isxModularDistModuleOutputBreakerMap

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.22.2.6.1.8
MIB view Table view

Object

column mandatory Integer32 
This is a bit map representing the breaker poles within the
module that are associated with this distribution cable.
The following 3 bits are used to indicate the indices of
the breakers feeding the cable:
              
  b0 - Module breaker L1
  b1 - Module breaker L2
  b2 - Module breaker L3
              
If a bit is set, the breaker is used to feed this distribution cable.
These breakers are described in the table isxModularDistModuleBreakerTable,
and indexed by the OID isxModularDistModuleBreakerPhaseIndex.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.22.2.6.1.8
Type
column
Access
readonly
Status
mandatory
Parent
isxModularDistModuleOutputEntry
Table
isxModularDistModuleOutputTable
Siblings
22

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
isxModularDistModuleOutputModIndex mandatory
The number of the distribution module supplying power to the load equipment.
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.1
isxModularDistModuleOutputThresholdLow mandatory
When the current drops below this value a warning alarm will exist.
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.10
isxModularDistModuleOutputThresholdHigh mandatory
When the current exceeds this value a warning alarm will exist.
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.11
isxModularDistModuleOutputThresholdMax mandatory
When the current exceeds this value a critical alarm will exist.
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.12
isxModularDistModuleOutputAlarmMinEnable mandatory
Enable or disable minimum current alarm generation for this distribution cable.
columnEnumeration.1.3.6.1.4.1.318.1.1.22.2.6.1.13
isxModularDistModuleOutputAlarmLowEnable mandatory
Enable or disable low current alarm generation for this distribution cable.
columnEnumeration.1.3.6.1.4.1.318.1.1.22.2.6.1.14
isxModularDistModuleOutputAlarmHighEnable mandatory
Enable or disable high current alarm generation for this distribution cable.
columnEnumeration.1.3.6.1.4.1.318.1.1.22.2.6.1.15
isxModularDistModuleOutputAlarmMaxEnable mandatory
Enable or disable maximum current alarm generation for this distribution cable.
columnEnumeration.1.3.6.1.4.1.318.1.1.22.2.6.1.16
isxModularDistModuleOutputCableLength mandatory
The length of this distribution cable. Specified in tenths of meters.
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.17
isxModularDistModuleOutputConnectorType mandatory
A string describing the connector on the end of this distribution cable.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.22.2.6.1.18
isxModularDistModuleOutputAvailableVoltages mandatory
This is a bit map representing the voltages that are available at the connector. 6 bits are used to indicate the following: b0 - L1 b1 - L2 b2 - L3 b3 - L1-…
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.19
isxModularDistModuleOutputNumCables mandatory
The number of distribution cables provided by this module.
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.2
isxModularDistModuleOutputTotalPower mandatory
The total power being consumed by the load equipment supplied by this distribution cable. Measured in tenths of kW.
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.20
isxModularDistModuleOutputKwhUsage mandatory
The total energy consumed by the load equipment fed by this distribution cable. This is the total since the date specified in the isxModularDistModuleOutputKwhResetDate OID, and m…
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.21
isxModularDistModuleOutputKwhReset mandatory
Writing yes to this OID will reset the total kWh usage shown in the isxModularDistModuleOutputKwhUsage OID.
columnEnumeration.1.3.6.1.4.1.318.1.1.22.2.6.1.22
isxModularDistModuleOutputKwhResetDate mandatory
The date that the kWh usage was reset, in the format mm/dd/yyyy. Example: 01/01/2000.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.22.2.6.1.23
isxModularDistModuleOutputCordIndex mandatory
The index of an individual distribution cable supplied by this module.
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.3
isxModularDistModuleOutputName mandatory
A string describing the load equipment being supplied by this distribution cable.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.22.2.6.1.4
isxModularDistModuleOutputLocation mandatory
A string describing the location of equipment being supplied by distribution cable.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.22.2.6.1.5
isxModularDistModuleOutputStatus mandatory
This reflects the worse case severity for alarms associated with this distribution cable. A value of notPresent indicates that the cable does not exist for this module. A value of…
columnEnumeration.1.3.6.1.4.1.318.1.1.22.2.6.1.6
isxModularDistModuleOutputAlarmGeneration mandatory
Enable or disable all alarm generation related to this distribution cable.
columnEnumeration.1.3.6.1.4.1.318.1.1.22.2.6.1.7
isxModularDistModuleOutputThresholdMin mandatory
When the current drops below this value a critical alarm will exist.
columnInteger32.1.3.6.1.4.1.318.1.1.22.2.6.1.9