory
Threshold above which an input maximum current condition will be generated.
|
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.318.1.1.31.5.3.1.1.9 |
.1.3.6.1.4.1.318.1.1.33.2
·
1 row entry
·
14 columns
This table organizes the identifying data of devices in the device group.
This entry organizes the identity data of a single device.
Indexes
ats5gIdentDeviceIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ats5gIdentDeviceIndex
mandatory
This value is the data entry's index in the identity table.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.318.1.1.33.2.1.1 |
||||||||||||||||
|
ats5gIdentConfigModuleID
mandatory
This value is ID number that can be configured for each device. It cannot be
greater than the maximum number of devices in the network port sharing (NPS) group (32). Changing this value causes the device to reboot, whic… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.2.1.2 |
||||||||||||||||
|
ats5gIdentModuleType
mandatory
This value describes the role the specified device holds in the device group:
notNPS(1) specifies that the device is not in a group host(2) specifies that a device will broadcast firmware updates to guests guest(3) spec… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.2.1.3 |
||||||||||||||||
|
ats5gIdentModuleStatus
mandatory
This value tracks the communication status of a device within the group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.2.1.4 |
||||||||||||||||
|
ats5gIdentSerialNumber
mandatory
This is the serial number of the automatic transfer switch.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.5 |
||||||||||||||||
|
ats5gIdentModelNumber
mandatory
This is the model number of the automatic transfer switch.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.6 |
||||||||||||||||
|
ats5gIdentHardwareRev
mandatory
This is the hardware revision of the automatic transfer switch.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.7 |
||||||||||||||||
|
ats5gIdentManufactureDate
mandatory
This is the manufacture date of the automatic transfer switch.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.8 |
||||||||||||||||
|
ats5gIdentBootmonRev
mandatory
This is the boot monitor firmware revision of the network management card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.9 |
||||||||||||||||
|
ats5gIdentAOSRev
mandatory
This is the operating system firmware revision of the network management card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.10 |
||||||||||||||||
|
ats5gIdentAppRev
mandatory
This is the application firmware revision of the network management card.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.11 |
||||||||||||||||
|
ats5gIdentConfigName
mandatory
This is the configurable name of the device. It may be up to 255 characters long.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.12 |
||||||||||||||||
|
ats5gIdentConfigLocation
mandatory
This is the configurable location of the device. It may be up to 255 characters long.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.13 |
||||||||||||||||
|
ats5gIdentConfigContact
mandatory
This is the configurable contact information of the device. It may be up to 255 characters long.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.2.1.14 |
.1.3.6.1.4.1.318.1.1.33.3
·
1 row entry
·
41 columns
This table organizes the data specific to the automatic transfer switch.
This entry organizes the switch data of a single device.
Indexes
ats5gSwitchDeviceIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ats5gSwitchDeviceIndex
mandatory
This value is the data entry's index in the switching table.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.318.1.1.33.3.1.1 |
||||||||||
|
ats5gSwitchModuleID
mandatory
This value is the ats5gIdentConfigModuleID of the device being queried.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.2 |
||||||||||
|
ats5gSwitchOrientation
mandatory
This value describes the voltage orientation of the ATS.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.3 |
||||||||||
|
ats5gSwitchCumulativeAlarmStatus
mandatory
This is the severity of the most severe alarm currently active.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.4 |
||||||||||
|
ats5gSwitchCommunicationStatus
mandatory
This is the communication status between the network management card
and the automatic transfer switch. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.5 |
||||||||||
|
ats5gSwitchConfigFrontPanelLockout
mandatory
This is the configurable lockout status of the source preference toggle button
on the front panel. The button does nothing while the front panel is locked. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.6 |
||||||||||
|
ats5gSwitchConfigPreferredSource
mandatory
This is the configurable source preference. If the ATS is fully redundant the
preferred source will be the selected source. If the preferred source is none(3), the ATS will switch sources only in response to measured ch… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.7 |
||||||||||
|
ats5gSwitchSelectedSource
mandatory
This is the selected source that will be used to power downstream devices.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.8 |
||||||||||
|
ats5gSwitchRedundancyState
mandatory
This is the ATS redundancy status. While this value is atsFullyRedundant(2),
either input may be used to power downstream devices. While this value is atsRedundancyLost(1), one input has failed validation and downstream… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.9 |
||||||||||
|
ats5gSwitchSourceAStatus
mandatory
This is the input status of source A. The ATS will use source B as the selected source
while this value is fail(1). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.10 |
||||||||||
|
ats5gSwitchSourceBStatus
mandatory
This is the input status of source B. The ATS will use source A as the selected source
while this value is fail(1). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.11 |
||||||||||
|
ats5gSwitchRatedVoltage
mandatory
This is the default nominal line VRMS in volts (V) for this unit.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.12 |
||||||||||
|
ats5gSwitchConfigNominalVoltage
mandatory
This is the configurable line VRMS in volts (V) that will be used to select sources.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.13 |
||||||||||
|
ats5gSwitchConfigTransferVoltageRange
mandatory
This value specifies which voltage transfer range should be used to disqualify
sources and raise alarms. The narrow transfer voltage must be less than the medium transfer voltage, which must be less than the wide transf… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.14 |
||||||||||
|
ats5gSwitchConfigTransferVoltageWide
mandatory
This is the configurable transfer range in volts (V) used to disqualify sources when
ats5gSwitchConfigTransferVoltageRange is wide(1). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.15 |
||||||||||
|
ats5gSwitchConfigTransferVoltageMedium
mandatory
This is the configurable transfer range in volts (V) used to disqualify sources when
ats5gSwitchConfigTransferVoltageRange is medium(2). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.16 |
||||||||||
|
ats5gSwitchConfigTransferVoltageNarrow
mandatory
This is the configurable transfer range in volts (V) used to disqualify sources when
ats5gSwitchConfigTransferVoltageRange is narrow(3). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.17 |
||||||||||
|
ats5gSwitchConfigVoltageSensitivity
mandatory
This is the configured sensitivity threshold for rapid changes to input voltage.
It is recommended to use high(1) unless frequent small changes are expected. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.18 |
||||||||||
|
ats5gSwitchSourceAVoltage
mandatory
This is the measured line VRMS of source A reported in volts (V).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.19 |
||||||||||
|
ats5gSwitchSourceBVoltage
mandatory
This is the measured line VRMS of source B reported in volts (V).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.20 |
||||||||||
|
ats5gSwitchRatedFrequency
mandatory
This is the default nominal line frequency for this unit reported in Hertz (Hz).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.21 |
||||||||||
|
ats5gSwitchConfigNominalFrequency
mandatory
This is the configurable line frequency in Hertz (Hz) that will be used to select
sources. If the difference between ats5gSwitchConfigNominalFrequency and a source's measured frequency is greater than ats5gSwitchConfigF… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.22 |
||||||||||
|
ats5gSwitchConfigFrequencyDeviation
mandatory
This is the configurable frequency deviation in Hertz (Hz) that will be used to select
sources. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.23 |
||||||||||
|
ats5gSwitchSourceAFrequency
mandatory
This is the measured line frequency of source A reported in Hertz (Hz).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.24 |
||||||||||
|
ats5gSwitchSourceBFrequency
mandatory
This is the measured line frequency of source B reported in Hertz (Hz).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.25 |
||||||||||
|
ats5gSwitchEventCountStartTime
mandatory
This value is the time and date of the last event count reset action.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.3.1.26 |
||||||||||
|
ats5gSwitchEventCountRedundancyLoss
mandatory
This value tracks the number of redundancy loss events. It increments each time
a source becomes invalid. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.27 |
||||||||||
|
ats5gSwitchEventCountSourceSwitch
mandatory
This value tracks the number of source switch events. It increments each time the
selected source changes. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.28 |
||||||||||
|
ats5gSwitchEventCountSourcePrefChange
mandatory
This value tracks the number of preferred source configuration change events.
It increments each time the user updates their source preference. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.29 |
||||||||||
|
ats5gSwitchEventCountSpikeOrDrop
mandatory
This value tracks voltage spike and drop events. It increments each time a
source's measured instantaneous voltage increases or decreases rapidly. This depends on configured voltage sensitivity. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.30 |
||||||||||
|
ats5gSwitchEventCountSurgeOrDroop
mandatory
This value tracks voltage surge or droop events. It increments each time a
source's calculated VRMS increases or decreases rapidly. This does not depend on any user configurations. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.31 |
||||||||||
|
ats5gSwitchEventCountFreqOutOfRange
mandatory
This value tracks frequency threshold violations. It increments each time a source
is disqualified because the difference between its measured frequency and the configured nominal frequency is greater than the configure… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.3.1.32 |
||||||||||
|
ats5gSwitchControlEventCountReset
mandatory
This control resets the event counts when the value is set to reset(2).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.33 |
||||||||||
|
ats5gSwitchVoltageOutStatus
mandatory
This value is on(2) while the output outlets are powered.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.34 |
||||||||||
|
ats5gSwitchOverCurrentState
mandatory
This value is atsOverCurrent(1) when the ATS has exceeded the output
current threshold and will not allow a switch over to the alternate power source if the current source fails. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.35 |
||||||||||
|
ats5gSwitchPhaseSyncStatus
mandatory
This value tracks the phase sync status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.36 |
||||||||||
|
ats5gSwitchSourceA24VSupplyStatus
mandatory
This value tracks the internal source A 24VDC power supply status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.37 |
||||||||||
|
ats5gSwitchSourceB24VSupplyStatus
mandatory
This value tracks the internal source B 24VDC power supply status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.38 |
||||||||||
|
ats5gSwitchSourceA48VSupplyStatus
mandatory
This value tracks the internal source A 48VDC power supply status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.39 |
||||||||||
|
ats5gSwitchSourceB48VSupplyStatus
mandatory
This value tracks the internal source B 48VDC power supply status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.40 |
||||||||||
|
ats5gSwitch3p3VSupplyStatus
mandatory
This value tracks the internal 3.3VDC power supply status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.3.1.41 |
.1.3.6.1.4.1.318.1.1.33.4
·
1 row entry
·
18 columns
This table organizes the data specific to the environment monitoring accessories.
This entry organizes the switch data of a single device.
Indexes
ats5gEnvDeviceIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ats5gEnvDeviceIndex
mandatory
This value is the data entry's index in the environment table.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.318.1.1.33.4.1.1 |
||||||||||
|
ats5gEnvModuleID
mandatory
This value is the ats5gIdentConfigModuleID of the device being queried.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.2 |
||||||||||
|
ats5gEnvSensorType
mandatory
This value is the type of the currently attached sensor accessory.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.4.1.3 |
||||||||||
|
ats5gEnvAlarmStatus
mandatory
This is the severity of the most severe environment-specific alarm currently active.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.4.1.4 |
||||||||||
|
ats5gEnvTemperature
mandatory
This is the measured temperature of the attached sensor reported in tenth-degrees
Fahrenheit. The value reports as -1 if the attached sensor does not support temperature measurements. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.5 |
||||||||||
|
ats5gEnvConfigTempMaxThreshold
mandatory
This is the configured maximum temperature threshold reported in degrees Fahrenheit.
The value reports as -1 if the attached sensor does not support temperature measurements. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.6 |
||||||||||
|
ats5gEnvConfigTempHighThreshold
mandatory
This is the configured high temperature threshold reported in degrees Fahrenheit.
The value reports as -1 if the attached sensor does not support temperature measurements. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.7 |
||||||||||
|
ats5gEnvConfigTempHysteresis
mandatory
This is the configured temperature threshold hysteresis reported in degrees Fahrenheit.
The value reports as -1 if the attached sensor does not support temperature measurements. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.8 |
||||||||||
|
ats5gEnvConfigTempAlarmsEnabled
mandatory
This is the configured temperature monitoring status. While this value is disabled(1),
no temperature-related alarms will be active. The value reports as -1 if the attached sensor does not support temperature measuremen… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.4.1.9 |
||||||||||
|
ats5gEnvHumidity
mandatory
This is the measured humidity around the attached sensor reported in percent relative
humidity. The value reports as -1 if the attached sensor does not support humidity measurements. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.10 |
||||||||||
|
ats5gEnvConfigHumLowThreshold
mandatory
This is the configured low humidity threshold reported in %RH. The value reports as -1
if the attached sensor does not support humidity measurements. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.11 |
||||||||||
|
ats5gEnvConfigHumMinThreshold
mandatory
This is the configured minimum humidity threshold reported in %RH. The value reports
as -1 if the attached sensor does not support humidity measurements. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.12 |
||||||||||
|
ats5gEnvConfigHumHysteresis
mandatory
This is the configured humidity threshold hysteresis reported in %RH. The value reports
as -1 if the attached sensor does not support humidity measurements. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.13 |
||||||||||
|
ats5gEnvConfigHumAlarmsEnabled
mandatory
This is the configured humidity monitoring status. While this value is disabled(1),
no humidity-related alarms will be active. The value reports as -1 if the attached sensor does not support humidity measurements. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.4.1.14 |
||||||||||
|
ats5gEnvPeakTemperature
mandatory
This is the highest temperature recorded since the last peak temperature reset,
reported in degrees Fahrenheit. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.4.1.15 |
||||||||||
|
ats5gEnvPeakTempTime
mandatory
This is the date and time that the peak temperature was recorded.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.4.1.16 |
||||||||||
|
ats5gEnvPeakTempResetTime
mandatory
This is the date and time that the peak temperature was last reset.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.1.33.4.1.17 |
||||||||||
|
ats5gEnvControlPeakTempReset
mandatory
This control resets the peak temperature when the value is set to reset(2).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.4.1.18 |
.1.3.6.1.4.1.318.1.1.33.6
·
1 row entry
·
10 columns
This table organizes the bank data of devices in the device group.
This entry organizes the bank data of a single device.
Indexes
ats5gBankIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
ats5gBankIndex
mandatory
This value is the data entry's index in the bank table.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.318.1.1.33.6.1.1 |
||||||||
|
ats5gBankModuleID
mandatory
This value is the ats5gIdentConfigModuleID of the device being queried.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.6.1.2 |
||||||||
|
ats5gBankType
mandatory
This value describes the type of bank associated with this bank index. If a device
has multiple banks, then its total(1) output will include the bank1(2) and bank2(3) outputs. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.6.1.3 |
||||||||
|
ats5gBankRatedAmps
mandatory
This value is the rated output of the specified bank reported in amps (A).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.6.1.4 |
||||||||
|
ats5gBankOutputTenthAmps
mandatory
This value is the measured output of the specified bank reported in tenths of amps (A).
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.6.1.5 |
||||||||
|
ats5gBankConfigLowLoadThreshold
mandatory
This value is the configured low load threshold of the specified bank reported
in amps (A). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.6.1.6 |
||||||||
|
ats5gBankConfigNearOverLoadThreshold
mandatory
This value is the configured near overload threshold of the specified bank reported
in amps (A). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.6.1.7 |
||||||||
|
ats5gBankConfigOverloadThreshold
mandatory
This value is the configured overload threshold of the specified bank reported
in amps (A). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.6.1.8 |
||||||||
|
ats5gBankApparentPower
mandatory
This value is the calculated apparent power of the specified bank reported
in kilovolt-amps (kVA). |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.1.33.6.1.9 |
||||||||
|
ats5gBankOutputCurrentStatus
mandatory
This value tracks the load status of the specified bank.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.1.1.33.6.1.10 |
.1.3.6.1.4.1.318.1.2.1.2.2
·
1 row entry
·
4 columns
A list of the software monitoring the UPS.
An entry containing information on a software module.
Indexes
moduleNumber
| Column | Syntax | OID |
|---|---|---|
|
moduleNumber
mandatory
The index into the Software Entry Table
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.2.1.2.2.1.1 |
|
moduleName
mandatory
The name of the software module.
|
OctetString Constraints: range: 0-79 |
.1.3.6.1.4.1.318.1.2.1.2.2.1.2 |
|
moduleVersion
mandatory
The version of the software module.
|
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.318.1.2.1.2.2.1.3 |
|
moduleDate
mandatory
The date of the software module represented as mm-dd-yy.
|
OctetString Constraints: range: 0-9 |
.1.3.6.1.4.1.318.1.2.1.2.2.1.4 |
.1.3.6.1.4.1.318.1.2.3.3.4
·
1 row entry
·
3 columns
The Network Management Cards in the UPS devices, which PCNS is monitoring to provide safe shutdown.
Details of the NMC.
Indexes
pcnsNmcIndex
| Column | Syntax | OID |
|---|---|---|
|
pcnsNmcIndex
mandatory
Index of the NMC within PCNS setup.
|
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.2.3.3.4.1.1 |
|
pcnsNmcAddr
mandatory
The IP address of the NMC.
|
RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.1.2.3.3.4.1.2 |
|
pcnsNmcOutlet
mandatory
The Outlet Group which PCNS is enrolled with on the NMC.
|
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.2.3.3.4.1.3 |
.1.3.6.1.4.1.318.1.2.3.5.9
·
1 row entry
·
11 columns
The Network Management Cards in the UPS devices, which PCNS is monitoring to provide safe shutdown.
Details of the NMC.
Indexes
pcnsAdvancedGroupNo
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pcnsAdvancedGroupNo
mandatory
Index of the Advanced Shutdown Group.
|
RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.318.1.2.3.5.9.1.1 |
||||
|
pcnsAdvancedGroupName
mandatory
Name of the Advanced Shutdown Group.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.318.1.2.3.5.9.1.2 |
||||
|
pcnsAdvancedGroupNMC
mandatory
List of NMCs in the Advanced Shutdown Group.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.2.3.5.9.1.3 |
||||
|
pcnsAdvancedShutdownUPSRequiredForLoad
mandatory
Number of UPS devices required to power load.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.2.3.5.9.1.4 |
||||
|
pcnsAdvancedShutdownCommandFileEnabled
mandatory
Run a shutdown command file before performing graceful shutdown.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.2.3.5.9.1.5 |
||||
|
pcnsAdvancedShutdownCommandFile
mandatory
Full name of the shutdown command file to run before graceful shutdown.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.1.2.3.5.9.1.6 |
||||
|
pcnsAdvancedShutdownCommandFileDuration
mandatory
How long in seconds shutdown command file takes to run.
|
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.1.2.3.5.9.1.7 |
||||
|
pcnsAdvancedShutdownPowerchuteServer
mandatory
Shut down PowerChute Server.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.2.3.5.9.1.8 |
||||
|
pcnsAdvancedShutdownOnLostRedundancy
mandatory
Shut down if Redundancy lost.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.2.3.5.9.1.9 |
||||
|
pcnsAdvancedTurnOffUps
mandatory
Turn off the UPS when performing a graceful shutdown.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.2.3.5.9.1.10 |
||||
|
pcnsAdvancedTurnOffSOG
mandatory
Turn off the Outlet Group on the UPS when performing a graceful shutdown.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.1.2.3.5.9.1.11 |
.1.3.6.1.4.1.318.2.1.2
·
1 row entry
·
6 columns
A list of managers to send traps to. The number of entries is given by the value of mconfigNumTrapReceivers.
The managers to send traps to.
Indexes
trapIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
trapIndex
mandatory
The index to a trap receiver entry.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.318.2.1.2.1.1 |
||||||
|
receiverAddr
mandatory
The IP address of the manager to send a trap to.
|
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.318.2.1.2.1.2 |
||||||
|
communityString
mandatory
The community name to use in the trap when
sent to the manager. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.318.2.1.2.1.3 |
||||||
|
severity
obsolete
The severity threshold of traps to send to the manager.
traps are labeled in severity as informational(1), warning(2), severe(3). Only traps of equal or greater severity than this value are sent to the manager. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.2.1.2.1.4 |
||||||
|
acceptThisReceiver
mandatory
The value of yes(1) indicates that trap generation for this manager is enabled.
The value of no(2) indicates that trap generation for this manager is disabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.318.2.1.2.1.5 |
||||||
|
receiveTrapType
obsolete
Type of trap.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.318.2.1.2.1.6 |